New chloro and triphenylsiloxy derivatives of dioxomolybdenum(VI) chelated with pyrazolylpyridine ligands: Catalytic applications in olefin epoxidation

Dioxomolybdenum(VI) complexes of general formula [MoO₂X₂L₂] (X = Cl, OSiPh₃; L₂ = 2-(1-butyl-3-pyrazolyl)pyridine, ethyl[3-(2-pyridyl)-1-pyrazolyl]acetate) were prepared and characterised by ¹H NMR, IR and Raman spectroscopy. The assignment of the vibrational spectra was supported by ab initio calculations. A single crystal X-ray diffraction study of the complex [MoO₂Cl₂{ethyl[3-(2-pyridyl)-1-pyrazolyl]acetate}] showed that the compound is monomeric and crystallises in the tetragonal system with space group P4₁. The four complexes are active and selective catalysts for the liquid-phase epoxidation of olefins by tert-butylhydroperoxide. Selectivities to the corresponding epoxides were mostly 100% (for conversions of at least 34%) for the substrates cyclooctene, cyclododecene, 1-octene, trans-2-octene and (R)-(+)-limonene. For styrene epoxidation, the corresponding diol was also formed in significant quantities. The turnover frequencies for cyclooctene epoxidation at 55 °C were around 340 mol mol_Mo⁻¹ h⁻¹ for the chloro complexes and 160 mol mol_Mo⁻¹ h⁻¹ for the triphenylsiloxy complexes. The addition of co-solvents (1,2-dichloroethane or n-hexane) had a detrimental effect on catalytic activities. Kinetic studies for the two complexes bearing the ligand ethyl[3-(2-pyridyl)-1-pyrazolyl]acetate revealed an apparent first order dependence of the initial rate of cyclooctene conversion with respect to cyclooctene or oxidant concentration.     

Biological study and electrochemical characterization of Cu(II) and 1,8-bis-(2-pyridyl)-3,6-dithiaoctane (pdto) complex

Preliminary proliferation assays in human tumor cervix line HeLa, using the coordination compound [Cu(pdto)H₂O]²⁺ (pdto = 1,8-bis-(2-pyridyl)-3,6-dithiaoctane) and its precursors Cu(NO₃)₂ · 2.5H₂O and pdto, were carried out. The results showed that the copper complex has a behavior similar to that of the reference drug cis-platin. No biological activity for the non-coordinated ligand and the copper salt was found. It was established by cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy, that the complex [Cu(pdto)H₂O]²⁺ presents an electrochemical reversible Cu(II)/Cu(I) reduction, in acetonitrile solution, meanwhile, the copper salt Cu(NO₃)₂ · 2.5H₂O exhibited an electrochemical irreversible behavior. A comparison between biological and electrochemical results corresponding to [Cu(pdto)H₂O]²⁺ and Cu(NO₃)₂ · 2.5H₂O let us to proposed, the electrochemical reversibility, as one important factor in the antitumoral activity of the copper complex. Due to the nature of the studies presented in this work, other factors like intercalation properties with DNA cannot be neglected in the antitumoral activity of the complex.     

Crystal structure and ionic conductivity of AgCr2(PO4)(P2O7)

Single crystals of a new phosphate AgCr₂(PO₄)(P₂O₇) have been prepared by the flux method and its structural and the infrared spectrum have been investigated. This compound crystallizes in the monoclinic system with the space group C2/c and the parameters are, a = 11.493 (3) Å, b = 8.486 (3) Å, c = 8.791 (2) Å, β = 114.56 (2)°, V = 779.8 (3) ųand Z = 4. Its structure consists of CrO₆ octahedra sharing corners with P₂O₇ units to form undulating chains extending infinitely along the [110] direction. These chains are connected by the phosphate tetrahedra giving rise to a 3D framework with six-sided tunnels parallel to the [101] direction, where the Ag⁺ ions are located. The infrared spectrum of this compound was interpreted on the basis of P₂O₇^4? and PO₄^3? vibrations. The appearance of ν_sP–O–P in the spectrum suggests a bent P–O–P bridge for the P₂O₇^4? ions in the compound, which is in agreement with the X-ray data. The electrical measurements allow us to obtain the activation energy of (1.36 eV) and the conductivity measurements suggest that the charge carriers through the structure are the silver captions.     

Solubility of CO2 in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]⁺) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF₆]^?), trifluoromethanesulfonate ([OTf]^?), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]^?) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky–Kasarnovsky equation and Henry’s law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO₂ in the ILs studied follows the same behaviour as the corresponding conventional 1-ethyl-3-methylimidazolium ([emim]⁺) based ILs with the same anions, i.e. [hemim][NTf₂] > [hemim][OTf] > [hemim][PF₆] > [hemim][BF₄].     

A general route for the stereoselective synthesis of (E)-(1-propenyl)phenyl esters by catalytic CC bond isomerization

A general and efficient procedure for the stereoselective synthesis of (E)-(1-propenyl)phenyl esters from readily accessible allylphenols has been developed. The process involves a two-step sequence consisting of the initial acylation of the allylphenols with an acid chloride, followed by catalytic CC bond isomerization in the resulting allylphenyl esters. The latter step was performed in methanol at 80 °C using catalytic amounts (0.5 mol %) of the commercially available bis(allyl)-ruthenium(IV) dimer [{RuCl(μ-Cl)(η³:η³-C₁₀H₁₆)}₂] (C₁₀H₁₆=2,7-dimethylocta-2,6-diene-1,8-diyl). Reactions proceeded in high yields (68–93%) and short times (4–9 h) with complete E-selectivity.     

Synthesis,spectroscopic studies and structures of square-planar nickel(II) and copper(II) complexes derived from 2-{(Z)-[furan-2-ylmethyl]imino]methyl}-6-methoxyphenol

Two new nickel(II) [Ni(L)₂] and copper(II) [Cu(L)₂] complexes have been synthesized with bidentate NO donor Schiff base ligand (2-{(Z)-[furan-2-ylmethyl]imino]methyl}-6-methoxyphenol) (HL) and both complexes Ni(L)₂ and Cu(L)₂ have been characterized by elemental analyses, IR, UV–vis, ¹H, ¹³C NMR, mass spectroscopy and room temperature magnetic susceptibility measurement. The tautomeric equilibria (phenol-imine, O–H?N and keto-amine, O?H–N forms) have been systemetically studied by using UV–vis absorption spectra for the ligand HL. The UV–vis spectra of this ligand HL were recorded and commented in polar, non-polar, acidic and basic media. The crystal structures of these complexes have also been determined by using X-ray crystallographic techniques. The complexes Ni(L)₂ and Cu(L)₂ crystallize in the monoclinic space group P2₁/n and P2₁/c with unit cell parameters: a = 10.4552(3) Å and 12.1667(4) Å, b = 8.0121(3) Å and 10.4792(3) Å, c = 13.9625(4) Å and 129.6616(3)Å, V = 1155.22(6) Å³ and 1155.22(6) Å³, D_x = 1.493 and 1.476 g cm^?3 and Z = 2 and 2, respectively. The crystal structures were solved by direct methods and refined by full-matrix least squares to a find R = 0.0377 and 0.0336 of for 2340 and 2402 observed reflections, respectively.     

Doping effect of nonmagnetic impurity on the spin-Peierls-like transition in the quasi-one-dimensional (quasi-1D) spin system of 1-(4′-nitrobenzyl)pyridinium bis(maleonitriledithiolato)nickelate

A nonmagnetic compound, [NO₂BzPy][Cu(mnt)₂] (mnt^2? = maleonitriledithiolate; NO₂BzPy⁺ = 1-(4′-nitrobenzyl)pyridinium), is isostructural with [NO₂BzPy][Ni(mnt)₂], which is a quasi-1D spin system and exhibits a spin-Peierls-like transition with J = 192 K in the gapless state and spin energy gap = 738 K in the dimerization state, respectively. Further, five nonmagnetic impurity doped compounds [NO₂BzPy][Cu_xNi_1?x(mnt)₂] (x = 0.04–0.74) were prepared, and their crystal structures as well as magnetic properties were investigated. The nonmagnetic doping causes the suppression of the spin transition with an average rate of 139(13) K/percentage of dopant concentration, and the transition collapse is estimated at around x > 0.5.     

Spin-crossover in dimeric hydrogen-bonded iron(II) 2-(pyrazolyl)-pyridine and 2-(imidazolyl)-pyridine complexes

Five new hydrogen-bonded solvated iron(II) complexes of pyrazolyl- and imidazolyl-based N,N-chelating ligands have been synthesised. Water to ligand-NH hydrogen-bonded bridges occur in the pseudo-dimeric complexes {cis-[Fe(pypzH)₂(NCX)₂]₂(μ-OH₂)(H₂O)₂} · H₂O · MeOH (where X = S or Se), and in the chain complex {cis-[Fe(pypzH)₂(NCS)₂](μ-OH₂)}_n. A “half” spin-crossover (T_c = 125 K) was observed in the dimeric X = Se complex by means of magnetic measurements and no thermal hysteresis occurred between 4 and 300 K. The crystal structure at 123 K showed Fe–N distances consistent with the magnetism. Each Fe in the dimeric unit was structurally equivalent in the HS–LS state. Removal of the solvate molecules led to HS–HS behaviour over the temperature range 4–300 K. The pseudo-dimer with X = S also showed HS–HS behaviour as did the monomeric analogue cis-[Fe(pypzH)₂(NCS)₂]H₂O and a structurally different methanol-bridged dimer {cis-[Fe(pyimH)₂(NCS)₂]₂(μ-MeOH)₂} · 2MeOH (pypzH = 2-(1H-pyrazol-3-yl)-pyridine; pyimH = 2-(1H-imidazol-2-yl)-pyridine).     

Two novel Keggin tungstocobaltates grafted by cobaltII complex group(s): K[Co(phen)2(H2O)]2[HCoW12O40]·2H2O and [Co(2,2′-bipy)3]1.5{[Co(2,2′-bipy)2(H2O)][HCoW12O40]}·0.5H2O

Two novel inorganic–organic hybrid compounds composed of Keggin tungstocobaltate framework and cobalt(II)–N coordination complexes, K[Co(phen)₂(H₂O)]₂[HCoW₁₂O₄₀]·2H₂O (1) (phen = 1,10-phenanthroline) and [Co(2,2′-bipy)₃]_1.5{[Co(2,2′-bipy)₂(H₂O)][HCoW₁₂O₄₀]·0.5H₂O (2) (bipy = bipyridine), have been synthesized under hydrothermal conditions by directly using Keggin POMs as starting materials, which were characterized by elemental analyses, IR, TG analyses and X-ray single crystal diffraction. Crystal data for compound 1: C₄₈H₄₁Co₃KN₈O₄₄W_12, triclinic, space group P-1, a = 10.918(5) Å, b = 13.401(5) Å, c = 13.693(5) Å, α = 69.291(5)°, β = 71.568(5)°, γ = 78.421(5)°, V = 1768.9(12) Å³, Z = 1; for compound 2: C₁₃₀H₁₀₄Co₇N₂₆O₈₃W_24, orthorhombic, space group, C2/c, a = 46.839(9) Å, b = 14.347(3) Å, c = 26.147(5) Å, α = β = γ = 90°, V = 17,570(6) Å³, Z = 4. Compound 1 exhibits a pseudo-1D chainlike structure, in which potassium ions act as linkages of Keggin unit doubly grafted by [Co(phen)₂(H₂O)] complex. Compound 2 represents a [Co(2,2′-bipy)₂(H₂O)]²⁺ mono-grafted Keggin tungstocobaltate derivative with 1.5[Co(2,2′-bipy)₃]²⁺ countercations. The cyclic voltammetric behavior of 1-CPE is similar to the parent 3-CPE, but the cyclic voltammetric behavior of Co^II shows a little difference. Variable-temperature magnetic susceptibility measurement of compound 1 demonstrates the presence of antiferromagnetic interactions.     

Activation process of 3-alkyl-substituted ansa-bis(indenyl) zirconocenes by MAO

The ansa-indene compound {1-Me₂Si(3-C₉H₆Et)₂} (1) was prepared by alkylation of the unsubstituted ansa-indene. This compound was converted, by reaction with nBuLi, to the dilithium compound [Li₂{1-Me₂Si(3-C₉H₅Et)₂}] (2). ansa-Zirconocene [Zr{1-Me₂Si(3-η⁵-C₉H₅Et)₂}Cl₂] (3) was prepared by the reaction of ZrCl₄ with 2 in ether/toluene at −78 °C. The molecular structure of meso-3 was determined by single crystal X-ray diffraction studies. The ansa-zirconocene 3 exhibits a greater activity in ethylene polymerization than reference complexes such as [Zr{1-Me₂Si(η⁵-C₉H₆)₂}Cl₂] and [Zr{1-C₂H₄(η⁵-C₉H₅)₂}Cl₂] and, in addition, it maintained a reasonable level of activity after 12 h of contact with MAO solution. Furthermore, the different elementary steps in the activation process of ethylene polymerization for substituted complexes [Zr{1-Me₂Si(3-η⁵-C₉H₅R)₂}Cl₂] (R = Et 3, Me 4, nPr 5 and nBu 6) by commercial methylaluminoxane (MAO) have been studied by UV–vis spectroscopy. Addition of MAO in large excess ([Al]/[Zr] = 2000) at −78 °C yields a previously unreported intermediate in the activation process of metallocenes; this intermediate has an absorption band centered at λ = 639 nm. We report here the influence of the type of catalyst, ring substitution, type of cocatalyst and addition of THF on the activation process of these metallocenes.     

Solvothermal synthesis and crystal structure of the Mo(VI)-bridged helical chain containing Mo2(V) dimers: (C4H12N2)2[(MoV2O4)(MoVIO4)(C2O4)2]·2H2O

A new molybdenum complex (C₄H₁₂N₂)₂[(Mo^V₂O₄)(Mo^VIO₄)(C₂O₄)₂]·2H₂O, was solvothermally synthesized and characterized by single-crystal X-ray diffraction. The structure of the compound consists of oxalate acid-coordinated mixed-valent [Mo^V₂O₄][Mo^VIO₄] helical chains and protonated piperazine cations. The helical chains are built up from the [Mo^V₂O₄] units and [Mo^VIO₄] tetrahedral. The central axis about helical chain is a 2-fold screw axis. The compound crystallizes in the space group P2₁/n of monoclinic system with a = 11.396(2) Å, b = 14.107(3) Å, c = 15.805(3) Å, β = 102.09(3)°, V = 2484.6(9) Å³, Z = 4. Other characterizations by elemental analysis, IR, and thermal analysis for this compound are also given.     

Synthesis and catalytic properties of cationic palladium(II) and rhodium(I) complexes bearing diphosphinidinecyclobutene ligands

Cationic palladium(II) and rhodium(I) complexes bearing 1,2-diaryl-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene ligands (DPCB–Y) were prepared and their structures and catalytic activity were examined (aryl = phenyl (DPCB), 4-methoxyphenyl (DPCB–OMe), 4-(trifluoromethyl)phenyl (DPCB–CF₃)). The palladium complexes [Pd(MeCN)₂(DPCB–Y)]X₂ (X = OTf, BF₄, BAr₄ (Ar = 3,5-bis(trifluoromethyl)phenyl)) were prepared by the reactions of DPCB–Y with [Pd(MeCN)₄]X₂, which were generated from Pd(OAc)₂ and HX in MeCN. On the other hand, the rhodium complexes [Rh(MeCN)₂(DPCB–Y)]OTf were prepared by the treatment of [Rh(μ-Cl)(cyclooctene)₂]₂ with DPCB–Y in CH₂Cl₂, followed by treatment with AgOTf in the presence of MeCN. The cationic complexes catalyzed conjugate addition of benzyl carbamate to α,β-unsaturated ketones.     

Thermal reactivity of cis- and trans-bis(triphenylgermyl)bis(tertiary phosphine)platinum(II)

The complex cis-Pt(Ph₃Ge)₂(PMe₂Ph)₂ underwent smooth isomerization to give the trans-isomer at room temperature via an associative five-coordinated intermediate. Thermodynamic parameters and activation energy for the cis to trans isomerization were obtained, ΔH^# = 105 kJ mol⁻¹, ΔS^# = 12.5 J mol⁻¹ K⁻¹, and Ea = 107 kJ mol⁻¹, respectively. Heating of trans-Pt(Ph₃Ge)₂(PMe₂Ph)₂ at 50 °C for 36 days produced trans-PtPh(Ph₃Ge)(PMe₂Ph)₂ followed by the formation of trans-PtPh₂(PMe₂Ph)₂, Pt(PMe₂Ph)₄, and Ph₄Ge finally via elimination of the phenyl group from Ph₃Ge ligand with liberation of the Ph₂Ge unit and subsequent reductive elimination of the remaining Ph₃Ge ligand at 80 °C for 1 month.     

An improved synthesis of 3-[3-(trifluoromethyl)-3H-1,2-diazirin-3-yl]aniline: A key intermediate in the synthesis of photoaffinity probes

An improved synthesis of 3-[3-(trifluoromethyl)-3H-1,2-diazirin-3-yl]aniline, achieving an overall yield of 38% over seven steps is reported. Only three chromatographic separations were needed and the preparation of ～0.7 g of the target compound was demonstrated. The stability of the diazirine in solution at room temperature while exposed to ambient light was studied. No significant degradation of the compound was observed over the course of five weeks in a 130 mM sample and only minor degradation was observed in weaker samples (10, 5, and 2.5 mM), as demonstrated by ¹H and ¹⁹F NMR.     

Carbazole-modified blue light-emitting copolymers with the backbones integrated by diphenyloxadiazole,fluorene, and triphenylamine

Two new blue light-emitting polymers, poly{[2,5-bis(4-phenylene)-1,3,4-oxadiazole]-[9,9-dihexylfluorene-2,7-diyl]-[N-(4-(9H-carbazol-9-yl)phenyl)-N,N-bis(p-phenylene)aniline]} (POFPA) and poly{[2,5-bis(4-phenylene)-1,3,4-oxadiazole]-[9,9-dihexylfluorene-2,7-diyl]-[4-(3,6-(di-9H-carbazol-9-yl)-9H-carbazol-9-yl)-N,N-bis(p-phenylene)-aniline]} (POFCPA), were synthesized by Suzuki coupling reactions. By GPC analysis against a linear polystyrene standard POFPA and POFCPA were found to have M_n of 1.68 × 10⁴ and 3.70 × 10³, respectively. In contrast to POFPA, the main absorption peak of POFCPA in dilute toluene solution was blue-shifted by Δλ = 26 nm owing to its backbone of relatively shorter π-conjugation length and more carbazole units in side chain. The absolute fluorescence quantum yield (Φ_f) of POFCPA in dilute toluene solution was determined as 73%, much higher than that of POFPA (Φ_f ≈ 58.9%) measured under the same conditions. An electroluminescence device based on POFCPA displays a stable blue emission having color coordinates of (0.15, 0.20), a maximum brightness of 4762 cd/m², and a maximum current efficiency of 1.79 cd/A. By using this polymer as the host material doped with 1 wt.% 4,4′-bis[2-(4-(N,N-diphenylamino)phenyl)vinyl]biphenyl, the achieved highest brightness, maximum current efficiency and maximum power efficiency are 13,613 cd/m², 3.38 cd/A, and1.84 lm/W, respectively.     

Phase equilibrium properties of binary aqueous solutions of benzylamine, 1,2-bis(2-aminoethoxy)ethane,or 2-[2-(dimethylamino)ethoxy]ethanol

The vapour pressures of (benzylamine + water), {1,2-bis(2-aminoethoxy)ethane + water}, or {2-[2-(dimethylamino)ethoxy]ethanol + water} binary mixtures, and pure 2-[2-(dimethylamino)ethoxy]ethanol component were measured by means of two static devices at temperatures between (283.15 and 363.15 (or 323.15)) K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The (benzylamine + water) binary mixture exhibits positive deviations in G^E for (303.15 < T/K < 323.15) and a sinusoidal shape in G^E for T > 323.15 K over the whole composition range. The aqueous 1,2-bis(2-aminoethoxy)ethane or {2-[2-(dimethylamino)ethoxy]ethanol + water} solutions exhibit negative deviations in G^E for all investigated temperatures over the whole composition range.     

Cationic palladium(II), platinum(II) and ruthenium(II) complexes containing a chelating difluoro-substituted thiourea ligand

The fluorine substituted thiourea 2,6-F₂C₆H₃C(O)NHC(S)NEt₂ was prepared in good yield from the reaction of 2,6-F₂C₆H₃C(O)Cl with KSCN and Et₂NH in acetone. Using this compound several heteroleptic, monocationic Pd(II), Pt(II) and Ru(II) complexes of the type cis-[M{κ²S,O-2,6-F₂C₆H₃C(O)NC(S)NEt₂}(L)]PF₆ [M = Pt, Pd; L = (Ph₃P)₂, ^tBu₂bipy, 1,10-phen] as well as [Ru(η⁶-p-cym){κ²S,O-2,6-F₂C₆H₃C(O)NC(S)NEt₂}(PPh₃)]PF₆ were prepared in high yields. The compounds were characterised by spectroscopic methods and, in one case, by single crystal X-ray diffraction.     

Ab initio crystal structure of nickel(II) hydroxy-terephthalate by synchrotron powder diffraction and magnetic study

The structure of the new hybrid compound [Ni₃(OH)₂(tp)₂(H₂O)₄]·2H₂O (tp = C₈H₄O₄²⁻) has been determined ab initio from synchrotron powder diffraction data and refined with the Rietveld method: space group P-1, a = 10.2077(6) Å, b = 8.0135(5) Å, c = 6.3337(4) Å, α = 97.70 (1)°, β = 97.21(1)°, γ = 108.77(1)°, D_x = 2.124 g/cm³, Rp = 0.045, R_B = 0.095 (757 independent reflections). H atoms were placed geometrically and their position optimized by DFT calculation. The repeating structural unit is the chain [Ni(1)O₆]₂Ni(2)O₆, consisting of two edges sharing octahedrons related by the symmetry center and linked via μ3-OH to a vertex of Ni(2) octahedron. The Ni(1) coordination is ensured by two oxygen atoms from two water molecules, two OH and two oxygen atoms from carboxylate groups. The linkage of the chains by the tp anions forms infinite layers parallel to the (010) planes. Interchain hydrogen bonds between the water molecules coordinating the metal ensure the cohesion of the 2D structure. The structural and magnetic properties are compared with that of the 3D fumarate-based compound [Ni₃(OH)₂(fum)₂(H₂O)₄]·2H₂O (fum = C₄H₂O₄²⁻).     

Synthesis,characterization and catalytic behaviors of neutral nickel complexes: Arylnickel N-alkyl-6-(1-(arylimino)ethyl)picolinamide

A series of novel neutral nickel complexes, aryl (phenyl or naphthyl) nickel N-alkyl-6-(1-(arylimino)ethyl)picolinamides, were synthesized and characterized by NMR and IR spectroscopy and elemental analysis. Single-crystal X-ray diffraction analyses of the complexes C2, C3 and C7 reveal distorted square-planar geometry along with the molecular structure of one free ligand L1. On activation with diethylaluminum chloride (Et₂AlCl), the nickel complexes exhibited moderate catalytic activities for ethylene oligomerization, and the catalytic activity was up to 2.45 × 10⁵ g mol^?1(Ni) h^?1 in the presence of 1 equiv. PPh₃. Moreover, these complexes also exhibit moderate activities for Kumada–Corriu reaction and polymerization of methyl methacrylate.     

Catalytic effect of CTAB on the interaction of dipeptide glycyl-tyrosine (Gly-Tyr) with ninhydrin

The effect of cationic micelles of cetyltrimethylammonium bromide (CTAB) on the interaction of dipeptide glycyl-tyrosine (Gly-Tyr) with ninhydrin under varying conditions has been studied spectrophotometrically at 70 °C and pH 5.0. The reaction followed first- and fractional-order kinetics with respect to [Gly-Tyr] and [ninhydrin], respectively. Increase in total concentration of CTAB from 0 to 70 × 10⁻³ mol dm⁻³ resulted in an increase in the pseudo-first-order rate constant (k_ψ) by a factor of ca. 3. Quantitative kinetic analysis of k_ψ − [CTAB] data was performed on the basis of pseudo-phase model of the micelles (proposed by Menger and Portnoy and developed by Bunton) and Piszkiewicz model. A possible mechanism has been proposed and the kinetic data have been used to evaluate the micellar binding constants K_S (268 mol⁻¹ dm³ for Gly-Tyr) and K_N (64 mol⁻¹ dm³ for ninhydrin).