An Efficient Route to Prepare Metal Organosols by Phase Transfer Procedure

Silver and gold organosols are easily prepared by transferring nanoparticles from aqueous phase into isooctane with high efficiency (＞90%). Concentrations of sodium oleate and magnesium chloride have crucial effects on the transfer efficiency. Based on the UV-visible absorption spectra, TEM micrographs of nanoparticles, as well as molecular modeling calculation about the adsorption conformation of sodium oleate molecules, a possible phase transfer mechanism is proposed.     

Simultaneous Removal of COS and H_2S at Low Temperatures over Nanoparticle a-FeOOH Based Catalysts

Catalysts using a-FeOOH nanoparticles as the active ingredient were tested by a microreactor-chromatography assessing apparatus at atmospheric pressure between 25 and 60C with a gas hourly space velocity of 10,000 h-1, while the removal performance of H2S with catalysts was investigated using the thermal gravimetric method. The results show that the catalysts are highly active for COS hydrolysis at low temperatures (<60C) and high gas hourly space velocity, and the highest activity can reach 100%. The catalyst is particularly stable for 12 h, and no deactivation is observed. Nanoparticle a-FeOOH prepared using hydrated iron sulfate shows higher COS hydrolysis activity, and the optimum calcination temperature for the catalyst is 260C. In addition, the catalysts can remove COS and H2S simultaneously, and 60C is favorable for the removal of H2S. The compensation effect exists in nanoparticle-based catalysts.     

Rapid Synthesis of Size-controlled Gold Nanoparticles by Complex Intramolecular Photoreduction

A rapid synthesis of size-controlled gold nanoparticles was proposed.The method is based on the sensitive intramolecular photoreduction reaction of Fe(Ⅲ)-EDTA complex in chloroacetic acid-sodium acetate buffer solution,where Fe(Ⅱ)-EDTA complex generated by photo-promotion acts as a reductant of AuCl-4 ions.Gold nanoparticles formed were stabilized by EDTA ligand or other protective agents added.As a result,well-dispersed gold nanoparticles with an average diameter range of 6.7 to 50.9 nm were obtained.According to the characterizations by the UV spectrum and TEM,the intramolecular charge transfer of the excited states of complex Fe(Ⅲ)-EDTA and the mechanism of forming gold nanoparticles were discussed in detail.     

Synthesis of palladium-rhodium bimetallic nanoparticles for formic acid dehydrogenation

Herein,we report for the first time the synthesis of preformed bimetallic Pd-Rh nanoparticles with different Pd:Rh ratios(nominal molar ratio:80-20,60-40,40-60,20-80) and the corresponding Pd and Rh monometallic ones by sol immobilization using polyvinyl alcohol(PVA) as protecting agent and NaBH4 as reducing agent,using carbon nanofibers with high graphitization degree(HHT) as the desired support.The synthesized catalysts were characterized by means of Transmission Electron Microscopy(TEM) and inductively coupled plasma optical emission spectroscopy(ICP-OES).TEM shows that the average particle size of the Pd-Rh nanoparticles is the range of 3-4 nm,with the presence of few large agglomerated nanoparticles.For bimetallic catalysts,EDX-STEM analysis of individual nanoparticles demonstrated the presence of random-alloyed nanoparticles even in all cases Rh content is lower than the nominal one(calculated Pd:Rh molar ratio:90-10,69-31,49-51,40-60).The catalytic performance of the Pd-Rh catalysts was evaluated in the liquid phase dehydrogenation of formic acid to H2.It was found that Pd-Rh molar ratio strongly influences the catalytic performance.Pd-rich catalysts were more active than Rh-rich ones,with the highest activity observed for Pd90:Rh10(1792 h^-1),whereas Pd69:Rh31(921 h^-1) resulted the most stable during recycling tests.Finally,Pd90:Rh10 was chosen as a representative sample for the liquid-phase hydrogenation of muconic acid using formic acid as hydrogen donor,showing good yield to adipic acid.     

Hetero-assembly of gold nanoparticles on a DNA origami template

Hetero-assembling of spherical building blocks with well-defined spatial distribution holds great significance in developing chiral nanostructures. Herein, a strategy for hetero-assembling of gold nanoparticles(Au NPs) was demonstrated using rigid bifacial DNA origami as templates. By tuning the sizes and the fixed location of Au NPs on DNA origami, right-handed and left-handed Au NPs nanostructures were respectively constructed. Gel electrophoresis indicated the formation of the DNA origami-Au NPs complex and transmission electron microscopy(TEM) visually displayed the arrangement of Au NPs in these two chiral structures. The spatial configuration and 3D geometry of Au NPs were further illustrated by the stereographic TEM with tilting angles from ?30° to 30°. This strategy provides a universal approach to construct the asymmetrical 3D geometries, which may have potential applications in biomimicking and nanophotonics.     

Wide range temperature detection with hybrid nanoparticles traced by surface-enhanced Raman scattering

We report on the fabrication of a class of surface-enhanced Raman scattering(SERS)active thermometers,which consists of60 nm gold nanoparticles,encoded with Raman-active dyes,and a layer of thermoresponsive poly(N-isopropylacrylamide)(PNIPAM)brush with different chain lengths.These SERS-active nanoparticles can be optimized to maintain spectrally silent when staying as single particles in dispersion.Increasing temperature in a wide range from 25 to 55°C can reversibly induce the interparticle self-aggregation and turn on the SERS fingerprint signals with up to 58-fold of enhancement by taking advantage of the interparticle plasmonic coupling generated in the process of thermo-induced nanoparticles self-aggregation.Moreover,the most significative point is that these SERS probes could maintain their response to temperature and present all fingerprint signals in the presence of a colored complex.However,the UV-Vis spectra can distinguish the differences faintly and the solution color shows little change in such complex mixture.This proof-of-concept and Raman technique applied here allow for dynamic SERS platform for onsite temperature detection in a wide temperature range and offer unique advantages over other detection schemes.     

Homogeneous DNA Detection Based on Fluorescence Quenching by Nanoparticles in Single-step Format :Target-Induced Configuration Transform

A new strategy for homogeneous detection of DNA hybridization in single-step format was developed based on fluorescence quenching by gold nanoparticles. The gold nanoparticle is functionalized with 5’-thiolated 48-base oligonucleotide (probe sequence), whose 3’-terminus is labeled with fluorescein (FAM), a negatively charged fluorescence dye. The oligonucleotide adopts an extended configuration due to the electrostatic repulsion between negatively charged gold nanoparticle and the FAM-attached probe sequence. After addition of the complementary target sequence, specific DNA hybridization induces a conformation change of the probe from an extended structure to an arch-like configuration, which brings the fluorophore and the gold nanoparticle in close proximity. The fluorescence is efficiently quenched by gold nanoparticles. The fluorescence quenching efficiency is related to the target concentration, which allows the quantitative detection for target sequence in a sample. A linear detection range from 1.6 to 209.4 nmol/L was obtained under the optimized experimental conditions with a detection limit of 0.1 nmol/L. In the assay system, the gold nanoparticles act as both nanoscaffolds and nanoquenchers. Furthermore, the proposed strategy, in which only two DNA sequences are involved, is not only different from the traditional molecular beacons or reverse molecular beacons but also different from the commonly used sandwich hybridization methods. In addition, the DNA hybridization detection was achieved in homogenous solution in a single-step format, which allows real-time detection and quantification with other advantages such as easy operation and elimination of washing steps.     

A new preparation method of gold nanoparticles by intra-reduction of sodium gold（I） sulfite

In this study, well-dispersed gold nanoparticles were prepared by using intra-molecular reduction of sodium gold sulfite, without using additional reductants and chloride free. The technical parameters including transformation temperature, pH, and concentration were optimized by the single-factor method as 90 C, pH 1, and 0.01 mmol/L [Na3Au（SO3）2], respectively. The resultant colloidal transmission electron microscopy images （TEM） and UV-vis absorption spectrophotometer spectra were acquired to check their properties, and the results show this kind of colloidal gold is controlled to 6 nm in sizes and has good stability in solution.     

Fabrication of K-promoted iron/carbon nanotubes composite catalysts for the Fischer–Tropsch synthesis of lower olefins

K-promoted iron/carbon nanotubes composite(i.e., Fe K-OX) was prepared by a redox reaction between carbon nanotubes and K_2FeO_4followed by thermal treatments on a purpose as the Fischer–Tropsch catalyst for the direct conversion of syngas to lower olefins. Its catalytic behaviors were compared with those of the other two Fe-IM and Fe K-IM catalysts prepared by impregnation method followed by thermal treatments. The novel Fe K-OX composite catalyst is found to exhibit higher hydrocarbon selectivity,lower olefins selectivity and chain growth probability as well as better stability. The catalyst structureperformance relationship has been established using multiple techniques including XRD, Raman, TEM and EDS elemental mapping. In addition, effects of additional potassium into the Fe K-OX composite catalyst on the FTO performance were also investigated and discussed. Additional potassium promoters further endow the catalysts with higher yield of lower olefins. These results demonstrated that the introduction method of promoters and iron species plays a crucial role in the design and fabrication of highly active,selective and stable iron-based composite catalysts for the FTO reaction.     

Detection protein biomarker with gold nanoparticles functionalized hollow mesoporous Prussian blue nanoparticles as electrochemical probes

Gold nanoparticles functionalized hollow mesoporous Prussian blue nanoparticles(Au@HMPB NPs)were synthesized and its peroxidase-like activity was explored for electrochemical probe.The Au@HMPB NPs can reduce H2O2 low detection potential of-0.1 V with high sensitivity.After physically adsorption of antibodies onto the gold nanoparticle surface,the functionalized nanoparticles were turned into immuno-probe.The soluble a-chain of interleukin-2(IL-2)receptor(sCD25)was chosen as a model protein biomarker to test the performance of the probe.sCD25 in the samples were captured and enriched by capture anti-CD25 antibody functionalized magnetic nanospheres.Detection antibody functionalized Au@HMPB can then be linked onto the nanospheres and generate electrochemical current towards H2O2 reduction.The electrochemical responses to 1 mmol/L H2O2 was increased with the increasing concentration of CD25.     

Self‐Assembly of ZnO Nanocrystals in Colloidal Solutions

The self‐organization in solution of ZnO nanocrystals into superlattices is monitored by dynamic light scattering. When long‐alkyl‐chain amines or carboxylic acids are used as stabilizing ligands, no organization is observed. In contrast, when binary mixtures of long‐alkyl‐chain amines and carboxylic acids are used, the presence of a thermodynamic equilibrium between free and organized ZnO nanoparticles is detected in THF or toluene. The superlattices of organized ZnO nanoparticles are independently observed by TEM and SEM. The coordination mode of the ligands at the surface of the ZnO nanoparticles is evidenced by NMR studies. The presence of ion‐paired ammonium carboxylate surrounding the surface of ZnO nanoparticles appears to be a necessary requirement to govern this reversible organization. This is substantiated by the absence of organization of ZnO nanoparticles when either a solvent of high dielectric constant, such as acetone, or a strong hydrogen‐bond acceptor is used.     

Formation of Ordered Arrays of Gold Nanoparticles from CTAB Reverse Micelles

In this presentation, a reverse micelle technique was described to create colloid gold nanoparticles and their self-organization into superstructures. Gold nanoparticles were prepared by the reduction of HAuCl₄ in CTAB/octane+1-butanol/H₂O reverse micelle system using NaBH₄ as reducing agent. Dodecanethiol (C₁₂H₂₅SH) was used to passivate the gold nanoparticles immediately after formation of the gold colloid. After re-dispersing in toluene under ultrasonication, a supernatant containing nearly monodispersed dodecanethiol-capped gold nanoparticles was obtained. Self-organization of the gold nanoparticles into ID, 2D and 3D superstructures was observed on the carbon-coated copper grid by TEM. A representative TEM mirograph of the 2D array is shown in Fig. 1. UV/Vis absorption spectra were also used to characterize the gold colloids with and without dodecanethiol capping.     

Self-assembly of small gold nanoparticles through interligand interaction

Stable and monodisperse Au nanoparticles smaller than 2 nm are easily prepared by the reduction of HAuCl(4) x 4H(2)O in DMF/H(2)O in the presence of a series of bidentate ligands, 2,6-bis(1'-(n-thioalkyl)benzimidazol-2-yl)pyridine (TC(n)BIP, n = 3, 6, 8, 10, 12). The TC(n)BIP ligands afford stronger coordination ability than alkanethiols due to their bidentate nature. These small nanoparticles form hexagonal close-packed (hcp) two-dimensional (2D) superlattices with tunable interparticle spacings (from 1.2 to 2.5 nm), produced by changing the length of the ligand at both the hydrophobic amorphous carbon and the air-water interface. Long-range-ordered hcp 2D superlattices were fabricated through the cleavage and construction of interligand pi-pi interactions formed via an annealing process at the air-water interface.     

Triethylsilane as a mild and efficient reducing agent for the preparation of alkanethiol-capped gold nanoparticles

The reaction of HAuCl(4).4H(2)O and n-C(12)H(25)SH with 1 equiv. of Et(3)SiH in an organic solvent affords spherical gold nanoparticles (AuNPs) with narrow dispersity.     

Thermolysis of gold(I) thiolate complexes producing novel gold nanoparticles passivated by alkyl groups

Thermolysis of gold(I) thiolate complex, [C14H29(CH3)3N][Au(SC12H25)2], at 180 degrees C for 5 h under an N2 atmosphere produces novel gold nanoparticles passivated by alkyl groups derived from the precursor complex, the TEM image of which shows spherical particles with average diameter 26 nm.     

Organic mediator-induced structural transformation in superlattices of monolayer-protected gold nanoparticles

N-acetylglutathione (NAG)-protected gold nanoparticles self-assemble into three-dimensional (3D) face-centered cubic (fcc)-type superlattices at an air/water interface under highly acidic conditions. To prepare the well-defined superlattices, 1month's incubation is at least necessary since the size growth of the as-prepared nanoparticles is essential. Addition of 4-pyridinecarboxyic acid (PyC), a bifunctional hydrogen-bonding mediator, promotes the formation of the superlattices, which are created for about 2weeks' storage. Interestingly, PyC-induced nanoparticle superlattices are in a body-centered tetragonal (bct) structure. The fcc-to-bct phase transformation would be due to stronger interaction between NAG and PyC than that between NAG molecules on the gold nanoparticle surfaces.     

Tunable plasmonic response from alkanethiolate-stabilized gold nanoparticle superlattices: evidence of near-field coupling

We report on the self-assembly of large-area, highly ordered 2D superlattices of alkanethiolate-stabilized gold nanoparticles ( approximately 10.5 nm in core diameter) onto quartz substrates with varying lattice constants, which can be controlled by the alkyl chain lengths, ranging from C12 (1-dodecanethiolate), C14 (1-tetradecanethiolate), C16 (1-hexadecanethiolate), to C18 (1-octadecanethiolate). These 2D nanoparticle superlattices exhibit strong collective surface plasmon resonance that is tunable via the near-field coupling of adjacent nanoparticles. The approach presented here provides a unique and viable means of building artificial "plasmonic crystals" with precisely designed optical properties, which can be useful for the emerging fields of plasmonics, such as subwavelength integrated optics.     

Two-dimensional crystal structure of a quaterthiophene-alkanethiol self-assembled monolayer on gold

We investigated the fine structure of a self-assembled monolayer of dodecanethiol functionalized by alpha-quaterthiophene on gold (alpha-4TC 12H 24SH). The molecular orientation, quantified using polarization modulation infrared reflection-absorption spectroscopy, was studied as a function of the adsorption time. The alpha-4T moieties arrange in the upright position on the surface as the adsorption time increases, while the alkyl chain organization remains poor. Here we quantify the orientation of the self-assembled monolayer and, more significantly, reveal through surface X-ray diffraction that after a long incubation period (12 h) the alpha-4T on the gold surface adopts a 2D crystal structure.     

Formation of low-symmetric 2D superlattices of gold nanoparticles through surface modification by acid-base interaction

In the present work, a novel method was developed for the fabrication of 2D superlattices with different symmetries. Same-surface amino-functionalized Au nanoparticles as building blocks were self-assembled to form different 2D superlattices using surface modification with organic acids. The 2D superlattices of quasi-honeycomb and square structures were obtained by neutralizing amino-functionalized Au nanoparticles with 1,3,5-tribenzenecarboxylic acid and acetic acid, respectively. These results strongly suggest that the different types of 2D or 3D superlattices can be constructed by simple addition of proper acid to nanoparticles functionalized with amino groups. This method will allow us to obtain various desired metal superlattices without fully synthesizing the ligands.     

Fivefold symmetry in superlattices of monolayer-protected gold nanoparticles

Three-dimensional (3D) superlattices of gold nanoparticles were prepared at an air/solution interface. The surface of the gold nanoparticles used is protected by N-acetylglutathione (NAG). Morphological studies revealed that the superlattices formed fivefold symmetric structures such as pentagonal rod, decahedron, and icosahedron, which were probably developed by multiple twinning. Moreover, high-resolution surface images of the superlattices in fivefold symmetry showed excellent ordered arrangements of nanoparticles with both close-packed and non-close-packed structures.