Preparation and electrochemical performance of graphene–Pt black nanocomposite for electrochemical methanol oxidation

This work reports the preparation, characterization, and electrocatalytic characteristics of a new metallic nanocatalyst. The catalyst, Pt black–graphene oxide (Pt-GO), was prepared by deposition of Pt black on the surface of graphene oxide nanosheet and characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), and voltammetry. The Pt-graphene (Pt-GR) composite modified glassy carbon electrode (Pt-GR/GCE) was prepared with cyclic voltammetric scanning of Pt-GO/GCE in the potential range from ?1.5 to 0.2 in 0.1 M phosphate buffer solution at 50 mV·s^?1 for 5 cycles. The electrocatalytic properties of the Pt-GR/GCE for methanol (CH₃OH) oxidation have been investigated by cyclic voltammetry (CV); high electrocatalytic activity of the Pt-GR/GCE can be observed. This may be attributed to the high dispersion of Pt catalyst and the particular properties of GR support. The long-term stability of Pt-GR composite was investigated in 0.05 M CH₃OH in 0.1 M H₂SO₄ solution. It can be observed that the peak current decreases gradually with the successive scans. The loss may result from the consumption of methanol during the CV scan. It also may be due to the poisoning organic compounds. The results imply that the Pt-GR composite has good potential applications in fuel cells.     

Synthesis,characterization and electrocatalytic activity for ethanol oxidation of carbon supported Pt,Pt–Rh,Pt–SnO2 and Pt–Rh–SnO2 nanoclusters

Nanoclusters of Pt, Pt–Rh, Pt–SnO₂ and Pt–Rh–SnO₂ were successfully synthesized by polyol method and deposited on high-area carbon. HRTEM and XRD analysis revealed two phases in the ternary Pt–Rh–SnO₂/C catalyst: solid solution of Rh in Pt and SnO₂. The activity of Pt–Rh–SnO₂/C for ethanol oxidation was found to be much higher than Pt/C and Pt–Rh/C and also superior to Pt–SnO₂/C. Quasi steady-state measurements at various temperatures (30–60 °C), ethanol concentrations (0.01–1 M) and H₂SO₄ concentrations (0.02–0.5 M) showed that Pt–Rh–SnO₂/C is about 20 times more active than Pt/C in the potential range of interest for the fuel cell application.     

Synthesis and electrochemical characterization of sol–gel-derived RuO2/carbon nanotube composites

Ruthenium oxide was coated on multiwalled carbon nanotubes (MWCNTs) to obtain nanocomposite electrode which has a good response to the pH. To synthesize this electrode, gold and cobalt were coated on a stainless steel 304 substrates, respectively, and then, vertically aligned carbon nanotubes were grown on the prepared substrates by chemical vapor deposition. Gold reduced activity of the stainless steel, while cobalt served as a catalyst for growth of the carbon nanotube. Ruthenium oxide was then coated on MWCNTs via sol–gel method. At last, different techniques were used to characterize the properties of synthesized electrode including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction, and cyclic voltammetry. SEM results showed that the length of the carbon nanotubes varied with reaction time, and in this research, it was maintained around 9 μm with a diameter about 100 nm. Electrochemical analysis revealed that optimum sol concentration and heat treatment temperature to meet the best pH sensing response were 0.1 M RuCl₃ sol and 200 °C, respectively. Moreover, the obtained electrode represented a linear and near-Nernstian response (about ?63 mV/pH) throughout the whole pH range (2–12) of Britton–Robinson buffer solutions.     

Rapid and simple electrochemical detection of morphine on graphene–palladium-hybrid-modified glassy carbon electrode

A hybrid of reduced graphene oxide–palladium (RGO–Pd) nano- to submicron-scale particles was simultaneously chemically prepared using microwave irradiation. The electrochemical investigation of the resulting hybrid was achieved using cyclic voltammetry and differential pulse voltammetry. RGO–Pd had a higher current response than unmodified RGO toward the oxidation of morphine. Several factors that can affect the electrochemical response were studied, including accumulation time and potential, Pd loading, scan rate, and pH of electrolyte. At the optimum conditions, the concentration of morphine was determined using differential pulse voltammetry in a linear range from 0.34 to 12 μmol L^?1 and from 14 to 100 μmol L^?1, with detection limits of 12.95 nmol L^?1 for the first range. The electrode had high sensitivity toward morphine oxidation in the presence of dopamine (DA) and of the interference compounds ascorbic acid (AA) and uric acid (UA). Electrochemical determination of morphine in a spiked urine sample was performed, and a low detection limit was obtained. Validation conditions including reproducibility, sensitivity, and recovery were evaluated successfully in the determination of morphine in diluted human urine.

Open image in new window

     

Synthesis of carbon nanotube—nanodiamond hierarchical nanostructures and their polyurea nanocomposites

Hierarchical carbon nanostructures (HCNs) comprising functionalized nanodiamond particles (ND) covalently bonded to carbon nanotubes (CNTs) through urea or ethylene diamine linkers were synthesized using wet chemistry technique. Atomic force microscopy, transmission electron spectroscopy, and scanning electron spectroscopy reveal the pearl-necklace-like morphology of new HCNs with up to 50% of the CNT surface decorated by ND particles. Nanocomposites fabricated using polyuria/polyurethane hybrid polymer matrix and 0.2 wt.% of HCNs as a reinforcing filler show a 64% increase in tensile and elongation strength at break relatively to neat polymer.     

Electrooxidation of hydrogen at Pt/carbon nanotube catalysts for hydrogen–air fuel cell

A possibility for application of the method of thin-layer rotating disk electrode (RDE) for investigation of kinetics of hydrogen electrooxidation on highly dispersed platinum catalysts formed on the carbon nanotubes (CNT) is studied. It is shown that the polarization curves of hydrogen oxidation on the studied catalysts approach the calculated curves for the diffusion overpotential of hydrogen reaction both in the acidic and alkaline electrolytes. This is the evidence, on the one hand, for a high activity of proposed catalysts in the hydrogen oxidation reaction and, on the other hand, for incorrect use of the Koutecky–Levich equation for calculating the kinetic currents in the case under consideration. The characteristics of hydrogen–oxygen fuel cell (FC) with anode based of synthesized 40Pt/CNT catalysts are highly comparative with the characteristics of FC containing commercial 60Pt catalyst (HiSPEC 9100) on the anode.     

Electrochemical-reduced graphene oxide-modified carbon fiber as Pt–Au nanoparticle support and its high efficient electrocatalytic activity for formic acid oxidation

A simple electrochemical approach is developed to prepare reduced graphene oxide (RGO)-wrapped carbon fiber (CF) as a novel support for Pt–Au nanocatalysts. The obtained composite electrodes have been characterized by scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDX), thermal gravimetric analysis (TGA), and electrochemical methods. SEM images reveal that the Pt–Au nanoparticles deposited on RGO-wrapped CF (RGO/CF) electrode display smaller particle size and more uniform dispersion than those on the bare CF electrode. Cyclic voltammetry, linear sweep voltammetry, chronoamperometry, chronopotentiometry, Tafel plots, and electrochemical impedance spectroscopy (EIS) analyses demonstrate that the introduced RGO on CF electrode surface is beneficial to the dispersion of Pt–Au nanoparticles, as a consequence, to the enhancement of the electrocatalytic activity and the antipoisoning ability of Pt–Au towards formic acid electrooxidation.     

Structure and electrochemical performance of nanostructured Sn–Co alloy/carbon nanotube composites as anodes for lithium ion batteries

Nanoparticles of Sn–Co alloy were deposited on the surface of multi-walled carbon nanotubes (CNTs) by reductive precipitation of solution of chelating metal salts within a CNTs suspension. The Sn–Co/CNTs nano-composite revealed a high reversible capacity of 424 mA h g^?1 and stable cyclic retention at 30th cycle. The improvement of reversible capacity and cyclic performance of the Sn–Co/CNTs composite is attributed to the nanoscale dimension of the Sn–Co alloy particles and the network of CNTs. Inactive Co as glue matrix of Sn prevents the possible pulverization of nanosized alloy particles. The CNTs could be pinning the Sn–Co alloy particles on their surfaces so as to hinder the agglomeration of Sn–Co alloy particles, while maintaining electronic conduction as well as accommodating drastic volume change during Li insertion and extraction reactions.     

Construction of hierarchical porous graphene–carbon nanotubes hybrid with high surface area for high performance supercapacitor applications

Journal of Solid State Electrochemistry - Unlike activated carbon, graphene sheets are lack of ion pathways on their basal planes and prone to agglomerate or restack unfortunately for their strong...     

One-step electrochemical synthesis of Pt–CeO2 composite thin films on a glassy carbon electrode

A Pt–CeO₂ composite thin film was prepared on a glassy carbon electrode by one-step electrochemical deposition technique. The film was constructed of Pt particles well dispersed and embedded in a porous CeO₂ substrate. The prepared Pt–CeO₂/GC electrode showed a better catalytic performance toward methanol electrooxidation compared with the bulk Pt electrode.     

Enhanced photocatalytic activity of hybrid reduced graphene oxide–CeO2 hierarchical flower-like nanostructures

Research on Chemical Intermediates - The combination of the unique properties of graphene with functional characteristics of metal oxides is an interesting pathway to achieve desirable properties...     

Synthesis and electrochemical performance of sulfur–carbon composite cathode for lithium–sulfur batteries

In this paper, porous carbon was synthesized by an activation method, with phenolic resin as carbon source and nanometer calcium carbonate as activating agent. Sulfur–porous carbon composite material was prepared by thermally treating a mixture of sublimed sulfur and porous carbon. Morphology and electrochemical performance of the carbon and sulfur–carbon composite cathode were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectra (EIS), and galvanostatic charge–discharge test. The composite containing 39 wt.% sulfur obtained an initial discharge capacity of about 1,130 mA?h g^?1 under the current density of 80 mA?g^?1 and presented a long electrochemical stability up to 100 cycles.     

Synthesis and properties of zinc–nickel–carbon nanotube composite coatings

Composite electrochemical coatings modified with carbon nanotubes were produced on the basis of the zinc–nickel alloy. The functional properties (friction coefficient, protective capacity) of the composite coatings were studied in comparison with zinc–nickel alloys without a dispersed phase. It was found that, upon inclusion of carbon nanotubes particles into zinc–nickel deposits, their sliding friction coefficient decreases by a factor of 1.3–1.4 and the range of passive-state potentials becomes two times wider.     

Antimicrobial activity of new carboxymethyl chitosan–carbon nanotube biocomposites and their swell ability in different pH media

New carboxymethyl chitosan–carbon nanotube (CMCS-CNT) biocomposites were prepared and characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and normal photography. The recorded images of the CMCS-CNT biocomposites showed homogeneous distribution of carbon nanotubes into the carboxymethyl chitosan (CMCS) matrix. Their antimicrobial activity and swell ability in different pH media have been investigated. They showed a higher antimicrobial activity against tested gram-positive and gram-negative bacteria. The inhibition zone diameters are closer to that recorded for the commonly used antibiotics. They showed an increase in the swell ability in different pH media relative to the parent CMCS. It would be expected that these nanobiocomposites are promising candidates for medical applications.     

Sensitive electrochemical sensing for polycyclic aromatic amines based on a novel core–shell multiwalled carbon nanotubes@ graphene oxide nanoribbons heterostructure

Being awfully harmful to the environment and human health, the qualitative and quantitative determinations of polycyclic aromatic amines (PAAs) are of great significance. In this paper, a novel core–shell heterostructure of multiwalled carbon nanotubes (MWCNTs) as the core and graphene oxide nanoribbons (GONRs) as the shell (MWCNTs@GONRs) was produced from longitudinal partially unzipping of MWCNTs side walls using a simple wet chemical strategy and applied for electrochemical determination of three kinds of PAAs (1-aminopyrene (1-AP), 1-aminonaphthalene and 3,3′-diaminobiphenyl). Scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis and electrochemical methods were used to characterize the as-prepared MWCNTs@GONRs. Due to the synergistic effects from MWCNTs and GONRs, the oxidation currents of PAAs at the MWCNTs@GONRs modified glassy carbon (GC) electrode are much higher than that at the MWCNTs/GC, graphene/GC and bare GC electrodes. 1-AP was used as the representative analyte to demonstrate the sensing performance of the MWCNTs@GONRs/GC electrode, and the proposed modified electrode has a linear response range of 8.0–500.0 nM with a detection limit of 1.5 nM towards 1-AP.     

High loading of Pt–Ru nanocatalysts by pentagon defects introduced in a bamboo-shaped carbon nanotube support for high performance anode of direct methanol fuel cells

Bamboo-shaped carbon nanotubes (BCNTs), with a large amount of pentagon defects introduced in the walls, were explored as the support of high loaded Pt–Ru catalysts for the anode of direct methanol fuel cells (DMFCs) in comparison with conventional carbon nanotubes (CNTs) and Vulcan XC carbon black. By ethylene glycol reduction, Pt–Ru catalysts with a high loading (60 wt%) and uniform particle size of 2–3 nm were uniformly deposited on BCNTs; while 60 wt% Pt–Ru catalysts on CNTs resulted in significant agglomeration. The Pt–Ru/BCNT catalyst showed the highest activity on methanol oxidation in cyclic voltammetry and highest performance as the anode in a DMFC single cell. Such an enhancement was largely ascribed to an enhanced interaction of the introduced pentagon defects with Pt–Ru, which could promote a high loading and well dispersion of Pt–Ru catalysts and the charge transfer from Pt–Ru to the tubes.     

A comparative study of electrochemical performances of carbon nanomaterial-modified electrodes for DNA detection. Nanotubes or graphene?

Journal of Solid State Electrochemistry - A comparative study about the electrochemical response of glassy carbon electrode modified with four different carbon nanomaterial (CNM) against dsDNA is...     

A survey on the effect of ionic liquid on electrochemical behavior and electrocatalytic activity of a phosphomolybdic acid-ionic liquid-MWCNT–modified glassy carbon electrode

Journal of Solid State Electrochemistry - The surface of a glassy carbon electrode modified with multi-walled carbon nanotubes (GCE/MWCNTs) was coated with a layer of phosphomolybdic acid (PMo12)...