Functional multiwalled carbon nanotube nanocomposite with iron picket-fence porphyrin and its electrocatalytic behavior

A kind of nanocomposite with good dispersion in water was prepared through noncovalent adsorption of iron picket-fence porphyrin (FeTMAPP), iron-5,10,15,20-tetrakis[αααα-2-trismethylammoniomethyl-phenyl]porphyrin, on multiwalled carbon nanotubes (MWNTs). UV–visible spectroscopic and electrochemical methods were used to characterize the nanocomposite. A gold nanoparticles/nanocomposite self-assembled monolayer was formed on gold electrode and showed highly synergetic behavior towards the electrocatalytic reduction of O₂ with a decrease of overpotential of 200 mV. FeTMAPP acted as the catalytic active center, and MWNTs increased the amount of FeTMAPP adsorbed and accelerated the electron transfer between FeTMAPP and electrode. The resulting biosensor exhibited good response to oxygen with a linear range from 0.52 to 180 μM and a detection limit of 0.38 μM, without the interference of ascorbic acid and uric acid, which showed an application potential of the proposed nanocomposite and monolayer in detection of dissolved oxygen and oxidase substrates.     

Electrogenerated chemiluminescence aptamer-based biosensor for the determination of cocaine

A novel electrogenerated chemiluminescence aptamer-based (ECL-AB) biosensor for the determination of a small molecule drug is designed employing cocaine-binding aptamer as molecular recognition element for cocaine as a model analyte and ruthenium complex served as an ECL label. A 5′-terminal cocaine-binding aptamer with the ECL label at 3′-terminal of the aptamer was utilized as an ECL probe. The ECL-AB biosensors were fabricated by immobilizing the ECL probe onto a gold electrode surface via thiol-Au interactions. An enhanced ECL signal is generated upon recognition of the target cocaine, attributed to a change in the conformation of the ECL probe from random coil-like configuration on the probe-modified film to three-way junction structure, in close proximity to the sensor interface. The integrated ECL intensity versus the concentration of cocaine was linear in the range from 5.0 × 10⁻⁹ to 3.0 × 10⁻⁷ M. The detection limit was 1.0 × 10⁻⁹ M. This work demonstrates that the combination of a highly binding aptamer to analyte with a highly sensitive ECL technique to design ECL-AB biosensor is a great promising approach for the determination of small molecule drugs.     

Carbon black as successful screen-printed electrode modifier for phenolic compound detection

We report a miniaturized and disposable electrochemical sensor for phenolic compound detection. The sensor was constructed by modifying the working electrode surface of screen-printed electrode (SPE) with carbon black (CB) dispersion. This new probe showed higher sensitivity and better resistance to fouling than the bare SPE, displaying the suitability of CB as an excellent nanomodifier of SPE for phenolic compound detection. Catechol, gallic acid, caffeic acid, and tyrosol were detected by square wave voltammetry with a detection limit of 0.1 μM, 1 μM, 0.8 μM, and 2 μM, respectively. The sensor was able to selectively discriminate the mono-phenols and ortho-diphenols with rapid and easy measurement, paving the way to use a cost-effective device for quality control of foods and beverages containing phenolic compounds.     

Gold nanoparticles integrated in a nanotube array for electrochemical detection of glucose

An enzyme-free amperometric glucose sensor of gold nanoparticle-constituted nanotube array electrode is presented. The resulted gold nanotube array electrode with significantly enhanced surface roughness shows prominent catalytic activity toward the electrooxidation of glucose in a pH 7.4 phosphate buffer (PBS) solution and thus can be used to individually or simultaneously determine glucose and the common interfering molecule of ascorbic acid (AA). In the case of glucose detection, the amperometric responses show a linear relationship to glucose concentration in the range of 1 mM–42.5 mM with a detection limit down to 10 μM. The present non-enzymatic glucose electrochemical biosensor shows a good stability and reproducibility.     

3-D nanoporous gold thin film for the simultaneous electrochemical determination of dopamine and ascorbic acid

In this study, we demonstrated a novel fabrication method of three dimensional nanoporous gold thin film (NPGF) onto gold (Au) substrate using electrochemical deposition method. Scanning electron microscope (SEM) investigation reveals the formation of highly-ordered pores, approximately 30 nm in diameter and 150 nm thick. The NPGF-modified electrode shows a linear range (0.1–40 μM) for dopamine detection in the presence of ascorbic acid. The electrochemical measurements of mixtures of dopamine, ascorbic acid, and uric acid in human serum sample for real sample applications was also investigated based on differential pulse voltammetry (DPV) technique. These high sensitivity and selectivity features of the proposed NPGF biosensor offer great promise for real sample biosensor application.     

CtrA gene based electrochemical DNA sensor for detection of meningitis

Electrochemical DNA sensor has been fabricated by immobilizing thiolated single stranded oligonucleotide (ssDNA) probe onto gold (Au) coated glass electrode for meningitis detection using hybridization with complementary DNA (CtrA) in presence of methylene blue (MB). These electrodes (ssDNA/Au and dsDNA/Au) have been characterized using atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) technique. The DNA/Au electrode can detect the complementary DNA in the range of 7–42 ng/μl in 5 min (hybridization) with response time 60 s and electrode is stable for about 4 months when stored at 4 °C. The sensitivity of dsDNA/Au electrode is 115.8 μA/ng with 0.917 regression coefficient (R).     

Determination of tannic acid by adsorptive anodic stripping voltammetry at porous pseudo-carbon paste electrode

A novel and sensitive electrochemical sensor based on porous pseudo-carbon paste electrode (PPCPE) for tannic acid detection is described. PPCPE is fabricated by mixing calcium carbonate microspheres as the template, graphite powders as the filler, and pyrrole as the precursor of polymer which actually acted as the paste. After the polymerization of pyrrole catalyzed by Fe³⁺, the template calcium carbonate microspheres are removed with 0.1 M hydrochloric acid to form PPCPE. The diameters of these pores are in the range from 2 to 5 μm by SEM observations and the specific surface area of PPCPE is 59.26 m²/g by the Brunauer–Emmet–Teller (BET) method. A linear relationship between the anodic stripping peak current and the concentration of tannic acid from 0.02 to 1 μM and a limit of detection as low as 0.01 μM are obtained using PPCPE.     

Disposable paper-based electrochemical sensor based on stacked gold nanoparticles supported carbon nanotubes for the determination of bisphenol A

This work reports a new type of disposable electrochemical sensor for the determination of bisphenol A (BPA). The working electrodes were fabricated by sputtering gold nanoparticles on commercial art paper and then modifying the gold layer with multi-walled carbon nanotubes (MWCNTs). The electrode in their intermediated and final stage was characterized by atomic force microscope, scanning electron microscope and electrochemical techniques. To perform electrochemical analysis, the resulting electrode was integrated with a homemade paper-based analytical device, which could also ensure the immobilization of MWCNTs on the electrode surface without any functionalization. The determination of BPA was investigated by linear sweep voltammetry (LSV). A wide linearity in the range from 0.2 to 20 mg/L with a detection limit of 0.03 mg/L (S/N = 3) was obtained. The between-sensor reproducibility was 5.7% (n = 8) for 0.5 mg/L BPA. The proposed sensor showed good resistance against interferences and was applied to detect BPA leached from real plastic samples with satisfying results. This disposable sensor is readily mass-produced and has been verified to serve as an attractive alternative to screen-printed electrodes for practical applications.     

A novel nitrogen-doped graphene fiber microelectrode with ultrahigh sensitivity for the detection of dopamine

A novel nitrogen doped graphene fiber (NGF) was fabricated via a simple and facile wet-spinning strategy followed by annealing at high temperature, which can be applied as a remarkable electrode material. The NGF microelectrode shows good sensitivity and selectivity for the detection of dopamine with a wide linear response in the range of 0.1 μM to 80 μM, with the detection limit of 30 nM and an ultrahigh sensitivity of 22.08 μA μM^− 1 cm^− 2. Such high performance enables the NGF to be a prominent material in the branch of electrochemical analysis.     

Electrochemical detection of perchloroethylene using differential pulse voltammetry

We demonstrate the application of differential pulse voltammetry (DPV) for the electrochemical detection of perchloroethylene (PCE) on an unmodified glassy carbon electrode surface. Detection sensitivity was substantially improved using DPV, in which dechlorination was denoted by a cathodic peak observed at approximately − 0.6 V (vs Ag/AgCl). Peak current intensity was found to correlate linearly with concentration over a tested range of 0 to 10 μM. The utility of this technique was subsequently evaluated for PCE-spiked environmental samples containing either Methylobacterium adhaesivum (1 × 10⁶ cells/mL) or creek water (10% v/v). In all environmental samples, a linear dynamic range was also observed from approximately 0 to 10 μM. The limit of detection was determined to be 0.3 μM in blank buffer, 0.4 μM in bacteria-containing samples and 1.2 μM in creek water samples.     

Gold nanoparticles/tetraaminophenyl porphyrin functionalized multiwalled carbon nanotubes nanocomposites modified glassy carbon electrode for the simultaneous determination of p-acetaminophen and p-aminophenol

A novel electrochemical platform was designed and prepared for simultaneous determination of p-acetaminophen (AMP) and p-aminophenol (AP) by combining the excellent conductivity and electrocatalytic activities of tetraaminophenyl porphyrin functionalized multi-walled carbon nanotubes (CNTs-CONH-TAPP) and gold nanoparticles (AuNPs). The as-synthesized CNTs-CONH-TAPP composites were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscope. The incisive oxidation current responses of AMP and AP at the modified electrode promised a sensitive and selective simultaneous determination of AMP and AP. Under optimized conditions, the peak currents were directly proportional to the concentrations of AMP and AP over the ranges of 4.5–500 μmol L⁻¹ and 0.08–60 μmol L⁻¹, respectively, and the limits of detection were 0.44 μmol L⁻¹ for AMP and 0.025 μmol L⁻¹ for AP(S/N = 3) respectively. The proposed modified electrode showed excellent selectivity, reproducibility and long-term stability and could be applied in simultaneous determination of p-acetaminophen and p-aminophenol in real samples.     

One-step preparation of silver nanoparticle embedded amorphous carbon for nonenzymatic hydrogen peroxide sensing

Herein, we report a rapid and facile fabrication of Ag/C hybrid by anchoring Ag nanoparticles in amorphous carbon network for application in amperometric sensing of hydrogen peroxide. Ag/C hybrid was prepared by simply mixing silver nitrate aqueous solution with ethylene glycol and diphosphorus pentoxide in one step at room temperature. The embedding of Ag nanoparticles into the amorphous carbon support can greatly strengthen the stability of Ag nanoparticles, protecting them from oxidizing without loss of conductivity. The nanocomposite was investigated by transmission electron microscopy, energy dispersive X-ray analysis, X-ray diffraction technique, X-ray photoelectron spectroscopy and electrochemical measurements. The prepared Ag/C hybrid was fabricated onto the surface of glassy carbon electrode to investigate the sensing property towards hydrogen peroxide. The fabricated electrochemical sensor can determine hydrogen peroxide with a detection limit of 0.1 μM and up to 5.5 mM.     

Fabrication of magnetic porous pseudo-carbon paste electrode electrochemical biosensor and its application in detection of schistosoma egg antigen

A novel and sensitive electrochemical sensor based on magnetic porous pseudo-carbon paste electrode (MPPCPE) for schistosoma egg antigen (SEA) detection is described. MPPCPE was fabricated by mixing polymethyl methacrylate microspheres (PMMA) as the template, magnetic powder and graphite powders as the fillers, and pyrrole as the precursor of polymer which actually acted as the paste. After the polymerization of pyrrole catalyzed by Fe³⁺, the template PMMA microspheres were removed with toluene to form MPPCPE. The SEA on the electrode was monitored by anodic stripping voltammetry (ASV) analysis using the method of gold nanoparticle-catalyzed silver enhancement. Compared with previous magnetic carbon paste electrode (MCPE), the detection sensitivity was dramatically increased. A linear relationship between the anodic stripping peak current and the concentration of SEA from 0.02 to 1 μg/mL and a limit of detection as low as 0.01 μg/mL were obtained using MPPCPE.     

Highly sensitive electrochemical detection of mercury (II) via single ion-induced three-way junction of DNA

A “signal-on” electrochemical sensing strategy was designed for highly sensitive and selective detection of mercury (II) via its induction to three-way junction of DNA (DNA-TWJ). The TWJ consisted of the capture probe that was self-assembled on a gold electrode surface through SAu bond, the signal probe that was labeled with ferrocene (Fc) and contained single T–T mismatch to capture probe, and an assistant probe for the formation of DNA-TWJ upon the presence of mercury (II). This process caused the Fc tag approaching the electrode for fast electron transfer and thus increased the oxidation current. The “signal-on” sensing method could detect Hg^2 + ranging from 0.005 to 100 nM. The assay was simple and fast. It showed potential application in on-site and real-time Hg^2 + detection.     

Direct determination of arsenate based on its electrocatalytic reduction at the poly(aniline-co-o-aminophenol) electrode

It was found that the copolymer poly(aniline-co-o-aminophenol) (PANOA) can strongly catalyze the reduction of arsenate in a NaCl solution, which was proved by cyclic voltammetry and the determination of activation energy. On the basis of the electrocatalytic reduction of arsenate, the PANOA copolymer was used as a probe to determine directly arsenate. The electrocatalytic activity of the PANOA electrode toward As(V) reduction strongly depended on the pH and the applied potential. Under the optimal conditions, the PANOA electrode can be used to determine directly As(V) concentration in a wide linear range (n = 19) of 0.949 and 495 μM with a correlation coefficient of 0.995 and a limit of detection of 0.495 μM. The sensitivity of the electrode was 0.192 μA μM^?1 cm^?2. The PANOA electrode had the good storage stability and a less negative operation potential of ?0.15 V (vs. SCE).     

Ferrocene-modified Fe3O4@SiO2 magnetic nanoparticles as building blocks for construction of reagentless enzyme-based biosensors

A novel amperometric glucose biosensor was developed by entrapping glucose oxidase (GOD) in chitosan (CS) composite doped with ferrocene monocarboxylic acid-modified magnetic core-shell Fe₃O₄@SiO₂ nanoparticles (FMC-AFSNPs). It is shown that the obtained magnetic bio-nanoparticles attached to the surface of a carbon paste electrode (CPE) with the employment of a permanent magnet showed excellent electrochemical characteristics and at the same time acted as mediator to transfer electrons between the enzyme and the electrode. Under optimal conditions, this biosensor was able to detect glucose in the linear range from 1.0 × 10⁻⁵ to 4.0 × 10⁻³ M with a detection limit of 3.2 μM (S/N = 3). This immobilization approach effectively improved the stability of the electron transfer mediator and is promising for construction of biosensor and bioelectronic devices.     

Development of an ionic liquid modified screen-printed graphite electrode and its sensing in determination of dopamine

A novel screen-printing ink consisted of graphite, cellulose acetate and ionic liquid n-octylpyridinum hexafluorophosphate (OPPF) was developed and investigated. The graphite–cellulose acetate system was employed as the basic ink system, which could be easily printed onto the ploy(vinyl chloride) (PVC) substrate. With the natural viscosity and high conductivity of OPPF, the screen-printed electrode (SPE) from the OPPF modified ink exhibited very attractive properties, such as high stability and electrochemical reactivity, low background current and wide electrochemical window. Furthermore, the electrode possessed excellent electrocatalytic activity for the oxidation of dopamine. The linear range for the determination of dopamine was from 1.0 μM to 2.5 mM and the detection limit was 0.5 μM.     

Switchable electrode functionalized with an azobenzene-containing copolymer thin film using the Langmuir–Schaefer technique for a “smart” uric acid/air fuel cell

A new photoswitchable electrode triggered by a brief light signal was fabricated by depositing an azobenzene-containing copolymer on an indium tin oxide substrate decorated with gold nanoparticles. The polymer formed a compact, complete thin film on the electrode surface using the Langmuir–Schaefer technique and offered reversible and stable switching performance. The conductivity and hydrophilicity of the electrode changed under UV/visible light due to the photoisomerization of the azobenzene moieties in the polymer film, influencing electron transfer and mass transport at the electrode. The electrochemical characterization demonstrated that the electrode exhibited reversibly switchable electrochemical behavior. In its active state, the as-prepared electrode possessed efficient electrocatalytic capability towards uric acid oxidation with a maximum anodic current density of 0.97 mA·cm^− 2. The uric acid/air fuel cell assembled from the photo-triggered anode and a Pt/C-modified cathode operated with an open circuit voltage of 0.12 V and a maximum power density of 41.33 μW·cm^− 2. The cell exhibited reversible switching performance (four cycles) and high stability: after one month the power output was 94.2% of the original maximum value.     

A microfluidic electrochemical device for high sensitivity biosensing: Detection of nanomolar hydrogen peroxide

We report herein a simple device for rapid biosensing consisting of a single microfluidic channel made from poly(dimethylsiloxane) (PDMS) coupled to an injector, and incorporating a biocatalytic sensing electrode, reference and counter electrodes. The sensing electrode was a gold wire coated with 5 nm glutathione-decorated gold nanoparticles (AuNPs). Sensitive detection of H₂O₂ based on direct bioelectrocatalysis by horseradish peroxidase (HRP) was used for evaluation. HRP was covalently linked the glutathione–AuNPs. This electrode presented quasi-reversible cyclic voltammetry peaks at ?0.01 V vs. Ag/AgCl at pH 6.5 for the HRP heme Fe^III/Fe^II couple. Direct electrochemical activity of HRP was used to detect H₂O₂ at high sensitivity with a detection limit of 5 nM in an unmediated system.     

Zeptomolar detection of Hg2 + based on label-free electrochemical aptasensor: One step closer to the dream of single atom detection

An ultra-sensitive and highly selective electrochemical label-free aptasensor is proposed for the quantitation of Hg^2 + based on the hybridization/dehybridization of double-stranded DNA (dsDNA) on a gold electrode. Thiol-substituted single-stranded DNA (ssDNA) is self-assembled on the gold electrode surface through the SAu interaction. The hybridization of ssDNA with complementary DNA (cDNA) and the consequences of dehybridization in the presence of mercury ions are followed through differential pulse voltammetry (DPV) responses using a [Fe(CN)₆]^{3 −/4 −} redox probe. The formation of a thymine–Hg^2 +–thymine (T–Hg^2 +–T) complex is the key to producing a highly selective and sensitive aptasensor for Hg^2 + determination. Specifically, the present electrochemical aptasensor is able to quantify Hg^2 + ions in concentrations from 5 zeptomolar (zM) to 55 picomolar (pM) with a limit of detection of 0.6 zM, close to the dream of single atom detection, without requiring a complicated procedure or expensive materials.