Azafullerene encapsulated single-walled carbon nanotubes with n-type electrical transport property

Electrical transport properties of C60 and C59N encapsulated single-walled carbon nanotubes (SWNTs) are investigated by fabricating them as the channels of field effect transistor (FET) devices at room temperature. Their measurements indicate that C60@SWNTs exhibit the enhanced p-type characteristics compared with the case of pristine SWNTs, whereas C59N@SWNTs show the n-type behavior. The novel transport properties of peapods can be explained by the charge-transfer effect, which can modify the electronic structure of SWNTs.     

A high performance carrier for SnO2 nanoparticles used in lithium ion battery

Ferrocene-encapsulated single-walled carbon nanotubes (Fc@SWNTs) are developed as carriers for attaching SnO(2). When Fc@SWNTs coated with SnO(2) nanoparticles were used as anode material in lithium ion batteries, the reversible capacity remained over 900 mA h g(-1) after 40 cycles, much higher than other carbon nanomaterials.     

Plasma Processing Based Synthesis of Functional Nanocarbons

Our recent research has shown that plasma processing techniques, which allow versatile control of both chemical and physical aspects, have considerable potential for the innovative synthesis and functionalization of three varieties of low-dimensional nanocarbons, which show great promise in the development of nanoscience and its applications. In the case of 0-D fullerenes, the mission is the high-yield production of atom (X) encapsulated fullerenes (X@C₆₀). The formation of macro-quantities of charge-exploited Li@C₆₀ and overwhelmingly-high purity spin-exploited N@C₆₀ are realized for the first time by the control of alkali-fullerene and nitrogen double plasmas, respectively. In the case of 1-D carbon nanotubes the challenge is precise structure control, i.e., chirality control of single-walled carbon nanotubes (SWNTs). The extremely narrow-chirality distributed growth of SWNTs is realized with time-programmed and nonmagnetic-catalyzed plasma CVD. As for functionalization of SWNTs, the enhanced p-type C₆₀@SWNTs created under the substrate-bias control in collisionless plasmas are found to be effective for harvesting solar energy in the infrared wavelength range and adapted to the use for multiple exciton generation in solar cells. Concerning 2-D graphene, our aim is to overcome two serious issues for electronics applications. One is the realization of the direct growth of graphene on an insulating (SiO₂) substrate by adjusting the growth parameters using non-equilibrium diffusion plasma CVD. The other is the direct fabrication of field-effect transistor device of a narrow-width (≥20 nm) graphene nanoribbon using a new, simple, and scalable method based on rapid heating plasma CVD, which shows a clear transport gap and a high on/off ratio. Finally the prospects for the above-mentioned results are discussed together with ripple effects of the nanocarbon research on the progress of nanoscience and its applications.     

Li2C2, a High‐Capacity Cathode Material for Lithium Ion Batteries

As a typical alkaline earth metal carbide, lithium carbide (Li₂C₂) has the highest theoretical specific capacity (1400 mA h g^?1) among all the reported lithium‐containing cathode materials for lithium ion batteries. Herein, the feasibility of using Li₂C₂ as a cathode material was studied. The results show that at least half of the lithium can be extracted from Li₂C₂ and the reversible specific capacity reaches 700 mA h g^?1. The C?C bond tends to rotate to form C4 (C?C???C?C) chains during lithium extraction, as indicated with the first‐principles molecular dynamics (FPMD) simulation. The low electronic and ionic conductivity are believed to be responsible for the potential gap between charge and discharge, as is supported with density functional theory (DFT) calculations and Arrhenius fitting results. These findings illustrate the feasibility to use the alkali and alkaline earth metal carbides as high‐capacity electrode materials for secondary batteries.     

Hybrids of Copolymers of Fluorene and C60‐Carrying‐Carbazole with Semiconducting Single‐Walled Carbon Nanotubes

Three different copolymers of C₆₀‐carrying‐carbazole and fluorene units with different copolymer composition ratios were designed and synthesized. On the basis of photoluminescence, atomic force microscopy, and Vis‐NIR and Raman spectroscopic analysis, we found that these copolymers solubilize only semiconducting single‐walled carbon nanotubes (sem‐SWNTs) to form copolymer/sem‐SWNT hybrids, in which energy transfer from the copolymer/C₆₀ moieties to the SWNTs was revealed. By comparing two possible hybrid structures with molecular‐mechanics simulations, the greatest stabilization was found when the C₆₀ moieties lay on the sem‐SWNT surfaces.     

Superfine Expanded Graphite with Large Capacity for Lithium Storage

A superfine expanded graphite (s‐EG) fiber material was investigated as an anode material for lithium‐based batteries. The fibers were prepared by decomposition of dicarbon monofluoride‐intercalated graphite. The high resolution transmission electron microscopy (HRTEM) images showed the fiber thickness in range of 2–3 nm with several microns in length. Lithium storage capacity in this material was measured in lithium half cells. High lithium storage capacity of about 1000 mAh · g^–1 at a rate of C/10, corresponding to Li₃C₆ composition was obtained. The material showed fairly good rate capability exhibiting lithium storage capabilities even at 60C. As a effect of ball milling, the s‐EG showed crystallographic ordering in the sample with reduced the lithium storage capacity corresponding to composition of LiC₆. A simple mathematical relation to account for the excess lithium storage capacity in this material is put forward.     

A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Helical superstructures of fullerene peapods and empty single-walled carbon nanotubes formed in water

Aqueous dispersions of fullerene C70-filled carbon nanotubes (C70@SWNTs or peapods) and empty single-walled carbon nanotubes (empty SWNTs) were prepared with the aid of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (1), which is a carbon nanotube solubilizer. This is the first report describing the preparation and characterization of the transparent dispersion/dissolution of the peapods. The UV-vis-near-IR spectra of C70@SWNTs-1 and empty SWNTs-1 were almost identical. We found by means of transmission electron microscopy and atomic force microscopy that the empty SWNTs and C70-peapods form helical nanostructures in the shapes of rings, irregular rings, lassos, handcuffs, catenanes, pseudorotaxanes, and figure-eight structures. The mechanism of the superstructure formation has been discussed in relation to the unique characteristics of stiff polymer chains with the aid of an off-lattice Monte Carlo simulation.     

Nano-crystalline FeOOH mixed with SWNT matrix as a superior anode material for lithium batteries

Nano-crystalline FeOOH particles(5～10 nm) have been uniformly mixed with electric matrix of single-walled carbon nanotubes(SWNTs)for forming FeOOH/SWNT composite via a facile ultrasonication method. Directly using the FeOOH/SWNT composite(containing 15 wt%SWNTs) as anode material for lithium battery enhances kinetics of the Li+insertion/extraction processes, thereby effectively improving reversible capacity and cycle performance, which delivers a high reversible capacity of 758 mAh g-1under a current density of 400 mA g-1even after 180 cycles, being comparable with previous reports in terms of electrochemical performance for FeOOH anode. The good electrochemical performance should be ascribed to the small particle size and nano-crystalline of FeOOH, as well as the good electronic conductivity of SWNT matrix.     

Covalent Attachment of Anderson‐Type Polyoxometalates to Single‐Walled Carbon Nanotubes Gives Enhanced Performance Electrodes for Lithium Ion Batteries

Single‐walled carbon nanotubes (SWNTs) covalently functionalized with redox‐active organo‐modified polyoxometalate (POM) clusters have been synthesized and employed as electrode materials in lithium ion batteries. The Anderson cluster [MnMo₆O₂₄]^9? is functionalized with Tris (NH₂C(CH₂OH)₃) moieties, giving the new organic–inorganic hybrid [N(nC₄H₉)₄]₃[MnMo₆O₁₈{(OCH₂)₃CNH₂}₂]. The compound is then covalently attached to carboxylic acid‐functionalized SWNTs by amide bond formation and the stability of this nanocomposite is confirmed by various spectroscopic methods. Electrochemical analyses show that the nanocomposite displays improved performance as an anode material in lithium ion batteries compared with the individual components, that is, SWNTs and/or Anderson clusters. High discharge capacities of up to 932 mAh g^?1 at a current density of 0.5 mA cm^?2 can be observed, together with high long‐term cycling stability and decreased electrochemical impedance. Chemisorption of the POM cluster on the SWNTs is shown to give better electrode performance than the purely physisorbed analogues.     

聚吡咯改性电沉积Sn负极材料的电化学性能

本工作采用直接在铜箔表面恒电流电沉积的方法制备Sn负极,以NiCl2为沉积电解液的添加剂得到了Sn空心管,提高了单纯Sn负极的可逆比容量,60次循环后仍剩余184.3 mAh·g-1。进一步引入聚吡咯进行表面修饰改性,有效地提高了沉积电极的电化学循环性能,60次循环后仍剩余440.6 mAh·g-1可逆比容量,同时具备良好的循环稳定性。沉积电极可直接用作锂离子电池负极,无需任何粘结剂,电极装配操作简单。     

聚吡咯改性电沉积Sn负极材料的电化学性能

本工作采用直接在铜箔表面恒电流电沉积的方法制备Sn负极,以NiCl₂为沉积电解液的添加剂得到了Sn空心管,提高了单纯Sn负极的可逆比容量,60次循环后仍剩余184.3 mAh·g^-1。进一步引入聚吡咯进行表面修饰改性,有效地提高了沉积电极的电化学循环性能,60次循环后仍剩余440.6 mAh·g^-1可逆比容量,同时具备良好的循环稳定性。沉积电极可直接用作锂离子电池负极,无需任何粘结剂,电极装配操作简单。     

High‐Performance Lithium‐Ion Anodes with Hierarchically Assembled Single‐Crystal SnO2 Nanoflake Spheres

A large‐scale hierarchical assembly route is reported for the formation of SnO₂ on the nanoscale that contains rigid and robust spheres with irregular channels for rapid access of Li ions into the hierarchically structured interiors. Large volume changes during the process of Li insertion and extraction are accommodated by the SnO₂ nanoflake spheres’ internal porosity. The hierarchical SnO₂ nanoflake spheres exhibit good lithium storage properties with high capacity and long‐lasting performance when used as lithium‐ion anodes. A reversible capacity of 517 mA h g^?1, still greater than the theoretical capacity of graphite (372 mA h g^?1), after 50 charge–discharge cycles is attained. Meanwhile, the synthesis process is simple, inexpensive, safe, and broadly applicable, providing new avenues for the rational engineering of electrode materials with enhanced conductivity and power.     

A novel anode material of antimony nitride for rechargeable lithium batteries

Antimony nitride thin film has been successfully fabricated by magnetron sputtering method and its electrochemistry with lithium was investigated for the first time. The reversible discharge capacity of Sb₃N/Li cells cycled between 0.3 V and 3.0 V was found above 600 mAh/g. By using transmission electron microscopy and selected area electron diffraction measurements, the conversion reaction of Sb₃N into Li₃Sb and Li₃N was revealed during the lithium electrochemical reaction of Sb₃N thin film electrode. The high reversible capacity and the good cycleability made Sb₃N one of promising anode materials for future rechargeable lithium batteries.     

Monodispersed SWNTs Assembled Coating Layer as an Alterna-tive to Graphene with Enhanced Alkali-ion Storage Performance

Graphene coating is commonly used to improve the performance of electrode materials,while its steric hindrance effect hampers fast ion transport with compromised rate capability.Herein,a unique single-walled carbon nanotubes(SWNTs)coating layer,as an alternative to graphene,has been developed to improve the battery behavior of iron-based anodes.Benefiting from the structure merits of mesoporous SWNTs layer for fast electron/ion transport and hollow Fe₃O₄ for volume accommodation,as-prepared Fe₃O₄@SWNTs exhibited excellent lithium storage performance.It delivers a high capacity,excellent rate capability,and long lifespan with capacities of 582 mA·h·g^-1 at 5 A·g^-1 and 408 mA·h·g^-1 at 8 A·g^-1 remained after 1000 cycles.Such performance is better than graphene-coated Fe₃O₄ and other SWNT-Fe₃O₄ architectures.Besides,SWNTs coating is also used to improve the sodium and potassium storage performance of FeSe₂.The kinetics analysis and ex-situ experiment further reveal the effect of SWNTs coating for fast electron/ion transfer kinetics and good structure stability,thus leading to the superior performance of SWNTs-coated composites.     

Effects of catalytic oxidation on the electrochemical performance of common natural graphite as an anode material for lithium ion batteries

We demonstrate for the first time that the reversible capacity of common natural graphite modified by catalytic oxidation can serve as an anode material for lithium ion batteries with above-theoretical capacity of graphite. The enhancement of reversible lithium capacity from 251 to >372 mAh g⁻¹ results from an increase in the number of micropores and nanometer channels, which are formed by both chemical and catalytic oxidation. Lithium can also form alloys with metals used as oxidation catalysts, and these alloys may also contribute to the enhancement of reversible lithium capacity.     

Mass spectrometric investigation of the aggregation and coalescence of fullerenes in C60-modified poly(N-vinylcarbazole) by UV-laser ablation

The phenomena of aggregation and coalescence of fullerenes in the UV-laser ablation time-of-flight mass spectrometric investigation of C₆₀-modified poly(N-vinylcarbazole) both in the positive and in the negative ion channels have been observed. The results indicate that in C₆₀ chemically modified PVK (C₆₀–PVK) copolymer the nascent fullerene fragments ruptured from main chain can easily coalesce into large fullerenes through collisions, whereas in the C₆₀-doped PVK the aggregation and coalescence of C₆₀ were relative weak due to nonbounding action and incomplete charge transfer behavior between C₆₀ and PVK. Furthermore, the photoinduced electron transfer behavior between C₆₀ and carbazole units in the C₆₀ chemically modified poly(N-vinylcarbazole) in benzonitrile by laser flash photolysis at 355 nm has also been investigated. Efficiency of the anion radical of C₆₀ in copolymer at 1080 nm is higher than that of the C₆₀-doped poly(N-vinylcarbazole) polymers. The formation of a C₆₀ radical anion may be ascribed to photoinduced electron transfer between C₆₀ pendanted on the main chain backbone and the inter-, and intrachain carbazole units in the copolymer. © 1997 John Wiley & Sons, Inc. 35 : 1185–1190, 1997     

Dependence of the dispersion behavior of [60]fullerene in aqueous media on the chain length of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) as a dispersing agent

We have investigated the effect of the chain length of temperature-sensitive poly(N-isopropylacrylamide) (PIPAAm) on the dispersion of [60]fullerene (C₆₀) in aqueous media through an interaction between PIPAAm and C₆₀ below the lower critical solution temperature (LCST) of PIPAAm. UV–vis absorption spectral measurements showed that the saturated amount of the dispersed C₆₀ increased in proportion to the chain length of the PIPAAm. Additionally, an absorption band at around 430 nm was observed in the dispersed C₆₀ solution and was assigned to a C₆₀/PIPAAm complex. The complex formed an amorphous molecular assembly between C₆₀ molecules and PIPAAm chains, the structure of which was confirmed in a transmission electron microscopy image. Dynamic light scattering measurements indicated that the particle size of the C₆₀/PIPAAm complex increased with the chain length of the PIPAAm. From electrophoretic laser light scattering measurements, the zeta potential of the C₆₀/PIPAAm complex was found to be shifted from a negative value to zero with an increase in the chain length of PIPAAm. Longer PIPAAm chains, however, gave rise to a higher dispersion stability of the complex. Similar to the dispersion behavior of PIPAAm-C₆₀ conjugates in aqueous solutions, the aqueous C₆₀ dispersion with PIPAAm exhibited rapid, and reversible dispersion–aggregation changes in response to temperature alternation across the LCST.     

Lithium electrochemistry of NiSe2: A new kind of storage energy material

NiSe₂ thin film has been successfully fabricated by reactive pulsed laser deposition and was investigated for its electrochemistry with lithium for the first time. The reversible discharge capacities of NiSe₂/Li cells cycled between 1.0 V and 3.0 V were found in the range of 314.9–467.5 mA h g⁻¹ during the first 200 cycles. By using ex situ X-ray diffraction, transmission electron microscopy, and selected-area electron diffraction measurements, the intermediates of β-NiSe, and Ni₃Se₂ were identified during the reversible conversions of NiSe₂ into metal nickel and Li₂Se. Both cation (nickel) and anion (selenium) in NiSe₂ provide the redox active centers in its electrochemical reaction with lithium, indicating one of the features of its lithium electrochemistry. The high reversible capacity and good cycle ability of NiSe₂ electrode made it become a promising cathode material for future rechargeable lithium batteries.     

Synergistic Effect of SnO2/ZnWO4 Core–Shell Nanorods with High Reversible Lithium Storage Capacity

High reversible lithium storage capacity is obtained from novel SnO₂/ZnWO₄ core–shell nanorods. At C/20 (20 h per half cycle) rate, the reversible capacity of SnO₂/ZnWO₄ core–shell nanorods is as high as 1000 mAh g^?1, much higher than that of pure ZnWO₄, SnO₂, or the traditional theoretical result of the simple mixture. Such performance can be attributed to the synergistic effect between the nanostructured SnO₂ and ZnWO₄. The distinct electrochemical activity of ZnWO₄ nanorods probably activates the irreversible capacity of the SnO₂ nanoparticles. These results indicate that high‐performance lithium ion batteries can be realized by introducing the synergistic effect of one‐dimensional core–shell nanocomposites.