Multilayer structured carbon nanotubes/poly-l-lysine/laccase composite cathode for glucose/O2 biofuel cell

Multilayer film of laccase, poly-l-lysine (PLL) and multi-walled carbon nanotubes (MWNTs) were prepared by a layer-by-layer self-assembly technique. The results of the UV–vis spectroscopy and scanning electron microscopy studies demonstrated a uniform growth of the multilayer. The catalytic behavior of the modified electrode was investigated. The (MWNTs/PLL/laccase)_n multilayer modified electrode catalyzed four-electron reduction of O₂ to water, without any mediator. The possible application of the laccase-catalyzed O₂ reduction at the (MWNTs/PLL/laccase)_n multilayer modified ITO electrode was illustrated by constructing a glucose/O₂ biofuel cell with the (MWNTs/thionine/AuNPs)₈ GDH film modified ITO electrode as a bioanode and the (MWNTs/PLL/laccase)₁₅ film modified ITO electrode as a biocathode. The open-circuit voltage reached to 700 mV, and the maximum power density achieved 329 μW cm⁻² at 470 mV of the cell voltage.     

Electrodeposition of gold nanoparticles at a solid|ionic liquid|aqueous electrolyte three-phase junction

Gold nanoparticles have been electrodeposited on an electrode through electrogeneration at an ITO|AuCl₄^? solution in an ionic liquid|aqueous electrolyte three-phase junction. The electrodeposition was carried out by inverted double-pulse potential chronoamperometry. The direct reduction of AuCl₄^? ions at the electrode is followed by a counterion transfer through the liquid|liquid interface. Contrary to the electrodeposition from a single ionic liquid phase, scanning electron microscopy reveals that the shape of the resulting nanoparticles is highly angular and well-developed with a diameter of 110 ± 30 nm. Catalytic oxidation of glucose on the modified electrode is demonstrated.     

Thin solid state reference electrodes for use in solid polymer electrolytes

This paper reports two low-profile (~ 10 μm thick) solid state reference electrodes for use in solid polymer electrolytes. The thin, open geometry of the electrodes enables close positioning between the working and counter electrodes. The first electrode uses the palladium hydride (Pd|PdH_x) couple (PHRE), and the second utilises the hydrous iridium oxide (IrO_x·yH₂O|IrO_a·bH₂O) couple (IORE). To our knowledge this is the first use of the latter as a reference electrode. The PHRE had a stable potential of + 70 mV vs RHE with a 4 mV h^− 1 drift and two hour lifetime, whilst the IORE gave a potential of + 847 mV vs RHE with a drift of 0.3 mV h^− 1 and no deterioration after 24 h of use. The use of these reference electrodes in a three-electrode solid state cell and a fuel cell is demonstrated.     

Quasi-reversible two-electron reduction of oxygen at gold electrodes modified with a self-assembled submonolayer of cysteine

The electrochemical reduction of molecular oxygen (O₂) has been performed at gold electrodes modified with a submonolayer of a self-assembly (sub-SAM/Au) of a thiol compound (typically cysteine (CYST)) in O₂-saturated 0.5 M KOH. At bare gold electrode O₂ reduction reaction proceeds irreversibly, while this reaction is totally hindered at gold electrodes with a compact structure of CYST over its surface. The partial reductive desorption of the compact CYST monolayer was achieved by controlling the potential of the CYST/Au electrode, leading to the formation of a submonolayer coverage of the thiol compound over the Au electrode surface (sub-SAM/Au), at which the CYST molecules selectively block the Au(1 0 0) and Au(1 1 0) fractions (the so-called rough domains) of the polycrystalline Au while the Au(1 1 1) component (the so-called smooth domains) remains bare (i.e., uncovered with CYST). This sub-SAM/Au electrode extraordinarily exhibits a quasi-reversible two-electron reduction of molecular oxygen (O₂) in alkaline medium with a peak separation (ΔE_p) between the cathodic and anodic peak potentials (E_p^c,E_p^a) of about 60 mV. The ratio of the anodic current to the cathodic one is close to unity. The formal potential (E^o′) of this reaction is found to equal −150 mV vs. Ag/AgCl/KCl(sat.).     

A sensitivity-controlled hydrogen peroxide sensor based on self-assembled Prussian Blue modified electrode

In this communication, a hydrogen peroxide (H₂O₂) sensor based on self-assembled Prussian Blue (PB) modified electrode was reported. Thin film of PB was deposited on the electrode by self-assembly process including multiple sequential adsorption of ferric ions and hexacyanoferrate ions. The as-prepared PB modified electrode displayed sufficient stability for practical sensing application. At an applied potential of ?0.05 V vs. Ag/AgCl (sat. KCl), PB modified electrode with 30 layers exhibited a linear dependence on H₂O₂ concentration in the range of 1 × 10^?6–4 × 10^?4 M (r = 0.9998) with a sensitivity of 625 mA M^?1 cm^?2. It was found that the sensitivity of H₂O₂ sensors could be well controlled by adjusting the number of deposition cycles for PB preparation. This work demonstrates the feasibility of self-assembled PB modified electrode in sensing application, and provides an effective approach to control the sensitivity of PB-based amperometric biosensors.     

Structural and electrochemical properties of a porous nanostructured SnO2 film electrode for lithium-ion batteries

A B₂O₃-doped SnO₂ thin film was prepared by a novel experimental procedure combining the electrodeposition and the hydrothermal treatment, and its structure and electrochemical properties were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, energy dispersive X-ray (EDX) spectroscopy and galvanostatic charge–discharge tests. It was found that the as-prepared modified SnO₂ film shows a porous network structure with large specific surface area and high crystallinity. The results of electrochemical tests showed that the modified SnO₂ electrode presents the largest reversible capacity of 676 mAh g^?1 at the fourth cycle, close to the theoretical capacity of SnO₂ (790 mAh g^?1); and it still delivers a reversible Li storage capacity of 524 mAh g^?1 after 50 cycles. The reasons that the modified SnO₂ film electrode shows excellent electrochemical properties were also discussed.     

Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

Electrochemical synthesis of a ferrocenecarboxylic acid–C60 composite and its electrocatalysis to hydrogen peroxide

A new ferrocenecarboxylic acid–C₆₀ composite (Fc–C₆₀) has been synthesized by controlled potential electrolysis. A composite modified glassy carbon electrode has been prepared based on its good electrochemical activity. The modified electrode in 0.1 M NaClO₄ solution shows a reversible oxidation wave at E_1/2 = 0.32 V (vs. SCE) attributed to the oxidation of the ferrocene entity and a quasi-reversible reduction wave of C₆₀ entity at E_1/2 = ?0.54 V (vs. SCE). Electrocatalytic studies show that Fc–C₆₀ at the modified electrode can mediate the reduction of hydrogen peroxide (H₂O₂), and a broad linear range from 1.2 μM to 21.9 mM for H₂O₂ were obtained with a determination limit of 2.5 × 10^?7 M by amperometry.     

The electrochemical properties of thermophilic cytochrome P450 CYP119A2 at extremely high temperatures in poly(ethylene oxide)

The electrochemical measurements were carried out by using thermophilic cytochrome P450 CYP119A2 (P450st) modified with poly(ethylene oxide) (PEO) in PEO₂₀₀ as an electrochemical solvent. The PEO modified P450st gave clear reduction–oxidation peaks by cyclic voltammetry in oxygen-free PEO₂₀₀ up to 120 °C. The midpoint potential measured for the P450st was −120 mV vs. [Fe(CN)₆]⁴⁻/[Fe(CN)₆]³⁻ at 120 °C. The peak separation, ΔE, was 16 mV at 100 mV/s. The estimated electron transfer rate of PEO-P450st at 120 °C was 35.1 s⁻¹. The faster electron transfer reaction was achieved at higher temperatures. The electrochemical reduction of dioxygen was observed at 115 °C with the PEO-modified P450st system.     

Electroreduction of O2 at a mediated Melanocarpus albomyces laccase cathode in a physiological buffer

We report on oxygen reduction in a physiological buffer solution (0.05 M phosphate buffer containing dissolved O₂, 0.1 M NaCl, pH 7.4, 37 °C) by Melanocarpus albomyces laccase, co-immobilized with [Os(2,2’-bipyridine)₂(polyvinylimidazole)₁₀Cl]^+/2+ as a mediator, on glassy carbon electrodes. Such oxygen cathodes yielded current densities of 3.8 mA cm⁻² at 0.2 V vs. Ag/AgCl, the largest current density reported to date for a mediated laccase cathode in physiological buffer solutions, showing promise for development of biocatalytic fuel cell prototypes.     

A binder-free thin film anode composed of Co2 +-intercalated buserite grown on carbon cloth for oxygen evolution reaction

We present a binder-free catalytic anode for highly efficient and stable oxygen evolution reaction in alkaline media. The catalyst consists of a thin film of buserite-type layered manganese dioxide (MnO₂) intercalated with Co^2 + ions, resulting from electrodeposition of the layered MnO₂ film with tetrabutylammonium (Bu₄N⁺) ions on a carbon cloth, followed by ion-exchange of the initially incorporated Bu₄N⁺ with Co^2 + in solution. The electrode is capable to produce a current density of 10 mA cm^− 2 at an overpotential (η) of 377 mV with a Tafel slope of 48 mV dec^− 1, much superior to the layered MnO₂ without Co^2 +.     

Influence of particle size on the photoactivity of Ti/TiO2 thin film electrodes,and enhanced photoelectrocatalytic degradation of indigo carmine dye

Photoanodes based on Ti/TiO₂ thin films were prepared by the sol–gel method, using either tetraisopropoxide (Ti(OPri)₄) or modified tetraisopropoxide, producing electrodes with different sized nanoparticle coatings, termed nanoporous (20 nm) or nanoparticulated (10 nm) electrodes. The anatase form dominated the composition of the nanoparticulated electrode, which presented a higher surface area, a flat band potential shift of ?160 mV and a 50% improvement in photoactivity, compared to the nanoporous electrode. 100% color removal, and 75% mineralization, of indigo carmine dye were achieved after 15 min of photoelectrocatalytic treatment using a nanoparticulated Ti/TiO₂ electrode operated at a current density of 0.4 mA cm^?2. Our findings indicate that the use of nanoparticulated electrodes, under UV irradiation and with controlled current density, is an efficient alternative for the removal of food dye contaminants during wastewater treatment.     

Novel poly (neutral red) nanowires as a sensitive electrochemical biosensing platform for hydrogen peroxide determination

Poly (neutral red) nanowires (PNRNWs) have been synthesized for the first time by the method of cyclic voltammetric electrodeposition using porous anodic aluminum oxide (AAO) template and were examined by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Moreover, horseradish peroxidase (HRP) was encapsulated in situ in PNRNWs (denoted as PNRNWs–HRP) by electrochemical copolymerization for potential biosensor applications. The PNRNWs showed excellent efficiency of electron transfer between the HRP and the glassy carbon (GC) electrode for the reduction of H₂O₂ and the PNRNWs–HRP modified GC electrode showed to be excellent amperometric sensors for H₂O₂ at −0.1 V with a linear response range of 1 μM to 8 mM with a correlation coefficient of 0.996. The detection limit (S/N = 3) and the response time were determined to be 1 μM and <5 s and the high sensitivity is up to 318 μA mM⁻¹ cm⁻².     

One-step fabrication of chitosan–hematite nanotubes composite film and its biosensing for hydrogen peroxide

This work reports on a novel chitosan–hematite nanotubes composite film on a gold foil by a simple one-step electrodeposition method. The hybrid chitosan–hematite nanotubes (Chi–HeNTs) film exhibits strong electrocatalytic reduction activity for H₂O₂. Interestingly, two electrocatalytic reduction peaks are observed at −0.24 and −0.56 V (vs SCE), respectively, one controlled by surface wave and the other controlled by diffusion process. The Chi–HeNTs/Au electrode shows a linear response to H₂O₂ concentration ranging from 1 × 10⁻⁶ to 1.6 × 10⁻⁵ mol L⁻¹ with a detection limit of 5 × 10⁻⁸ mol L⁻¹ and a sensitivity as high as 1859 μA μM⁻¹ cm⁻².     

Electrochemistry of Actinides and Selected Fission Products in the Head End of Spent Nuclear Fuel Reprocessing

The data on the uranium metal corrosion rate in the solutions of nitric acid (0,1 – 4 M) and effect of complex forming agents on uranium corrosion properties are presented. The increase of HNO₃ concentration caused the shift of corrosion potential from 38 mV to 446 mV and the increase of the corrosion rate from 0,02 to 0,62 mg.cm^-2h^-1. Transpassivation potential of U metal was found weakly effected by HNO₃ concentration varying from 448 to 470 mV/Ag/AgCl. The addition of HCOOH to the electrolytes containing less than 3 M HNO₃ found to shift the values of corrosion potentials about 500 mV towards negative direction reducing the passivation of U metal. The data on the kinetics of oxidative dissolution of PuO₂ using Ag(II) and Am(VI,V) as mediators and the effect of the mediator generation techniques are discussed. The electrochemical properties of UC in the solutions 2 – 4 M HNO₃, results of the quantitative determination of “oxidizable carbon” in dissolver solutions are presented. The results of corrosion and dissolution studies of Tc metal and Tc - Ru alloys containing from 19 to 70 at.% Ru in 0.5 0– 6 M HNO3 indicate the formation of passive films of Tc(IV) – Ru(III,IV) hydroxides at the electrode surface in the solutions containing less than 2 M HNO₃ at the potentials less than 650 mV/Ag/AgCl. The increase of HNO3 concentration to values exceeding 3 M and the shift of the electrode potential towards positive direction causes the transition of the Tc and Tc-Ru alloys to transpassive state. The values of transpassivation potentials increase with the increasing with HNO₃ concentration. Quantitative dissolution of Tc metal without application of oxidation potential becomes possible in the electrolytes, containing more than 4 M HNO₃. The rate of Tc – Ru alloys dissolution is noticed to slow down with the increase of Ru content in the alloy.     

A molecular wire modified glassy carbon electrode for achieving direct electron transfer to native glucose oxidase

Here we describe a strategy for achieving direct electron transfer to native glucose oxidase (GOx), an enzyme in which the redox active centre is buried deep within the glycoprotein. To achieve this a glassy carbon electrode is modified with a mixed monolayer of 4-carboxyphenyl and a 20 Å long oligo(phenylethynyl) molecular wire (MW), assembled from the respective aryl diazonium salts. Subsequently GOx is adsorbed to the interface, followed by covalent attachment. The redox chemistry of the active centre of glucose oxidase, flavin adenine dinucleotide, was observed at an E_1/2 of –443 mV (vs. Ag|AgCl). The enzyme was shown to retain its activity. Most importantly, in the absence of oxygen the electrode was still able to biocatalytically turn over glucose at −400 mV, thereby demonstrating that the enzyme was being recycled back to its catalytically active oxidized form from its inactive reduced form. The rate of enzyme turnover was 1.1 s⁻¹.     

Impedance study on the correlation between phase transition and electrochemical degradation of Si-based materials

In order to explain the relationship between physical change and electrochemical degradation of Co–Co₃O₄ coated Si, impedance spectroscopy on Co–Co₃O₄ coated Si was conducted at various states during charge or discharge. Nyquist plots during Li⁺ insertion (charge) showed a unique behavior that below 70 mV vs. Li/Li⁺, the more Li⁺’s were inserted into the electrode, the larger its comprehensive resistance was getting. During Li⁺ extraction (discharge), electrode resistance was decreased after going through 0.43 V vs Li/Li⁺. When these data were fitted with the ordinary equivalent circuit which is composed of electrolyte resistance, charge transfer resistance and contact resistance, there was an abrupt augmentation of charge transfer resistance below 70 mV vs. Li/Li⁺ during charge, whereas there was its drastic diminishment between 0.2 and 0.5 V vs. Li/Li⁺ during discharge. Because these potential regions are each related to amorphous Li_xSi-to-Li₁₅Si₄ transition and vice versa, it could be shown that the formation and decomposition of Li₁₅Si₄ is responsible for the electrochemical degradation of Co–Co₃O₄ coated Si.     

Electrodeposition of CuInSe2 films by an alternating double-potentiostatic method using nearly neutral electrolytes

One step electrodeposition with an alternating double-potentiostatic(DPSED) program was used to prepare CuInSe₂ thin films in nearly neutral aqueous electrolytes with sodium citrate complex. Linear sweep voltammetry(LSV) was measured to probe voltammetric properties of electrolytes with respect to Cu, In and Se individual precursor and their mixed solutions. Compositional and structural characteristics of the as-deposited and annealed films at 400 °C in Ar atmosphere for 0.5 h were analyzed by XRD and XPS. The results showed that reduction of Cu²⁺ to Cu⁺ at one potential point of ?800 mV and subsequently formation of CuIn alloy as well as metal In and amorphous Se at the other potential point of ?1400 mV were responsible for synthesis of CISe chalcopyrite. Composition self-regulation made DPSED films have three elements co-deposition and more uniform element distribution, which promoted chalcopyrite CISe formation.     

Electrodeposition of cobalt-sulfide nanosheets film as an efficient electrocatalyst for oxygen evolution reaction

In this communication, we report the development of cobalt-sulfide nanosheets film on Ti mesh (Co-S/Ti mesh) via electrodeposition as a novel oxygen evolution anode in basic media. Electrochemical experiments suggest that this Co-S/Ti mesh electrode exhibits high catalytic activity and good stability. It needs overpotential of 361 mV to drive current density of 10 mA cm^− 2 and its catalytic activity is maintained for at least 20 h.     

Visible light photocatalysis by a Titania–Rhodium(III) complex

Titania hybrid photocatalysts containing 0.5, 1.0, 2.0, and 5.0 wt% of rhodium(III) were prepared by chemisorption of RhCl₃ × 3H₂O onto anatase hydrate powder (TH). Analytical data suggest that a titania–trichlororhodate complex is produced containing a [TiO₂]–O–Rh bond.Similar results are found in the case of modification by RhBr₃ × 3H₂O. Diffuse reflectance spectra exhibit an absorption shoulder throughout the visible region down to 700 nm. Photoelectrochemical measurements indicate that the quasi-Fermi level of electrons is gradually shifted to more anodic potentials with increasing rhodium loading reaching a value of ?0.34 V at pH 7 (vs. NHE) in the case of 5.0%RhCl₃/TH. This is more anodic by 210 mV as compared to unmodified TH. Upon visible light irradiation this photocatalyst induces a fast mineralization of 4-chlorophenol whereas cyanuric acid, which is known to be mineralized in the presence of the analogous Pt(IV) modified titania, is not degraded.