Complexation thermodynamics between butyl rhodamine B and calix[n]arenesulfonates (n = 4, 6, 8)

The characteristics of host–guest complexation between water-soluble calix[n]arenesulfonates (CnS, n = 4, 6, 8) and butyl rhodamine B (BRB) were investigated by fluorescence spectrometry. Fluorescence spectroscopy experiments were performed in pH 8.0 Tris(3-aminomethane)–HCl buffer solution at different temperature to calculate the stability constants (K_S) for the stoichiometric 1:1 inclusion complexes of C4S, C6S, and C8S with BRB. The complex stability constant monotonically increased with the number of phenolic units in the calixarene ring. The thermodynamic parameters at T = 298 K for the inclusion complexes were calculated through Van’t Hoff analysis. The inclusion complexes of CnS with BRB were driven by the favorable enthalpic changes, accompanying negative entropy changes. The stability constants were affected by the acidity of the solution. When pH was 8.0, the stability constants reached the maximum. The complex interaction was mainly attributed to the weak forces including electrostatic interaction and hydrogen bonding.     

Recognition of DNA based on changes in the fluorescence intensity of CdSe/CD QDs–phenanthroline systems

The CdSe quantum dots (QDs) modified by mercapto-β-cyclodextrin (CD) were synthesized and characterized by transmission electron microscopy, powder X-ray diffraction, excitation and emission spectra, and fluorescence lifetime. When λ_ex = 370 nm, the fluorescence peak of CdSe/CD QDs is at 525 nm. Phenanthroline (Phen) is able to quench their fluorescence, which can be recovered by the addition of DNA. The quenching and restoration of fluorescence intensity were found to be linearly proportional to the amount of Phen and DNA, respectively. The variation of the fluorescence intensity of the CdSe/CD QDs–Phen system was studied, and it was demonstrated to result from a static mechanism due to the formation of a Phen inclusion complex with the CdSe QDs modified by mercapto-β-cyclodextrin. The fluorescence recovery was due to the binding of DNA with Phen in the inclusion complex, leading to the freeing of the CdSe/CD QDs. The binding constants and sizes of the binding sites of the Phen–DNA interaction were calculated to be 1.33 × 10⁷ mol^?1 L and 10.79 bp.     

Fluorescence and DNA-binding spectral studies of neodymium(III) complex containing 2,2′-bipyridine, [Nd(bpy)2Cl3·OH2]

The interaction of [Nd(bpy)₂Cl₃·OH₂], where bipy is 2,2′-bipyridine, with DNA has been studied by absorption, emission, and viscosity measurements. [Nd(bpy)₂Cl₃·OH₂] showed absorption decreasing in charge transfer band with increasing of DNA. The binding constant, K_b has been determined by absorption measurement and found to be (1.5 ± 0.1) × 10⁵ M^?1. The fluorescent of [Nd(bpy)₂Cl₃·OH₂] has been investigated in detail. The interaction was also studied by fluorescence quenching technique. The results of fluorescence titration revealed that DNA had the strong ability to quenching the intrinsic fluorescence of Nd(III) complex at 327 nm. The binding site number n, apparent binding constant K_b and the Stern–Volmer quenching constant K_SV have been determined. Thermodynamic parameters have been calculated according to relevant fluorescent data and Van’t Hoff equation. Characterization of bonding mode has been studied. The results suggested that the major interaction mode between [Nd(bpy)₂Cl₃·OH₂] and DNA was groove binding.     

Study on β-cyclodextrin inclusion of Zn(II) aromatic complex and its analytical application

A new β-cyclodextrin (β-CD) inclusion compound Zn(2H1NA)₂·2β-CD (2H1NA = 2-hydroxy-1-naphthoic acid) was prepared. The structure was characterized by ¹H NMR, IR, the fluorescence spectra, thermogravimetric analysis (TG–DTA) and elementary analysis. Meanwhile, the mechanism of the formation of the supramolecular system (2H1NA:Zn(II):β-CD) was studied and discussed by spectrofluorimetry. The results showed that the naphthalene rings of the Zn(II) aromatic complex Zn(2H1NA)₂ were encapsulated within the β-CD's cavity to form a 2:1 stoichiometry host–guest compound. The inclusion constant calculated was 1.27 × 10⁴ (L/mol)². A spectrofluorimetric method for the determination of 2H1NA in bulk aqueous solution in the presence of β-CD was developed based on the great enhancement of the fluorescence intensity of 2H1NA. The linear relationship was obtained in the range of 9.00 × 10^?7 to 2.50 × 10^?5 mol/L and the detection limit was 8.00 × 10^?7 mol/L. The proposed method was successfully applied to determine 2H1NA in waste water with recoveries of 97–104%.     

Thermodynamic studies for aqueous solutions involving 18-crown-6 and alkali bromides at 298.15 K

Osmotic vapor pressure measurements have been carried out for three ternary systems, H₂O + 0.2 m 18-crown-6 + NaBr, H₂O + 0.2 m 18-crown-6 + KBr and H₂O + 0.2 m 18-crown-6 + CsBr at 298.15 K using vapor pressure osmometry. The concentration of salts was varied between 0.04 and 0.6 m. The measured water activities were used to calculate the activity coefficient of water, 18-crown-6 and mean molal activity coefficients of ions. The lowering of activity coefficients of one component in presence of other is attributed to the existence of host–guest type complex equilibria in solution phase. The Gibbs transfer free energies, which have been calculated using the activity data, were used to estimate the McMillan–Mayer pair and triplet interaction parameters and are compared with that of alkali chlorides reported recently by us using similar studies. The pair interaction parameters, g_NE (non-electrolyte–electrolyte interaction coefficient), are used to obtain the thermodynamic equilibrium constant values for 18-crown-6:M⁺ complexes, which on comparison with alkali chlorides indicate that the counter anions plays a definite role in stabilizing such complexes in solution phase. Sign and the magnitude of triplet interaction parameters (g_NNE or g_NEE) show that along with electrostatic interactions hydrophobic effects also play an important role in stabilizing the host–guest type complexes.     

Gas–liquid partitioning of halogenated volatile organic compounds in aqueous cyclodextrin solutions

Gas–liquid partitioning coefficients (K_GL) were measured for halogenated volatile organic compounds (VOCs), namely 1-chlorobutane, methoxyflurane, pentafluoropropan-1-ol, heptafluorobutan-1-ol, α,α,α-trifluorotoluene, and toluene in aqueous solutions of natural α-, β-, and γ-cyclodextrins (CDs) at temperatures from (273.35 to 326.35) K employing the techniques of headspace gas chromatography and inert gas stripping. The binding constants of the 1:1 inclusion complex formation between the VOCs and CDs were evaluated from the depression of the VOCs volatility as a function of CD concentration. The host–guest size matching and the hydrophobic interaction concept were used to rationalize the observed widely different affinity of the VOC–CD pairs to form the inclusion complex. The enthalpic and entropic component of the standard Gibbs free energy of complex formation as derived from the temperature dependence of the binding constant indicate the thermodynamic origin of the binding to vary greatly among the systems studied, but follow the global enthalpy–entropy compensation relationships reported previously in the literature.     

UV-absorption and fluorimetric methods for the determination of alprazolam in pharmaceutical formulation

The development of UV and fluorescence spectrophotometric methods for the quantitative determination of alprazolam in dosage forms using As(III)?SDS system. The two simple and sensitive, spectrophotometric and spectrofluorimetric methods were developed for the determination of alprazolam (ALP) in tablets. These methods are based on formation of ALP?As(III) complex in the presence of SDS. The UV-spectrum of 30% methanolic solution of ALP (5 × 10^?5 M) at pH 6.5 (Mclivaine buffer) was run between 200 and 380 nm. The absorption spectrum of ALP exhibits two peaks with a λ_max. at 255 nm and a weak band at 325 nm. When the spectra of the drug were run at varying pH in the region 200–380 nm, one isosbestic point at 290 nm was observed, which indicated the presence of two ionic conditions in solution. The complex exhibited an absorption maximum at 265 nm and emission peak at 520 nm with respect to the excitation wavelength of 325 nm. The spectrophotometric method was found to be linear in 8.0–17.0 μg ml^?1 range with detection limit of 13.520 μg ml^?1, while 0.05–9.5 μg ml^?1 range was with detection limit of 1.048 × 10^?2 μg ml^?1 by spectrofluorimetric method. The mean percentage recovery of the added quantity was found to be 99.54 (spectrophotometric method) and 100.22 (spectrofluorimetric method) and the %RSD are lower than 0.478 and 0.296 determined spectrophotomerically and spectrofluorimtrically, respectively. This indicates that the proposed method is accurate. The apparent ionization constant of ALP was found to be 9.29. The spectra, experimental conditions were set followed by determination stoichiometry, stability constant and thermodynamic parameters of the As(III), Co(II), Ni(II), and Zn(II) complexes with ALP at pH 6.5. The proposed methods have been successfully applied to the assay of ALP in tablets and the results were statistically evaluated.     

A new use for an old molecule: N-phenyl-2-(2-hydroxynaphthalen-1-ylmethylene)hydrazinecarbothioamide as a ratiometric ‘Off–On’ fluorescent probe for iron

N-Phenyl-2-(2-hydroxynaphthalen-1-ylmethylene)hydrazinecarbothioamide has been investigated as a fluorescent sensor for the determination of Fe(III) in aqueous solutions. The probe was prepared by the facile Schiff base condensation of 2-hydroxy-1-napthaldehyde with N-phenylhydrazinecarbothioamide. The sensor displayed good selectivity for Fe(III) when tested against a range of biologically and environmentally important cations. A concentration dependent increase in the emission of two fluorescent bands at 425 and 495 nm was observed upon increasing Fe(III) addition resulting in a linear ratiometric response in the 17–37 μM range. The binding stoichiometry was confirmed as 1:1 (host/guest) with the binding constant (log β) calculated as 4.56.     

Studies on the interaction between imidacloprid and human serum albumin: Spectroscopic approach

The interaction between imidacloprid (IMI) and human serum albumin (HSA) was investigated using fluorescence and UV/vis absorption spectroscopy. The experimental results showed that the fluorescence quenching of HSA by IMI was a result of the formation of IMI–HSA complex; static quenching was confirmed to result in the fluorescence quenching. The apparent binding constant K_A between IMI and HSA at three differences were obtained to be 1.51 × 10⁴, 1.58 × 10⁴, and 2.19 × 10⁴ L mol^?1, respectively. The thermodynamic parameters, ΔH° and ΔS° were estimated to be 28.44 kJ mol^?1, 174.76 J mol^?1 K^?1 according to the van’t Hoff equation. Hydrophobic interactions played a major role in stabilizing the complex. The distance r between donor (HSA) and acceptor (IMI) was obtained according to fluorescence resonance energy transfer. The effect of IMI on the conformation of HSA was analyzed using synchronous fluorescence spectroscopy CD and three-dimensional fluorescence spectra, the environment around Trp and Tyr residues were altered.     

Optical and dielectric properties of isothermally crystallized nano-KNbO3 in Er3+-doped K2O–Nb2O5–SiO2 glasses

Precursor glass of composition 25K₂O–25Nb₂O₅–50SiO₂ (mol%) doped with Er₂O₃ (0.5 wt% in excess) was isothermally crystallized at 800 °C for 0–100 h to obtain transparent KNbO₃ nanostructured glass–ceramics. XRD, FESEM, TEM, FTIRRS, dielectric constant, refractive index, absorption and fluorescence measurements were carried out to analyze the morphology, dielectric, structure and optical properties of the glass–ceramics. The crystallite size of KNbO₃ estimated from XRD and TEM is found to vary in the range 7–23 nm. A steep rise in the dielectric constant of glass–ceramics with heat-treatment time reveals the formation of ferroelectric nanocrystalline KNbO₃ phase. The measured visible photoluminescence spectra have exhibited green emission transitions of ²H_11/2, ⁴S_3/2 → ⁴I_15/2 upon excitation at 377 nm (⁴I_15/2 → ⁴G_11/2) absorption band of Er³⁺ ions. The near infrared (NIR) emission transition ⁴I_13/2 → ⁴I_15/2 is detected around 1550 nm on excitation at 980 nm (⁴I_15/2 → ⁴I_11/2) of absorption bands of Er³⁺ ions. It is observed that photoluminescent intensity at 526 nm (²H_11/2 → ⁴I_15/2), 550 nm (⁴S_3/2 → ⁴I_15/2) and 1550 nm (⁴I_13/2 → ⁴I_15/2) initially decrease and then gradually increase with increase in heat-treatment time. The measured lifetime (τ_f) of the ⁴I_13/2 → ⁴I_15/2 transition also possesses a similar trend. The measured absorption and fluorescence spectra reveal that the Er³⁺ ions gradually enter into the KNbO₃ nanocrystals.     

Binding of the bioflavonoid robinetin with model membranes and hemoglobin: Inhibition of lipid peroxidation and protein glycosylation

Recent years have witnessed burgeoning interest in plant flavonoids as novel therapeutic drugs targeting cellular membranes and proteins. Motivated by this scenario, we explored the binding of robinetin (3,7,3′,4′,5′-pentahydroxyflavone, a bioflavonoid with remarkable ‘two color’ intrinsic fluorescence properties), with egg yolk phosphatidylcholine (EYPC) liposomes and normal human hemoglobin (HbA), using steady state and time resolved fluorescence spectroscopy. Distinctive fluorescence signatures obtained for robinetin indicate its partitioning (K_p = 8.65 × 10⁴) into the hydrophobic core of the membrane lipid bilayer. HbA–robinetin interaction was examined using both robinetin fluorescence and flavonoid-induced quenching of the protein tryptophan fluorescence. Specific interaction with HbA was confirmed from three lines of evidence: (a) bimolecular quenching constant K_q ? diffusion controlled limit; (b) closely matched values of Stern–Volmer quenching constant and binding constant; (c) τ₀/τ = 1 (where τ₀ and τ are the unquenched and quenched tryptophan fluorescence lifetimes, respectively). Absorption spectrophotometric assays reveal that robinetin inhibits EYPC membrane lipid peroxidation and HbA glycosylation with high efficiency.     

Fluorescence studies on the interaction of hydrophobic ligands with Momordica charantia (bitter gourd) seed lectin

The interaction of Momordica charantia (bitter gourd) seed lectin (MCL) with several nucleic acid bases has been investigated by monitoring changes induced in the protein fluorescence by ligand binding. Values of the binding constant, K_a were obtained as 1.1 × 10⁴, 1.56 × 10⁴ and 2.2 × 10³ M^?1 for adenine, cytosine and uracil, respectively. In addition, binding of 8-anilinonaphthalene 1-sulfonate (ANS) with MCL was investigated by fluorescence spectroscopy. Interaction with MCL at low pH results in a large enhancement of the fluorescence intensity of ANS with a concomitant blue shift in the emission λ_max, whereas at neutral and basic pH changes in both fluorescence intensity and emission maximum were very small, clearly suggesting that the MCL–ANS interaction is stronger at lower pH values. When excited at 295 nm in the presence of ANS, the protein fluorescence decreased with a concomitant increase in the emission intensity of ANS, suggesting resonance energy transfer from the tryptophan residues of MCL to ANS. Gel filtration profiles of MCL at pH values 2.0 and 7.4 are similar indicating that the tetrameric nature of MCL is retained even at low pH. Addition of lactose or adenine to MCL–ANS mixture did not alter the change in ANS fluorescence suggesting that lactose, adenine and ANS bind to MCL at independent and non-interacting sites. These results are relevant to understanding the functional role of MCL in the parent tissue.     

Absorption and emission spectroscopic characterisation of the LOV2-His domain of phot from Chlamydomonas reinhardtii

The absorption and emission behaviour of flavin mononucleotide (FMN) in the wild-type light, oxygen and voltage sensitive domain LOV2 of the photoreceptor phot from the green alga Chlamydomonas reinhardtii is studied. Actually a LOV2-His protein (LOV2 domain bound at N-terminal to 15 His aminoacids via a Gly aminoacid) expressed in an Escherichia coli strain is investigated. For fresh samples stored in the dark an initial fluorescence quantum yield of ϕ_F = 0.12 ± 0.01 and an effective fluorescence lifetime of τ_F = 2.4 ± 0.1 ns are determined. Blue-light photo-excitation generates an intermediate photoproduct (flavin-C(4a)-cysteinyl adduct with absorption peak at 390 nm) resulting in an intensity-dependent fluorescence quenching. In the aqueous solutions at pH 8 approximately 3.8% of the FMN molecules are not bound to the protein binding pocket, whereas 96.2% are non-covalently bound. Even at high-intensity light excitation at 428 nm a fraction of about 7% of the non-covalently bound FMN remains non-converted to an FMN-Cys adduct because of photo-induced back-relaxation of the adduct to non-covalently bound FMN. Two holo-LOV2-His conformations with different adduct recovery time constants are revealed by spectrally and temporally resolved fluorescence and absorption measurements: A fraction of about 48% forms FMN-Cys adducts with a fast recovery time constant of τ_Ad,f = 19 ± 2 s in the dark, and the rest forms adducts with a slow recovery time constant of τ_F,s = 5.5 ± 1 min. Prolonged blue light irradiation of the flavin-C(4a)-cysteinyl adducts reduces their ability to recover back in the dark to non-covalently bound FMN (photo-induced permanent adduct formation). Numerical simulations of the intensity-dependent absorption depletion reveals a quantum yield of intermediate photo-adduct formation of ϕ_Ad = 0.9 ± 0.1. Simulation of the adduct absorption dynamics gives a quantum yield of photo-induced adduct back-relaxation of ϕ_Ad,b = 0.15 ± 0.01 and a quantum yield of photo-induced permanent adduct formation of ϕ_Ad,p = (2.6 ± 0.5) × 10⁻⁴.     

Supramolecular array of imizazolylethynyl-zinc-porphyrin

Novel imidazolylethynyl-zinc-porphyrin 1a and its meso,meso-linked bisporphyrin 5M were synthesized effectively by the reaction of the corresponding bromoporphyrins and 2-imidazolylethyne in the presence of palladium-arsenic catalyst. The complementary coordination of monomer 1a into dimer 2a was observed by ¹H NMR and UV–Vis spectroscopy. Self-association constant of 1a to 2a in CHCl₃ (including 0.5% ethanol) was determined as 1.84 × 10⁷ M⁻¹ by UV–Vis titration of 2a with N-methylimidazole. UV–Vis absorption and fluorescence spectra of 1a, 2a, monomer 5M, and its polymer 5P were compared.     

The synthesis,X-ray crystal structure and optical properties of novel 1,3,5-triaryl pyrazoline derivatives

A series of novel 1,3,5-triaryl pyrazoline derivatives has been synthesized by the reaction of chalcone and 3-chloro-6-hydrazinylpyridazine in 47–82% yields. The structures of compounds obtained were determined by IR, ¹H NMR and HRMS spectra. Representatively, the spatial structure of compound 3d was determined by using X-ray diffraction analysis. Absorption and fluorescence spectral characteristics of the compounds were investigated in CHCl₃ by UV–vis absorption and emission spectra. The results showed that the absorption maxima of the compounds vary from 332 to 342 nm depending on the group bonded to benzene rings. The maximum emission spectra of compounds in CHCl₃ are dependent on groups in benzene ring in which a strong electron-donating group in benzene ring such as methoxyl group on C3 position of pyrazoline made the emission wavelength of 3e, 3f and 3g red shifted than that of compounds 3b, 3c and 3d with chlorine group. The intensity of absorption and fluorescence was also correlated with substituent on two aryl rings. In addition, the absorption spectra of these compounds change very little with increasing solvent polarity.     

Synthesis of ZnS nanoparticles from pyridine adducts of zinc(II) dithiocarbamates

Zn(thqdtc)₂, Zn(thqdtc)₂(py) and Zn(thiqdtc)₂(py) (where thqdtc = 1,2,3,4-tetrahydroquinolinecarbodithioate, thiqdtc = 1,2,3,4-tetrahydroisoquinolinecarbodithioate and py = pyridine) have been used as single source precursors for the synthesis of ZnS nanoparticles. The formation of ZnS nanoparticles was achieved by thermal decomposition of the complex under heating in presence of triethylenetetraamine. Transmission electron microscopy, energy dispersive X-ray analysis (EDAX) and powder X-ray diffraction studies were carried out to study the structure and morphology of the nanoparticles. The optical properties of the ZnS nanoparticles were studied by UV–visible and fluorescence emission spectral studies. UV–visible absorption spectral studies indicate a blue shift in the absorption maxima due to the quantum size effect. A single crystal X-ray analysis was carried out for a precursor [Zn(thqdtc)₂].     

Vacuum ultraviolet spectroscopic properties of rare earth (RE) (RE = Eu,Tb, Dy,Sm, Tm)-doped K2GdZr(PO4)3 phosphate

The luminescent characteristics of RE (RE³⁺ = Eu, Tb, Dy, Sm and Tm)-doped K₂GdZr(PO₄)₃ have been investigated. The band in the range of 130–157 nm in the VUV excitation spectra of these compounds is attributed to the host lattice or PO₄^3? group absorption and the band from 157 nm to 215 nm with the maximum at 188 nm is due to the O–Zr charge transfer transition. For Eu³⁺-doped sample, the relatively weak band of O^2?–Eu³⁺ charge transfer (CTB) at 222 nm is observed and for Tb³⁺-doped sample, the band at 223 nm is related to the 4f–5d spin-allowed transition of Tb³⁺. For Dy³⁺- and Sm³⁺-doped samples, the O^2?–Dy³⁺ and O^2?–Sm³⁺ CTBs have not been observed, probably due to the 2p electrons of oxygen tightly bound to the zirconium ion in the host lattice. In Tm³⁺-doped sample, the weak O^2?–Tm³⁺ CTB is located at 170 nm. It is observed that there is energy transfer between the host and the luminescent activators (e.g. Eu³⁺, Tb³⁺ and Sm³⁺) except for Tm³⁺.     

Synthesis and laser application of the dithiolene nickel complex compounds

A series of dithiolene nickel complex compounds with a general formula (RCSCSR′)₂Ni that have an intense absorption band in near-IR region were successfully synthesized and the maximum IR absorption wavelengths of these dyes vary from 875 to 1495 nm in different solvents. Their characteristics of Q-switching and mode-locking for different lasers were investigated. Q-switched 1064 and 1079 nm laser with a polymer film or organic solution work satisfactorily and the pulse widths are 4–10 ns. The dyes in a variety of solutions show excellent properties in mode-locking the 1079 nm laser, particularly in mode-locking the 1340 nm laser. The pulse widths are 90–120 ps. The experimental results show that the choice of different ring substitutes and solvents will greatly influence the corresponding dye laser properties. It is also implied that BDN16 and BDN17 as the mode-locking dyes for the 1500 nm laser are satisfactory.     

Synthesis and characterization of highly-active nickel and lanthanum co-doped SrTiO3

A series of highly-active nickel and lanthanum co-doped SrTiO₃ photocatalysts were synthesized via sol–gel process and their photocatalytic activities were evaluated by degradation of methylene blue (MB). The obtained samples were found by XRD, XPS and UV–vis to have a perovskite structure in which Ni and La atoms were incorporated into SrTiO₃. After Ni and La doped into SrTiO₃, the absorption edge of SrTiO₃ powder was greatly shifted from 380 nm to 700 nm. Under a 100 W incandescent lamp irradiating for 14 h, a 100% of MB was degraded, which is much higher than those of pure SrTiO₃ and commercial Degussa P25. The optimal range of Ni and La dopants is 0.1–1.0 mol%. The formation of a new absorption edge and the large surface area may be the main reasons for the high activity.     

A new luminescent sulfate bridged dimeric copper(II) complex with DNA binding and SO2 fixation ability: Synthesis and structure

New luminescent mononuclear and dinuclear copper(II) (S = 1/2) complexes [Cu(HL)(H₂O)₂](ClO₄)₂ (1a) and [Cu₂(HL)₂(μ-SO₄)₂]·2H₂O (1b) were synthesized with the acyclic tridentate pyridine-2-carboxaldehyde-2-pyridylhydrazone ligand, HL (1). Interestingly, the mononuclear complex 1a can be converted into the disulfate bridged dimeric copper(II) complex 1b by passing freshly prepared SO₂ through the basic medium. On excitation at 290 nm, the ligand fluoresces at 364 nm due to an intraligand ¹(π–π1) transition. Upon complexation with copper(II), the emission peak is slightly blue shifted (356 nm, F/F₀ 0.76 for 1a and 354 nm, F/F₀ 0.89 for 1b) with a little quenching in the emission intensity. The association constants (K_ass (5.06 ± 0.004) × 10⁴ for 1a and K_ass (5.46 ± 0.006) × 10⁴ for 1b at 298 K) and the thermodynamic parameters have been determined by UV–Vis spectroscopy. The molecular structure of the complex 1b (Cu?Cu 4.456 Å) has been determined by single crystal X-ray diffraction studies. The complex 1b exhibits a strong interaction towards DNA as revealed from the K_b (intrinsic binding constant) 6.3 × 10⁴ M^?1 and K_sv (Stern–Volmer quenching constant) 2.93 values.