Transportation and Settling Distribution of Microparticles in Low-Reynolds-Number Poiseuille Flow in Microchannel

In this article, velocity field and settling distribution of microparticles in a dilute suspension in low-Reynolds-number Poiseuille flow in a microchannel is experimentally investigated using microscopic image analysis. An effective technique is applied to manipulate single-particle tracking in order to determine the controlling parameters on transportation and settling of microparticles in microchannels. The results show that the velocities of dispersed phase are affected by the hydrodynamic properties, and this velocity deviation can be significant when the hydrodynamic coupling between particles and channel walls is considerable. Increasing the Reynolds number would result in decrease in total number of particles settled on the bottom wall of channel.     

Aligned cellulose nanocrystals and directed nanoscale deposition of colloidal spheres

Cellulose nanocrystals are aligned in wrinkled polydimethylsiloxane templates and transferred to polyethyleneimine-coated silica surfaces in a printing process similar to microcontact printing. The highly aligned nanorods were deposited onto the surfaces with a line-to-line distance of 225–600 nm without loss of alignment. It was also possible to repeat the transfer process on the same surface at a 90-degree angle to create a network structure. This demonstrates the versatility of the technique and creates more options for advanced multilayering of materials. To demonstrate that the surface properties of the anionic cellulose nanorods were unaffected by the transfer process and to prove the concept of functionalizing transferred particles, cationic latex particles were electrostatically self-assembled onto the cellulose nanorods. The directed deposition of these particles resulted in excellent site specificity and the highest resolution to date for controlled deposition of colloids on an electrostatically patterned surface.     

Hydrodynamic crossover in dynamic microparticle adhesion on surfaces of controlled nanoscale heterogeneity

This note documents the crossover from a regime where shear flow hinders microparticle adhesion on collecting surfaces to that where increased flow aids particle capture. Flow generally works against adhesion and successfully hinders particle capture when the net physicochemical attractions between the particles and collector are weak compared with hydrodynamic forces on the particle. Conversely, with strong attractions between particles and collector, flow aids particle capture by increasing the mass transport of particles to the interfacial region. Here, local hydrodynamics still generally oppose adhesion but are insufficient to pull particles off of the surface. Thus, flow actually increases the particle capture rate through the increased transport to the surface. These behaviors are demonstrated using 1 mum silica spheres flowing over electrostatically heterogeneous (length scales near 10 nm) collecting surfaces at shear rates from 22 to 795 s(-1). The net surface charge on the collector is varied systematically from strongly negative (pure silica) to strongly positive (a saturated polycationic overlayer), demonstrating the interplay between physicochemical and hydrodynamic contributions. These results clearly apply to situations where heterogeneous particle-surface interactions are electrostatic in nature; however, qualitatively similar behavior was previously reported for the effect receptor density on bacterial adhesion.     

Resolving the coupled effects of hydrodynamics and DLVO forces on colloid attachment in porous media

Transport of colloidal particles in porous media is governed by the rate at which the colloids strike and stick to collector surfaces. Classic filtration theory has considered the influence of system hydrodynamics on determining the rate at which colloids strike collector surfaces, but has neglected the influence of hydrodynamic forces in the calculation of the collision efficiency. Computational simulations based on the sphere-in-cell model were conducted that considered the influence of hydrodynamic and Derjaguin-Landau-Verwey-Overbeek (DLVO) forces on colloid attachment to collectors of various shape and size. Our analysis indicated that hydrodynamic and DLVO forces and collector shape and size significantly influenced the colloid collision efficiency. Colloid attachment was only possible on regions of the collector where the torque from hydrodynamic shear acting on colloids adjacent to collector surfaces was less than the adhesive (DLVO) torque that resists detachment. The fraction of the collector surface area on which attachment was possible increased with solution ionic strength, collector size, and decreasing flow velocity. Simulations demonstrated that quantitative evaluation of colloid transport through porous media will require nontraditional approaches that account for hydrodynamic and DLVO forces as well as collector shape and size.     

Boëder PDF Brownian simulations for macromolecular rod-like particles near uneven solid surfaces

A molecular dynamics simulation is presented to calculate the Probability Distribution Functions (PDF) for the spatial positions and angular orientations of macromolecular rod-like particles in dilute solutions, under hydrodynamic flow, in the vicinity of uneven solid boundaries. The Brownian and hydrodynamic restitution model for ideally flat surfaces is generalized to simulate the diffusive collisions between the macromolecular particles and an uneven solid surface. Two types of uneven surfaces are particularly considered: the periodic grating and the random rough, with characteristic profiles of heights and lateral variations. Different from ideally flat surfaces, the simulation results demonstrate that uneven surfaces have characteristic depletion layers, and characteristic and variable PDF. This is the case under varying conditions of hydrodynamic flow, Brownian movement and diffusive collisions. These characteristics uniquely identify Boeder PDF signatures for the uneven surface topography.     

Colloidal interactions and fouling of NF and RO membranes: a review

Colloids are fine particles whose characteristic size falls within the rough size range of 1-1000 nm. In pressure-driven membrane systems, these fine particles have a strong tendency to foul the membranes, causing a significant loss in water permeability and often a deteriorated product water quality. There have been a large number of systematic studies on colloidal fouling of reverse osmosis (RO) and nanofiltration (NF) membranes in the last three decades, and the understanding of colloidal fouling has been significantly advanced. The current paper reviews the mechanisms and factors controlling colloidal fouling of both RO and NF membranes. Major colloidal foulants (including both rigid inorganic colloids and organic macromolecules) and their properties are summarized. The deposition of such colloidal particles on an RO or NF membrane forms a cake layer, which can adversely affect the membrane flux due to 1) the cake layer hydraulic resistance and/or 2) the cake-enhanced osmotic pressure. The effects of feedwater compositions, membrane properties, and hydrodynamic conditions are discussed in detail for inorganic colloids, natural organic matter, polysaccharides, and proteins. In general, these effects can be readily explained by considering the mass transfer near the membrane surface and the colloid-membrane (or colloid-colloid) interaction. The critical flux and limiting flux concepts, originally developed for colloidal fouling of porous membranes, are also applicable to RO and NF membranes. For small colloids (diameter?100 nm), the limiting flux can result from two different mechanisms: 1) the diffusion-solubility (gel formation) controlled mechanism and 2) the surface interaction controlled mechanism. The former mechanism probably dominates for concentrated solutions, while the latter mechanism may be more important for dilute solutions. Future research needs on RO and NF colloidal fouling are also identified in the current paper.     

Characterization of heavy-metal-containing seepage water colloids by flow FFF, ultrafiltration, ELISA and AAS

Heavy-metal-containing humic colloids from seepage water samples of three different municipal waste disposal plants were characterized in terms of molecular weight, hydrodynamic radius and heavy metal content. The size distribution of the colloids was determined with ultrafiltration (UF) and flow field-flow fractionation (flow FFF). The humic colloids in the seepage water samples were characterized using an off-line coupling of flow FFF with an enzyme-linked immunosorbent assay (ELISA) for humic substances. The heavy metals in the different size fractions obtained by UF and flow FFF were determined using atomic absorption spectroscopy (AAS). The colloid size distributions obtained with UF showed a maximum of the distribution in the range 1–10 nm. Seepage water samples with high colloid concentrations had a second maximum in the range 0.1–1 m. The determination of colloid size with flow FFF gave different colloid size distributions for the three waste disposal seepage waters, whereas water from the oldest disposal plant showed the smallest colloid size with a maximum at 0.9 nm and water from the most recent plant showed the largest colloid size with a maximum at 1.3 nm. The determination of particle classes with regard to the chemical composition using a scanning electron microscope with energy dispersive X-ray fluorescence detector (SEM/EDX) showed that the particles can be divided into five classes: silicates, insoluble salts, iron(hydr)oxides, carbonates and organic colloids (humic colloids). Flow FFF/ELISA off-line coupling showed that the most frequently occurring colloids of the seepage waters were humic colloids and investigation of the UF-size-fractions with AAS showed that up to 77% of the total mass of a heavy metal element can be bound to particles, especially to humic colloids. Additionally, the distributions of the heavy metals Fe, Cu and Zn were investigated with flow FFF/AAS off-line coupling. These results also showed that a substantial amount of these heavy metals (up to 46%) was bound to humic colloids.     

Size fractionation and characterization of natural colloids by flow-field flow fractionation coupled to multi-angle laser light scattering

Flow-field flow fractionation (FlFFF) coupled to multi-angle laser light scattering (MALLS) was evaluated for size and shape determination of standard spherical and arbitrarily shaped natural colloids. Different fitting methods for light scattering data retrieved from MALLS were evaluated to determine the particle size of spherical standards and natural colloids. In addition, FlFFF was optimized for best fractionation in connection to MALLS, minimal colloids-membrane interaction, and minimal sample losses. FlFFF, calibrated with standard particles, was used to determine hydrodynamic diameter, or radius (D(h) or R(h)), of the fractionated colloids, whereas the MALLS was used to determine root mean square radius of gyration (R(g)) for fractionated colloids. Combining both results, by calculating the R(g)/R(h) ratio, allows an estimation of colloid deviation from the shape of homogeneous sphere. Accordingly, this study demonstrates that, FlFFF-MALLS is a valuable technique for characterizing heterogeneous and arbitrarily shaped natural colloidal particles in terms of size and shape. To check the usefulness of FlFFF-MALLS in natural colloid studies, the technique was used to investigate the sedimentation behavior of extracted soil colloidal particles. Results illustrate that, in a silty till sample, carbonates function as cement between the colloidal particles, and consequently, change their sedimentation behavior. On the other hand, carbonate dissolution generates a more homogeneous colloidal sample.     

Interaction of micrometer-scale particles with nanotextured surfaces in shear flow

Dynamic particle adhesion from flow over collecting surfaces with nanoscale heterogeneity occurs in important natural systems and current technologies. Accurate modeling and prediction of the dynamics of particles interacting with such surfaces will facilitate their use in applications for sensing, separating, and sorting colloidal-scale objects. In this paper, the interaction of micrometer-scale particles with electrostatically heterogeneous surfaces is analyzed. The deposited polymeric patches that provide the charge heterogeneity in experiments are modeled as 11-nm disks randomly distributed on a planar surface. A novel technique based on surface discretization is introduced to facilitate computation of the colloidal interactions between a particle and the heterogeneous surface based on expressions for parallel plates. Combining these interactions with hydrodynamic forces and torques on a particle in a low Reynolds number shear flow allows particle dynamics to be computed for varying net surface coverage. Spatial fluctuations in the local surface density of the deposited patches are shown responsible for the dynamic adhesion phenomena observed experimentally, including particle capture on a net-repulsive surface.     

Colloidal transport of uranium in soil: Size fractionation and characterization by field-flow fractionation–multi-detection

The aim of this study was to characterize colloids associated with uranium by using an on-line fractionation/multi-detection technique based on asymmetrical flow field-flow fractionation (As-Fl-FFF) hyphenated with UV detector, multi angle laser light scattering (MALLS) and inductively coupling plasma-mass spectrometry (ICP-MS). Moreover, thanks to the As-Fl-FFF, the different colloidal fractions were collected and characterized by a total organic carbon analyzer (TOC). Thus it is possible to determine the nature (organic or inorganic colloids), molar mass, size (gyration and hydrodynamic radii) and quantitative uranium distribution over the whole colloidal phase. In the case of the site studied, two populations are highlighted. The first population corresponds to humic-like substances with a molar mass of (1500 ± 300) g mol⁻¹ and a hydrodynamic diameter of (2.0 ± 0.2) nm. The second one has been identified as a mix of carbonated nanoparticles or clays with organic particles (aggregates and/or coating of the inorganic particles) with a size range hydrodynamic diameter between 30 and 450 nm. Each population is implied in the colloidal transport of uranium: maximum 1% of the uranium content in soil leachate is transported by the colloids in the site studied, according to the depth in the soil. Indeed, humic substances are the main responsible of this transport in sub-surface conditions whereas nanoparticles drive the phenomenon in depth conditions.     

Template-assisted self-assembly: a practical route to complex aggregates of monodispersed colloids with well-defined sizes, shapes, and structures

This paper describes a strategy that combines physical templating and capillary forces to assemble monodispersed spherical colloids into uniform aggregates with well-controlled sizes, shapes, and structures. When an aqueous dispersion of colloidal particles was allowed to dewet from a solid surface that had been patterned with appropriate relief structures, the particles were trapped by the recessed regions and assembled into aggregates whose structures were determined by the geometric confinement provided by the templates. We have demonstrated the capability and feasibility of this approach by assembling polystyrene beads and silica colloids (> or =150 nm in diameter) into complex aggregates that include polygonal or polyhedral clusters, linear or zigzag chains, and circular rings. We have also been able to generate hybrid aggregates in the shape of HF or H2O molecules that are composed of polymer beads having different diameters, polymer beads labeled with different organic dyes, and a combination of polymeric and inorganic beads. These colloidal aggregates can serve as a useful model system to investigate the hydrodynamic and optical scattering properties of colloidal particles having nonspherical morphologies. They should also find use as the building blocks to generate hierarchically self-assembled systems that may exhibit interesting properties highly valuable to areas ranging from photonics to condensed matter physics.     

Sedimentation of aggregating colloids

We investigate the combined effects of gravity, attractive interactions, and brownian motion in suspensions of colloidal particles and nonadsorbing polymer. Depending on the effective strength of gravitational forces, resulting from a density mismatch between the colloids and the solvent, and the magnitude and range of the depletion interactions induced by the polymer, sedimentation in these suspensions can result in an equilibrium structure or a kinetically arrested state. We employ large-scale molecular dynamics simulations to systematically classify the different regimes that arise as a function of attraction strength and gravitational stress. Whereas strong attractions lead to cluster aggregation and low-density arrested states, moderate attractions can enhance crystallization of the colloidal particles in the sediment. We make direct comparisons to experimental results to infer general conclusions about the mechanisms leading to mechanically stable sediments.     

Hydrodynamics of a porous sphere molecule

A mathematical model is proposed which treats a hypothetical polymer molecule as a porous sphere. Fluid flow within the sphere obeys Darcy's law while the creeping motion equations are used outside the sphere. Equations are derived relating the permeability and radius of the sphere to hydrodynamic properties of dilute solutions of the polymer. In checking against experimental data, it is found that the model, despite its simplicity, may be useful in explaining the hydrodynamic behavior of molecules which are highly branched or crosslinked.     

Thermal-diffusive behavior of a dilute solution of charged colloids

Thermal diffusion of a dilute solution of charged silica colloidal particles (Ludox) is studied by a holographic grating technique. The Soret coefficient of the charged colloids is measured as a function of the Debye screening length and the surface charge density of the colloids. The latter is varied by means of variation of the pH. The experimental Soret coefficients are compared with several theoretical predictions. The surface charge density is independently obtained from electrophoresis measurements, the size of the colloidal particles is obtained from electron microscopy, and the Debye length is calculated from ion concentrations. The only adjustable parameter in the comparison with theory is therefore the intercept at zero Debye length, which measures the contribution to the Soret coefficient of the solvation layer and possibly the colloid core material.     

Evanescent wave excited luminescence from levitated quantum dot modified colloids

Evanescent wave excited luminescence of quantum dot modified polystyrene (QDPS) colloids is investigated to measure potential energy profiles of QDPS colloids electrostatically levitated above a planar glass surface. Luminescence is characterized for three different-sized PS colloids modified with three different-sized QDs using confocal microscopy, emission spectra, flow cytometry, and temporal measurements of levitated and deposited colloids. Colloid-surface potential energy profiles constructed from scattering and luminescence intensity data display excellent agreement with each other, theoretical predictions, and independently measured parameters. QDPS luminescence intensity is indirectly confirmed to have an exponential dependence on height similar to conventional colloidal evanescent wave scattering. Our findings indicate that evanescent wave excited QDPS luminescence could enable total internal reflection microscopy measurements of index-matched hard spheres, multiple specific biomolecular interactions via spectral multiplexing, enhanced morphology-dependent resonance modes, and integrated evanescent wave-video-confocal microscopy experiments not possible with scattering.     

Dynamical and rheological properties of soft colloid suspensions

Soft colloids comprise a wide class of materials, ranging from linear polymers over polymeric assemblies, such as star polymers and dendrimers, to vesicles, capsules, and even cells. Suspensions of such colloids exhibit remarkable responses to imposed flow fields. This is related to their ability to undergo conformational changes and elastic deformations, and the adaptation of their dynamical behavior. The rational design of soft particles for targeted applications or the unraveling of their biological function requires an understanding of the relation between their microscopic properties and their macroscopic response. Here, mesoscale computer simulations provide an invaluable tool to tackle the broad range of length and time scales. In this article, we discuss recent theoretical and simulation results on the rheological behavior of ultrasoft polymeric colloids, vesicles, capsules, and cells. The properties of both, individual particles and semi-dilute suspensions, are addressed.     

pH诱导两性离子配体修饰的金溶胶的浓缩与保存

研究了两性离子配体修饰的金纳米颗粒在酸性和碱性溶液中的稳定性和可逆聚集性. 测量了金溶胶在不同条件下的UV-Vis 吸收光谱, 通过光谱的变化揭示其稳定性和可逆聚集性. 结果表明: 经配体修饰的金纳米颗粒在酸性和碱性溶液中的稳定性有了很大的提高; 强酸性条件可诱导金溶胶失稳聚沉, 回调pH值又可使其重新分散. 利用这种pH依赖的可逆聚集特性, 可以将稀溶胶浓缩成浓溶胶或固体保存, 一旦需要又可加水恢复到分散的状态.     

Synthesis,self‐assembly and adsorption of PEO–PLA block copolymers onto colloidal polystyrene

A series of amphiphilic block copolymers composed of poly(ethylene oxide) and poly(lactide) were synthesized and their solution properties studied using static and dynamic light scattering. These materials self‐assemble in aqueous media with the hydrodynamic radius increasing with increasing hydrophobic fraction in the copolymer. To ascertain the potential for use of these materials as degradable coatings in delivery applications, block copolymers of varying compositions were adsorbed onto a series of colloidal polystyrene particles with varying radii, and the thickness of the adsorbed layer was determined from changes in the hydrodynamic size. The adlayer thicknesses ranged from 3 to 14 nm with varying block copolymer compositions, and colloid radii. The trends fit well with theoretical models for adlayer thickness, with the exception of the smallest colloids. In these systems, we propose that the colloids may become encapsulated into the block copolymer assembly. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 244–252, 2008     

Cooperative magnetophoresis of superparamagnetic colloids: theoretical aspects

Superparamagnetic colloids have a great practical interest for their applications to processes ranging from biomedicine to environmental waste and pollutants removal. A fast and efficient separation of these particles from the solvent constitutes a key step in the practical implementation of this technology. Recent experiments show fast magnetophoretic separation using relatively small magnetic gradients and high magnetic fields. The mechanism underlying this fast separation was shown to be the reversible aggregation of the magnetic beads induced by the external field. In this paper, we analyze theoretically the physicochemical conditions under which reversible aggregation can be typically achieved, the timescale at which aggregates form, and their shape. In the case of colloids stabilized electrostatically, for reasonable surface potentials (approximately −70 mV), we find that the interaction potential between two superparamagnetic particles displays a barrier with a minimum so that reversible aggregates can form. We also show that the aggregation of particles is quite fast (typically less than a second for usual concentrations) and that lateral aggregation is more energetically stable than tip-to-tip aggregation for long chains (larger than 14 microspheres). This is consistent with experimental observations and very relevant for a fast magnetophoresis since thick aggregates move faster than thin ones.     

Colloids of pure proteins by hard templating

Colloidal particles from pure proteins are favorable over composite colloids (usually polymer-based) for applications in drug delivery and biocatalysis. This is due to degradation issue and protein unfolding. Hard templating based on porous CaCO₃ cores has been recently adopted for fabrication of pure protein colloids. In comparison to conventional techniques, the templating offers (i) a control over particles size and (ii) mild preparation conditions without any additives, shear forces, and exposure to high temperature or gas-water interface. In this review, the current achievements in CaCO₃-based templating of protein colloids are given. The focus is on physicochemical and material properties of the colloids such as stability, mechanical properties, and internal structure. These properties are considered as a function of pH, ionic strength, and protein denaturation degree. Understanding of these basic aspects gives an option to formulate the protein colloids by hard templating achieving desired particle properties that is crucially important for future applications.