Densities and viscosities for ionic liquids mixtures containing [eOHmim][BF4], [bmim][BF4] and [bpy][BF4]

Densities and viscosities of binary ionic liquids mixtures, 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) were measured over the entire mole fraction from T = (298.15 to 343.15) K. The excess molar volumes were calculated and correlated by Redlich–Kiser polynomial expansions. The viscosities for pure ionic liquids were analyzed by means of the Vogel–Tammann–Fulcher equation and ideal mixing rules were applied for the ILs mixtures.     

Inhibition ability of ionic liquid [Bmim][NO3], [Bmim][BF4], and [Emim][BF4] on spontaneous coal combustion

Journal of Thermal Analysis and Calorimetry - From TG result, [Bmim][BF4] has the best inhibition ability of spontaneous coal combustion to delay the initial temperature, maximum temperature, and...     

A comparative study on the ionic liquid [bmim][BF4] and its solution with transient absorption spectroscopy

A detailed study was explored to compare the transient absorption spectra of the neat 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) with its solution in water or acetonitrile. It was concluded that the excited triplet state ³[bmim]^+* was produced after 266 nm laser irradiation, and then the neutral radical [bmim] and the cation radical [bmim] ²⁺ were formed through two possible paths. The transient absorption spectra of the neat [bmim][BF₄] and its solution were similar but the reaction kinetics were different due to their different local structures such as dimeric or cluster. The energy transfer between excited [bmim][BF₄] and β-carotene further affirmed the existence of ³[bmim]^+*. And the reaction that the hydrated electron captured by [bmim]⁺ to produce [bmim] in solution was observed.     

A new type of microemulsion containing task-special ionic liquid [NH2ebim][BF4]

The formation of microemulsions in the presence of cyclohexane, Triton X-100, n-butanol, water, and task-special ionic liquid (TSIL) (1-2-aminoethyl-3-butylimidazolium tetrafluoroborate) was studied at 25°C. The phase behavior of this ternary system was investigated. Three subregions (namely, water-in-oil phase, bicontinuous phase, and oil-in-water phase) were identified in the single-phase region by dynamic light scattering (DLS) technique and electrical conductivity measurement. Microstructures of microemulsions with different water contents have been predicted by using dissipative particle dynamics (DPD) simulation. It was found that the DPD simulations successfully reproduce the experimental results in the article. The location of TSIL in the microemulsions was predicted by DPD simulation further. The result indicates that TSIL is more easy to locate in the surfactant and cosurfactant layer and has amphiphilicity, which provides us new insights into the potential applications of TSIL-based microemulsions in separation and new nano-scale material preparation because of the interaction of TSIL with some special components at the interface of oil and water.     

Density, refractive index, interfacial tension, and viscosity of ionic liquids [EMIM][EtSO4], [EMIM][NTf2], [EMIM][N(CN)2], and [OMA][NTf2] in dependence on temperature at atmospheric pressure

The density, refractive index, interfacial tension, and viscosity of ionic liquids (ILs) [EMIM][EtSO 4] (1-ethyl-3-methylimidazolium ethylsulfate), [EMIM][NTf 2] (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide), [EMIM][N(CN) 2] (1-ethyl-3-methylimidazolium dicyanimide), and [OMA][NTf 2] (trioctylmethylammonium bis(trifluoromethylsulfonyl)imide) were studied in dependence on temperature at atmospheric pressure both by conventional techniques and by surface light scattering (SLS). A vibrating tube densimeter was used for the measurement of density at temperatures from (273.15 to 363.15) K and the results have an expanded uncertainty ( k = 2) of +/-0.02%. Using an Abbe refractometer, the refractive index was measured for temperatures between (283.15 and 313.15) K with an expanded uncertainty ( k = 2) of about +/-0.0005. The interfacial tension was obtained from the pendant drop technique at a temperature of 293.15 K with an expanded uncertainty ( k = 2) of +/-1%. For higher and lower temperatures, the interfacial tension was estimated by an adequate prediction scheme based on the datum at 293.15 K and the temperature dependence of density. For the ILs studied within this work, at a first order approximation, the quantity directly accessible by the SLS technique was the ratio of surface tension to dynamic viscosity. By combining the experimental results of the SLS technique with density and interfacial tension from conventional techniques, the dynamic viscosity could be obtained for temperatures between (273.15 and 333.15) K with an estimated expanded uncertainty ( k = 2) of less than +/-3%. The measured density, refractive index, and viscosity are represented by interpolating expressions with differences between the experimental and calculated values that are comparable with but always smaller than the expanded uncertainties ( k = 2). Besides a comparison with the literature, the influence of structural variations on the thermophysical properties of the ILs is discussed in detail. The viscosities mostly agree with values reported in the literature within the combined estimated expanded uncertainties ( k = 2) of the measurements while our density and interfacial tension data differ by more than +/-1% and +/-5%.     

Self-assembled histidine acid phosphatase nanocapsules in ionic liquid [BMIM][BF4] as functional templates for hollow metal nanoparticles

We report the biomacromolecular self-assembly of histidine acid phosphatase (HAP), an enzyme of significant biomedical and industrial importance, in the ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF(4)]). The spontaneous self-assembly of HAP enzyme in [BMIM][BF(4)] results in the formation of HAP nanocapsules. The HAP enzyme molecules were found to retain their enzymatic activity after the self-assembly process, which enabled us to utilize self-assembled HAP capsules as self-catalyzing templates for the synthesis of a range of hollow metal nanoparticles (Au, Ag, Pd, and Ni) without employing any additional reducing agent. The hollow metal nanospheres with HAP encapsulated within their cavity were found to retain enzymatic activity for at least up to four cycles, as demonstrated in the case of Au-coated HAP capsules as the model system.     

Solubility of H2S in ionic liquids [hmim][PF6], [hmim][BF4], and [hmim][Tf2N]

The solubility of hydrogen sulphide in three ionic liquids, viz. 1-hexyl-3-methylilmidazolium hexafluorophosphate ([hmim][PF₆]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim][BF₄]), and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([hmim][Tf₂N]), at temperatures ranging from 303.15 K to 343.15 K and pressures up to 1.1 MPa were determined. The solubility values were correlated using the Krichevsky–Kasarnovsky equation and Henry’s constants were obtained at different temperatures. Partial molar thermodynamic functions of solvation such as standard Gibbs free energy, enthalpy, and entropy were calculated from the solubility results. Comparison of the values obtained show that the solubility of H₂S in these three ionic liquids was in the sequence: [hmim][BF₄] > [hmim][PF₆] ≈ [hmim][Tf₂N].     

辣根过氧化物酶修饰电极在离子液体[EMIM]BF4中的直接电化学

将壳聚糖(Chi)-辣根过氧化物酶(HRP)-多壁碳纳米管(MWCNTs)的复合物修饰在玻碳电极(GCE)表面, 制备了HRP修饰电极(Chi-HRP-MWCNTs/GCE), 并将其用于在亲水性离子液体1-乙基-3-甲基咪唑四氟硼酸([EMIM]BF4)中HRP的直接电化学研究. 紫外可见光谱和红外光谱表明, HRP在复合物内保持了其原始构象. 电化学研究表明, 该修饰电极在[EMIM]BF4中的循环伏安图上出现了一对峰形良好、几乎对称的氧化还原峰, 式量电位为－0.247 V (vs. Ag/AgCl), 说明包埋在Chi-MWCNTs中的HRP与电极之间发生了直接电子传递; HRP在电极表面直接电子转移的速率常数ks为3.12 s－1; 在65 ℃的[EMIM]BF4中HRP仍然保持其活性; HRP修饰电极对过氧化氢的还原具有电催化作用, 其表观米氏常数Km为5.6×10－5 mol•L－1, 催化电流与过氧化氢浓度在5.0×10－7～5.0×10－5 mol•L－1范围内呈线性关系, 检出限为2.0×10－7 mol•L－1. 该研究为非水相生物传感器的构制提供了一种新途径.     

Electronic structure of the surface of the ionic liquid [EMIM][Tf(2)N] studied by metastable impact electron spectroscopy (MIES), UPS, and XPS

The near-surface electronic structure of the room-temperature ionic liquid (RT-IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf(2)N]) has been investigated with the combination of the electron spectroscopies metastable impact electron spectroscopy (MIES), ultraviolet photoelectron spectroscopy (UPS (HeI and HeII)), and monochromatized X-ray photoelectron spectroscopy (XPS). We find that the top of the valence band states originates from states of the cation (see also ref 1). The ultimately surface-sensitive technique MIES proves that the surface layer consists of both cations and anions. The temperature dependence of the spectra has been measured between about 160 and 610 K. Information on the glass transition and the possibility for low-temperature distillation of [EMIM][Tf(2)N] at reduced pressures is derived from the present results.     

Interaction of water with the model ionic liquid [bmim][BF4]: molecular dynamics simulations and comparison with NMR data

We report on molecular dynamics simulations of the ionic liquid [bmim][BF 4] and its mixtures with water, from zero up to 0.5 mol fraction of water. All of the simulations are carried out with two published force fields. The results are compared with each other and with published as well as new NMR data on the same mixtures, whenever possible. We perform extensive analyses of structural quantities, such as pair correlation functions, nearest-neighbor analysis and size distribution of the water clusters formed at higher concentrations. We show that the water clusters are formed almost exclusively by linear chains of hydrogen-bonded molecules. There is a nanoscale structuring of the mixtures but no macroscopic phase separation among the components, in agreement with experiment. Roughly, we identify two solvation regimes. At low water content, the ions are selectively coordinated by individual water molecules, but their ionic network is largely unperturbed. At high water content, the ionic network is somewhat disrupted or swollen in a nonspecific way by the water clusters.     

Molecular dynamics simulation of room-temperature ionic liquid mixture of [bmim][BF4] and acetonitrile by a refined force field

1-Butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) is one of the promising room-temperature ionic liquids. To test the refined force field for [bmim][BF4] proposed in our previously work (J. Phys. Chem. B, 2004, 108, 12978-12989), thermodynamic properties of mixtures of [bmim][BF4](1)+ acetonitrile (2) are presented by using molecular dynamics over the whole concentration range. The calculated densities are in good agreement with the experimental data with deviations less than 2%, indicating the force field is applicable to the mixtures. In addition, the diffusion constants, viscosities, heats of vaporization, cohesive energy densities and excess properties of the mixtures are reported. The microscopic structures are discussed in detail, corresponding to the thermodynamic properties.     

Using ionic liquid [EMIM][CH3COO] as an enzyme-‘friendly’ co-solvent for resolution of amino acids

An ionic liquid (IL), 1-ethyl-3-methylimidazolium acetate [EMIM][CH₃COO], was used in 0–4.0 M (∼60% IL, v/v), as a nonvolatile organic medium for the enzymatic resolution of amino acids. When dl-phenylalanine methyl ester was studied as a model substrate, high enantiomeric excesses (ee) of l-amino acid were obtained in all ionic concentrations; however, lower yields were observed at high IL concentrations. This IL is more enzyme-‘friendly’ than the hydrophilic organic solvent acetonitrile and those ILs containing chaotropic anions (such as [EMIM][OTs]). Among three proteases and two lipases investigated, lyophilized Bacillus licheniformis protease exhibited the best enantioselectivity and activity. Highly enantioselective resolutions were also produced for several other amino acids in 2.0 M IL. Interestingly, high ee were also found in deuterium oxide (D₂O) rather than in ordinary water, and a further enhancement was achieved with the co-existence of [EMIM][CH₃COO]. The heavy water effect was explained in terms of protein stabilization by D₂O. The secondary structural changes of enzyme in various media were interpreted by the second derivatives of FT-IR spectra.     

In situ XPS study of template-free electrodeposition of antimony nanowires from an ionic liquid

Journal of Solid State Electrochemistry - Antimony nanowires have been synthesized by template-free electrodeposition at room temperature from the ionic liquid (IL) 1-butyl-1-methylpyrrolidinium...     

Microbundles of zinc oxide nanorods: Assembly in ionic liquid [EMIM][BF4], photoluminescence and photocatalytic properties

A simple, efficient and low-temperature approach for the assembly of hierarchical Zinc oxide (ZnO) microstructures in ionic liquid [EMIM]⁺[BF₄]⁻ is reported. The as-obtained ZnO superstructures are composed of microbundles of nanorods from the center points, with the diameter and length in the range of 100-150 nm and 2-4 μm, which have been characterized by X-ray diffraction, scanning and transmission electron microscopy, and photoluminescence spectroscopy. The ZnO microstructures exhibit significant defect-related green-yellow emission and high photodegradation of dye Methyl Orange (5×10⁻⁵ mol/L) under UV excitation within 80 min.     

Investigations with infrared spectroscopy on films of the ionic liquid [EMIM]Tf2N

The reflection-absorption infrared (RAIRS) spectra of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM]Tf 2N) are presented as a function of temperature between 114 and 292 K. A comparison is made with the corresponding infrared spectra (obtained with transmission spectroscopy) from bulk [EMIM]Tf 2N. The liquid and amorphous films show rather similar spectra, indicating that the film structure is similar in both cases. On the other hand, these spectra differ considerably from those of crystalline films. Characteristic differences seen between the film and bulk spectra are attributed to the different structures of the respective networks. There are, however, indications that under all studied conditions the cation-anion interaction is between the C-H groups of the [EMIM] ring and the SO 2 groups of the anion.     

Unique role of ionic liquid [bmin][BF4] during curcumin-surfactant association and micellization of cationic, anionic and non-ionic surfactant solutions

Hydrophilic ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroburate, modified the properties of aqueous surfactant solutions associated with curcumin. Because of potential pharmaceutical applications as an antioxidant, anti-inflammatory and anti-carcinogenic agent, curcumin has received ample attention as potential drug. The interaction of curcumin with various charged aqueous surfactant solutions showed it exists in deprotonated enol form in surfactant solutions. The nitro and hydroxyl groups of o-nitrophenol interact with the carbonyl and hydroxyl groups of the enol form of curcumin by forming ground state complex through hydrogen bonds and offered interesting information about the nature of the interactions between the aqueous surfactant solutions and curcumin depending on charge of head group of the surfactant. IL[bmin][BF4] encouraged early formation of micelle in case of cationic and anionic aqueous surfactant solutions, but slightly prolonged micelle formation in the case of neutral aqueous surfactant solution. However, for curcumin IL [bmin][BF4] favored strong association (7-fold increase) with neutral surfactant solution, marginally supported association with anionic surfactant solution and discouraged (～2-fold decrease) association with cationic surfactant solution.     

Efficient, green and regioselective synthesis of 1,4,5-trisubstituted-1,2,3-triazoles in ionic liquid [bmim]BF4 and in task-specific basic ionic liquid [bmim]OH

Convenient and environmentally benign procedures have been reported for the synthesis of 1,4,5-trisubstituted-1,2,3-triazoles by the reaction of aryl azides with active methylene compounds in ionic liquid [bmim]BF₄ in the presence of l-proline as a catalyst and also in task-specific basic ionic liquid [bmim]OH. The methodologies defined herein avoid the severe conditions as posed by earlier existing methods and proved to be efficient in terms of good yields, operational simplicity, easy workup and short reaction time.