Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene. I. 3,3-Dimethyl-1,2-bis(tert-butyl)cyclopropene

The geometrical parameters of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were optimised completely at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* force field was calculated and scaled using Pulay's scaling procedure. The set of 17 scale factors (for a 105-dimensional problem) was compiled from the sets obtained previously for 3,3-dimethyl-1-butene and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The vibrational problem was solved using the scaled quantum mechanical force field (QMFF) and assignments of the vibrational frequencies of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were considered in comparison with the known assignments of 3,3-dimethyl-1-butene and 3,3-dimethylcyclopropene. Assignments of four experimental IR bands of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene given in the literature are suggested.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene III. 3,3-Dimethyl-1-(trimethylsilyl)cyclopropene

The experimental Raman and IR vibrational spectra of 3,3-dimethyl-1-(trimethylsilyl)cyclopropene in the liquid phase were recorded. Total geometry optimisation was carried out at the HF/6-31G* level and the HF/6-31G*//HF/6-31G* force field was computed. This force field was corrected by scale factors determined previously (using Pulay's method) for correction of the HF/6-31G*//HF/6-31G* force fields of 3,3-dimethylbutene-1, 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The theoretical vibrational frequencies calculated from the scaled quantum mechanical force field and the theoretical intensities obtained from the quantum mechanical calculation were used to construct predicted spectra and to perform the vibrational analysis of the experimental spectra.     

The Structure and Thermal Stability of 1,2-Dimethoxycarbonyl-3,3-dimethylcyclopropene

The X-ray crystal structure of 1,2-dimethoxycarbonyl-3,3-dimethylcyclopropene (1) is reported and the geometry is contrasted to that of cyclopropene (2) and 3,3-dimethylcyclopropene (3). Ab initio and density functional theory calculations were carried out in order to examine the conformational preference of the ester groups (i.e., s-cis vs. s-trans) and to probe the thermal stability of 1 via a model compound, 1-methoxycarbonyl-3-methylcyclopropene. Experimental activation parameters for the unimolecular isomerization were measured and compared to an analogous dibenzoylcyclopropene derivative.     

Thermal isomerization of 3,3-dimethylcyclopropene under adiabatic-compression conditions

The thermal isomerization of 3,3-dimethylcyclopropene under adiabatic-compression conditions at 660–850 K occurs in two independent directions with the formation of isopropylacetylene and isoprene; kinetic parameters for each of these routes were obtained. The formation of products of the gem-dimethylvinylcyclopropanation of olefins during their copyrolysis with 3,3-dimethylcyclopropene is not observed, apparently because of the occurrence of isomerization of 3,3-dimethyl-cyclopropene in the gas phase at 660–850 K without the participation of gemdimethylvinylcarbene.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2008–2010, September, 1989.The authors thank A. I. Ioffe and N. V. Volchkov for participation in the discussion of the obtained results.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene IV. 3,3-dimethyl-1,2-bis(trimethylgermyl)cyclopropene

The infrared (IR) and Raman spectra of 3,3-dimethyl-1,2-bis(trimethylgermyl)cyclopropene (I) were measured in the liquid phase. Total geometry optimisation was performed at the HF/6-31G* level. The HF/6-31G*//HF6-31G* quantum mechanical force field (QMFF) was calculated and used to determine the theoretical fundamental vibrational frequencies, their predicted IR intensities, Raman activities, and Raman depolarisation ratios. Using Pulay's scaling method and the theoretical molecular geometry, the QMFF of I was scaled by a set of scaling factors comprised of elements transferred from the sets used to correct the QMFF's of 3,3-dimethylbutene-1, and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene (17 scale factors for a 105-dimensional problem). This set of scale factors was used previously to correct the QMFF of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene and 3,3-dimethyl-1,2-bis(trimethylsilyl)cyclopropene. The scaled QMFF obtained was used to solve the vibrational problem. Differential Raman cross-sections were calculated using the quantum mechanical values of the Raman activities. The appropriate theoretical spectrograms for the Raman and IR spectra of I were constructed. Assignments of the experimental vibrational spectra of I are given. They take into account the calculated potential energy distributions and the correlation between the estimations of the experimental IR and Raman intensities and Raman depolarisation ratios and the corresponding theoretical values calculated using the unscaled QMFF.     

1,3-Dipolar cycloaddition ofin situ generated 2,2-dimethyl-and 2,2-dichlorodiazocyclopropanes to 3,3-dimethylcyclopropene

2,2-Dimethyl- and 2,2-dichlorocyclopropyl-N-nitrosoureas were synthesized for the first time. Under the action of MeONa/MeOH at ?10°C, these compounds generate the corresponding 2,2-dimethyl- and 2,2-dichlorodiazocyclopropanes, which are readily trapped by 3,3-dimethylcyclopropene to give the products of 1,3-dipolar cycloaddition,viz., isomeric substituted spiro(2,3-diazabicyclo[3. 1 .0] hex-2-ene-4,1 ′-cyclopropanes), in yields of about 70%,     

Diastereoselective synthesis of 5,5-disubstituted 3,3-difluorotetrahydrofurans

The diastereoselective synthesis of 5,5-disubstituted 3,3-difluorotetrahydrofurans 2 was achieved using β,β-difluorohomoallylic alcohols 1 as the key starting material in the presence of ICl (3.0?equiv) and tert-BuOK (1.5?equiv) in THF. The corresponding iodocyclization products 2 were obtained in good to moderate yields with excellent diastereo- and regioselectivities (d.r.?=?>20/1, 5-endo-trig only).     

Labelling studies of the ring opening of 1-bromo-2-chloro-3,3-dimethylcyclopropene

1-Bromo-2-chloro-3,3-dimethylcyclopropene reacts with methyl lithium in the presence of 2,3-dimethylbut-2-ene at above ?70°C to give (4); ¹²C labelling shows that C-2 of the cyclopropane becomes the centre carbon of the allene.     

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene. VI: Application of observed trends to stannyl derivatives

The effects of substitution of X = C by Si or Ge in X(CH(3))(3) moieties attached to the formal double bond of 3,3-dimethylcyclopropene are examined. Regularities in observed trends of vibrational frequencies implicating the moieties containing the X atom, as the X atomic mass is increased, are extrapolated to X = Sn. The results of this extrapolation made it possible to assign the known experimental vibrational frequencies of 3,3-dimethyl-1-(trimethylstannyl)cyclopropene and 3,3-dimethyl-1,2-bis(trimethylstannyl)cyclopropene.     

Synthesis of chiral 3,3′-disubstituted 1,1′-binaphthyl-2,2′-disulfonic acids

A convenient synthesis of chiral 3,3′-disubstituted 1,1′-binaphthyl-2,2′-disulfonic acids (BINSA, 1) was developed. The key was directed ortho-lithiation of BINSA methyl ester 2 with n-BuLi and subsequent reaction with an electrophile. Electrophiles such as Br₂, I₂, Me₃SiOTf, and i-PrOB(Pin) reacted smoothly with 3,3′-dilithiated BINSA methyl ester, and the corresponding 3,3′-dihalo-, 3,3′-bis(trimethylsilyl)-, and 3,3′-diboryl-BINSA derivatives were obtained in yields of 21–78%. This simple synthetic method is highly attractive since the ability to prepare 3,3′-disubstituted BINOLs in advance can be useful.     

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, trimethylgermyl, trimethylstannyl, and trimethylplumbyl derivatives of 3,3-dimethylcyclopropene X. Some regularities

The changes in the vibrational frequencies of 1-tert-butyl and 1,2-di-tert-butyl derivatives of 3,3-dimethylcyclopropene brought about by substitution of the central carbon atom (X) of the tert-butyl moieties by Si, Ge, Sn, or Pb atoms are examined. The most important decrease in the vibrational frequencies implicating the X(CH(3))(3) moieties is noted for substitution of X=C by Si. The substitutions of Si by Ge or Ge by Sn or Sn by Pb are not accompanied by the pronounced frequency shifts observed for the C-->Si transition. An explanation is given for trends in these vibrational frequencies for the transitions X=C-->Si-->Ge-->Sn-->Pb. It is concluded that there are lower limiting values of the vibrational frequencies of a molecular moiety which are approached when the mass of its isovalent atom is increased. This leads to the formation of cluster regions in the vibrational spectra for the frequencies of the SnC(3) and PbC(3) moieties.     

Vibrational spectra and ab initio analysis of tert-butyl, trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethyl cyclopropene V. 3,3-dimethyl-1-(trimethylgermyl)cyclopropene

3,3-dimethyl-1-(trimethylgermyl)cyclopropene (I) was synthesised using a standard procedure. The IR and Raman spectra of I in the liquid phase were measured. The molecular geometry of I was optimised completely at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* force field was calculated and scaled using the set of scale factors transferred from those determined previously for scaling the theoretical force fields of 3,3-dimethylbutene-1 and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The assignments of the observed vibrational bands were performed using the theoretical frequencies calculated from the scaled HF/6-31G*//HF/6-31G* force field and the ab initio values of the IR intensities, Raman cross-sections and depolarisation ratios. The theoretical spectra are given. The completely optimised structural parameters of I and its vibrational frequencies are compared with corresponding data of related molecules.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene II. 3,3-Dimethyl-1,2-bis(trimethylsilyl)cyclopropene

The IR and Raman spectra of 3,3-dimethyl-1,2-bis(trimethylsilyl)cyclopropene (I) (synthesised using standard procedures) were measured in the liquid phase. Total geometry optimisation was performed at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* quantum mechanical force field (QMFF) was calculated and used to determine the theoretical fundamental vibrational frequencies, their predicted IR intensities, Raman activities, and Raman depolarisation ratios. Using Pulay's scaling method and the theoretical molecular geometry, the QMFF of I was scaled by a set of scaling factors used previously for 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene (17 scale factors for a 105-dimensional problem). The scaled QMFF obtained was used to solve the vibrational problem. The quantum mechanical values of the Raman activities were converted to differential Raman cross sections. The figures for the experimental and theoretical Raman and IR spectra are presented. Assignments of the experimental vibrational spectra of I are given. They take into account the calculated potential energy distribution and the correlation between the estimations of the experimental IR and Raman intensities and Raman depolarisation ratios and the corresponding theoretical values (including Raman cross sections) calculated using the unscaled QMFF.     

A convenient chromatography-free access to enantiopure 6,6′-di-tert-butyl-1,1′-binaphthalene-2,2′-diol and its 3,3′-dibromo,di-tert-butyl and phosphorus derivatives: utility in asymmetric synthesis

A simple chromatography-free high-yielding synthesis of the hexane-soluble enantiopure 6,6′-di-tert-butyl-1,1′-binaphthalene-2,2′-diol 3 (6,6′-di-tert-butyl BINOL) using Friedel–Crafts reaction on 1,1′-binaphthalene-2,2′-diol 1 (BINOL) is described. The enantiomeric purity was fully maintained in the reaction. Compound 3 has been used as an entry point for the convenient chromatography-free synthesis of 3,3′,6,6′-tetra-tert-butyl BINOL 4 and 3,3′-dibromo-6,6′-di-tert-butyl BINOL 5. A straightforward route to enantiopure bisphosphites [(6,6′-R₂C₂₀H₁₀O₂)P]₂[O₂C₂₀H₁₀-6,6′-R₂] [R = H 15, t-Bu 16] by simply reacting phosphorochloridite (6,6′-R₂C₂₀H₁₀O₂)PCl [R = H 20, t-Bu 6] with metallic sodium is highlighted. The identity of 15 and 16 as their selenium-oxidized products 17 and 18 (at phosphorus center) is confirmed by X-ray crystallography (17 in the enantiopure form and 18 as racemate). Various enantiopure phosphoramidites of the modified BINOL have been synthesized. It is established that even when the phosphoramidites derived from the unsusbstituted BINOL 1 fail to give an appreciable optical induction in the asymmetric reduction of acetophenone/phenacyl chloride, those derived from 3 do induce moderate chiral induction (up to 30% ee in the case for acetophenone and 43% ee in the case of phenacyl chloride), thus leaving scope for further improvement in ee for related reactions.     

Enantioselective fluorescent recognition of chiral acids by 3- and 3,3′-aminomethyl substituted BINOLs

Benzylaminomethyl groups are introduced to the 3,3′-positions of BINOL. The resulting compounds can be used to conduct the enantioselective fluorescent recognition of mandelic acid and N-benzyloxycarbonylphenylglycine. In the presence of (S)-mandelic acid, compound (R)-2 showed over 30-fold fluorescence enhancement with the ef [ef=enantiomeric fluorescence difference ratio=(I_S−I₀)/(I_R−I₀)] up to 4.2. In the presence of d-N-benzyloxycarbonylphenylglycine, compound (RR)-4 showed up to 15-fold fluorescence enhancement with the ef up to 5.0. These high fluorescence sensitivity and enantioselectivity make compounds (R)-2 and (RR)-4 practically useful sensors for the recognition of the chiral acids in apolar solvents.     

DNMR investigations on 3,3-Dihalo-2,2,4,4-tetramethylpentanes

The ¹H and ¹³C NMR spectra of 3,3,-diiodotetramethylpentane (2), 3,3-dibromotetramethylpentane (3), and 3,3-dichlorotetramethylpentane (4) are temperature dependent. The activation parameters for the tert-butyl group rotation in 2–4 have been determined. The ¹³C NMR chemical shifts are discussed.     

Asymmetrical nonbridgehead nitrogen—XXIII: Chiral 3,3-bis(trifluoromethyl)diaziridines

By means of the reaction of O-tosyloxime 1a with propargyl amine, esters of glycine and (S)-α-alanine, β-acetoxyethyl amine and β-dimethylaminoethyl amine functionally substituted 3,3-bis(trifluoromethyl)diaziridines 2a–g have been obtained. In the reactions with more bulky amines, (S)-phenylalanine Et ester, (R, S)-α-phenylethyl amine and t-butyl amine, 1a acts as a tosylating reagent. The ester group in diaziridine 2e is readily saponified by alcoholic alkali, whereas diaziridine 2c is rearranged in these conditions with ring-expansion. Complete asymmetric transformation has been found to take place on the formation of the solid phase of diastereomers 2d and 2j, and a closed cycle of diastereomeric transformations has been accomplished. Diaziridine 2g with chiral centres only at the nitrogen atoms has been obtained with the optical purity of 85.5% by resolution via salt 5c with d-(+)-camphor-3-carboxylic acid. The absolute configuration of (+)-2g and its quaternary salt, (+)-2h, has been determined from CD spectra. Optically active (?)-2h salt (optical purity 2.0%) has been also obtained by asymmetric synthesis on the basis of 1–10-camphorsulphonyl oxime 1b. From the kinetics of 2g, h racemization and 2d, e, i, j, k epimerization the energy parameters of the inversion of N atoms in 3,3-bis (trifluoromethyl)diaziridines have been determined.     

Isomeric form and proton localization in (9<Emphasis Type="Italic">E</Emphasis>)-phenanthrene-9,10-dione[(1<Emphasis Type="Italic">Z</Emphasis>)-3,3-dimethyl-3,4-dihydroisoquinolin-1(2<Emphasis Type="Italic">H</Emphasis>)-ylidene]hydrazonium bromide

(9E)-Phenanthrene-9,10-dione[(1Z)-3,3-dimethyl-3,4-dihydroisoquinolin-1(2H)-ylidene]hydrazonium bromide (LH)Br (I) was synthesized. The models of protonated forms of the LH⁺ cation were calculated by quantum-chemical methods, and their relative stability was estimated. The crystal structure of compound I was determined by X-ray diffraction analysis. Compound I is built according to the cation-anion type (the mobile protons are located at the nitrogen atoms). The cation exists in the s-cis,cis-isomeric form stabilized by two cyclic hydrogen bonds. The π-electron density is localized on the multiple bonds N(1)-C(1) (1.292(4) Å) and N(3)-C(12) (1.294(4) Å). the spectroscopic characteristics (IR and electronic absorption spectra) of compound I are obtained.     

Synthesis, resolution and applications of 3,3′-bis(RO)-MeO-BIPHEP derivatives

A series of optically pure 3,3′-bis(RO)-MeO-BIPHEP derivatives are prepared and used in palladium catalyzed asymmetric transformations. The phosphine oxide of (±)-5 is prepared in four steps from p-methoxyphenol and resolved using the novel resolving reagent chloro(l-menthoxy)dimethylsilane. Subsequent conversions provide catalysts 8 and 9. Ligands 6, 7 and 10 are prepared in six steps from p-methoxyphenol and the phosphine oxides of 6 and 7, and 10 are resolved using di-p-toluoyl- and dibenzoyl-l-tartaric acid, respectively. (R)-3,3′-Bispivalate 8 is superior to the other catalysts in asymmetric Heck reaction with 2,3-dihydrofuran while (R)-(+)-bis(tolyloxy) 10 and (+)-(R)-sugar derivative 9 are better in the Pd-catalyzed polyene cyclization; however, the absolute sense of chirality in the product from the polyene cyclization was reversed to that obtained when (R)-(+)-BINAP and (R)-(+)-MeO-BIPHEP were used.     

Convenient preparation of optically active cibenzoline and analogues from 3,3-diaryl-2-propen-1-ols

(R)-(+)-Cibenzoline (95% ee) was synthesized in two steps from (+)-2,2-diphenylcyclopropylmethanol 3a (98% ee), which was oxidized with IBX in DMSO, followed by treatment with ethylenediamine in the presence of I₂ and K₂CO₃ in tBuOH. Compound (R)-(+)-3a (98% ee) was prepared by cyclopropanation of 3,3-diphenyl-2-propen-1-ol 1 with Et₂Zn and CH₂I₂ in the presence of a catalytic amount of (S)-2-(methanesulfonyl)amino-1-(p-toluenesulfonyl)amino-3-phenylpropane 2, followed by esterification with 3,5-dinitorobenzoyl chloride, recrystallization, and hydrolysis.