Fluorescence and Nonlinear Optical Properties of Alizarin Red S in Solvents and Droplet

The enhancement of the nonlinear properties of materials is an interesting topic since it has many applications in optical devices and medicines. The Z-scan technique was used to study the values of the two-photon absorption (β), second-order molecular hyperpolarizability (γ_R), third-order susceptibility (χ_R), and nonlinear refractive index (n₂) of Alizarin Red S in different media using a continuous-wave diode-pump laser radiation at 532 nm. For Alizarin Red S in a droplet, the β, n₂, χ_R, and γ_R were estimated at the order of 10^?7 cm²/W and 10^?12 cm/W, 10^?3 m³ W^?1 s^?1 and 10^?24 m⁶ W^?1 s^?1, respectively. The results indicated that the values of β and n₂ reduced, whereas the values of χ_R and γ_R were enhanced when the solvent was changed from droplet to water, DMF, and dimethyl sulfoxide due to the change in the solvent’s dielectric constant (ε). Moreover, the values of β were enhanced by an increase in the concentration of the surfactant in the aqueous solution. The absorption spectra of Alizarin Red S in the aqueous solution was observed at 428 nm, and a few red shifts in the absorption spectra were observed with a reduction in the dielectric constant of the medium. The same effect was observed in the absorption spectra of Alizarin Red S in the droplet when the bulk dielectric constant reduced. The dielectric constant can affect the fluorescence spectra of Alizarin Red S when the solution is changed from water to dimethyl sulfoxide. The dipole moments of Alizarin Red S in the different media were studied using the quantum perturbation theory.     

Synthesis of thiol-functionalized MCM-41 mesoporous silicas and its application in Cu(II), Pb(II), Ag(I), and Cr(III) removal

Thiol-functionalized MCM-41 mesoporous silicas were synthesized via evaporation-induced self-assembly. The mesoporous silicas obtained were characterized by X-ray diffraction (XRD), nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The products were used as adsorbents to remove heavy metal ions from water. The mesoporous silicas (adsorbent A) with high pore diameter (centered at 5.27 nm) exhibited the largest adsorption capacity, with a BET surface area of 421.9 m² g^?1 and pore volume of 0.556 cm³ g^?1. Different anions influenced the adsorption of Cu(II) in the order NO₃ ^? < OAc^? < SO₄ ^2? < CO₃ ^2? < Cit^? < Cl^?. Analysis of adsorption isotherms showed that Cu²⁺, Pb²⁺, Ag⁺, and Cr³⁺ adsorption fit the Redlich–Peterson nonlinear model. The mesoporous silicas synthesized in the work can be used as adsorbents to remove heavy metal ions from water effectively. The removal rate was high, and the adsorbent could be regenerated by acid treatment without changing its properties.     

Photocatalytic reduction of chromium(VI) in aqueous solution using dye-sensitized nanoscale ZnO under visible light irradiation

Photocatalytic removal of Cr⁶⁺ from aqueous solution using dye-sensitized nanoscale ZnO under visible light irradiation was studied in this work. First, nanoscale ZnO was prepared by the co-precipitation method. Then, sensitization of nanoscale ZnO by Alizarin Red S dye followed. Further, nanoscale ZnO and dye-sensitized nanoscale ZnO (designated nanoZnO and nanoZnO*, respectively) were both characterized by various photospectrometry methods, such as scanning electron microscopy (SEM), scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS), EDS-mapping, transmission electron microscopy (TEM), and X-ray diffractometry (XRD). It was found that both types of prepared particles are spherical in shape with a size range of 20 to 50 nm. XRD patterns showed that both nanoZnO and nanoZnO* had the same crystalline structure of zincite. In the photocatalytic reduction aspect, effects of different light sources and dosage of nanoZnO* on Cr⁶⁺ reduction ([Cr⁶⁺]_initial = 20 mg/L) were evaluated in this work. Treatment of chromium(VI)-bearing wastewater under the conditions of using 1.0 g/L of nanoZnO*, neutral pH, irradiation of household fluorescence lamps for 6 h and 17 h would yield Cr⁶⁺ removal efficiencies of about 68% and 90%, respectively. When the household fluorescence lamps were replaced by visible-light lamps of 400–500 nm in wavelength, the corresponding removal efficiencies dropped to about 50% and 75%, respectively. When nanoZnO* was irradiated by sunlight under almost the same experimental conditions, the Cr⁶⁺ reduction efficiency increased up to 90%. In summary, sensitizing nanoscale ZnO with Alizarin Red S dye for photocatalytic applications using visible light is feasible. The relevant reaction mechanism and pathways were also proposed in this work.     

Highly hydrated poly(allylamine)/silica magnetic resin

The creation of multifunctional nanomaterials by combining organic and inorganic components is a growing trend in nanoscience. The unique size-dependent properties of magnetic nanoparticles (MNPs) make them amenable to numerous applications such as carriers of expensive biological catalysts, in magnetically assisted chemical separation of heavy metals and radionuclides from contaminated water sources. The separation of minor actinides from high-level radionuclide waste requires a sorbent stable in acidic pH, with ease of surface functionalization, and a high capacity for binding the molecules of interest. For the described experiments, the MNPs with 50 nm average size were used (size distribution from 20 to 100 nm and an iron content of 80–90 w/w%). The MNPs that have been double coated with an initial silica coating for protection against iron solubilization and oxidation in nitric acid solution (pH 1) and a second silica/polymer composite coating incorporating partially imbedded poly(allylamine) (PA). The final product is magnetic, highly swelling, containing >95% water, with >0.5 mmol amines g^?1 available for functionalization. The amine groups of the magnetic resin were functionalized with the chelating molecules diethylenetriaminepentaacetic acid (DTPA) and N,N-dimethyl-3-oxa-glutaramic acid (DMOGA) for separation of minor actinides from used nuclear fuel.     

Synthesis of Tapioca Cellulose-based Poly(amidoxime) Ligand for Removal of Heavy Metal Ions

Poly(acrylonitrile)/cellulose block copolymer (PAN-b-cell) was prepared by using a free radical initiating process and then the nitrile functional groups of the PAN blocks of the copolymers were transformed into amidoxime ligands. The resulting poly(amidoxime) ligands could complex with heavy metal ions; for example, the reflectance spectra of the [Cu -ligand]ⁿ⁺ was found to be at the highest absorbance, about 94%, at pH 6. The pH was the key parameter for metal ions sensing by the ligand. The adsorption capacity for copper was very good, 272 mg g^?1, with a fast adsorption rate (t_1/2 = 10 min). The adsorption capacities for other heavy metal ions such as Fe³⁺, Cr³⁺, Co³⁺ and Ni²⁺ were also good, being 242, 219, 201 and 195 mg g^?1, respectively, at pH 6. The heavy metal ions removal efficiency from water was 98% at low concentration. The data proved that the heavy metal ions adsorption onto the polymer ligands were well fitted with the Langmuir isotherm model (R²>0.99), which suggests that the cellulose-based adsorbent surface namely the poly(amidoxime) ligand, was homogenous and a monolayer. The reusability was examined by a sorption/desorption process for six cycles and the extraction efficiency was determined. This new adsorbent could be reused for 6 cycles without any significant loss in its original removal function.     

Synthesis of graphene oxide-poly(2-hydroxyethyl methacrylate) composite by dispersion polymerization in supercritical CO2: adsorption behavior for the removal of organic dye

The use of a biocompatible and thermoresponsive polymer, poly(2-hydroxyethyl methacrylate) (PHEMA) grafted onto the surface of graphene oxide (GO) as an adsorbent for the removal of a cationic dye (methylene blue [MB]) from an aqueous solution is examined in this work. GO–PHEMA forms a hydrogel in water thus overcoming the problem faced by carbon-based adsorbent materials during post-treatment (i.e., separation of adsorbent from the aqueous phase). The GO–PHEMA composite was synthesized using a green approach through dispersion polymerization in supercritical CO₂. The successful preparation of this composite was confirmed by a series of characterization techniques. The adsorption behavior of the composite toward MB such as the effect of the adsorbent dosage, pH, contact time, dye concentration, and recyclability were observed. In addition, the adsorption isotherm, kinetics and thermodynamics were investigated. According to the experimental data, the adsorption parameters were found to fit well into the Freundlich adsorption isotherm with a correlation coefficient of 0.975 and a maximum predicted adsorption capacity of 39.41 mg g^?1 at 25 °C. The adsorption kinetics studies showed that the adsorption behavior followed a pseudo-second-order reaction. On the other hand, the thermodynamics studies showed that the adsorption of MB on GO–PHEMA composite followed spontaneous and endothermic adsorption process with an efficient adsorption temperature at 45 °C. The experimental results also showed that the GO–PHEMA composite could remove 99.8% of the dye in 45 min. Therefore, GO–PHEMA composite is a favorable green adsorbent for environmental applications.     

Magnetic Resonance Study of Fe-Implanted TiO<Subscript>2</Subscript> Rutile

Single-crystal (100) and (001) TiO₂ rutile substrates have been implanted with 40 keV Fe⁺ at room temperature with high doses in the range of (0.5–1.5) × 10¹⁷ ions/cm². A ferromagnetic resonance (FMR) signal has been observed for all samples with the intensity and the out-of-plane anisotropy increasing with the implantation dose. The FMR signal has been related to the formation of a percolated metal layer consisting of close-packed iron nanoparticles in the implanted region of TiO₂ substrate. Electron spin resonance (ESR) signal of paramagnetic Fe³⁺ ions substituting Ti⁴⁺ positions in the TiO₂ rutile structure has been also observed. The dependences of FMR resonance fields on the DC magnetic field orientation reveal a strong in-plane anisotropy for both (100) and (001) substrate planes. An origin of the in-plane anisotropy of FMR signal is attributed to the textured growth of the iron nanoparticles. As result of the nanoparticle growth aligned with respect to the structure of the rutile host, the in-plane magnetic anisotropy of the samples reflects the symmetry of the crystal structure of the TiO₂ substrates. Crystallographic directions of the preferential growth of iron nanoparticles have been determined by computer modeling of anisotropic ESR signal of substitutional Fe³⁺ ions.     

As(V) remediation using electrochemically synthesized maghemite nanoparticles

Maghemite nanoparticles were electrochemically synthesized from environmentally benign solutions in ambient conditions and utilized to remediate As(V) from aqueous solution. The average size and surface area of the maghemite nanoparticles were controlled to be 11–23 nm and 41–49 m² g^?1, respectively, by adjusting applied current density. The point of zero charge and crystallinity were independent of size. The effect of size and environmental conditions (i.e., maghemite nanoparticles content, contact time, and solution pH) on the adsorption of As(V) were systematically investigated. Similar to As(V) remediation using zero valent iron nanoparticles (NZVI), the kinetics of adsorption were best described by the pseudo first order model where the remediation is limited by the mass transfer of As(V) to adsorption sites of maghemite. The adsorption was spontaneous and endothermic which fitted with the Langmuir and Freundlich isotherms. The results observed in batch study indicate that maghemite nanoparticles were suitable adsorbent for remediating As(V) concentration to the limit (10 μg l^?1) recommended by the World Health Organization (WHO).     

Reduction of Se(VI) to Se(-II) by zerovalent iron nanoparticle suspensions

The reaction of selenate (Se(VI)) with zerovalent iron nanoparticles (nano Fe⁰) was studied using both conventional batch equilibrium and X-ray spectroscopic techniques. Nano Fe⁰ has a high uptake capacity for removal of dissolved Se(VI) reaching concentrations as high as 0.10 Se:Fe molar ratio in the solid product mixture. Kinetic studies of the Se(VI) uptake reaction in batch experiments showed an initial reaction rate (0–30 min) of 0.0364 min^?1 which was four times greater than conventional Fe⁰ powder. Analysis of the oxidation state of Se in the solid products by X-ray absorption near edge structure (XANES) spectroscopy showed evidence for the reduction of Se(VI) to insoluble selenide (Se(-II)) species. Structural analysis of the product by extended X-ray absorption fine structure (EXAFS) spectroscopy suggested that Se(-II) was associated with nano Fe⁰ oxidation products as a poorly ordered iron selenide (FeSe) compound. The fitted first shell Se–Fe interatomic distance of 2.402 (±0.004) Å matched closely with previous studies of the products of Se(IV)-treated Fe(II)-clays and zero-valent iron/iron carbide (Fe/Fe₃C). The poorly ordered FeSe product was associated with Fe⁰ corrosion product phases such as crystalline magnetite (Fe₃O₄) and Fe(III) oxyhydroxide. The results of this investigation suggest that nano Fe⁰ is a strong reducing agent capable of efficient reduction of soluble Se oxyanions to insoluble Se(-II).     

Growth and magnetic behavior of bismuth substituted yttrium iron garnet nanoparticles

Crystal growth and the magnetic properties of bismuth substituted yttrium iron garnet (Bi-YIG) nanoparticles were studied with particular focus on the bismuth composition dependence of the magnetic properties of the particles and the effects of annealing on the garnet phase formation. The Bi-YIG nanoparticles of 47–67 nm in size can be chemically synthesized when they are annealed at 650–850 °C. Both the lattice constant and the magnetization of the garnet nanoparticles linearly increase when the bismuth composition in the Bi-YIG particles increases. We have found that chemically synthesized nanoparticles transform from the amorphous to the garnet phase when annealed at temperatures below 650 °C, while the onset of magnetic moment of iron in the garnet nanoparticles is observed slightly above 650 °C. According to Mössbauer effect measurements, the hyperfine fields of ⁵⁷Fe at the tetrahedral and octahedral sites in the garnet are 39 and 48 T, respectively.     

Reduction of hematite with ethanol to produce magnetic nanoparticles of Fe3O4, Fe1 − x O or Fe0 coated with carbon

The production of magnetic nanoparticles of Fe₃O₄ or Fe⁰ coated with carbon and carbon nanotubes was investigated by the reduction of hematite with ethanol in a Temperature Programmed Reaction up to 950°C. XRD and Mössbauer measurements showed after reaction at 350°C the partial reduction of hematite to magnetite. At 600°C the hematite is completely reduced to magnetite (59%), wüstite (39%) and metallic iron (7%). At higher temperatures, carbide and metallic iron are the only phases present. TG weight losses suggested the formation of 3–56 wt.% carbon deposits after reaction with ethanol. It was observed by SEM images a high concentration of nanometric carbon filaments on the material surface. BET analyses showed a slight increase in the surface area after reaction. These materials have potential application as catalyst support and removal of spilled oil contaminants.     

Mössbauer study of iron oxide modified montmorillonite

Montmorillonite particles were modified by iron oxides using the precipitation process with the aim to monitor the differences in the structural and magnetic properties of intercalated and adsorbed Fe³⁺. The Mössbauer spectra recorded at 5 K in zero and 6 T external fields, IR spectra and TG curves measured in zero and 32 mT fields identified the ferrihydrite pillars in an interlayer space of the montmorillonite structure and γ-Fe₂O₃ nanoparticles adsorbed on the mineral surface. The temperature dependent Mössbauer spectra (25–300 K) reflect the superparamagnetic behaviour of maghemite nanoparticles and ferrihydrite pillars with the blocking temperatures of about 80 and 25 K, respectively.     

A simplified method for synthesis of Fe3O4@PAA nanoparticles and its application for the removal of basic dyes

A simplified method for synthesis of polyacrylic acid-bound iron oxide magnetic nanoparticles (Fe₃O₄@PAA NPs) was reported. The as-prepared nanoparticles were characterized by TEM, FT-IR, VSM and XRD. Characterization results indicated that PAA was successfully introduced onto the surface of Fe₃O₄ and did not cause any changes in magnetic property. The Fe₃O₄@PAA NPs were used to adsorb rhodamine 6G (R6G) as a model basic dye pollutant from aqueous solution. Kinetics data and adsorption isotherms were better fitted by pseudo-second-order kinetic model and Langmuir isotherm, respectively. The adsorption equilibrium could be reached at about 20 min, showing that the as-prepared adsorbent exhibited extremely rapid adsorption rate. The aqueous solution of the Yellow River was chosen as the test sample, and the results showed that the magnetic adsorbent was efficient for the removal of the basic dye in the real sample.     

Composition distributions in FePt(Au) nanoparticles

Ternary alloy FePt(Au) nanoparticles were prepared by the co-reduction of platinum(II) acetylacetonate and gold(III) acetate and the thermal decomposition of iron pentacarbonyl in hot phenyl ether in the presence of oleic acid and oleylamine ligands. This gave spherical particles with an average diameter of 4.4 nm with a range of diameters from approximately 1.6–9 nm. The as-synthesized particles had a solid solution, face-centered-cubic structure. Though the average composition of the particles was Fe₄₄Pt₄₅Au₁₁, individual particle analysis by Scanning Transmission Electron Microscopy–X-ray Energy Dispersive Spectroscopy showed a broad distribution in composition. In general, smaller-sized particles tended to have a lower amount of Au as compared to larger-sized particles. As the Au content increased, the ratio of Fe/Pt widened.     

Electrochemical synthesis of magnetic iron oxide nanoparticles with controlled size

We present a novel and facile method enabling synthesis of iron oxide nanoparticles, which are composed mainly of maghemite according to X-ray diffraction (XRD) and Mössbauer spectroscopy studies. The proposed process is realized by anodic iron polarization in deaerated LiCl solutions containing both water and ethanol. Water seems to play an important role in the synthesis. Morphology of the product was studied by means of transmission electron microscopy and XRD. In the solution containing almost 100% of water a black suspension of round shaped maghemite nanoparticles of 20–40 nm size is obtained. Regulating water concentration allows to control nanoparticle size, which is reduced to 4–6 nm for 5% of water with a possibility to reach intermediate sizes. For 3% or lower water concentration nanoparticles are of a needle-like shape and form a reddish suspension. In this case phase determination is problematic due to a small particle size with the thickness of roughly 3 nm. However, XRD studies indicate the presence of ferrihydrite. Coercivities of the materials are similar to those reported for nanoparticle magnetite powders, whereas the saturation magnetization values are considerably smaller.     

Preparation and characterization of hybrid nanoparticles based on chitosan and poly(methacryloylglycylglycine)

CeO₂–MnO _x composites possessing rod-like morphology (fixed mole proportion of Ce/Mn) were synthesized through hydrothermal method and chosen as supporters to load PdO nanoparticles (PdO/Ce _x Mn_1–x ). The size of loaded PdO nanoparticles is about 2 nm. The catalytic behaviors of supported catalysts were examined through the complete catalytic oxidation of benzene. The results illustrated that the activities of supported catalysts were enhanced greatly as compared to unsupported, and the completely conversion temperature of benzene was reduced to ca. 250 °C. The effect of noble metal species (PdO) addition on the catalytic property and crystal structure of composites was researched in detail. The data revealed that the interaction between PdO and supporter, and intrinsic properties of supporter resulted in the enhancement of catalytic abilities.     

Fluorescence of a Histidine-Modified Enhanced Green Fluorescent Protein (EGFP) Effectively Quenched by Copper(II) Ions

Two histidines were introduced by site-directed mutagenesis into the structure of Enhanced Green Fluorescent Protein, replacing the serine at position 202 and the glutamine at position 204 for increasing the sensitivity of the protein towards different metal ions by creating possible metal binding sites near the chromophore group. There is no appreciable difference between the absorbance and fluorescence spectra of the two proteins (wild type and the double-histidine mutant) indicating that the mutation does not change the environment of the fluorophore. Fluorescence quenching was measured at different pH (6.5–8) and temperatures (20–45 °C) varying the concentration of metal ions. Under optimal conditions (pH?=?7.5, 20 °C) the mutant’s K_d is 16 nM, it binds copper more than 200fold stronger than the wild type EGFP.     

Spectroscopic Determination of Cysteine with Alizarin Red S and Copper

ABSTRACT

The interaction between metal complex Cu²⁺–ARS (Alizarin Red S) and l-cysteine was investigated via fluorescence and absorption spectroscopies. In pH 5.2 Britton–Robinson buffer, the addition of L-cysteine into Cu²⁺–ARS system resulted in a fluorescence enhancement because cysteine reduced Cu²⁺ to Cu⁺, which led to Cu²⁺–ARS decompound, and ARS was released. The result was also supported by absorption spectroscopy change. A good linear response of fluorescence intensity as a function of cysteine concentration was obtained ranging from 1.0 × 10^?6 to 4.0 × 10^?5 mol L^?1 with the detection limit as 1.08 × 10^?7 mol L^?1. The introduced method has high selectivity over other amino acids such as cystine, tyrosine, tryptophan, methionine, and glycine. It was applied to determine cysteine in protein hydrolysate of fresh pig blood with recovery of 88.4–100.2%.     

Determination of Montelukast in Plasma Using β − Cyclodextrins Coated on CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Magnetic Nanoparticles in Luminol–H<Subscript>2</Subscript>O<Subscript>2</Subscript> Chemiluminescence System Optimized by Doehlert Design

A novel chemiluminescence method using β ? cyclodextrins coated on CoFe₂O₄ magnetic nanoparticles is proposed for the chemiluminometric determination of montelukast in plasma. The effect of coated β ? cyclodexterinon CoFe₂O₄ magnetic nanoparticles in the chemiluminescence of luminol–H₂O₂ system was investigated. It was found that β ? cyclodexterin coated on CoFe₂O₄ magnetic nanoparticles could greatly enhance the chemiluminescence of the luminol–H₂O₂ system. Doehlert design was applied in order to optimize the number of experiments to be carried out to ascertain the possible interactions between the parameters and their effects on the chemiluminescence emission intensity. This design was selected because the levels of each variable may vary in a very efficient way with few experiments. Doehlert design and response surface methodology have been employed for optimization pH and concentrations of the components. Results showed under the optimized experimental conditions, the relative CL intensity (ΔI) is increased linearly in the concentration range of 0.003–0.586 μgml^?1 of montelukast with limit of detection (LOD) 1.09 × 10^?4 μgml^?1 at S/N ratio of 3, limit of quantitative (LOQ) 3.59 × 10^?4 μgml^?1 and the relative standard deviation 2_.63 %. The method has been successfully applied to the determination of montelukast in plasma of human body. Results specified that relative chemiluminescence intensity (ΔI) has good proportional with the montelukast concentration with R² = 0.99979. The test of the recovery efficiency for known amounts of montelukast was also performed, the recoveries range obtained from 98.2 to 103.3 %, with RSDs of <4 % indicated that the proposed method was reliable.     

Enhancement of transport of curcumin to brain in mice by poly(n-butylcyanoacrylate) nanoparticle

Curcumin, a widely used coloring agent and spice in food, has a potential in blocking brain tumor formation and curing Alzheimer’s disease. Due to the specific properties of blood–brain barrier (BBB), only traces of curcumin were transported across BBB. The aim of the present study was to design and characterize curcumin loaded polybutylcyanoacrylate nanoparticles (PBCN) coated with polysorbate 80, and to evaluate the effect of PBCN as a delivery system on carrying curcumin across BBB. Curcumin loaded nanoparticles were prepared by an anionic polymerization method, and they presented in a core–shell spherical shape under transmission electron microscopy, with an average diameter of 152.0 nm. The average drug loading was 21.1%. Physicochemical status of curcumin in the nanoparticles was confirmed with differential scanning colorimetry and Fourier transform infrared spectroscopy. The in vitro release behavior of drug from the nanoparticles was fitted to a double phase kinetics model. The studies of pharmacokinetic and bio-distribution to brain were conducted in mice after intravenous administration of the nanoparticle formulation at the dose of 5 mg/kg and curcumin solution at the dose of 10 mg/kg via the tail vein. The results showed that in plasma, the area under concentration–time curve (AUC_0–∞) for curcumin loaded nanoparticles was greater than that for the control solution, moreover, the mean residence time of curcumin loaded nanoparticles was 14-fold that of the control solution. In brain, AUC_0–∞ for curcumin loaded nanoparticles was 2.53-fold that for the control solution. In conclusion, the present study demonstrated that PBCN could enhance the transport of curcumin to brain and have a potential as a delivery system to cross the BBB.