Effect of Oxygen on the Quantum,Magnetic, and Thermodynamic Properties of Co Nanowires on the Reconstructed Anisotropic (1 × 2)/Au(110) and (1 × 2)/Pt(110) Surfaces: Ab Initio Approach

Ab initio theoretical study of the quantum magnetic properties of Co nanowires on the pure and oxygen-reconstructed (1 × 2)/Au(110) and (1 × 2)/Pt(110) surfaces is performed. Their structures and electronic configurations are calculated using the electron density functional theory. High values of magnetic moment and magnetic anisotropy energies of Co atoms are found on both pure and oxygen-reconstructed (1 × 2)/Au(110) and (1 × 2)/Pt(110) surfaces. The adsorption of oxygen atoms on the (1 × 2)/Au(110) substrate is shown to affect the structural arrangement of Co nanowire atoms on this substrate and to increase the magnetic anisotropy energy (by 1.91 meV per nanowire atom). The adsorption of oxygen on the Pt(110) substrate substantially decreases the magnetic anisotropy energy of the Co nanowire on it (by 5.98 meV per atom). The origin of these changes is revealed by analyzing the local densities of states of the d electrons of nanowire atoms. The temperature ranges of the states with the lowest free surface energy are determined using the atomistic thermodynamics methods. These data and the available experimental data are used to predict the possibility of observing the structures under study in experiments.     

Room-temperature ferromagnetism in carbon-doped ZnO

We report ferromagnetism in carbon-doped ZnO. Our first-principles calculations based on density functional theory predicted a magnetic moment of 2.02 mu(B) per carbon when carbon substitutes oxygen in ZnO, and an ferromagnetic coupling among magnetic moments of the carbon dopants. The theoretical prediction was confirmed experimentally. C-doped ZnO films deposited by pulsed-laser deposition showed ferromagnetism with Curie temperatures higher than 400 K. The measured magnetic moment based on the content of carbide in the films [(1.5-3.0) mu(B) per carbon] was in agreement with the theoretical prediction. The magnetism is due to the Zn-C system in the ZnO environment.     

B36团簇组装一维纳米线的密度泛函研究

采用密度泛函理论计算方法系统研究了B₃₆团簇组装一维纳米线的几何结构、电子结构及稳定性.发现两种不同构型的B₃₆团簇组装纳米线静态结构能量相同,且均为动力学稳定结构,但二者电子结构明显不同:分别呈现出半金属和小带隙半导体特征.对两类纳米线的H原子吸附显示:半金属纳米线转变为半导体,而半导体纳米线仍保持为半导体,但带隙明显增大.表明H原子吸附对于B₃₆团簇组装纳米线的电子结构具有明显的调控作用.     

Electronic and magnetic properties of multishell Co nanowires coated with Cu

The structural, electronic, and magnetic properties of ultrathin Cu-coated Co nanowires have been studied by using empirical genetic algorithm simulations and a tight-binding spd model Hamiltonian in the unrestricted Hartree-Fock approximation. For some specific stoichiometric compositions, Cu atoms occupy the surface, while Co atoms prefer to stay in the interior, forming the perfect coated multishell structures. The outer Cu layers lead to substantial variations in the magnetic moment of interior Co atoms, depending on the structure and thickness of Cu layers. In particular, single Co atom row at the center of nanowire is found to be nonmagnetic when coated with two Cu layers. All the other Co nanowires in the coated Cu shell are still magnetic but the magnetic moments are reduced as compared with Co nanowires without Cu coating. The interaction between Cu and Co atoms induces nonzero magnetic moment for Cu atoms.     

Designing copper–zirconium based nanowires for improving yield strength and plasticity by configuring surface atoms

Epitaxial-Bain-Path and Uniaxial-Bain-Path studies reveal that a B2-CuZr nanowire with Zr atoms on the surface is energetically more stable compared to a B2-CuZr nanowire with Cu atoms on the surface. Nanowires of cross-sectional dimensions in the range of ~20–50 Å are considered. Such stability is also correlated with the initial state of stress in the nanowires. It is also demonstrated here that a more stable structure, i.e., B2-CuZr nanowire with Zr atoms at surface shows improved yield strength compared to B2-CuZr nanowire with Cu atoms at surface site, over range of temperature under both the tensile and the compressive loadings. Nearly 18% increase in the average yield strength under tensile loading and nearly 26% increase in the averaged yield strength under compressive loading are observed for nanowires with various cross-sectional dimensions and temperatures. It is also observed that the B2-CuZr nanowire with Cu atom at the surface site shows a decrease in failure/plastic strain with an increase in temperature. On the other hand, B2-CuZr nanowires with Zr at the surface site shows an improvement in failure/plastic strain, specially at higher temperature as compared to the B2-CuZr nanowires which are having Cu atoms at the surface site. Finally, a possible design methodology for an energetically stable nano-structure with improved thermo-mechanical properties via manipulating the surface atom configuration is proposed.     

Structural,electronic and magnetic properties of hcp Fe,Co and Ni nanowires encapsulated in zigzag carbon nanotubes

The structural, electronic and magnetic properties of hcp transition metal (TM = Fe, Co or Ni) nanowires TM₄ encapsulated inside zigzag nanotubes C(m, 0) (m = 7, 8, 9, 10, 11 or 12), along with TM _n (n = 4, 10 or 13) encapsulated inside C(12, 0), have been systematically investigated using the first-principle calculations. The results show that the TM nanowires can be inserted inside a variety of zigzag carbon nanotubes (CNTs) exothermically, except from the systems TM₄@(7, 0) and TM₁₃@(12, 0) which are endothermic. The charge is transferred from TM nanowires to CNTs, and the transferred charge increases with decreasing CNT diameter or increasing nanowire thickness. The magnetic moments of hybrid systems are smaller than those of the freestanding TM nanowires, especially for the atoms on the outermost shell of the nanowires. The magnetic moment per TM atom of TM/CNT system increases with increasing CNT diameter or decreasing nanowire thickness. Both the density of states and spin charge density analysis show that the spin polarization and the magnetic moments of all hybrid systems mainly originate from the TM nanowires, implying these systems can be applied in magnetic data storage devices.     

Magnetism of nanowires driven by novel even-odd effects

The parity of the number of atoms in finite antiferromagnetic nanowires deposited on ferromagnets is shown to be a crucial quantity determining their magnetic ground state. Relating results of the full-potential Korringa-Kohn-Rostoker method for noncollinear magnetism from first principles to a Heisenberg model, we show that the magnetic structure changes dramatically across the entire nanowire if one single atom is added to it. Infinite and finite even-numbered nanochains exhibit always noncollinear magnetism, while odd-numbered wires lead under given conditions to a collinear ferrimagnetic ground state. This extremely nonlocal effect occurs only for nanosized wires.     

电化学沉积Fe与FePd纳米线阵列的磁性

利用电化学沉积方法在氧化铝模板中制备了一维Fe和Fe_095Pd_{0 05}合金纳米线阵列.两种样品均有(110)晶向择优取向，纳米线直径为60nm.在这一直径下形状各向异性 和内禀晶体各向异性的竞争结果很适合考察Pd掺杂的磁性行为.研究发现在FePd纳米线中， 由于极少量Pd在Fe中的合金化，减弱了晶体各向异性与形状各向异性的影响，改变了磁畴结 构，增强了畴壁钉扎作用，结果在Fe_095Pd_005纳米线 中便显示出强烈的沿线方向的各向异性，方形度和矫顽力也有较大改善. 关键词： 纳米线 电化学沉积 磁性     

Magnetic and electronic properties of Fe/Cu multilayered nanowires: A first-principles investigation

By using the first-principles calculations, we have systematically investigated the equilibrium structure, magnetic and electronic properties of one-dimensional Fe/Cu multilayered nanowires. We find that the stability of the Fe/Cu multilayered nanowires decreases with increasing concentration of nonmagnetic Cu layers, suggesting that rich Fe nanowires are more stable. Analysis of the average magnetic moment (μ_av) per Fe atom in the Fe/Cu multilayered nanowire suggests that there is a slight increase in μ_av with the increase in the number of nonmagnetic Cu layers, which was attributed to the increased Fe–Cu distance with increase in the Cu layers at interfacial layers. Furthermore, analysis of the band structures of these nanowires suggests strong dependence of conductance on the nonmagnetic Cu spacer layer thickness and a half-metallic character is observed for moderate Cu atoms substitutions, opening up the possibility for their application in magnetoelectronics or spintronics.     

Ferromagnetism driven by cation vacancy in GaN thin films and nanowires

The first-principles calculations have been performed to understand the origin of magnetism in undoped GaN thin films. The results show that Ga vacancy, rather than that of N contributes the observed magnetism, and the magnetic moments mainly come from the unpaired 2p electrons at nearest-neighbor N atoms of the Ga vacancy. Calculations and discussions are also extended to bare and passivated GaN nanowires, We find that per Ga vacancy on the surface sites products the total magnetic moment of 1.0  while that inside of the nanowires can lead to the formation of a net moment of 3.0 . The coupling between two Ga vacancies is also studied and we found that the coupling is ferromagnetic coupling. The surface passivation with hydrogen is shown to strongly enhance the ferromagnetism. Our theoretical study not only demonstrates that GaN nanowire can be magnetic even without transition-metal doping, but also suggests that introducing Ga vacancy is a natural and an effective way to fabricate low-dimensional magnetic GaN nanostructures.     

Evidence for spontaneous spin-polarized transport in magnetic nanowires

The exploitation of the spin in charge-based systems is opening revolutionary opportunities for device architecture. Surprisingly, room temperature electrical transport through magnetic nanowires is still an unresolved issue. Here, we show that ferromagnetic (Co) suspended atom chains spontaneously display an electron transport of half a conductance quantum, as expected for a fully polarized conduction channel. Similar behavior has been observed for Pd (a quasimagnetic 4d metal) and Pt (a nonmagnetic 5d metal). These results suggest that the nanowire low dimensionality reinforces or induces magnetic behavior, lifting off spin degeneracy even at room temperature and zero external magnetic field.     

聚铜络合物[Cu(L)μ-1,3-N3]n(ClO4)n的密度泛函计算及磁性研究

基于广义梯度近似密度泛函和全势能线性缀加平面波方法,本文对聚铜络合物[Cu(L)μ-1,3-N3]n(ClO4)n(其中L=tridentate Schiff base为三齿席夫基)的态密度和磁矩进行了计算.磁矩计算结果表明:①该聚铜络合物晶体格子的总磁矩为1.00 μB;②中心铜原子(离子)具有最大的原子磁矩,为0.531 μB;③铜原子和它周围最邻近的氮原子的原子磁矩是该聚铜络合物晶体格子总磁矩的主要来源.通过对中心铜原子及其最邻近氮原子的自旋态密度图进行分析,得出了铜原子和它周围最邻近氮原子的磁性主要分别来源于它们的d轨道和p轨道,同时还发现了中心铜离子的d轨道与叠氮末端氮原子的p轨道之间存在杂化现象, 以及中心铜离子向叠氮末端氮原子的自旋退局域化现象.自旋退局域化效应通过叠氮这一旁道使相邻两中心铜离子发生铁磁性相互作用.     

3d过渡金属Co掺杂核壳结构硅纳米线的第一性原理研究

基于密度泛函理论的第一性原理计算,研究了横截面为五边形和六边形的核壳结构硅纳米线的过渡金属Co原子替代掺杂.通过比较形成能发现,核心位置掺杂、壳层单链掺杂以及外壳层全替代掺杂的硅纳米线都具有稳定性,其中核心位置掺杂结构的稳定性最高.掺杂体系均呈现金属性,随着掺杂浓度的增加,电导通道数增加.Co原子掺杂的硅纳米线呈现铁磁性,具有磁矩.Bader电荷分析表明,电荷从Si原子转移至过渡金属Co原子.与自由态时过渡金属Co原子的磁矩相比,体系中Co原子的磁矩有所降低,这主要是由Co原子4s轨道向3d/4p轨道的电荷转移以及4s,3d,4p的上自旋电子转移至下自旋导致的.     

多壳层铜纳米线结构和电子特性的第一性原理研究

基于密度泛函理论框架下的第一性原理计算,系统地研究了多壳层Cu纳米线的稳定结构和电子特性.得到不同线径多壳层Cu纳米线的平衡态晶格常数相差不大,都表现出金属特性,且其单原子平均结合能和量子电导随着纳米线直径的增加而增加.纳米线中内壳层Cu原子表现出体相结构Cu原子相似的电子特性,而表面壳层由于配位数的减少,其3d态能量范围变窄且整体向费米能级发生移动.电荷密度分析表明,相对于体相Cu晶体中原子间的相互作用,纳米线表面壳层Cu原子与其最近邻原子间的相互作用明显增强.     

First principles study of the magnetism driven by cation defects in CeO₂:the important role of O2p states

The magnetism driven by cation defects in undoped CeO 2 bulk and thin films is studied by the density functional theory corrected for on-site Coulomb interactions (DFT+U) with U = 5 eV for the Ce4f states and U = 7 eV for the O2p states. It is found that the Ce vacancies can induce a magnetic moment of the ～ 4 μ B /supercell, which arises mainly from the 2p hole state of the nearest neighbouring O atom (～ 1 μ B on per oxygen) to the Ce vacancy. The effect of the methodology is investigated, indicating that U = 7 eV for the O2p state is necessary to obtain the localized O2p hole state in defective ceria with cation vacancies.     

金属纳米线弹性性能的尺寸效应及其内在机理的模拟研究

本文应用分子动力学(MD)方法和改进分析型嵌入原子模型(MAEAM)研究了Ni, Al和V纳米线的弹性性能尺寸效应及表面对其影响, 并计算了相应完整晶格材料的弹性性能. 结果表明本文计算完整晶格材料的弹性性能与已有实验和理论的结果相符合. 而计算所得各金属纳米线的体模量明显低于相应块体材料的结果, 且随纳米线的尺寸增加而呈指数增加, 并接近于常数. 在此基础上, 通过研究Ni, Al和V纳米线表面能的尺寸效应及其分布特征进一步探讨了自由表面在尺寸影响纳米线弹性性能过程中的作用及其内在机理.     

Electronic structures and magnetism of Fe nanowires on Cu（001） and Ag（O01）： A first-principles study

The electronic structures and magnetism of Fe nanowires along the [110] direction on Cu（001） and Ag（001） [Fe（nw）/Cu（001） and Fe（nw）/Ag（001）] are investigated by using the all-electron full-potential linearized augmented plane wave method in the generalized gradient approximation. It is found that the magnetic moment of Fe atom for the Fe（nw）/Cu（001） is 2.99#B, which is slightly smaller than that （3.02μB） for the Fe（nw）/Ag（001） but much larger than that （2.22μB） for the bcc iron. The great enhancement of magnetic moment in the Fe nanowires can be explained by the Fe d-band narrowing and enhancement of the spin-splitting due to a reduction in coordination number, From the calculated spin-polarized layer-projected density of states, it is found that the Fe 3d-states are strongly hybridized with the adjacent Cu 3d-states in the Fe（nw）/Cu（001）, and there exists a strong hybridization between the Fe sp-and the adjacent Ag 4d-states in the Fe（nw）/Ag（001）.     

碳纳米管内Ni纳米线的螺旋度与热稳定性研究

本文采用分子动力学模拟方法研究了扶手型碳纳米管包裹Ni纳米线的复合结构, 主要讨论内部Ni纳米线的螺旋度和热稳定性.结果表明, Ni纳米线为多壳层螺旋结构, 各壳层是由多条Ni原子链螺旋而成,不同层的螺旋度不同,内层的螺旋度明显大于外层. 当每层的Ni原子链条数为3的整数倍时,其螺旋度最大. Ni纳米线的螺旋度与碳纳米管的管径相关,各层螺旋度的大小随管径的增加有明显的周期性变化. 碳纳米管对Ni纳米线有很好的保护作用,即使是高温对Ni纳米线的结构及螺旋度也影响很小.     

Ab initio calculation of the geometric,electronic and magnetic properties of neutral and anionic Au n Pd (n = 1–9) clusters

The ab initio method based on density functional theory at the B3PW91 level has been applied to study the geometric, electronic, and magnetic properties of neutral and anionic Au _n Pd (n?=?1–9) clusters. The results show that the most stable geometric structures adopt a three-dimensional structure for neutral Au₇Pd and Au₈Pd clusters, but for anionic clusters, no three-dimensional lowest-energy structures were obtained. The relative stabilities of neutral and anionic Au _n Pd clusters were analysed by means of the dependent relationships between the binding energies per atom, the dissociation energies, the second-order difference of energies, the HOMO–LUMO energy gaps and the cluster size n, and a local odd–even alternation phenomenon was found. Natural population analysis indicates the sequential transfer from the Pd atom to the Au _n frame in Au_1,2,3,5Pd and Au_2,3Pd^? clusters, and from the Au _n frame to the Pd atom in other clusters. Much to our surprise, irrespective of whether it is the total magnetic moment or the local magnetic moment, the magnetic moment presents an odd–even alternation phenomenon as a function of the cluster size n. The magnetic effects are mainly localized on the various atoms (Au or Pd) for different cluster size n.     

Synthesis and photoluminescence property of boron carbide nanowires

Large scale, high density boron carbide nanowires have been synthesized by using an improved carbothermal reduction method with B/B203/C powder precursors under an argon flow at 1100℃. The boron carbide nanowires are 5-10 μm in length and 80-100 nm in diameter. Transmission electron microscopy （TEM） and selected area electron diffraction （SAED） characterizations show that the boron carbide nanowire has a B4C rhombohedral structure with good crystallization. The Raman spectrum of the as-grown boron carbide nanowires is consistent with that of a B4C structure consisting of B11C icosahedra and C-B-C chains. The room temperature photoluminescence spectrum of the boron carbide nanowires exhibits a visible range of emission centred at 638 nm.