Studies of the Intramolecular Aromatic-ring Stacking Interactions in the Ternary Platinum（Ⅱ） Complexes

The stability constants of some ternary mixed-ligand complexes, Pt (Phen)(CA) , where Phen-1,10-phenanthroline and CA^-=carboxylate, were determined by means of potentiometric pH titration in aqueous solutions (I=0. 1mol/L, KNO3; 25℃), and the stability of them was compared with that of the corresponding binary complexes. It was revealed that the ternary complexes containing phenylalkane carboxylates ligands (PCA-) are much more stable than those formed with formate and acetate. The results indicate that there exist the intramolecular aromatic-ring interactions between the phenanthroline ring of Phen and the phenyl moiety of ligand PCA- in the ternary mixed-ligand Pt(Phen) (PCA)^- complexes. The extent of the stacking interactions, which depends on the number of methylene groups between the phenyl moieties and the coordinated phenylalkane carboxylate groups, was calculated. The best-fitted stack was obtained for the complexes with 2-phenylacetate and 3-phenylpropionate as the ligands.     

Electrical Percolation of Carbon Black Filled Poly （ethylene oxide） Composites in Relation to the Matrix Morphology

The present work studies the electrical conduction performance of carbon blaak (CB) filled poly(ethylene oxide) (PEO) composites. The addition of CB leads to reduced matrix crystallinity as the fillers which are partly situated inside the lamellae and hinder the growth of PEO crystallites. As a result, the electrical percolation behavior is related with the matrix morphology.     

Synthesis and Structure Analysis of N-（Dehydroabietyl）maleamic Acid

N-(Dehydroabietyl)maleamic acid was synthesized from dehydroabietylamine and maleic anhydride.Its structure was characterized by IR,1 H-and 13 C-NMR spectra.The stereo structure of the title compound was also unambiguously confirmed by X-ray crystal structure analysis.The white crystal crystallizes in the monoclinic system,space group P2 1 with a=12.075(2),b=10.377(2),c=17.840(4),β=100.31(3) °,V=2199.3(8) 3,R=0.0618 and wR=0.1437.Two crystallographically independent molecules with different conformations co-exist in the unit.In each molecule,the two cyclohexane rings form a trans ring junction with chair and half-chair conformations,respectively.The C=C double bond between two carbonyl groups is in a Z configuration.Intermolecular and intramolecular hydrogen bonds coexist to stabilize the structure.     

DFT Study of Thiophene Adsorption on the Pd（111） and Pt（111） Surfaces

Thiophene adsorption on the(111) surfaces of Pd and Pt have been investigated by density functional theory.The results indicate that the adsorption at the hollow sites is the most stable.To our interest,the molecular plane of thiophene ring is distorted with C=C bond being elongated to 1.450  and C-C bond being shortened to 1.347 ,and the C-H bonds tilt 13.91～44.05o away from this plane.Furthermore,analysis on population and density of states verified the calculated adsorption geometries.Finally,charge analysis suggests that thiophene molecule is an electron acceptor,reflecting the interaction between the lone pair of sulfur and the d-orbitals of metal.     

Synthesis and Properties of Poly （aryl ether ketone） Copolymers Containing 2,7-Naphthalene Moieties

IntroductionPoly(aryl ether ketone)s are high performance en-gineering plastics with outstanding physical,chemical,thermal and mechanical properties and have been ap-plied to the aerospace industry,the electronic industry,the automobile industry,the petro…     

Synthesis and Characterization of Amphiphific Block Copolymer Containing PVP and Poly（5-benzyloxytrimethylene carbonate）

Amphiphilic copolymer of 5-benzyloxytrimethylene carbonate （BTMC） with poly （vinyl pyrrolidone） （PVP） was successfully synthesized using immobilized porcine pancreas lipase （IPPL） or SnOct2 as catalyst. Hydroxyl terminated PVP, synthesized with 2-mercaptoethanol as a chain transfer reagent, was employed as a rnacroinitiator. The resulting copolymers were characterized by GPC, ^1H NMR and IR. Increasing the BTMC/PVP-OH feed ratio （[B]/[P]） resulted in the increase of Mn of corresponding copolymers and the decrease of Mw/Mn. Immobilized enzyme has comparable catalytic activity to SnOct2 for the copolymerization.     

The Research of Novel Ti（IV）/PNP/MAO Catalyst System for Ethylene Oligomerization

合成了三种PNP配体,并与Ti（IV）作用形成催化剂,利用核磁共振氢谱、元素分析及质谱对配体及催化剂进行了结构表征。在助催化剂甲基铝氧烷（MAO）存在的条件下,催化乙烯齐聚。试验结果表明：钛（IV）剂催化活性最高可达2．58×105g／（molTi·h）,α-烯烃选择性达80．72％。     

Density Functional Theory Study of C2Hx（x=4～6） Adsorption on the Fe（110） Surface

The density functional theory(DFT) and self-consistent periodic calculation were used to investigate the C2Hx(x = 4～6) species adsorption on the Fe(110) surface. The adsorption energy and equilibrium geometry of the species C2Hx(x = 4～6) on four possible sites(top,hcp,SB and LB) on the Fe(110) surface were predicted and compared. Mulliken charges and density of states analysis of the most stable site have been discussed. It is found that the species of C2H6 and C2H5 are adsorbed strongly on the Fe(110) surface with calculated adsorption energy of -80.24 and -178.89 kJ·mol-1 at the Fe-LB(long-bridge) ,respectively. However,the C2H4 is adsorbed strongly on the Fe(110) surface with calculated adsorption energies of -114.96 kJ·mol-1 at the top. The results indicate that the charge transferring process can be completed by chemisorption between Fe(110) surface and the species. Moreover,the chemical bands can be formed by chemisorptions between the Fe(110) surface and the species,too.     

Enamine Configuration of 5-Methyl-2-phenyl-4-[（Z）-3-tolylamino-phenylmethylene]pyrazol-3（2H）-one

1 INTRODUCTION In contrast to the old-line academic and practical studies of 1-phenyl-3-methyl-4-benzoyl-5-pyrazo- lone (PMBP) on the metal coordination chemistry[1], the complexes of β-ketoamines derivated from PMBP received little attention due to its complicated com- plexation. However, in recent years, there has a sudden growth of this area as a result of its timely interest in biological activities[2]. Recently, a series of β-ketoamines[3] containing PMBP have been prepared fro…     

Density functional theory for adsorption of HCHO on the FeO（100） surface

The density functional theory (DFT) and periodic slab model were used to get information concerning the adsorption of HCHO on the FeO(100) surface. A preferred η2-(C,O)-di-σ four-membered ring adsorption conformation on the Fe-top site was found to be the most favorable structure with the predicted adsorption energy of 210.7 kJ/mol. The analysis of density of states, Mulliken population, and vibrational frequencies before and after adsorption showed clear weakening of the carbonyl bond, and high sp3 charact...     

Environmental degradation of a novel ethylene-propylene copolymer in thick sheets

The outdoor ageing of a commercial ethylene-propylene copolymer (Adflex) is investigated. Different techniques (infrared spectroscopy, thermal analysis, scanning electron microscopy, mechanical tests and positron annihilation lifetime spectroscopy) are used in order to obtain a comprehensive view of the modifications occurring during the environmental ageing of thick sheets of this copolymer. The degradation of the material is ascribed to a morphology variation, arising from the separation of amorphous oxidised copolymers initially dispersed in the bulk of the material. Weathering process takes places with increase of the bulk density of the sample.     

Chemical ageing effects on the mechanical behaviour of ethylene-propylene diene monomer

Ethylene-propylene diene monomer (EPDM) elastomer diaphragm failures due to material degradation pose a major risk in the biopharmaceutical industry, as they can result in long periods of production downtime. It is suspected that a key cause of this EPDM degradation is due to the chemical solutions used in equipment cleaning processes. However this has never been empirically investigated in the public domain. Twenty four virgin samples were utilised for testing, twelve of which were subject to common chemical cleaning solutions used in the biopharmaceutical sector. The chemical solutions under investigation were aqueous solutions of NaOH, NaClO, H₃PO₄, and the interaction between 100 °C H₂O and NaClO. The characterisation of the degradation process was conducted by mechanical testing. The results show that degradation of the polymer bulk proceeds predominantly via crosslinking for all exposure types. NaOH and H₃PO₄ exposure results in an accelerated rate of crosslinking compared to NaClO in the early stages of exposure.     

Relevance of the femtolaser notch sharpening to the fracture of ethylene-propylene block copolymers

The effect of the notch sharpening on the fracture toughness measured under Linear Elastic Fracture Mechanics (LEFM), Elastic-Plastic Fracture Mechanics (EPFM) and Post-Yielding Fracture Mechanics (PYFM) approaches has been evaluated. Bulk and film specimens of an ethylene-propylene block copolymer have been analyzed. The samples for fracture characterization were sharpened using a steel razor blade and the femtosecond laser ablation technique. Both notching techniques give rise to crack tip radii of the very same size. The fracture toughness of the specimens sharpened via femtolaser were ∼10%, ∼75% and ∼90% lower than that of the specimens sharpened via razor blade when determined with the help of LEFM, the EPFM approach as the multiple specimen method, and by the Essential Work of Fracture, respectively. Both in the bulk samples as in the films, the presence of plastic deformation, either large or small, occurring ahead of the crack tip during the sharpening seems to be the reason for the difference in the fracture values.     

Characterization of the ground state pyrene complex in ethylene-propylene copolymer solutions

Pyrene-labeled functionalized ethylene-propylene (EP) copolymer was prepared by grafting 1-pyrenebutyrylhydrazine onto EP copolymer through maleic anhydride pendants. The EP copolymer contained 60 mol % ethylene; its weight-average molecular weight (M^w) was 148,000. The pyrene-labeled amide functionalized EP copolymer, PA-EP(60/40), was made to simulate the amine functionalized EP copolymers that are commonly used as dispersant additives in motor oils. UV absorption spectra, fluorescence emission and excitation spectra, and fluorescence decay profiles of the pyrene were studied to determine the copolymer conformation and dynamics in methylcyclohexane and tetrahydrofuran (THF). The pyrene fluorescence characteristics of PA-EP(60/40) were highly dependent on the solvent. The dependence of fluorescence emission intensity on the excitation wavelength was large in methylcyclohexane and moderate in THF. A frequency shift of about 2 nm was observed between the excitation spectrum obtained with the emission line at 377 nm and that at 550 nm in the methylcyclohexane solutions, but no shift was found in the corresponding tetrahydrofuran solutions. The ratios of the preexponential factors (a₂₁/a₂₂) of the excimer decays obtained in both methylcyclohexane and THF solutions were different from ?1.0. However, the deviation of the excimer formation process from the Birks scheme is small in THF but large in methylcyclohexane. In addition, the Huggins constants obtained from intrinsic viscosity measurements of the PA-EP(60/40) copolymer solutions suggest that copolymer aggregation occurs in methylcyclohexane but not in THF. H-bonding between two pyrene-containing pendants is apparently the main driving force for the formation of the ground state pyrene complex. THF is found to be effective in inhibiting the H-bonding formation. © 1995 John Wiley & Sons, Inc.     

Formation of C7-species pyrolysis products from ethylene-propylene heterosequences of poly(ethylene-co-propylene)

Properties of ethylene-propylene copolymer (EPM) are determined by ethylene/propylene ratio and degree of block and random sequences. EPM was pyrolyzed and the pyrolysis products were analyzed using gas chromatography/mass spectrometry (GC/MS) to examine pyrolysis products formed from the ethylene-propylene heterosequences. Pyrolysis products formed from EPM were compared with those formed from polyethylene (PE) and polypropylene (PP) to determine the pyrolysis products formed from ethylene-propylene heterosequences of EPM. Principal pyrolysis products formed from ethylene-propylene heterosequences were 3-methyl-1-hexene, 4-methyl-1-hexene, 2-methyl-1-hexene, and 2-heptene. Order of the relative intensity of the pyrolysis products was 2-methyl-1-hexene > 4-methyl-1-hexene > 3-methyl-1-hexene > 2-heptene. The relative abundances of the pyrolysis products decreased as the pyrolysis temperature increased. Relative abundances of the specific pyrolysis products formed from ethylene-propylene heterosequences may be used for determination of the relative degree of random sequences of EPM as well as ethylene-propylene-diene terpolymer (EPDM).     

TMS的NMR量子化学计算

分别用HF/4-31G(Si=6-21G)、B3LYP/6-31G(D)、B3LYP/6-31G、HF/6-31G、MP2/6-31G(D)对TMS进行了结构优化,在此基础上,用Hartree-Fock、B3LYP理论水平下,分别用不同的基组6-31G、6-31++G(D,P)、6-311+G(2D,P)、6-311++G(D,P)进行NMR的计算;在MP2理论水平上,用STO-3G、3-21G、4-31G、6-31G、6-31G(D)、6-31++G(D,P)等基组进行NMR的计算.并用GAUSSION98程序所给出的四种计算NMR的方法:GIAO、IGAIM、CSGT、SINGLE GAUGE ORIGIN,分别在上述基础上进行了TMS的屏蔽值的计算.研究结果表明,就理论水平而言,DFT(B3LYP)比HF计算结果要好,而且基组越大,计算精度越高,但有一饱和基组存在.就计算方法而言,用GIAO有利于计算精度的提高.计算结果与实验值基本上吻合.     

Structure and mechanical properties of SRP/HDPE/POE (EPR or EPDM) composites

The effects of dicumyl peroxide (DCP) and ethylene-octylene copolymer (POE), ethylene-propylene copolymer (EPR) or ethylene-propylene-diene terpolymer (EPDM) on the structure and properties of scrap rubber powder (SRP)/high-density polyethylene (HDPE) composites were studied. Torque and gel content results show that DCP promotes crosslinking of the SRP/HDPE/POE (EPR or EPDM) composites. The SRP/HDPE/POE (EPR or EPDM) composites containing a small amount of DCP have better mechanical properties than their corresponding composites without DCP. Highest tensile strength and elongation at break are found in the dynamically vulcanized SRP/HDPE/POE composite. Scanning electron microscopy (SEM) results show that good bonding between SRP and matrix is formed in the SRP/HDPE/POE (EPR or EPDM) composites with DCP.     

Toughening of poly(propylene carbonate) by carbon dioxide copolymer poly(urethane-amine) via hydrogen bonding interaction

A carbon dioxide copolymer poly(urethane-amine)(PUA) was blended with poly(propylene carbonate)(PPC) in order to improve the toughness and flexibility of PPC without sacrificing other mechanical properties. Compared with pure PPC, the PPC/PUA blend with 5 wt% PUA loading showed a 400% increase in elongation at break, whilst the corresponding yielding strength remained as high as 33.5 MPa and Young's modulus showed slightly decrease. The intermolecular hydrogen bonding interaction in PPC/PUA blends was comfirmed by FTIR, 2D IR and XPS spectra analysis, and finely dispersed particulate structure of PUA in PPC was observed in the SEM images, which provided good evidence for the toughening mechanism of PPC.     

The segmental and global dynamics in lamellar microphase-separated poly(styrene-b-isoprene) diblock copolymer studied by H NMR and dielectric spectroscopy

The nuclear magnetic resonance (NMR) and dielectric spectroscopy (DS) methods were used to investigate the segmental and global dynamics in lamellar microphase separated poly(styrene-b-isoprene) (SI) diblock copolymer. For the first time, the susceptibility representation of the NMR relaxation data is applied to the analysis of the molecular dynamics in complex polymer systems like the diblock copolymer. This approach in combination with the frequency-temperature superposition (FTS) allows one to compare directly the NMR and DS data in an extended frequency range providing a unique comprehensive picture of various relaxation processes present in the system studied. The findings of these investigations include structural relaxations of the polyisoprene (PI) and the polystyrene (PS) blocks, a normal mode relaxation of the PI block, and an extra low frequency interfacial relaxation. Special attention has been devoted to influence of the copolymer morphology on the segmental and global dynamics in PI.     

From self-assembled monolayers to chemically patterned brushes: Controlling the orientation of block copolymer domains in films by substrate modification

Block copolymer lithography is emerging as one of the leading technologies for patterning nanoscale dense features. In almost all potential applications of this technology, control over the orientation of cylindrical and lamellar domains is required for pattern transfer from the block copolymer film. This review highlights the state-of-art development of brushes to modify the substrates to control the assembly behaviors of block copolymers in films. Selected important contributions to the development of self-assembled monolayers, polymer brushes and mats, and chemically patterned brushes are discussed.