Infrared spectroscopic and DFT investigations of the vanadate–tellurate glasses structures

Vanadate–tellurate vitreous systems with composition (1 ? x)TeO₂·xV₂O₅ where x = 0.3 and 0.4 have been prepared by the conventional melt-quench method. The structural aspects have been investigated using FTIR spectroscopy and the density functional theory (DFT) calculations.The present study provides the interesting information concerning devitrification behavior of the vanadate–tellurate vitreous system which occur Te₂V₂O₉ crystalline phase. The structure of the heat-treated glasses was found to consist mainly of rings containing [TeO₃], [TeO₄], [VO₄] and some [VO₅] structural units.     

The role of ligand coordination on the spectral features of Yb3+ ions in lead aluminum silicate glasses

The glasses of the composition (40 ? x)PbO–(5 + x)Al₂O₃–54SiO₂:1.0Yb₂O₃ (in mol%) with x ranging from 5 to 10 have been synthesized. The IR spectral studies of these glasses have indicated that there is a gradual transformation of Al³⁺ ions from tetrahedral to octahedral coordination with increase of Al₂O₃ content in the glass network. The optical absorption and luminescence spectra have exhibited bands originating from ²F_7/2 → ²F_5/2 and ²F_5/2 → ²F_7/2 transitions, respectively. From these spectra, the absorption and emission cross-sections and fluorescence lifetime of Yb³⁺ ions have been evaluated. Quantitative analysis of these data indicated a decreasing radiative trapping and increasing fluorescence lifetime of Yb³⁺ ions with increasing Al₂O₃ content. This may be explained by structural variations in the vicinity of Yb³⁺ ions due to variation in the concentration of Al₂O₃ in the glass network.     

Nb2O5 nanobelts: A lithium intercalation host with large capacity and high rate capability

In this study, Nb₂O₅ nanobelts, with a ca. ∼15 nm in thickness, ca. ∼60 nm in width and several tens of mircrometers in length, have first been used as the electrode material for lithium intercalation over the potential window of 3.0–1.2 V (vs. Li⁺/Li). It delivers an initial intercalation capacity of 250 mA hg⁻¹ at 0.1 Ag⁻¹ current density, corresponding to x = 2.5 for L_xNb₂O₅, and can still keep relative stable and reaches as large as 180 mA hg⁻¹ after 50 cycles. Surprisingly, the electrodes composed of Nb₂O₅ nanobelts can work smoothly even at high current density of 10 Ag⁻¹, and shows higher specific capacity and excellent cycling stable, as well as sloped feature in voltage profile. Cycling test indicates Nb₂O₅ nanobelts electrode shows a high reversible charge/discharge capacity, high rate capability with excellent cycling stability.     

Raman spectroscopic study of CuO–V2O5–P2O5–CaO glass system

In order to evidence the structural changes induced by CuO and V₂O₅ in the phosphate glass network and their modifier or former role, x(CuO·V₂O₅)(100 − x)[P₂O₅·CaO] glass system was prepared and investigated using Raman spectroscopy (0 ≤ x ≤ 40 mol%).Raman spectra of the studied glasses present the specific bands of the phosphate glasses at low concentration of transition metal (TM) ions, but at higher concentration (x > 7 mol%) a strong depolymerization of the phosphate network appears; non-bridging oxygen atoms are involved in VOP and CuOP bonds and new short units are formed. For a high concentration of V₂O₅ (x > 10 mol%) the Raman bands of V₂O₅ prevail in the spectra; this fact suggests that vanadium oxide imposes its structural units in the network acting thus as a network glass former.2D correlation analysis was also applied for the concentration-dependent Raman spectra in order to verify the assignments of the vibration modes and to find correlations in the changes induced by TM ions content. 2D correlation maps indicate a good correlation between the bands at ∼705 cm⁻¹ assigned to POP stretching vibration and at ∼1175 cm⁻¹ assigned to PO₂ groups which suggest the depolymerization of the phosphate network. The correlation between the 1270 cm⁻¹ and 930 cm⁻¹ bands also suggests that V₂O₅ oxide is responsible for PO bonds breaking and POV formation.     

Redox behavior and transport properties of La0.5−2xCexSr0.5+xFeO3−δ and La0.5−2ySr0.5+2yFe1−yNbyO3−δ perovskites

The effects of doping the mixed-conducting (La,Sr)FeO_3−δ system with Ce and Nb have been examined for the solid-solution series, La_0.5−2xCe_xSr_0.5+xFeO_3−δ (x = 0–0.20) and La_0.5−2ySr_0.5+2yFe_1−yNb_yO_3−δ (y = 0.05–0.10). Mössbauer spectroscopy at 4.1 and 297 K showed that Ce⁴⁺ and Nb⁵⁺ incorporation suppresses delocalization of p-type electronic charge carriers, whilst oxygen nonstoichiometry of the Ce-containing materials increases. Similar behavior was observed for La_0.3Sr_0.7Fe_0.90Nb_0.10O_3−δ at 923–1223 K by coulometric titration and thermogravimetry. High-temperature transport properties were studied with Faradaic efficiency (FE), oxygen-permeation, thermopower and total-conductivity measurements in the oxygen partial pressure range 10⁻⁵–0.5 atm. The hole conductivity is lower for the Ce- and Nb-containing perovskites, primarily as a result of the lower Fe⁴⁺ concentration. Both dopants decrease oxide-ion conductivity but the effect of Nb-doping on ionic transport is moderate and ion-transference numbers are higher with respect to the Nb-free parent phase, 2.2 × 10⁻³ for La_0.3Sr_0.7Fe_0.9Nb_0.1O_3−δ cf. 1.3 × 10⁻³ for La_0.5Sr_0.5FeO_3−δ at 1223 K and atmospheric oxygen pressure. The average thermal expansion coefficients calculated from dilatometric data decrease on doping, varying in the range (19.0–21.2) × 10⁻⁶ K⁻¹ at 780–1080 K.     

Spectroscopic properties of RBiBO4 (R = Ca,Sr) glasses doped with TiO2

Transparent glasses, melt quenching derived, containing 10RO·20Bi₂O₃·(70 ? x)B₂O₃·xTiO₂ [R = Ca, Sr] with x = 0, 0.5, 1.0 wt% were characterized by X-ray powder diffraction. Physical and spectroscopic properties viz., density, absorption, emission, electron paramagnetic resonance (EPR) and FTIR were investigated. The absorption band around 823 nm in pure glass samples is attributed to the electronic transition of ³P₀ to ³P₂ of Bi⁺ radicals. A small absorption hump centered around 609 nm is found in all doped glasses due to ²T_2g to ²E_g transition of octahedral Ti³⁺ ions. The emission results revealed that all the samples exhibit a broad emission band covering entire visible-light range, with λ_ex = 360 nm, centered 470–520 nm corresponds to electronic transition of ³P₁ to ¹S₀ of Bi³⁺ ions, therefore the present materials can be potentially used as tunable or full-color display systems. And a strong emission around 706 nm with λ_ex = 514 nm due to transition of ²P_3/2 to ²P_1/2 of Bi²⁺ ions. In SrO mixed glasses Ti⁴⁺ ions effect the environment of Bi³⁺ ion symmetry units from C₂ to C_3i. A small EPR signal (at room temperature) is observed in titanium doped glasses due to Ti³⁺ ions. In both the series with increase of TiO₂ concentration BO₄ units are gradually converted into BO₃ units and new cross linkages are formed, like B–O–Ti, Bi–O–Ti at the expense of B–O–B bonds.     

Photo-luminescence studies of strontium barium niobate crystals doped with Cr3+ ions

This paper reports the photo-luminescence spectroscopic results of Strontium–Barium–Niobate, Sr_x,Ba_1−xNb₂O₅ (SBN, x = 0.61 for near congruent composition) crystals doped with Cr₂O, at cryogenic temperature (20 K). The experimental results reveal the need of re-assignment of the Cr³⁺ ions defect centres in this material. For first time, a broad emission band in the near infrared region centred at ca. 950 nm is reported. This emission band has micro-seconds decaytime constant and a FWHM band-width > 1700 cm⁻¹ and has been ascribed to the vibronically assisted ⁴T₂ → ⁴A₂ transition. A much narrower emission band centred at ca. 764 nm with milli-seconds decaytime constant and a FWHM band-width of ca. 170 cm⁻¹ is correlated to the ²E → ⁴A₂ radiative transition (R-line).     

Luminescence properties of yttrium gadolinium orthovanadate nanophosphors and efficient energy transfer from VO43− to Sm3+ via Gd3+ ions

In this paper, luminescence properties of orthovanadates, Y_1−x−yGd_xVO₄:ySm³⁺ (where x = 0.05–0.50, y = 0.01–0.05), and the energy transfer mechanism from VO₄³⁻ to Sm³⁺ via Gd³⁺ ions were investigated in detail. X-ray diffraction (XRD) analysis confirmed the crystalline phase for synthesized nanophosphor in a tetragonal structure with I41/amd space group. The average crystallite size estimated from XRD was ∼28 nm. Field-emission scanning electron microscopy coupled with energy dispersive X-ray analysis revealed oval shaped morphology and composition of the nanophosphor, respectively. From high-resolution transmission electron microscopy observations, the particle sizes were found to be in the range 10–80 nm. The photoluminescence studies of Y_0.77Gd_0.20VO₄:0.03Sm³⁺ nanophosphor under 311 nm excitation exhibits dominant emission peak at 598 nm corresponding to ⁴G_5/2 → ⁶H_7/2 transition. The energy transfer occurs from VO₄³⁻ to Sm³⁺ via Gd³⁺ ions was confirmed by applying Dexter and Reisfeld’s theory and Inokuti-Hirayama model. Moreover, the energy transfer efficiencies and probabilities were calculated from the decay curves. Furthermore, Commission Internationale de l’Eclairage (CIE) color coordinate (0.59, 0.37) has been observed to be in the orange-red (598 nm) region for Y_0.77Gd_0.20VO₄:0.03Sm³⁺ nanophosphor. These results perfectly established the suitability of these nanophosphors in improving the efficiency of silicon solar cells, light emitting diodes, semiconductor photophysics, and nanodevices.     

Spectroscopic investigation and magnetic properties of Na2Pb1−xCuxP2O7 glasses

Phosphate glasses have several technological interests due to their specific physical properties such as high thermal expansion coefficient, high refractive indice and low melting temperature, that make them suitable for use as conductors, ionic conductors, semiconductors and biomedical materials. The phosphate glasses, in particular the pyrophosphate forms, are not widely studied. In this work we have elaborated the Na₂Pb_1−xCu_xP₂O₇ glasses, with a large range of composition (0 ≤ x ≤ 1), by conventional melting method. Thermal parameters of the glasses were determined using the differential scanning calorimetry. The structure of the glasses was investigated by IR spectroscopy. The local environment of paramagnetic ions Cu²⁺ was analyzed by EPR and magnetic measurements. It was showed that the network structure of the glasses was drastically influenced by the copper content.     

Structural and spectroscopic investigations on Eu3+-doped alkali fluoroborate glasses

Eu³⁺-doped alkali fluoroborate glasses B₂O₃–XCO₃–NaF–Eu₂O₃ (where X = Li₂, Na₂, K₂, and Ca, Mg) have been prepared using the conventional melting technique and their structural and optical properties have been evaluated. The XRD pattern of the glasses confirmed the amorphous nature and the FTIR spectra reveal the presence of BO₃ and BO₄ units as their local structures along with the strong OH^? groups. From the absorption spectra the bonding parameters have been calculated and confirmed that the Eu–O bonds in the studied glasses are of covalent nature. Judd–Ofelt (JO) analysis has been carried out from the emission spectra. The JO parameters have been used to calculate transition probabilities (A), lifetime (τ_R) and branching ratios (β_R) and peak stimulated emission cross-section (σ_P^E) for the ⁵D₀ → ⁷F_J (J = 1, 2, 3 and 4) transitions of the Eu³⁺ ions. The decay from the ⁵D₀ level of Eu³⁺ ions in the title glasses has been measured and analysed. The lifetime of the ⁵D₀ level is found to be shorter than the reported glasses which may be due to the presence of OH^? groups.     

Dual role of the six-coordinated molybdenum and lead ions in novel of photochromic properties of the molybdenum–lead–borate glasses

Transparent glasses were prepared by conventional melting–quenching method in the xMoO₃·(100 ? x)[3B₂O₃·PbO] system where 0 ≤ x ≤ 15 mol%. By increasing the MoO₃ content up to 20 mol% the PbMoO₄ crystalline phase appears. These systems exhibit a photochromic effect which can be induced through laser exposures (λ = 633 nm) directly on the bulk sample. Structural investigations by FTIR spectroscopy show that the photosensitive effect is due to a reduction of Mo⁶⁺ to Mo⁴⁺ and/or Mo⁵⁺ promoted by the oxidation of Pb²⁺ and some structural changes of the borate network.     

Li(4−x)/3Ti(5−2x)/3CrxO4 (0 ≤ x ≤ 0.9) spinels: New negatives for lithium batteries

Members of the spinel solid solution between Li_4/3Ti_5/3O₄ and LiCrTiO₄, i.e., Li_(4−x)/3Ti_(5−2x)/3Cr_xO₄ (0 ≤ x ≤ 0.9), have been investigated as possible negative electrodes for future lithium-ion batteries. Electrochemical behaviour have been studied over the potential range 1–3.5 V vs Li⁺/Li. Results are promising with anodic capacities between 129 and 163 mA h/g with a flat operating voltage at about 1.5 V, which is attributed to the pair Ti⁴⁺/Ti³⁺. The inclusion of Cr³⁺ in the spinel structure enhances the specific capacity. In-situ X-ray diffraction experiments confirm that the reaction proceeds in a topotactic manner.     

A Ca substitution study of NaV2O4: High-pressure synthesis of the Na1−xCaxV2O4 solid solution

Ambient pressure CaV₂O₄ and high-pressure NaV₂O₄ crystallize in the CaFe₂O₄ structure type containing double chains of edge-sharing VO₆ octahedra. Recent measurements on NaV₂O₄ reveal low-dimensional metallicity and evidence of half-metallic ferromagnetism. In contrast, CaV₂O₄ is an antiferromagnetic insulator. To explore the evolution of these ground-state behaviors, we have prepared a series of Ca-doped NaV₂O₄ compounds with the formula Na_1?xCa_xV₂O₄ (x = 0–1) using high-pressure synthesis. Samples at the Na end (x = 0–0.07) show a broad antiferromagnetic transition in the 120–160 K range in accordance with earlier reports. Transport measurements show an insulator–metal transition at x ～ 0.2. Samples with higher Ca concentrations (x = 0.4–0.7) exhibit a metal–insulator transition around 150 K. The results for the Na_1?xCa_xV₂O₄ solid solution is discussed in comparison to existing studies at the Ca- and Na-rich ends.     

The local structure of bismuth germanate glasses and glass ceramics doped with europium ions evidenced by FT-IR spectroscopy

Glasses of the xEu₂O₃·(100 − x)[4Bi₂O₃·GeO₂] system, with 0 ≤ x ≤ 30 mol%, have been characterized by FT-IR spectroscopy measurements in order to obtain information about the influence of Eu₂O₃ on the local structure of the 4Bi₂O₃·GeO₂ glass matrix. FT-IR spectroscopy data suggest that the europium ions play the network modifier role in the studied glasses and both Bi₂O₃ and GeO₂ play the role of network formers. Melting at 1100 °C and the rapid cooling at room temperature permitted to obtain glass samples. In order to improve the local order and to develop crystalline phases the glass samples were kept at 700 °C for 17 h. Both the influences of the europium ions as well as of the heat treatment on the local order of 4Bi₂O₃·GeO₂ glass matrix have been discussed.     

A novel vanadium oxide deposit for the cathode of asymmetric lithium-ion supercapacitors

Hydrous vanadium oxide (denoted as VO_x·yH₂O) deposited at 0.4 V shows promising capacitive behavior in aqueous media containing concentrated Li ions. VO_x·yH₂O annealed in air at 300 °C for 1 h shows highly reversible Li-ion intercalation/de-intercalation behavior with specific capacitance reaching ca. 737 and 606 F g^? 1 at 25 and 500 mV s^? 1 in 12 M LiCl between ?0.2 and 0.8 V. In 14 M LiCl, retention of specific capacitance is about 95% when the scan rate is increased from 25 to 500 mV s^? 1. This work is the first report showing the ultrahigh rate of Li-ion intercalation/de-intercalation in VO_x·yH₂O. A so-called Li-ion supercapacitor of the asymmetric type consisting of a VO_x^.yH₂O cathode and a WO₃^.zH₂O anode is proposed here.     

Influence of redox behavior of copper ions on dielectric and spectroscopic properties of Li2O–MoO3–B2O3: CuO glass system

Li₂O–MoO₃–B₂O₃ glasses mixed with different concentrations of CuO (ranging from 0 to 1.2 mol%) were prepared. The samples were characterized by X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. Optical absorption, luminescence, ESR, IR and dielectric properties (viz., dielectric constant ?′, loss tan δ and a.c. conductivity σ_ac, over a wide range of frequency and temperature) of these glass materials have been investigated. The results of differential scanning calorimetric studies suggest that the glass forming ability is higher for the glasses containing CuO beyond 0.6 mol%. The analysis of results of the dielectric properties has revealed that the glasses possess high insulating strength when the concentration of CuO is >0.6 mol%. The variation of a.c. conductivity with the concentration of CuO passes through a maximum at 0.6 mol%. In the high-temperature region, the a.c. conduction seems to be connected with the mixed conduction viz., electronic conduction and ionic conduction. The optical absorption spectra of these glasses exhibited bands due to Cu⁺ ions in the UV region in addition to the conventional band due to Cu²⁺ ions in the visible region. The ESR spectral studies have indicated that there is a gradual adoption of Cu²⁺ ions from ionic environment to covalent environment as the concentration of CuO increases beyond 0.6 mol% in the glass matrix. The luminescence spectra excited at 271 nm have exhibited an intense yellow emission band centered at about 550 nm and a relatively broad blue emission band at about 450 nm; these bands have been attributed to the ³D₁ → ¹S₀ transition of isolated Cu⁺ ions and ³D₁ → ¹S₀ transition of (Cu⁺)₂ pairs, respectively. The quantitative analysis of the results of all these studies has indicated that as the concentration of CuO is increased beyond 0.6 mol% in the glass matrix, a part of Cu²⁺ ions have been reduced to Cu⁺ ions that have influenced the physical properties of these glasses to a substantial extent.     

Luminescence and dielectric properties of nano-structured Eu3+:K2O–Nb2O5–SiO2 glass-ceramics

In the present study, results concerning luminescence and dielectric properties of Eu₂O₃ (0.5 wt% in excess) doped nano-crystallized KNbO₃ containing transparent glass-ceramics obtained from glass of composition 25K₂O–25Nb₂O₅–50SiO₂ (mol%) by varied heat-treatment duration at 800 °C have been analyzed and reported. The formed crystallization phase, crystallite size and morphology have been examined through XRD, FESEM, TEM and FTIRRS measurements. The observed steep increase in the dielectric constant (?) of glass-ceramics over the as-prepared glass is attributed to the formation of ferroelectric nano-crystalline KNbO₃ in glass matrix. The absorption spectra of all the samples have revealed the characteristic 4f–4f intraband absorption transitions of Eu³⁺ ions. The measured photoluminescence spectra have exhibited emission transitions ⁵D_{0, 1} → ⁷F_j (j = 0, 1, 2, 3 and 4) of Eu³⁺ ions. The excited level lifetimes have been determined from measured fluorescence decay curves. The rare earth ion site symmetry (nearly C_v) has been understood based on the nature of the Stark splittings of emission bands detected in both Eu³⁺: glass and Eu³⁺: glass-ceramics.     

Synthesis,structure, and characterization of a new two-dimensional lead(II) vanadate,Ba3PbV4O14

A new two-dimensional lead(II) vanadate, Ba₃PbV₄O₁₄ has been synthesized by standard solid state techniques using BaCO₃, PbO, and V₂O₅ as reagents. The structure of Ba₃PbV₄O₁₄ was determined by single-crystal X-ray diffraction. Ba₃PbV₄O₁₄ crystallizes in the triclinic space group P-1 (no. 2), with a = 7.2997(15) (Å), b = 7.2932(15) (Å), c = 13.379(3) (Å), α = 93.68(3)°, β = 99.68(3)°, γ = 91.49(3)°, V = 700.2(2) (ų) and Z = 2. Ba₃PbV₄O₁₄ exhibits a novel two-dimensional layered structure consisting of corner shared VO₄ tetrahedra that are linked by edge shared PbO₇ polyhedra, in which the Ba²⁺ cations occupy the interlayer region. The Pb²⁺ cations are in asymmetric coordination environments attributable to its lone pair. Infrared, Raman, and UV–vis diffuse reflectance spectroscopy, thermogravimetric analysis, and dipole moment calculations are also presented.     

Synthesis and characterization of three Cu(II), Zn(II), Cd(II) supramolecular complexes bridged by biphenyl 2,2′-dicarboxylate

Three complexes, M₂(bpy)₂(bpdc)₂·xH₂O [M = Cu, x = 0; M = Zn or Cd, x = 2], have been hydrothermally synthesized by 1,1′-biphenyl-2,2′-dicarboxylic acid (H₂bpdc) with 2,2′-bipyridine (bpy) to form binuclear molecules. In each, the two bpdc groups align the two opposing planar [M(bpy)]²⁺ cations. The molecules are connected by C–H⋯O hydrogen bonds, π–π stacking, and C–H⋯π interactions to form three dimensional supramolecular networks. Furthermore, at room temperature, complex 3 exhibits strong photoluminescence.     

Spin dimer analysis of the magnetic structures of A2V3O9 (A = Ba,Sr) and η-Na9V14O35: Importance of the V4+–O⋯O–V4+ super-superexchange interactions mediated by the O–V5+–O bridges

Spin dimer analysis was carried out for the magnetic oxides of V⁴⁺ (d¹) ions, A₂V₃O₉ (A = Ba, Sr) and η-Na₉V₁₄O₃₅, to account for their magnetic structures. After identifying the V(O_eq)₄ square planes containing the magnetic orbitals of the V⁴⁺ (d¹) ions, we analyzed the relative strengths of the various V–O_eq–V and V–O_eq⋯O_eq–V spin exchange interactions. The V–O_eq⋯O_eq–V spin exchange interactions mediated by O_eq–V⁵⁺–O_eq bridges are found to be crucial in determining the magnetic structures of A₂V₃O₉ (A = Ba, Sr) and η-Na₉V₁₄O₃₅. Our analysis suggests that η-Na₉V₁₄O₃₅ should have two different spin gaps.