Li4Ti5O12 Anode: Structural Design from Material to Electrode and the Construction of Energy Storage Devices

Spinel Li₄Ti₅O₁₂, known as a zero‐strain material, is capable to be a competent anode material for promising applications in state‐of‐art electrochemical energy storage devices (EESDs). Compared with commercial graphite, spinel Li₄Ti₅O₁₂ offers a high operating potential of ∼1.55 V vs Li/Li⁺, negligible volume expansion during Li⁺ intercalation process and excellent thermal stability, leading to high safety and favorable cyclability. Despite the merits of Li₄Ti₅O₁₂ been presented, there still remains the issue of Li₄Ti₅O₁₂ suffering from poor electronic conductivity, manifesting disadvantageous rate performance. Typically, a material modification process of Li₄Ti₅O₁₂ will be proposed to overcome such an issue. However, the previous reports have made few investigations and achievements to analyze the subsequent processes after a material modification process. In this review, we attempt to put considerable interest in complete device design and assembly process with its material structure design (or modification process), electrode structure design and device construction design. Moreover, we have systematically concluded a series of representative design schemes, which can be divided into three major categories involving: (1) nanostructures design, conductive material coating process and doping process on material level; (2) self‐supporting or flexible electrode structure design on electrode level; (3) rational assembling of lithium ion full cell or lithium ion capacitor on device level. We believe that these rational designs can give an advanced performance for Li₄Ti₅O₁₂‐based energy storage device and deliver a deep inspiration.     

The synergic effects of Ca and Sm co-doping on the crystal structure and electrochemical performances of Li4-xCaxTi5-xSmxO12 anode material

Li₄Ti₅O₁₂ as the well-known “zero strain” anode material for lithium ion batteries (LIBs) suffers from low intrinsic ionic and electronic conductivity. The strategy of lattice doping has been widely taken to relieve the intrinsic issues. But the roles of the dopants are poorly understood. Herein, we propose to modulate the crystal structure and improve the electrochemical performance of Li₄Ti₅O₁₂ by substituting Li and Ti with Ca and Sm, respectively. The roles of Ca and Sm on the crystal structure and electrochemical performances have been comprehensively investigated by means of X-ray diffraction (XRD), neutron diffraction (ND) and electrochemical analysis. The Rietveld refinement of ND data indicate that Ca and Sm prefer to take 8a site (tetrahedral site) and 16d site (octahedral site), respectively. Li_3.98Ca_0.02Ti_4.98Sm_0.02O₁₂ has the longer Li1-O bond and shorter Ti-O bond length which reduces Li⁺ migration barrier as well as enhances the structure stability. Ca-Sm co-doping also alleviates the electrode polarization and enhances the reversibility of oxidation and reduction. In compared to bare Li₄Ti₅O₁₂ and Li_3.95Ca_0.05Ti_4.95Sm_0.05O₁₂, Li_3.98Ca_0.02Ti_4.98Sm_0.02O₁₂ electrode shows the lower charge transfer resistance, higher Li⁺ diffusion coefficient, better rate capability and cycling performance. The proposed insights on the roles of dopants are also instructive to design high performance electrode materials by lattice doping.     

Doping-induced memory effect in Li-ion batteries: the case of Al-doped Li4Ti5O12

In Li-ion batteries (LIBs), a memory effect has been revealed in two-phase electrode materials such as olivine LiFePO₄ and anatase TiO₂, which complicates the two-phase transition and influences the estimation of the state of charge. Practical electrode materials are usually optimized by the element doping strategy, however, its impact on the memory effect has not been reported yet. Here we firstly present the doping-induced memory effect in LIBs. Pristine Li₄Ti₅O₁₂ is free from the memory effect, while a distinct memory effect could be induced by Al-doping. After being discharged to a lower cutoff potential, Al-doped Li₄Ti₅O₁₂ exhibits poorer electrochemical kinetics, delivering a larger overpotential during the charging process. This dependence of the overpotential on the discharging cutoff leads to the memory effect in Al-doped Li₄Ti₅O₁₂. Our discovery emphasizes the impact of element doping on the memory effect of electrode materials, and thus has implications for battery design.     

Improving the Electrochemical Performance of the Li4Ti5O12 Electrode in a Rechargeable Magnesium Battery by Lithium–Magnesium Co‐Intercalation

Rechargeable magnesium batteries have attracted recent research attention because of abundant raw materials and their relatively low‐price and high‐safety characteristics. However, the sluggish kinetics of the intercalated Mg²⁺ ions in the electrode materials originates from the high polarizing ability of the Mg²⁺ ion and hinders its electrochemical properties. Here we report a facile approach to improve the electrochemical energy storage capability of the Li₄Ti₅O₁₂ electrode in a Mg battery system by the synergy between Mg²⁺ and Li⁺ ions. By tuning the hybrid electrolyte of Mg²⁺ and Li⁺ ions, both the reversible capacity and the kinetic properties of large Li₄Ti₅O₁₂ nanoparticles attain remarkable improvement.     

Electrochemical behavior and stability of Li4Ti5O12 in a broad voltage window

Electrochemical behavior and stability of spinel Li₄Ti₅O₁₂ are investigated in a broad voltage window (0.0–5.0 V vs. Li/Li⁺). The voltage profile of the Li₄Ti₅O₁₂ electrode shows a plateau region at 1.55 V and two sloped regions below 1.55 V when the electrode is cycled between 0.0 and 2.0 V. It is found that Li₄Ti₅O₁₂ maintains high lithium storage characteristic with the increase of the current density. Moreover, Li₄Ti₅O₁₂ shows excellent rate performance in 0.0–2.0 V and good cyclic performances in 0.0–4.0 and 1.0–5.0 V. Besides, the crystal structure is kept when it is cycled between 0.0 and 5.0 V.     

Sol–gel preparation and electrochemical properties of La-doped Li4Ti5O12 anode material for lithium-ion battery

A sol–gel method using Ti(OC₄H₉)₄, LiCH₃COO·2H₂O, and La(NO₃)₃·6H₂O as starting materials and ethyl acetoacetate as chelating agent to prepare pure and lanthanum (La)-doped Li₄Ti₅O₁₂ is reported. The structure and morphology of the active materials characterized by powder X-ray diffraction and scanning electron microscopy analysis indicate that doping with a certain amount of La³⁺ does not affect the structure of Li₄Ti₅O₁₂, but can restrain the agglomeration of the particles during heat treatment. The electrochemical properties measured by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge–discharge cycling tests show that La-doped Li₄Ti₅O₁₂ presents a much improved electrochemical performance due to a decrease in charge transfer resistance. At current densities of 1 and 5 C, the La-doped Li₄Ti₅O₁₂ exhibits excellent reversible capacities of 156.16 and 150.79 mAh?g^?1, respectively. The excellent rate capability and good cycling performance make La-doped Li₄Ti₅O₁₂ a promising anode material for lithium-ion batteries in energy storage systems.     

Ab initio Studies on Li4+xTi5O12 Compounds as Anode Materials for Lithium‐Ion Batteries

The structural and electronic properties of Li_4+xTi₅O₁₂ compounds (with 0≤x≤6)—to be used as anode materials for lithium‐ion batteries—are studied by means of first principles calculations. The results suggest that Li₄Ti₅O₁₂ can be lithiated to the state Li_8.5Ti₅O₁₂, which provides a theoretical capacity that is about 1.5 times higher than that of the compound lithiated to Li₇Ti₅O₁₂. Further insertion of lithium species into the Li_8.5Ti₅O₁₂ lattice results in a clear structural distortion. The small lattice expansion observed upon lithium insertion (about 0.4 % for the lithiated material Li_8.5Ti₅O₁₂) and the retained [Li₁Ti₅]^16dO₁₂ framework indicate that the insertion/extraction process is reversible. Furthermore, the predicted intercalation potentials are 1.48 and 0.05 V (vs Li/Li⁺) for the Li₄Ti₅O₁₂/Li₇Ti₅O₁₂ and Li₇Ti₅O₁₂/Li_8.5Ti₅O₁₂ composition ranges, respectively. Electronic‐structure analysis shows that the lithiated states Li_4+xTi₅O₁₂ are metallic, which is indicative of good electronic‐conduction properties.     

Synthesis and electrochemical performances of Li4Ti4.95Zr0.05O12/C as anode material for lithium-ion batteries

Spinel Li₄Ti_5 − x Zr _x O₁₂/C (x = 0, 0.05) were prepared by a solution method. The structure and morphology of the as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The electrochemical performances including charge–discharge (0–2.5 V and 1–2.5 V), cyclic voltammetry, and ac impedance were also investigated. The results revealed that the Li₄Ti_4.95Zr_0.05O₁₂/C had a relatively smaller particle size and more regular morphology than that of Li₄Ti₅O₁₂/C. Zr⁴⁺ doping enhanced the ability of lithium-ion diffusion in the electrode. It delivered a discharge capacity 289.03 mAh g⁻¹ after 50 cycles for the Zr⁴⁺-doped Li₄Ti₅O₁₂/C while it decreased to 264.03 mAh g⁻¹ for the Li₄Ti₅O₁₂/C at the 0.2C discharge to 0 V. Zr⁴⁺ doping did not change the electrochemical process, instead enhanced the electronic conductivity and ionic conductivity. The reversible capacity and cycling performance were effectively improved especially when it was discharged to 0 V.     

A strategy for scalable synthesis of Li4Ti5O12/reduced graphene oxide toward high rate lithium-ion batteries

Li₄Ti₅O₁₂/reduced graphene oxide (RGO) composites were prepared via a simple strategy. The as-prepared composites present Li₄Ti₅O₁₂ nanoparticles uniformly immobilized on the RGO sheets. The Li₄Ti₅O₁₂/RGO composites possess excellent electrochemical properties with good cycle stability and high specific capacities of 154 mAh g^− 1 (at 10C) and 149 mAh g^− 1 (at 20C), much higher than the results found in other literatures. The superior electrochemical performance of the Li₄Ti₅O₁₂/RGO composites is attributed to its unique hybrid structure of conductive graphene network with the uniformly dispersed Li₄Ti₅O₁₂ nanoparticles.     

Neutron diffraction study of Li4Ti5O12 at low temperatures

The crystal structure of the “zero-strain” positive electrode material Li₄Ti₅O₁₂ was characterized by neutron powder diffraction in the temperature range 3.4 K–300 K. No phase transition was detected, and the thermal evolution of lattice parameters has been evaluated by the 2nd order Grüneisen approximation using the Debye formalism for internal energy and intrinsic anharmonicity contributions. A relatively high Debye temperature θ_D = 689 ± 71 K was determined. The thermal behavior of cation-anion bond lengths in octahedral and tetrahedral environments is discussed. The lithium diffusion pathway in Li₄Ti₅O₁₂ was discussed on the basis of bond-valence modeling.     

Preparation and electrochemical performance of monodisperse Li4Ti5O12 hollow spheres

Monodisperse Li₄Ti₅O₁₂ hollow spheres were prepared by using carbon spheres as templates. Scanning electron microscopy images show hollow spheres that have an average outer diameter of 1.0 μm and an average wall thickness of 60 nm. Compared with Li₄Ti₅O₁₂ solids, the hollow spherical Li₄Ti₅O₁₂ exhibit an excellent rate capability and capacity retention and can be charged/discharged at 10 C (1.7 A g⁻¹) with a specific capacity of 100 mA h g⁻¹, and after 200 charge and discharge cycles at 2 C, their specific capacity remain very stable at 150 mA h g⁻¹. It is believed that the hollow structure has a relatively large contact surface between Li₄Ti₅O₁₂ and liquid electrolyte, resulting in a better electrochemical performance at high charge/discharge rate.     

Li4Ti5O12/CMK-3复合材料的制备及其作为锂离子电池负极材料的性能

将LiNO₃和Ti(OC₄H₉)₄填填充在有序介孔碳CMK-3 孔道中, 然后烧结合成了Li₄Ti₅O₁₂/CMK-3复合材料. 利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和X射线衍射(XRD)对其结构和微观形貌进行了表征. 利用差热-热重分析(TG-DTA)测试复合材料中Li₄Ti₅O₁₂的含量. 利用充放电测试、循环伏安和电化学阻抗技术考察了复合材料作为锂离子电池负极材料的性能. 发现Li₄Ti₅O₁₂分布在CMK-3孔道中及其周围, 复合材料的高倍率充放电性能显著优于商品Li₄Ti₅O₁₂, 复合材料中Li₄Ti₅O₁₂的比容量明显高于除去CMK-3的样品(在1C倍率时比容量为117.8 mAh·g^-1), 其0.5C、1C和5C倍率的放电比容量分别为160、143 和131 mAh·g^-1, 库仑效率接近100%, 5C倍率时循环100次的容量损失率只有0.62%. 本研究结果表明CMK-3明显提高了Li₄Ti₅O₁₂的高倍率充放电性能, 可能是CMK-3特殊的孔道结构和良好的导电性减小了Li₄Ti₅O₁₂的粒径并提高了其电导率.     

Nitridated mesoporous Li4Ti5O12 spheres for high-rate lithium-ion batteries anode material

Nitridated mesoporous Li₄Ti₅O₁₂ spheres were synthesized by a simple ammonia treatment of Li₄Ti₅O₁₂ derived from mesoporous TiO₂ particles and lithium acetate dihydrate via a solid state reaction in the presence of polyethylene glycol 20000. The carbonization of polyethylene glycol could effectively restrict the growth of primary particles, which was favorable for lithium ions diffusing into the nanosized TiO₂ lattice during the solid state reaction to form a pure phase Li₄Ti₅O₁₂. After a subsequent thermal nitridation treatment, a high conductive thin TiO _x N _y layer was in situ constructed on the surface of the primary nanoparticles. As a result, the nitridated mesoporous Li₄Ti₅O₁₂ structure, possessing shorter lithium-ion diffusion path and better electrical conductivity, displays significantly improved rate capability. The discharge capacity reaches 138 mAh?g^?1 at 10 C rate and 120 mAh?g^?1 at 20 C rate in the voltage range of 1–3 V.     

Ab initio studies of structural and electronic properties of Li4Ti5O12 spinel

Structural and electronic properties of Li₄Ti₅O₁₂ spinel are studied from density functional theory based first principles calculations. Differences on these properties between delithiated state Li₄Ti₅O₁₂ and lithiated state Li₇Ti₅O₁₂ are compared. The optimized lattice constant of Li₄Ti₅O₁₂ is 8.619 Å, which is even a little larger (0.2%) than 8.604 Å of the lithiated state Li₇Ti₅O₁₂. The arrangement of the Li and Ti atoms at the 16d sites of the spinel structure is also investigated in a cubic unit cell. Large 1 × 1 × 3 supercell models are constructed and used to calculate the total energy and electronic structure. The average intercalation potential is also calculated, with metallic lithium as reference.     

Preparation and characterization of Li4/3Ti5/3O4/Ag composite prepared by sol-gel technique

The powders of Li_4/3Ti_5/3O₄/Ag composite were prepared by sol-gel technique. Structural identification, surface morphology and electrochemical properties of the powders were studied by X-ray diffraction, scanning electron microscopy and galvanostatic charge-discharge experiments. The results show that Li_4/3Ti_5/3O₄/Ag composite derived from sol-gel is a composite of Li_4/3Ti_5/3O₄ and silver. Li_4/3Ti_5/3O₄/Ag composite shows higher specific capacity, higher columbic efficiency and lower polarization than Li_4/3Ti_5/3O₄. The addition of silver greatly improves the cycleability of Li_4/3Ti_5/3O₄, especially at higher charge-discharge rate.     

Effect of Nb-doping on electrochemical stability of Li4Ti5O12 discharged to 0?V

Li₄Ti_4.95Nb_0.05O₁₂ is synthesized by a citric acid-assistant sol–gel method. X-ray diffraction (XRD) reveals that highly crystalline Li₄Ti_4.95Nb_0.05O₁₂ without any impurity is obtained. The electrochemical performances of the Li₄Ti_4.95Nb_0.05O₁₂ and the Li₄Ti₅O₁₂ in the range from 0 to 2.5 V are investigated. The Li₄Ti_4.95Nb_0.05O₁₂ presents a higher specific capacity and better cycling stability than the Li₄Ti₅O₁₂ due to the improved conductivity. The Li₄Ti_4.95Nb_0.05O₁₂ exhibits a capacity as high as 231.2 mAh g⁻¹ after 100 cycles, which is much higher than the Li₄Ti₅O₁₂ (111.1 mAh g⁻¹). The effect of Nb-doping on electrochemical performance of Li₄Ti₅O₁₂ discharged to 0 V has also been discussed.     

Li2MTi6O14 (M=Sr,Ba): new anodes for lithium-ion batteries

Isostructural Li₂MTi₆O₁₄ (M=Sr, Ba) materials, prepared by a solid state reaction method, have been investigated as insertion electrodes for lithium battery applications. These titanate compounds have a structure that consists of a three-dimensional network of corner- and edge-shared [TiO₆] octahedra, 11-coordinate polyhedra for the alkali-earth ions, and [LiO₄] tetrahedra in tunnels that also contain vacant tetrahedral and octahedral sites. Electrochemical data show that these compounds are capable of reversibly intercalating four lithium atoms in a three-stage process between 1.4 and 0.5 V vs. metallic lithium. The electrodes provide a practical capacity of approximately 140 mAh/g; they are, therefore, possible alternative anode materials to the lithium titanate spinel, Li₄Ti₅O₁₂. The lithium intercalation mechanism and crystal structure of Li₂MTi₆O₁₄ (M=Sr, Ba) electrodes are discussed and compared with the electrochemical and structural properties of Li₄Ti₅O₁₂. The area-specific impedance (ASI) of Li/Li₂SrTi₆O₁₄ cells was found to be significantly lower than that of Li/Li₄Ti₅O₁₂ cells.     

Improvement of overcharge performance using Li4Ti5O12 as negative electrode for LiFePO4 power battery

Liquid state soft packed LiFePO₄ cathode lithium ion cells with capacity of 2 Ah were fabricated using graphite or Li₄Ti₅O₁₂ as negative electrodes to investigate the 3 C/10 V overcharge characteristics at room temperature. The LiFePO₄/Li₄Ti₅O₁₂ cell remained safe after the 3 C/10 V overcharge test while the LiFePO₄/graphite cell went to thermal runaway. Temperature and voltage variations during overcharge were recorded and analyzed. The cells after overcharge were disassembled to check the changes of the separated cell components. The results showed that the Li₄Ti₅O₁₂ as anode active material for LiFePO₄ cell showed obvious safety advantage compared with the graphite anode. The lithium ionic diffusion models of Li₄Ti₅O₁₂ anode and graphite anode were built respectively with the help of morphology characterizations performed by scanning electron microscopy. It was found that the different particle shapes and lithium ionic diffusion modes caused different lithium ionic conductivities during overcharge process.     

Mesoporous Spherical Li4Ti5O12 as High‐Performance Anodes for Lithium‐Ion Batteries

Porous microspherical Li₄Ti₅O₁₂ aggregates (LTO‐PSA) can be successfully prepared by using porous spherical TiO₂ as a titanium source and lithium acetate as a lithium source followed by calcinations. The synthesized LTO‐PSA possess outstanding morphology, with nanosized, porous, and spherical distributions, that allow good electrochemical performances, including high reversible capacity, good cycling stability, and impressive rate capacity, to be achieved. The specific capacity of the LTO‐PSA at 30 C is as high as 141 mA h g^?1, whereas that of normal Li₄Ti₅O₁₂ powders prepared by a sol–gel method can only achieve 100 mA h g^?1. This improved rate performance can be ascribed to small Li₄Ti₅O₁₂ nanocrystallites, a three‐dimensional mesoporous structure, and enhanced ionic conductivity.     

Influence of manganese ions dissolved from LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode on the degradation of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>-based lithium-ion batteries

A systematic investigation is conducted to evaluate the influence of dissolved manganese ions from LiMn₂O₄ cathode on the degradation of Li₄Ti₅O₁₂-based lithium-ion batteries. Worse capacity fading is found in Li₄Ti₅O₁₂-based full cells with increasing manganese ion addition. The interfacial film covered on Li₄Ti₅O₁₂ anode is affected by the manganese ion contamination during cycling, which becomes thicker but more non-uniform, and is composed by less ratio of compact components and more ratio of loose components compared with that free of contamination. Such flawed passivation film cannot restrain the further penetration of electrolyte and inhibit the contact between electrolyte and Li₄Ti₅O₁₂ anodes efficiently, thus triggering more interfacial reactions and that should be the reason for the more severe capacity degradation. Accordingly, we suggest that in addition to optimizing the chemistry and microstructure of Li₄Ti₅O₁₂ electrode, more attention should also be paid to minimizing the destructive effect imposed on the passivation film of Li₄Ti₅O₁₂ electrode by the transition metal ion contaminations.