Brdicka-type processes of cysteine and cysteine-containing peptides on silver amalgam electrodes

Silver solid amalgam electrode (AgSAE) was used for differential pulse voltammetric (DPV) measurements of cysteine and cysteine-containing peptides, glutathione, gamma-Glu-Cys-Gly and phytochelatin (gamma-Glu-Cys)(3)-Gly (PC3), in the presence of Co(II) ions. It had been established earlier that cysteine-containing peptides and proteins catalyze hydrogen evolution at mercury electrodes in presence of cobalt salts; these processes are known as the Brdicka reaction. DPV signals measured with the AgSAE, the surfaces of which had been modified by mercury meniscus or mercury film, were qualitatively the same as those obtained with the hanging mercury drop electrode (HMDE). With these electrodes the number and the intensity of Brdicka signals of cysteine, glutathione and PC3 differed, making a distinction among them possible. On the other hand, with the polished silver solid amalgam electrode (the surface of which was completely free of liquid mercury) all three compounds produced only one but strikingly intense peak in the region of Brdicka reaction. Using this signal, cysteine, glutathione as well as PC3 could be determined at 10(-8)M level, representing sensitivity up to 2 orders of magnitude better than attained with the mercury-modified AgSAEs or HMDE.     

Electrocatalytic Determination of Nitrite on a Rigid Disk Electrode Having Cobalt Phthalocyanine Prepared In Situ

This work reports an in situ cobalt(II) phthalocyanine (CoPc) synthesis on a SiO₂/SnO₂ (SiSn) matrix surface obtained by the sol‐gel method and its electrocatalytic activity for oxidation of nitrite. A rigid disk electrode with SiSn/CoPc was used to study the electrooxidation of nitrite by the cyclic voltammetric, chronoamperometric techniques and differential pulse voltammetry (DPV). The adsorbed phthalocyanine electrocatalyzed nitrite oxidation at 0.73 V (versus SCE) using the DPV technique. The anodic peak current intensities, plotted from differential pulse voltammograms in 1 mol L^?1 KCl for the concentration range 0.002 to 3.85 mmol L^?1 of nitrite were linear, with a correlation coefficient of 0.998 and a detection limit of 0.95 μmol L^?1.     

Co(phen)33+与6-巯基嘌呤及DNA间相互作用的研究

自1969年首次报道顺铂(cis-[Pt(NH 3 ) 2 Cl 2 ])对肿瘤有强烈抑制作用以来,金属配合物抗肿瘤药物的研究倍受重视 [1,2] ?很多抗肿瘤药物治疗恶性肿瘤疾病都是通过切割人体肿瘤细胞的DNA来实现的?DNA与外源性分子相互作用的研究构成肿瘤形成的机理和一些抗肿瘤药物作用机理的基     

Study of Cd2+ complexation by the glutathione fragments Cys-Gly (CG) and gamma-Glu-Cys (gamma-EC) by differential pulse polarography

A differential pulse polarographic study of the Cd2+/gamma-Glu-Cys and Cd2+/Cys-Gly systems assisted by the alternating least-squares multivariate curve resolution (MCR-ALS) method was carried out to obtain a better understanding of the different metal affinities of the complexation sites on glutathione (GSH). The simultaneous analysis of the titration of peptide with metal and of metal with peptide allowed the resolution of the Cd2+/Cys-Gly system, whereas in the analysis of the Cd2+/gamma-Glu-Cys system the analysis of a single titration experiment was sufficient. The analysis of the shape of the resulting pure voltammograms and concentration profiles of the resolved components suggested the presence of two different types of bound Cd2+ in the two systems considered, that could be attributed to Cd2+ bound to one or two sulfur atoms to form complexes of stoichiometry 1:1 and 1:2. respectively.     

Use of binary metal deposits on a cylindrical carbon-fiber microelectrode in the voltammetric determination of metal ions

The effect of binary metal deposits on a cylindrical carbon-fiber microelectrode on the determination of metals by direct and stripping voltammetry was studied. The electrolytic deposition of a binary system of copper and thallium, cadmium, lead, or mercury on the electrode in an alkaline solution resulted in the disappearance of the electroreduction peak of dissolved oxygen in the potential range from -0.8 to -1.4 V and in a decrease in the background current. Under the conditions of limited diffusion, the peak currents of Ni(II), Co(II), and Zn(II) in differential pulse voltammograms were 3–7 times higher than those calculated for a reversible electrode process under the conditions of semi-infinite diffusion. Because of this, the determination limit for metal ions in direct voltammetry was lowered to 1 X 10^-6 M. With a binary copper-thallium system, the peak current of zinc(II) reduction can be be detected in the presence of 5000-fold molar amounts of copper(II). The deposition of binary copper-lead and copper-thallium systems under the conditions of limited diffusion reduced the effect of negative interaction between the components of these systems and made possible the determination of lead(II) and thallium(I) by stripping voltammetry using additional peaks.     

Cathodic adsorption voltammetry of palladium(II)

The electrochemical behavior of palladium(II) was studied by differential pulse, linear sweep, and alternating-current square-wave voltammetry in HC1, HNO₃, H₂SO₄, and HC1O₄ solutions in the presence of dimethylglyoxime. A peak with a height linearly depending on the concentration of palladium(II) was observed in voltammograms. Typical relationships between the height and potential of a peak and pH, dimethylglyoxime concentration, the potential and time of adsorption accumulation suggested that the observed peak was due to the hydrogen liberation catalyzed by palladium(II) dimethylglyoximate adsorbed on the electrode surface. The detection limits for palladium(II) accumulated for 120 s at -0.2 V were 2 x 10^-8, 5 x 10^-9, and 8 x 10^-10 M for differential pulse, linear sweep, and alternating-current square-wave voltammetry, respectively.     

2,2'-联吡啶In(Ⅲ)配合物与DNA作用的电化学研究

应用循环伏安法、微分脉冲伏安法和交流阻抗法研究了配合物In(bpy)Cl3.H2O与DNA在Tris-HCl缓冲溶液(pH=7.2)中的相互作用.结果表明:配合物中心In(Ⅲ)离子的循环伏安曲线上呈现一对准可逆的氧化还原波,DNA与配合物作用后,配位中心离子的氧化还原峰电流明显降低,扩散系数减小,电化学反应阻抗增大,式量电位负移,表明该配合物与DNA的作用方式为静电结合.     

Investigation of the vanadium(III)/vanadium(II)/ N-(hydroxyethyl)ethylenediaminetriacetic acid system by cyclic voltammetry and differential pulse polarography

Cyclic voltammetry and differential pulse polarography (d.p.p.) are used to study the influence of pH and metal complex concentration on the voltammetric responses of the V(III)/V(II)/ N- (hydroxyethyl)ethylenediaminetriacetic acid (HEDTA) system. The monomer-dimer equilibrium of V(III)HEDTA gives rise to typical patterns on cyclic voltammograms. The formation constant for (V(III)HEDTA)₂ is evaluated by d.p.p. The dimer-monomer concentration ratios representing the equilibrium in the bulk solution can be obtained only when the drop time of the mercury electrode is ?0.2 s. The pH-independent value of the half-wave potential for the reduction of V(III)HEDTA to V(II)HEDTA is used to evaluate the ratio of the formation constants of V(III)HEDTA and V(II)HEDTA. The suitability of V(III)HEDTA as a model complex for V(III) in ascidians (primitive marine organisms) is discussed.     

Bismuth film electrodes for the study of metal thiolate complexation: An alternative to mercury electrodes

A comparative study of the usual static mercury drop electrode (SMDE) and the bismuth film electrode (BiFE) as applied to the analysis of metal complexation by thiol-rich peptides is done. Preliminary experiments on BiFE by differential pulse voltammetry showed that Cd(II) and Pb(II)-ions behave in a similar way as using stripping voltammetry and stripping chronopotentiometry with regard to some splitting effects of the signals. Additionally, on BiFE glutathione (GSH) and some phytochelatins (PC_n) produce quite irregular signals related to the anodic oxidation of bismuth, which restricted the studies to a narrower concentration range than on SMDE. In the presence of both metal ion and peptide the same characteristic signals were observed on BiFE and SMDE, but better resolution was achieved in the first one, allowing a qualitative analysis of the complexation process for the Pb-GSH system which was not possible on SMDE. This suggests that BiFE may be a complementary tool to Hg electrodes, if not a valuable alternative, in the study of metal complexation.     

Asymmetric logistic peak as a suitable function for the resolution of highly asymmetric voltammograms in non-bilinear systems

The asymmetric logistic peak is tested as a new function for the parametric signal fitting (PSF) of highly asymmetric electrochemical signals in non-bilinear datasets, such as those obtained in linear sweep voltammetry (LSV) or in the presence of irreversible electrochemical processes. This new multivariate curve resolution strategy (PSF-ALPA) is successfully applied to LS voltammograms measured for the Cd(II)-glutathione system with a hanging mercury drop electrode, where Cd(II) is reversibly reduced, and to differential pulse voltammograms (DPV) measured at a glassy carbon electrode, where Cd(II) reduction becomes irreversible. Matrix augmentation by using LS voltammograms measured at different scan rates provides good results and encourages the development of ALPA methodology for third order data.     

Application of catalytic adsorptive stripping voltammetry of the cobalt-alpha-benzil dioxime complex to analysis of cobalt traces in metallic zinc

The catalytic adsorptive stripping voltammetric method with alpha-benzil dioxime and nitrite affords numerous advantages in cobalt determination. The detailed conditions of the determination of the cobalt traces in metallic zinc by catalytic adsorptive stripping voltammetry have been investigated. Both the linear sweep and the differential pulse stripping modes can be used with similar sensitivity. Possible interferences by Mn, Pb, Cu, Ni and Fe are evaluated. In the presence of 5 x 10(5) fold excess of Zn the linear dependence of the cobalt CASV peak current on concentration ranged from 0.05 mug/l to 3 mug/l. Optimal conditions include the accumulation potential of -0.65 V and the accumulation time of 10 sec. The results of the determination of 10(-5)% level of Co in the metallic zinc showed good reproducibility (relative standard deviation, RSD = 0.07) and reliability.     

Combined use of the potential shift correction and the simultaneous treatment of spectroscopic and electrochemical data by multivariate curve resolution: analysis of a Pb(II)-phytochelatin system

The combined use of differential pulse polarography (DPP), circular dichroism (CD) and multivariate curve resolution by alternating least squares (MCR-ALS), with potential shift correction for data analysis, provides valuable information on the complexation of Pb(ii) by the phytochelatin (gamma-Glu-Cys)(3)-Gly (PC(3)). All data confirm the formation of the predominant 1 : 1 Pb-PC(3) complex. However, in the presence of an excess of Pb(ii), the same complex seems to be present but with some modification in its structure. This is suggested by the shift towards more negative potentials of the DPP signal, and by a dramatic change in CD spectra. This evolution seems to be more related to a conformational change of the complex than with a modification of the electrochemical process kinetics.     

Ferrocene-mannose conjugates as electrochemical molecular sensors for concanavalin A lectin

The binding affinity of a series of electroactive glycoconjugates, based on a ferrocene core bearing alpha-mannose units on one or both of its cyclopentadienyl rings, to lectin Con A was studied by isothermal titration calorimetry (ITC) and voltammetry. Voltammetric measurements were performed by differential pulse adsorptive stripping voltammetry (DPAdSV). Upon complexation of ferrocene-mannose conjugates with Con A, voltammograms showed a decrease of the peak current. Both the monomannosylated ferrocene and the bis(mannosylated) ferrocene derivatives form more stable complexes with Con A than methyl alpha-D-mannopyranoside. Bis(mannosylated) ferrocene conjugates were found to bind to Con A with enhanced affinity due to the multivalent effect. A comparison of the thermodynamic data obtained by ITC and voltammetry is presented.     

Determination of Cobalt Ions in Natural Waters Using Differential Pulse Adsorptive Stripping Voltammetry

Abstract

Differential pulse adsorptive stripping voltammetry using dimethylglyoxime complexes in the presence of triethanolamine and ammonium chloride can be applied to the determination of cobalt (II) ions in natural waters with high sensitivity. The limit of detection is about 3 ppt. Actual analysis of estuary water are reported. In this particular case of natural water, the factors influencing the use of differential pulse adsorptive stripping voltammetry for the determination of cobalt are described in detail.     

Application of adsorptive stripping voltammetry (AdSV) for the analysis of trace metals in brine

Summary Routine analysis of brine for trace metals is important for safe and economical production in the alkali chloride electrolysis. As opposed to many spectroscopic techniques, trace metal determination by adsorptive stripping voltammetry (AdSV) is shown to be performed directly in brine. With minimal sample preparation chromium(VI), iron(III), nickel(II), cobalt(II), titanum(IV), manganese(II), molybdenum(VI) and vanadium(V) can be determined within minutes. The influence of parameters such as pH-value, supporting electrolyte solution, concentration of complexing reagents and possible interferents are investigated for optimal experimental conditions. Minimum detection limits are less than 5 ng/g for all trace metals except 1 ng/g for chromium(VI), cobalt(II) and molybdenium(VI) for 40 s adsorption periods with precisions of better than 7%. AdSV with linear or differential pulse scan is discussed.     

Bucky-gel coated glassy carbon electrodes, for voltammetric detection of femtomolar leveled lead ions

Femtomolar (fM) leveled lead ions were electrochemically detected using a bucky-gel coated glassy carbon electrode and differential pulse anodic stripping voltammetry. The bucky-gel was composed of dithizone, ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate), and multi-walled carbon nanotubes (MWCNTs). The fabrication of the bucky-gel coated electrode was optimized. The modified electrode was characterized with voltammetry, electrochemical impedance spectroscopy, and chronoamperometry. After the accumulation of lead ions into the bucky-gel modified electrode at −1.2 V vs. saturated calomel electrode (SCE) for 5 min in a pH 4.4 sodium acetate-acetate acid buffer solution, differential pulse anodic stripping voltammograms of the accumulated lead show an anodic wave at −0.58 V. The anodic peak current is detectable for lead ions in the concentration range from 1.0 μM down to 500 fM. The detection limit is calculated to be 100 fM. The proposed method was successfully applied for the detection of lead ions in lake water.     

Differential pulse cathodic stripping voltammetry of the copper complexes of glycyl-L-histidyl-glycine at a hanging mercury drop electrode

The behaviour of the copper complexes of glycyl-L-histidyl-glycine (GHG) was investigated using cyclic voltammetry and differential pulse voltammetry after their adsorptive accumulation on the surface of a hanging mercury drop electrode (HMDE). The nature of the observed cathodic and anodic peaks was established and optimum conditions were found for the differential pulse cathodic stripping voltammetric detemination of GHG at the 1 x 10(-8)M concentration level using adsorptive accumulation at -0.20 V vs. Ag/AgCl reference electrode and the cathodic stripping peak around -0.4 V (pH 8.3). This peak corresponds to the reduction of the Cu(I)-GHG complex formed at the HMDE surface as an intermediate in the reduction of Cu(II)-GHG to Cu(O)amalgam.     

Electrochemical determination of paraquat using a DNA-modified carbon ionic liquid electrode

Deoxyribonucleic acid (DNA) was electrochemically deposited on a carbon ionic liquid electrode to give a biosensor with excellent redox activity towards paraquat as shown by cyclic voltammetry and differential pulse voltammetry. Experimental conditions were optimized with respect to sensing paraquat by varying the electrochemical parameters, solution pH, and accumulation time of DNA. Under the optimized conditions, a linear relation exists between the reduction peak current and the concentration of paraquat in the range from 5?×?10^?8 mol L^?1 to 7?×?10^?5 mol L^?1, with a detection limit of 3.6?×?10^?9 mol L^?1. The utility of the method is illustrated by successful analysis of paraquat in spiked real water samples.

Determination of α‐Lipoic acid on a Pyrolytic Graphite Electrode Modified with Cobalt Phthalocyanine

In this work voltammetric techniques were explored for quantification of α‐Lipoic acid (ALA) using a pyrolytic graphite electrode modified with cobalt phthalocyanine. Cyclic voltammograms recorded in phosphate buffer solution containing 1×10^?3 mol L^?1 of ALA presented an oxidation peak located at +0.8 V vs. SCE. The modification of the electrode produced a 100 mV shift of the onset oxidation potential to less positive value and a substantial increase in the ALA oxidation current. Among the voltammetric techniques explored, differential pulse voltammetry showed the best performance for quantifications of the analyte in low concentrations. Limits of detection and quantification of ALA obtained corresponds to 3.4×10^?9 mol L^?1 and 1.2×10^?8 mol L^?1, respectively.     

Extending the dynamic range of copper determination in differential pulse adsorption cathodic stripping voltammetry using wavelet neural network

A wavelet neural network (WNN) model is proposed for extending the dynamic range of Cu(II) determination by differential pulse adsorption cathodic stripping voltammetry (DP-AdSV) using xylenol orange (XO) as a suitable ligand. All of voltammograms data consisting of Cu(II) and Cu(II)–XO peak currents were used in WNN model. The WNN model consisted of three layers (2-8-1) with the Morlet mother wavelet transfer function in the hidden layer. The model was able to extend the dynamic range of Cu(II) from its narrow linear range (1–50 ng ml⁻¹) to the higher dynamic range (1–1500 ng ml⁻¹). The results of the WNN model was also compared with artificial neural network (ANN) model and it was demonstrated the superiority of the WNN model relative to ANN model.