Role of surface heterogeneity and molecular interactions in the charge-transfer process through self-assembled thiolate monolayers on Au(111)

A comparative study of charge-transfer processes from/to methyl-terminated and carboxylate-terminated thiolate-covered Au(111) surfaces to/from immobilized methylene blue (MB) molecules is presented. Scanning tunneling microscopy images with molecular resolution reveal the presence of molecular-sized defects, missing rows, and crystalline domains with different tilts that turn the thickness of the alkanethiolate SAM (the spacer) uncertain. The degree of surface heterogeneity at the SAMs increases as the number of C units (n) in the hydrocarbon chain decreases from n = 6. Defective regions act as preferred paths for MB incorporation into the methyl-terminated SAMs, driven by hydrophobic forces. The presence of negative-charged terminal groups at the SAMs reduces the number of molecules that can be incorporated, immobilizing them at the outer plane of the monolayer. Only MB molecules incorporated into the SAMs close to the Au(111) surface (at a distance < 0.5 nm) are electrochemically active. MB molecules trapped in different defects explain the broad shape and humps observed in the voltammogram of the redox couple. The heterogeneous charge-transfer rate constants for MB immobilized into methyl-terminated thiolate SAMs are higher than those estimated for carboxylate- terminated SAMs, suggesting a different orientation of the immobilized molecule in the thiolate environment.     

Self-assembled monolayers of ferrocene-substituted biphenyl ethynyl thiols on gold

Homogeneous and mixed [with biphenylthiol (BPT)] self-assembled monolayers (SAMs) of ferrocene-substituted biphenyl ethynyl thiols (Fc) were prepared on Au(111) substrates and characterized by several complementary spectroscopic techniques. The mixed films were fabricated either by subsequent immersion of the substrates into the BPT and Fc solutions or by immersion of the substrate into a mixed solution of BPT and Fc. The first procedure resulted in the preparation of high-quality mixed SAMs, in which the Fc molecules were stochastically distributed in the BPT matrix and well-separated from each other. The portion of these molecules in such films could be precisely varied from ca. 7 to 42% by selection of the immersion time in the BPT solution. The films prepared from the mixed solution exhibited a phase separation between the Fc and BPT constituents. These films contained mostly the Fc molecules ( approximately 80-90%), showing, thus, a significant deviation from the relative content of the target molecules in the primary solution (a 1:1 ratio). This finding shows that the Fc molecules, when competing with BPT, preferably adsorb onto Au(111) substrate, suggesting a significant impact of the ferrocene groups onto the structure-building interactions responsible for molecular self-assembly.     

Protein adsorption on oligo(ethylene glycol)-terminated alkanethiolate self-assembled monolayers: The molecular basis for nonfouling behavior

A study of protein resistance of oligo(ethylene glycol) (OEG), HS(CH2)11(OCH2CH2)nOH (n = 2, 4, and 6), self-assembled monolayers (SAMs) on Au(111) surfaces is presented here. Hydroxyl-terminated OEG-SAMs are chosen to avoid the hydrophobic effect observed with methyl-terminated OEG-SAMs, particularly at high packing densities. The structure of the OEG-SAM surfaces is controlled by adjusting the assembly solvent. These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Protein adsorption on these surfaces was investigated by surface plasmon resonance (SPR). OEG-SAMs assembled from mixed ethanol and water solutions show higher packing density on gold than those from pure ethanol solution. For EG2OH- and EG4OH-SAMs, proteins (i.e., fibrinogen and lysozyme) adsorb more on the densely packed SAMs prepared from mixed ethanol and water solutions, while EG6OH-SAMs generally resist protein adsorption regardless of the assembly solvent used.     

Characterization of self-assembled monolayers of thiols on Au(111)

Self-assembled monolayers (SAMs) of n-butanethiol, n-dodecanethiol and their equimolar mixture on Au(111) were prepared and characterized by ellipsometry, contact angle measurement, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results revealed that these SAMs are oriented ultrathin films with the thickness of nanometer scale, and the SAMs were influenced by the molecular chain length, the lattice orientation and cleanliness of the substrates. The surface of the longer chain SAM is hydrophobic. The thicknesses of three SAMs of n-butanethiol, n-dodecanethiol and their mixture revealed by ellipsometry and XPS are about 0.59 - 0.67nm, 1.60- 1.69 nm and 1.23 - 1.32nm, respectively. AFM images further demonstrated that the SAM formed by the mixture has some microdomains with two different thicknesses.     

A molecular approach to self-assembly of trimethylsilylacetylene derivatives on gold

We recently discovered that a linear multifunctional trimethylsilylacetylene (TMSA) compound forms long-range and highly stable self-assembled monolayers (SAMs) on reconstructed Au(111). To better understand the interactions governing self-assembly in this new system, we synthesized a series of homologue organosilanes and performed scanning tunneling microscopy (STM) measurements at the Au(111)/n-tetradecane interface. The four TMSA-terminated linear silanes that we synthesized self-assemble in similar ways on gold, with the molecules standing upright on the surface. In contrast, compounds with a slightly modified terminal group but the same polyunsaturated linear chain above the TMSA head do not self-assemble. In particular, substituting a methyl group of TMSA with a more bulky one prevents self-assembly. Removing the C triple bond C triple bond of TMSA or substituting the Si atom by a C atom also hinders self-assembly. Finally, substituting one methyl group of TMSA by a hydrogen atom induces self-assembly but in a different geometry, with the molecules lying flat on the gold surface in a quasi-epitaxy mode. Our molecular approach demonstrates the key role played by the TMSA head in self-assembly, its origin being twofold: 1) the TMSA layers are commensurate to the Au(111) adlattice along the <112> direction, and 2) the C triple bond C triple bond of TMSA activates the Si atom and induces the creation of a surface Si-Au chemical bond. The highly stable TMSA-based SAMs appear then as promising materials for applications in surface modification.     

Effect of ring substitution position on the structural conformation of mercaptobenzoic acid self-assembled monolayers on Au(111)

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, photoemission spectroscopy (PES), and contact angle measurements have been used to examine the structure and bonding of self-assembled monolayers (SAMs) prepared on Au(111) from the positional isomers of mercaptobenzoic acid (MBA). The isomer of MBA and solvent chosen in SAM preparation has considerable bearing upon film morphology. Carbon K-edge NEXAFS measurements indicate that the monomers of 2-, 3-, and 4-MBA have well-defined orientations within their respective SAMs. Monomers of 3- and 4-MBA assume an upright orientation on the Au substrates in monolayers prepared using an acetic acid in ethanol solvent. The aryl ring and carboxyl group of these molecules are tilted from the surface normal by a colatitudal angle of approximately 30 degrees . Preparation of 4-MBA SAMs using pure ethanol solvent, a more traditional means of synthesis, had no appreciable effect upon the monomer orientation. Nonetheless, S(2p) PES measurements illustrate that it results in extensive bilayer formation via carboxyl group hydrogen-bonding between 4-MBA monomers. In 2-MBA monolayers prepared using acetic acid/ethanol solvent, the monomers adopt a more prostrate orientation on the Au substrates, in which the aryl ring and carboxyl group of the molecules are tilted approximately 50 degrees from the surface normal. This configuration is consistent with an interaction between both the mercaptan sulfur and carboxyl group of 2-MBA with the underlying substrate. S(2p) and C(1s) PES experiments provide supporting evidence for a bidentate interaction between 2-MBA and Au(111).     

Chemical force titrations of functionalized Si(111) surfaces

Chemical force titrations-plots of the adhesive force between an atomic force microscope tip and sample as a function of pH-were acquired on alkyl monolayer-derivatized Si(111) surfaces. Gold-coated AFM tips modified with thioalkanoic acid self-assembled monolayers (SAM) were employed. Alkyl monolayer-derivatized Si(111) surfaces terminated with methyl, carboxyl, and amine groups were produced via hydrosilylation reactions between 1-alkene reagents and H-terminated silicon. The functionalized surfaces were characterized using standard surface science techniques (AFM, FTIR, and XPS). Titration of the methyl-terminated surface using the modified (carboxyl-terminated) atomic force microscope tip resulted in a small pH-independent hydrophobic interaction. Titration of the amine-terminated surface using the same tip resulted in the determination of a surface pKa of 5.8 for the amine from the pH value from the maximum in the force titration curve. A pK(1/2) of 4.3 was determined for the carboxyl-terminated Si(111) in a similar way. These results will be discussed in relation to the modified Si(111) surface chemistry and organic layer structure, as well as with respect to existing results on Au surfaces modified with SAMs bearing the same functional groups.     

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.     

Scanning tunneling microscopy of self-assembled phenylene ethynylene oligomers on Au(111) substrates

In this paper, we report the self-assembly, electrical characterization, and surface modification of dithiolated phenylene-ethynylene oligomer monolayers on a Au(111) surface. The self-assembly was accomplished by thiol bonding the molecules from solution to a Au(111) surface. We have confirmed the formation of self-assembled monolayers by scanning tunneling microscopy (STM) and optical ellipsometry, and have studied the kinetics of film growth. We suggest that self-assembled phenylene ethynylene oligomers on Au(111) surfaces grow as thiols rather than as thiolates. Using low-temperature STM, we collected local current-voltage spectra showing negative differential resistance at 6 K.     

Molecular tilting and its impact on frictional properties of n-alkane self-assembled monolayers

Hydrophobic, methyl-terminated self-assembled monolayer (SAM) surfaces can be used to reduce friction. Among methyl-terminated SAMs, the frictional properties of alkanethiol SAMs and silane SAMs have been well-studied. In this research, we investigated friction of methyl-terminated n-hexatriacontane (C36) SAM and compared its friction properties with the alkanethiol and silane SAMs. Alkane SAM does not have an anchoring group. The alkane molecules stand on the surface by physical adsorption, which leads to a higher surface mobility of alkane molecules. We found that C36 SAM has a higher coefficient of friction than that of octadecyltrichlorosilane (OTS) silane. When an atomic force microscope (AFM) tip was swiped across the alkane SAM with a loading force, we found that the alkane SAM can withstand the tip loading pressure up to 0.48 GPa. Between 0.48 and 0.49Ga, the AFM tip partially penetrated the SAM. When the tip moved away, the deformed SAM healed and maintained the structural integrity. When the loading pressure was higher than 0.49 GPa, the alkane SAM was shaved into small pieces by the tip. In addition, we found that the molecular tilting of C36 molecules interacted with the tribological properties of the alkane SAM surface. On one hand, a higher loading force can push the rod-like alkane molecules to a higher tilting angle; on the other hand, a higher molecular tilting leads to a lower friction surface.     

Formation and structure of self-assembled monolayers of alkanethiolates on palladium

The adsorption of n-alkanethiols onto polycrystalline thin films of palladium containing a strong (111) texture produces well-organized, self-assembled monolayers. The organization of the alkane chains in the monolayer and the nature of the bonding between the palladium and the thiol were studied by contact angle measurements, optical ellipsometry, reflection absorption infrared spectroscopy (RAIRS), and X-ray photoelectron spectroscopy (XPS). The XPS data reveals that a compound palladium-sulfide interphase is present at the surface of the palladium film. The RAIR spectra, ellipsometry data, and wetting properties show that the palladium-sulfide phase is terminated with an organized, methyl-terminated monolayer of alkanethiolates. The local molecular environment of the alkane chains transitions from a conformationally disordered, liquidlike state to a mostly all-trans, crystalline-like structure with increasing chain length (n = 8-26). The intensities and dichroism of the methylene and methyl stretching modes support a model for the average orientation of an ensemble of all-trans-conformer chains with a tilt angle of approximately 14-18 degrees with respect to the surface normal and a twist angle of the CCC plane relative to the tilt plane of approximately 45 degrees. The SAMs are stable in air, although the sulfur present at the surface oxidizes in air over a period of 2-5 days at room temperature. The differences in chain organization between SAMs formed by microcontact printing and by solution deposition are also examined by RAIRS and XPS.     

In situ STM evidence for the adsorption geometry of three N-heteroaromatic thiols on Au(111)

The electrochemical behavior of three heteroaromatic thiols (MBs) (2-mercaptobenzimidazole (MBI), 2-mercaptobenzothiazole (MBT), and 2-mercaptobenzoxazole (MBO)) on a Au(111) surface has been investigated by electrochemical scanning tunneling microscopy (ECSTM) and cyclic voltammetry (CV) in 0.1 M HClO(4) solution. All three thiols form oriented molecular cluster lines along the reconstruction line direction at 0.55 V. With the electrode potential shifting negatively, the molecules undergo a disordered-ordered structural transition. Molecularly resolved STM images show that all three molecules form striped adlayers in the desorption region on the Au(111) surface. The different heteroatoms in the heteroaromatic rings result in different electrochemical behavior of the MB self-assembled monolayers (SAMs). MBI, MBT, and MBO are proposed to interact with the substrate via the S-Au bonds from thiol group and the coordination interaction of N, S, and O with the substrate from the heteroaromatic ring, respectively. These results provide direct evidence of the electrochemical behavior and the adlayer structures of MB SAMs on the Au electrode.     

Self-assembled monolayers on Pt(111): molecular packing structure and strain effects observed by scanning tunneling microscopy

Self-assembled monolayers (SAMs) of octanethiol and benzeneethanethiol were deposited on clean Pt(111) surfaces in ultrahigh vacuum (UHV). Highly resolved images of these SAMs produced by an in situ scanning tunneling microscope (STM) showed that both systems organize into a super-structure mosaic of domains of locally ordered, closely packed molecules. Analysis of the STM images indicated a (square root 3 x square root 3)R30 degrees unit cell for the octanethiol SAMs and a 4(square root 3 x square root 3)R30 degrees periodicity based on 2 x 2 basic molecular packing for the benzeneethanethiol SAMs under the coverage conditions investigated. SAMs on Pt(111) exhibited differences in molecular packing and a lower density of disordered regions than SAMs on Au(111). Electron transport measurements were performed using scanning tunneling spectroscopy. Benzeneethanethiol/Pt(111) junctions exhibited a higher conductance than octanethiol/Pt(111) junctions.     

Tripodal Binding Units for Self-Assembled Monolayers on Gold: A Comparison of Thiol and Thioether Headgroups

Whereas thiols and thioethers are frequently used as binding units of oligodentate precursor molecules to fabricate self-assembled monolayers (SAMs) on coinage metal and semiconductor surfaces, their use for tridentate bonding configuration is still questionable. Against this background, novel tridentate thiol ligands, PhSi(CH(2)SH)(3) (PTT) and p-Ph-C(6)H(4)Si(CH(2)SH)(3) (BPTT), were synthesized and used as tripodal adsorbate molecules for the fabrication of SAMs on Au(111). These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The PTT and BPTT films were compared with the analogous systems comprised of same tripodal ligands with thioether instead of thiol binding units (anchors). XPS and NEXAFS data suggest that the binding uniformity, packing density, and molecular alignment of the thiol-based ligands in the respective SAMs is superior to their thioether counterparts. In addition, the thiol-based films showed significantly lower levels of contamination. Significantly, the quality of the PTT SAMs on Au(111) was found to be even higher than that of the films formed from the respective monodentate counterpart, benzenethiol. The results obtained allow for making some general conclusions on the specific character of molecular self-assembly in the case of tridentate ligands.     

Mixed self-assembled monolayers of semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)

Single-component and mixed self-assembled monolayers (SAMs) of one- and three-ring semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)-that is, thiopyran (1), 4-(4-cyclohexylidene-cyclohexylidene)tetrahydro-4H-thiopyran (2), and 4-(tetrahydro-4H-thiopyran-4-cyclohexylidene-4'-ylidene)tetrahydro-4H-thiopyran (3)--on Au(111) substrates have been prepared and studied by cyclic voltammetry (CV), atomic force microscopy (AFM), and scanning tunneling microscopy (STM). It was found that the shortest adsorbate 1 more readily forms a SAM than 2 or 3. Notwithstanding, the SAMs of 2 or 3 are thermodynamically more stable due to favorable intermolecular attractions. Holes were made with the AFM tip establishing tilt angles of 30-50 degrees with respect to the surface normal for all SAMs. STM imaging showed well-ordered, line-shaped packing patterns with molecular resolution for the SAM of 2. Similar patterned structures were not observed for 1 and 3. Mixed SAMs were prepared by exposing a SAM of 1 to ethanol solutions of either 2 or 3. STM imaging revealed that domains of molecules of 2 or 3 amidst a monolayer of 1 are formed in both cases. Whereas in the mixed SAM of 1 and 2 the domains are irregularly shaped, circular islands of uniform size are found in the mixed SAM of 1 and 3.     

Cytochrome c self-assembly on alkanethiol monolayer electrodes as characterized by AFM, IR, QCM, and direct electrochemistry

With the advantage of carbodiimide coupling chemistry, horse heart cytochrome c (cyt c) has been covalently immobilized onto self-assembled monolayers (SAMs) from 11-mercaptoundecanoic acid (MUDA) developed on single-crystal or polycrystalline gold substrate surfaces. The cyt c immobilized substrates thus prepared have been characterized by atomic force microscopy (AFM); we have succeeded in obtaining surface topographical images down to single-protein resolution. AFM imaging has also shown densely packed, uniform protein monolayer formation that is highly suggestive of self-assembly of cyt c molecules on MUDA SAMs. Covalent attachment of cyt c has been further evidenced by reflection-absorption FT-IR as well as microgravimetric analysis using a quartz crystal microbalance (QCM). In the latter, the specific MUDA and cyt c surface concentrations were determined to be 0.86 +/- 0.11 nmol cm-2 (n = 5) and 28 +/- 12 pmol cm-2 (n = 5), both of which agree fairly well with their theoretical counterparts. The obtained QCM chips having the cyt c/MUDA/Au interfacial structure were found to be capable of the direct electrochemistry of the surface-attached cyt c molecules. Cyclic voltammetric measurements on the chips gave particular redox waves showing characteristics of surface process. The electroactive protein surface concentration was determined to be 7.2 +/- 4.8 pmol cm-2 (n = 6); it was almost consistent with values found in literature, while it was limited to 26% in magnitude for the QCM data. This was deemed to have arisen from the orientation variation of the surface-confined cyt c molecules and is discussed briefly.     

Molecular self-assembly at bare semiconductor surfaces: preparation and characterization of highly organized octadecanethiolate monolayers on GaAs(001)

Through rigorous control of preparation conditions, organized monolayers with a highly reproducible structure can be formed by solution self-assembly of octadecanethiol on GaAs (001) at ambient temperature. A combination of characterization probes reveal a structure with conformationally ordered alkyl chains tilted on average at 14 +/- 1 degrees from the surface normal with a 43 +/- 5 degrees twist, a highly oleophobic and hydrophobic ambient surface, and direct S-GaAs attachment. Analysis of the tilt angle and film thickness data shows a significant mismatch of the average adsorbate molecule spacings with the spacings of an intrinsic GaAs(001) surface lattice. The monolayers are stable up to approximately 100 degrees C and exhibit an overall thermal stability which is lower than that of the same monolayers on Au[111] surfaces. A two-step solution assembly process is observed: rapid adsorption of molecules over the first several hours to form disordered structures with molecules lying close to the substrate surface, followed by a slow densification and asymptotic approach to final ordering. This process, while similar to the assembly of alkanethiols on Au[111], is nearly 2 orders of magnitude slower. Finally, despite differences in assembly rates and the thermal stability, exchange experiments with isotopically tagged molecules show that the octadecanethiol on GaAs(001) monolayers undergo exchange with solute thiol molecules at roughly the same rate as the corresponding exchanges of the same monolayers on Au[111].     

Hierarchical chiral framework based on a rigid adamantane tripod on Au(111)

We have investigated the tripod-shaped bromo adamantane trithiol (BATT) molecule on Au(111) using scanning tunneling microscopy (STM) at 4.7 K. Adsorption of BATT leads to formation of highly ordered self-assembled monolayers (SAMs) with three-point contacts on Au(111). The structure of these SAMs has been found to have a two-tiered hierarchical chiral organization. The self-assembly of achiral monomers produces chiral trimers, which then act as the building blocks for chiral hexagonal supermolecules. SAMs begin to form from the racemic mixture of assembled molecules in ribbon-shaped islands, followed by the transformation to enantiomeric domains when SAM layers develop two-dimensionally across hcp domains. Such a chiral phase transition at the two-dimensional domain can arise from a subtle balance between molecule-substrate and intermolecular interactions. Two structural factors, the S atom (stabilization) and the methylene groups (chirality) located just above the S atom, induce the chiral ordering of BATT on Au(111).     

Surface‐Confined Electropolymerization of Methylene Blue on Gold Electrodes

We report on the electrochemical behaviour and electropolymerization of self‐assembled monolayers (SAMs) of methylene blue (MB) on gold electrodes. The SAMs of MB on gold electrodes were prepared by immersing the substrates into a solution of 1.0 mM MB in absolute ethanol for different times at room temperature. Cyclic voltammetry experiments exhibited that reductive desorption of MB monolayer takes place at three different potentials on polycrystalline gold electrodes, while reductive desorption of MB monolayer consists of only one peak on single crystal Au(111) substrates. Calculated charge densities for different immersion times indicated that optimal immersion time for self‐assembly of MB is 96 h. Electropolymerization of SAMs of MB on gold electrode was achieved by applying 0.95 V for 1 s in 0.1 M borate buffer solution (pH: 9.0). It was observed that poly(MB) monolayers are highly stable in acidic media. ATR‐FTIR and UV‐vis spectra exhibited differences between monomer and polymer monolayers, which are attributed to surface‐confined electropolymerization. STM image of poly(MB) monolayer on Au(111) substrate revealed a surface that is covered by well‐ordered, collateral nanowires with an average size of 3 nm.