Electrolytically initiated polymerization of N-vinylcarbazole

Polymerization of N-vinylcarbazole was studied systematically using electroinitiation with several quaternary ammonium salts as electrolytes in methylene chloride solution. Polymer was obtained only when the following electrolytes were used: tetraethylammonium perchlorate, tetrabutylammonium perchlorate, and tetrabutylammonium fluoroborate. Polymeric products of molecular weight 10⁴–10⁵ were formed in the anodic compartment of a divided cell. IR and ¹³C-NMR spectra showed that the structures of the polymers were similar to those produced by conventional cationic polymerization, which suggests a similar mechanism for the resulting anodic product.     

Synthesis of 5-acetyl derivatives of alkyl 2-furoates and 3-(2-furyl)acrylates

Methyl 5-acetyl-2-furoate has been prepared via oxidation of 5-(1-hydroxyethyl)-2-furoate with the Jones reagent. In turn, the starting compound has been synthesized via sequential chloroethylation of ethyl 2-furoate, substitution of chlorine with acetoxy group, and methanolysis of the acetate in presence of sodium methylate. The vinylog 2-furoate has been obtained as the major product via acetylation of ethyl 3-(2-furyl)-acrylate with acetic anhydride in the presence of magnesium perchlorate.

     

Catalytic acetylation of flavonoids

Chemistry of Natural Compounds - On catalytic acetylation in the presence of magnesium perchlorate, flavonoids do not react with the catalyst. The highest yield of product was found when using the...     

Fluorescence spectra,fluorescence quantum yields and fluorescence lifetimes of polymers having trans-1,2-dicarbazolylyclobutane or carbazolyl group

Quantum yields, lifetimes and shapes of fluorescence from polymers containing the trans-1,2-dicarbazolylcyclobutane (DCZB) or carbazolyl structures were studied in N,N-dimethylformamide. No sandwich-type excimer formation was observed for DCZB polymers. The so-called second excimer observed in poly(9-vinylcarbazole) might also be produced in poly(9-ethyl-3-vinylcarbazole).     

The use of magnesium perchlorate as desiccant in the syringe injection technique for determination of mercury by cold-vapour atomic absorption spectrometry

The method developed earlier was found to suffer a loss in sensitivity when the magnesium perchlorate desiccant became damp. The most sensitive and consistent results were obtained when the magnesium perchlorate was removed from the sample injection manifold. Under most circumstances a desiccant is not required.     

Magnesium ion mediated protonation of imines in acetonitrile

Addition of magnesium perchlorate to a solution of imine PhCHN-C₄H₉ ($\text{1}$) and diimine PhCHN(CH₂)₃NCHPh ($\text{4}$), in acetonitrile, results in the formation of the corresponding iminium salts due to traces of water present in the solvent. This conclusion is based upon infrared spectra of solutions of imines, iminium salts, deuterated iminium salts and mixtures of imines and magnesium perchlorate in acetonitrile, containing varying amounts of water. The results suggest that magnesium ion catalyzed reactions of imines in CH₃CN involve iminium intermediates.     

Compleximetric determination of calcium in impure calcium carbonate and limestone

Calcium is determined in impure calcium carbonate and limestone samples by titrating with 0.01 M disodium EGTA at pH 12 in the presence of at least 0.6 mg of magnesium and a maximum of 500 μg of iron(III), using a pH 12.5 sodium hydroxide-potassium cyanide-sodium sulfide buffer and Calcon indicator. The results of such titrations are compared with those obtained by titrating at pH 10 the calcium perchlorate solutions derived from calcium oxalate, and with those of a modified LEWIS AND MELNICK method. The results for magnesium (% MgO) obtained by difference are in fair agreement. Magnesium can be titrated compleximetrically as magnesium perchlorate, but the reagent blank must be determined.     

Optically active vinyl polymers containing fluorescent groups—7: The distribution of monomeric units in cationically prepared copolymers of 9-vinylcarbazole and (−)menthyl vinyl ether

u.v. Absorption, ¹H-NMR, fluorescence emission and circular dichroism spectra together show clearly that stereoregular copolymers obtained cationically from 9-vinylcarbazole and (?)menthyl vinyl ether have significant block-like character. In contrast to results for related optically active copolymers, plots of circular dichroism absorption intensity versus copolymer composition exhibit a pronounced maximum corresponding to a molar composition 20% 9-vinylcarbazole, 80% (?)menthyl vinyl ether. This maximum does not correspond, as expected, with the presence of isolated carbazole units in a chiral polymer environment.     

Preparation of perlite-based magnesium perchlorate desiccant with colour indicator

A new desiccant consisting of magnesium perchlorate, expanded perlite and metal chelate was prepared. The performance tests show that the desiccant is superior to magnesium perchlorate desiccant in dehydration efficiency, absorption capacity for water, flow resistance, color indicator and regeneration. It can reduce the amount of water in gases to approximately 0.7 ppm(v/v). Its applications in gas analysis and purification were investigated.     

Selective oxygenation of 4,4'-dimethylbiphenyl with molecular oxygen, catalyzed by 9-phenyl-10-methylacridinium ion via photoinduced electron transfer

Photooxygenation of 4,4'-dimethybiphenyl with oxygen occurs efficiently in the presence of 9-phenyl-10-methylacridinium perchlorate (AcrPh(+)ClO(4)(-)) under visible light irradiation in O(2)-saturated chloroform (CHCl(3)) to yield 4-(4'-methylphenyl)benzaldehyde as a main oxygenated product. Prolonged photoirradiation afforded the further oxygenated product, 4,4'-diformylbiphenyl. The reactive radical intermediates involved in the photocatalytic cycle have successfully been detected by laser flash photolysis and electron spin resonance (ESR) measurements. The photocatalytic mechanism for the oxygenation of 4,4'-dimethybiphenyl via photoinduced electron transfer from 4,4'-dimethybiphenyl to the singlet excited state of AcrPh(+) is clarified based on the dependence of quantum yields on concentrations of substrates and the detected radical intermediates.     

“Living” free radical copolymerization of styrene and N-vinylcarbazole

Poly[styrene-co-(N-vinylcarbazole)] copolymers with controlled molecular weights and narrow polydispersities were synthesized by nitroxide-mediated “living” free radical copolymerization using an initiator/capping agent system consisting of benzoyl peroxide (BPO) and the stable nitroxyl radical 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO). The copolymerization behaves in a “living” fashion and allows the synthesis of poly[styrene-co-(N-vinylcarbazole)]/polystyrene block copolymers via a controlled chain-extension reaction of the prepared copolymers with styrene.     

Ferric Perchlorate-Mediated Synthesis of 1,2-Fullerenols C(60)(OCOR)(OH)

1,2-Fullerenols C(60)(OCOR)(OH) have been facilely synthesized via the one-step reaction of [60]fullerene with acid chlorides promoted by ferric perchlorate. A possible reaction mechanism for the product formation is proposed.     

An extremely efficient three-component reaction of aldehydes/ketones, amines, and phosphites (Kabachnik-Fields reaction) for the synthesis of alpha-aminophosphonates catalyzed by magnesium perchlorate

Commercially available magnesium perchlorate is reported as an extremely efficient catalyst for the synthesis of alpha-aminophosphonates. A three-component reaction (3-CR) of an amine, an aldehyde or a ketone, and a di-/trialkyl phosphite (Kabachnik-Fields reaction) took place in one pot under solvent-free conditions to afford the corresponding alpha-aminophosphonates in high yields and short times. The use of solvent retards the rate of the reaction and requires a much longer reaction time than that for neat conditions. The reactions involving an aldehyde, an aromatic amine without any electron-withdrawing substituent, and a phosphite are carried out at rt. The reactions involving cyclic ketones, aromatic amines with an electron-withdrawing substituent, and aryl alkyl ketone (e.g., acetophenone) require longer reaction times at rt or heating. Magnesium perchlorate was found to be superior to other metal perchlorates and metal triflates during the reaction of 4-methoxybenzaldehyde, 2,4-dinitroaniline, and dimethyl phosphite. The catalytic activity of various magnesium compounds was influenced by the counteranion, and magnesium perchlorate was found to be the most effective. The reaction was found to be general with di-/trialkyl phosphites and diaryl phosphite. The Mg(ClO4)2-catalyzed alpha-aminophosphonate synthesis in the present study perhaps represents a true three-component reaction as no intermediate formation of either an imine or alpha-hydroxy phosphonate was observed that indicated the simultaneous involvement of the carbonyl compound, the amine, and the phosphite in the transition state.     

FLAVIN-PHOTOSENSITIZED MONOMERIZATION OF DIMETHYLTHYMINE CYCLOBUTANE DIMER IN THE PRESENCE OF MAGNESIUM PERCHLORATE

We have investigated the photosensitized monomerization of the cis,syn -cyclobutane dimer of 1,3-di-methylthymine using riboflavin tetraacetate and a 5-deazaflavin derivative as photosensitizer. Although little monomerization of the dimer is induced by photoexcitation of the flavins in the absence of any additives, the flavins can function as an efficient photosensitizer in the presence of magnesium perchlorate. Mechanistic studies involving spectroscopic, quantum-yield and flash-photolysis measurements demonstrated that the photosensitized monomerization exclusively proceeds through electron transfer from the dimer to the triplet flavins complexed with Mg²⁺. The effects of magnesium perchlorate are compared with those on the chloranil-photosensitized monomerization and also with the effects of HClO₄ on the flavin-photosensitized reaction.     

Phase inversion cellulose acetate membranes for suppression of protein interferences in anodic stripping voltammetry 2(1). Improvement of the membrane preparation procedure

Phase inversion (PI) cellulose acetate membranes were cast on glassy carbon electrodes from a solution containing acetone as solvent and aqueous magnesium perchlorate as pore former. It is shown that a significant improvement of the reproducibility and permselective properties of the membrane is obtained by allowing complete evaporation of the solvent in a controlled humidity environment before the membrane is gelated. By using cadmium and lead as test analytes and differential pulse anodic stripping voltammetry as the detection method, it was found that the modification of the electrode greatly reduces the interference from albumin, lysozyme, gelatin and polyethylene glycol (MW 6000). The permselectivity of the PI membrane can be controlled by varying the amount of magnesium perchlorate in the casting solution and the relative humidity during the pre-gelation conditioning of the membrane.     

9-Mesityl-10-methylacridinium: an efficient type II and electron-transfer photooxygenation catalyst

The visible-light irradiation of 9-mesityl-10-methylacridinium perchlorate 1 in the presence of monoalkenes and molecular oxygen leads to typical products of singlet oxygen addition (type II photooxygenation). The molecular probes 1-methylcyclohexene and limonene, respectively, result in hydroperoxide mixtures with a characteristic product pattern. A switch in the oxidative mechanism (electron-transfer photooxygenation) is observed for naphthalene derivatives as electron-rich acceptor molecules, revealing that the 9-mesityl-10-methylacridinium cation serves as a dual sensitizer with the capacity of efficient singlet oxygen formation and electron-transfer reaction. [reaction: see text].     

Apparent Molar Volumes of Multicharged Cations in Dimethyl Sulfoxide Solutions at 25°C

Densities for DMSO solutions of iron(III), aluminium(III), beryllium(II) and magnesium(II) perchlorates and silver nitrate are reported. Densities for DMSO solutions of tetraethylammonium perchlorate and nitrate and tetrabutylammonium perchlorate and tetraphenylborate are also presented. The partial molar volumes of the DMSO-solvated cations are derived and discussed in terms of variation with the charge number.     

Alkylation of tertiary arsines with methylene bromide and subsequent anion exchange

Tertiary arsines react with methylene bromide to give (bromomethyl)trialkyl(aryl)arsonium bromides. Treatment of the latter with magnesium perchlorate in aqueous ethanol solutions leads to anion exchange forming the corresponding tertiary arsonium perchlorates in nearly quantitative yields.     

Practical Synthesis of Sugar Monophosphonucleotides

A reliable procedure for the preparation of sugar nucleoside monophosphates is presented, which involves condensation of an activated glycosyl‐1‐H‐phosphonate with an appropriately protected nucleoside and simple end‐product isolation via lithium perchlorate–induced precipitation. The utility of these methods is demonstrated by the preparation of a number of purine‐ and pyrimidine‐based sugar nucleoside monophosphate derivatives.     

Photochemically catalyzed Diels-Alder reaction of arylimines with N-vinylpyrrolidinone and N-vinylcarbazole by 2,4,6-triphenylpyrylium salt: synthesis of 4-heterocycle-substituted tetrahydroquinoline derivatives

Photochemically promoted Diels-Alder reactions of N-arylimines with N-vinylpyrrolidinone and N-vinylcarbazole were achieved by using 2,4,6-triphenylpyrylium tetrafluoroborate as a catalyst to produce corresponding 2-oxopyrrolidin-1-yl and carbazol-9-yltetrahydroquinolines in high yields.