N-terminal and internal sequence determination of microgram amounts of proteins separated by isoelectric focusing in immobilized pH gradients

Isolation of microgram amounts of proteins and submicrogram quantities of peptides in a form suitable for sequence analysis is a key step in high sensitivity protein sequencing technology. Recently, methods have been developed which allow the direct, high yield, recovery of microgram amounts of sequenceable proteins separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis or two-dimensional gel electrophoresis. In the present publication, we describe an extension of these methods to obtain N-terminal or internal sequence information from proteins separated by isoelectric focusing in polyacrylamide gels containing immobilized pH gradients. For N-terminal sequence analysis, separated proteins were electrophoretically transferred (electroblotted) onto chemically-modified glass fiber sheets, a support compatible with Edman degradation chemistry. Transferred protein bands were detected on the support, cut out and directly inserted into the cartridge of a gas-phase protein sequenator. For internal sequence analysis, separated proteins were electrophoretically transferred onto nitrocellulose. Protein bands were detected by staining, cut out and the proteins subjected to enzymatic digestion directly on the support. The resulting cleavage fragments (peptides) were released into the supernatant where they were recovered and separated by narrow-bore reversed-phase high performance liquid chromatography for sequence analysis. The potential of this methodology is illustrated by the comparative peptide mapping of isoforms of bovine carbonic anhydrase.     

Separation and characterization of basic barley seed proteins

Basic proteins in barley starchy endosperm from developing seeds were separated by two-dimensional (2-D) nonequilibrium pH gel electrophoresis. Total as well as partial extracts were analyzed. Edman degradation sequencing and immunological detection were performed after transfer of separated proteins onto membranes. Only one protein could be analyzed by N-terminal sequencing of blotted and separated proteins from the total extract. Fractionation of extracts was done using cation exchange chromatography, concanavalin A and heparin affinity chromatography. Internal sequences were determined after in-gel cleavage of proteins using trypsin or cyanogen bromide and separation of the fragments by reversed-phase chromatography or in a gel electrophoresis system for peptide separation. This resulted in a new protocol for obtaining internal sequences from proteins separated by 2-D electrophoresis. A total of 16 sequences, including nine internal sequences, were analyzed, permitting the identification of ten proteins, including five that appeared to have a blocked N-terminus. An additional protein was identified using immunological detection. Three protein sequences remained unidentified. Separated proteins were also analyzed with a glycan detection method.     

Automated nanoflow liquid chromatography/tandem mass spectrometric identification of proteins from Shewanella putrefaciens separated by two-dimensional polyacrylamide gel electrophoresis

The implementation of nanoflow liquid chromatography offers unique opportunities for automation of proteomics research. We demonstrate that automated nanoflow LC/MS/MS allowed the unambiguous identification of proteins from the omnipotent bacterium Shewanella putrefaciens, based on similarity searches against the completely determined genome of related microorganisms and against non-redundant databases. Total protein extracts were separated by 2-dimensional polyacrylamide electrophoresis. Only 1/20th of a tryptic digest mixture obtained from a single Coomassie Blue stained spot was loaded on the nanoflow LC column using a preconcentration/desalting step, and analyzed on-line on a hybrid quadrupole time-of-flight mass spectrometer with an automated MS-to-MS/MS switching protocol. This method allowed the de novo peptide sequence determination of several tryptic fragments and the identification of different proteins. CopyrightCopyright 2000 John Wiley & Sons, Ltd.     

Acid-labile surfactant improves in-sodium dodecyl sulfate polyacrylamide gel protein digestion for matrix-assisted laser desorption/ionization mass spectrometric peptide mapping

Mass spectrometry (MS) together with genome database searches serves as a powerful tool for the identification of proteins. In proteome analysis, mixtures of cellular proteins are usually separated by sodium dodecyl sulfate (SDS) polyacrylamide gel-based two-dimensional gel electrophoresis (2-DE) or one-dimensional gel electrophoresis (1-DE), and in-gel digested by a specific protease. In-gel protein digestion is one of the critical steps for sensitive protein identification by these procedures. Efficient protein digestion is required for obtaining peptide peaks necessary for protein identification by MS. This paper reports a remarkable improvement of protein digestion in SDS polyacrylamide gels using an acid-labile surfactant, sodium 3-[(2-methyl-2-undecyl-1,3-dioxolan-4-yl)methoxy]-1-propanesulfonate (ALS). Pretreatment of gel pieces containing protein spots separated by 2-DE with a small amount of ALS prior to trypsin digestion led to increases in the digested peptides eluted from the gels. Consistently, treatment of gel pieces containing silver-stained standard proteins and those separated from tissue extracts resulted in the detection of increased numbers of peptide peaks in spectra obtained by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOFMS). Hence the present protocol with ALS provides a useful strategy for sensitive protein identification by MS.     

Analysis of intact proteins from cerebrospinal fluid by matrix-assisted laser desorption/ionization mass spectrometry after two-dimensional liquid-phase electrophoresis

A novel combination of methods, two-dimensional liquid-phase electrophoresis (2D-LPE) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), have been used for the analysis of intact brain-specific proteins in cerebrospinal fluid (CSF). 2D-LPE is especially useful for isolating proteins present in low concentrations in complex biological samples. The proteins are separated in the first dimension by liquid-phase isoelectric focusing (IEF) in the Rotofor cell and in the second dimension by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) in the Preparative cell. The removal of SDS by chloroform/methanol/water, followed by sample preparation with the addition of n-octylglucoside, easily interfaced 2D-LPE with MALDI-TOFMS for analysis of intact proteins. Further characterization by proteolytic digestion is also demonstrated. The knowledge of both the molecular weights of the protein and of the proteolytic fragments obtained by peptide mapping increases specificity for protein identification by searching in protein sequence databases. Two brain-specific proteins in human CSF, cystatin C and transthyretin, were isolated in sufficient quantity for determination of the mass of the whole proteins and their tryptic digest by MALDI-TOFMS. This approach simplified the interface between electrophoresis and MALDI-TOFMS.     

S-carboxymethylation of proteins transferred onto polyvinylidene difluoride membranes followed by in situ protease digestion and amino acid microsequencing.

S-Carboxymethylation of immobilized proteins, separated by gel electrophoresis and transblotted to polyvinylidene difluoride (PVDF) membranes is described. In situ protease digestion was used to produce peptide fragments in high yields that were suitable for microsequencing. These fragments could also be used to produce peptide maps, obtained by reverse-phase high performance liquid chromatography (HPLC), that exhibited excellent reproducibility and were comparable to results obtained from digestions in solution. This technique makes it possible to identify Cys residues during Edman degradation. Approximately 70% of the amino acid residues from a protein were determined using only 50-200 pmol. Sufficient information for production of oligonucleotide probes was obtained using 10-50 pmol of material applied to a polyacrylamide gel.     

Use of disk electrophoresis for the separation of large peptide fragments of proteins

Summary The disk electrophoresis of peptide fragments from porcine pepsin obtained by cleaving the pepsin with cyanogen bromide has been performed. A method has been developed for extracting the colored peptide fractions after electrophoresis in polyacrylamide gel. An amino-acid analysis has been performed of peptide fragments B1, B2, and B4 isolated by disk electrophoresis. The results obtained have been compared with the amino-acid composition calculated from the structures of these peptides. The possibility has been shown of using the method described during structural investigations of both proteins and their low-molecular-weight fragments.The peptide preparations were supplied to us by I. Surova, V. Ostoslavskaya, L. Revina, I. Puracheva, É. Vakhitova, and G. Muratova. The amino-acid analysis was performed by E. Timokhina, A. Balduev, G. Fedyukina, O. Khodova, and N. Ivashechkina.All-Union Scientific-Research Institute of the Genetics and Breeding of Industrial Microorganisms. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 219–222, March–April, 1975.     

Separation and characterization of proteins from green and etiolated shoots of rice (Oryza sativa L.): towards a rice proteome

Proteins extracted from green and etiolated shoots of rice were separated by two-dimensional polyacrylamide gel electrophoresis and relative molecular weights and isoelectric points were determined. The separated proteins were electroblotted onto a polyvinylidene difluoride membrane and 85 proteins were analyzed by a gas-phase protein sequencer. The N-terminal amino acid sequences of 21 out of 85 proteins were determined in this manner. N-terminal regions of the remaining proteins could not be sequenced. The internal amino acid sequences of proteins were determined by sequence analysis of peptides obtained by the Cleveland peptide mapping method and compared with those of known plant and animal protein sequences to understand the nature of the proteins. Green shoots revealed the presence of photosynthetic proteins as expected; however, as etiolated shoots were not photosynthetic, only precursors of the photosynthetic proteins were identified. Interestingly, the presence of L-ascorbate peroxidase only in etiolated shoots suggests a cellular protectant function for this antioxidant enzyme in the etiolating shoots. Using this experimental approach, we could identify the major proteins involved in growth regulation in photosynthetic green shoots as well as in etiolating rice seedlings.     

Identification of proteins from one-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis using electrospray quadrupole-time-of-flight tandem mass spectrometry

The potential of electrospray tandem mass spectrometry using a quadrupole-time-of-flight tandem mass spectrometer was evaluated for the identification of two unknown proteins from one-dimensional polyacrylamide gel electrophoresis (1-D-PAGE). Two proteins from cellular cultures of mammary epithelia were purified by 1D-PAGE. Their identification was achieved using peptide sequence tags generated by LC/Q-TOF-MS/MS, whereas MALDI-TOF mass mapping failed for these proteins obtained from simple 1D-PAGE separation.     

Sequence analysis of proteins separated by polyacrylamide gel electrophoresis: towards an integrated protein database

Improved technologies or the synergistic use of complementary methods enhance the efficiency of research and permit the exploration of new approaches for the investigation of complex problems. High sensitivity protein sequence analysis and polyacrylamide gel electrophoresis are such complementary methods. Here we summarize the current status of high sensitivity sequence analysis of proteins separated in polyacrylamide gels and discuss strategies by which this technology can enhance biological research by generating new approaches for the solution of complex, multifacetted problems. Finally, we outline imminent technological advances in the area of high sensitivity protein sequence analysis and argue that further technological developments will ultimately lead to the generation of an integrated protein database (containing structural and functional as well as physiological information in an easily accessible form) of all the proteins separated by high resolution two-dimensional gel electrophoresis.     

Principal component analysis of mass spectra of peptides generated from the tryptic digestion of protein mixtures

Principal component analysis (PCA) has been used to analyse mass spectral peptide profiles obtained from the enzymatic digestion of standard protein mixtures. Scores and loadings plots clearly revealed peptide fragments that differentiated one protein mixture from another. Peptide map search results identified with a high degree of certainty any additional proteins in these mixtures. As a proof-of-concept this methodology was applied to hepatic protein mixtures obtained from rats treated with two hepatotoxic compounds: methapyriline and SB-219994. Liver proteins were extracted, pre-separated by one-dimensional polyacrylamide gel electrophoresis, subjected to tryptic digestion and analysed by mass spectrometry. Two up-regulated proteins, glutathione S-transferase with methapyrilene and peroxisomal bifunctional enzyme with SB-219994, were identified in this manner.     

Rapid analysis of a peptide by fast-atom bombardment mass spectrometry after polyacrylamide gel electrophoresis

Gel electrophoresis has been a powerful technique for the separation of peptides and proteins for many years. After electrophoresis separation on a polyacrylamide gel, the peptide bradykinin was localized using Coomassie Blue as a staining dye. Excess dye was removed by washing the gel with water. For mass spectrometric analysis, bands containing the peptide were crushed, extracted with acetic acid and the eluent applied to the fast-atom bombardment probe. Under these conditions the protonated molecule of bradykinin was clearly observed. Also apparent were sequence ions at about the same intensity observed from authentic bradykinin.     

Stability assessment of FDA-approved ramucirumab monoclonal antibody; validated SE-HPLC method for degradation pattern evaluation

Ramucirumab (RAMU) is a recently US Food and Drug Administration-approved monoclonal antibody that is included in various anticancer protocols. It has a structural complexity and high degradation risk that have a significant effect on its safety and effectiveness. The major aim of this work was to assess the degradation pattern of RAMU based on physicochemical characterization. Mechanical agitation, repeated freeze–thaw cycles, pH and temperature were the selected stress conditions to which RAMU samples were subjected. The SE-HPLC method was applied and validated to monitor the RAMU monomer along with its aggregates and/or fragments. The purity of the separated peaks together with system suitability parameters were determined through the calculation of percentage purity and percentage drop in RAMU concentration. The results were interpreted by correlating them with those of dynamic light scattering and reducing and non-reducing sodium dodecyl sulfate–polyacrylamide gel electrophoresis. Samples incubated at pH 2.0–10.0 and 37°C for up to 4 weeks were analysed, recording detection of reversed phase (RP) aggregates and low molecular weight peptide fragments. Similarly, samples under short-term storage conditions of 4 weeks at different temperatures (−20, 2–8, 25, 37 and 50°C) showed low molecular weight peptide fragments but to a lesser extent. These results highlight the alarming effect on RAMU multidose vial efficacy and safety.     

Use of matrix-assisted laser desorption/ionization time-of-flight mass mapping and nanospray liquid chromatography/electrospray ionization tandem mass spectrometry sequence tag analysis for high sensitivity identification of yeast proteins separated by two-dimensional gel electrophoresis

Current analytical techniques in protein identification by mass spectrometry are based on the generation of peptide mass maps or sequence tags that are idiotypic for the protein sequence. This work reports on the development of the use of mass spectrometric methods for protein identification in research on metabolic pathways of a genetically modified strain of the baker's yeast Saccharomyces cerevisiae. This study describes the use of matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass mapping and liquid chromatography/quadrupole time-of-flight electrospray ionization tandem mass spectrometry (LC/Q-TOF-ESI-MS/MS) sequence tag analysis in identification of yeast proteins separated by two-dimensional polyacrylamide gel electrophoresis (2D-PAGE). The spots were selected for analysis in order to collect information for future studies, to cover the whole pI range from 3 to 10, and to evaluate information from spots of different intensities. Mass mapping as a rapid, high-throughput method was in most cases sensitive enough for identification. LC/MS/MS was found to be more sensitive and to provide more accurate data, and was very useful when analyzing small amounts of sample. Even one sequence tag acquired by this method could be enough for unambiguous identification, and, in the present case, successfully identified a point mutation.     

Identification of 2D-gel proteins: a comparison of MALDI/TOF peptide mass mapping to mu LC-ESI tandem mass spectrometry

A comparative analysis of protein identification for a total of 162 protein spots separated by two-dimensional gel electrophoresis from two fully sequenced archaea, Methanococcus jannaschii and Pyrococcus furiosus, using MALDI-TOF peptide mass mapping (PMM) and mu LC-MS/MS is presented. 100% of the gel spots analyzed were successfully matched to the predicted proteins in the two corresponding open reading frame databases by mu LC-MS/MS while 97% of them were identified by MALDI-TOF PMM. The high success rate from the PMM resulted from sample desalting/concentrating with ZipTip(C18) and optimization of several PMM search parameters including a 25 ppm average mass tolerance and the application of two different protein molecular weight search windows. By using this strategy, low-molecular weight (<23 kDa) proteins could be identified unambiguously with less than 5 peptide matches. Nine percent of spots were identified as containing multiple proteins. By using mu LC-MS/MS, 50% of the spots analyzed were identified as containing multiple proteins. mu LC-MS/MS demonstrated better protein sequence coverage than MALDI-TOF PMM over the entire mass range of proteins identified. MALDI-TOF and PMM produced unique peptide molecular weight matches that were not identified by mu LC-MS/MS. By incorporating amino acid sequence modifications into database searches, combined sequence coverage obtained from these two complimentary ionization methods exceeded 50% for approximately 70% of the 162 spots analyzed. This improved sequence coverage in combination with enzymatic digestions of different specificity is proposed as a method for analysis of post-translational modification from 2D-gel separated proteins.     

Improving the detection of proteins after transfer to polyvinylidene difluoride membranes.

N-Terminal sequence analysis of proteins separated by two-dimensional polyacrylamide gel electrophoresis and transferred onto polyvinylidene difluoride (PVDF) membranes has become the method for molecular characterization of proteins contained in biological samples. However, the proteins of lower abundance cannot be sequenced directly, without improving the technique. We have studied a drying method on several PVDF membranes including Trans-Blott, Immobilon P and Problott. Using Amido Black, Coomassie Brilliant Blue R-250 and Ponceau S, we have obtained, in comparison with the non-dried membranes, an enormous increase in the number of detectable proteins.     

Band broadening of DNA fragments isolated by polyacrylamide gel electrophoresis in capillary electrophoresis

Polyacrylamide gel electrophoresis (PAGE) is used frequently for isolation and purification of DNA fragments. In the present study, DNA fragments extracted from polyacrylamide gels showed significant band broadening in capillary electrophoresis (CE). A pHY300PLK (a shuttle vector functioning in Escherichia coli and Bacillus subtilis) marker, which contained nine fragments ranging from 80 to 4870 bp, was separated by PAGE, and each fragment was isolated by phenol/chloroform extraction and ethanol precipitation. After extraction from the polyacrylamide gel, the peaks of the isolated DNA fragments exhibited band broadening in CE, where a linear poly(ethylene oxide) was used as a sieving matrix. The theoretical plate numbers of the DNA fragments contained in the pHY300PLK marker were >10⁶ for all the fragments before extraction. However, the DNA fragments extracted from the polyacrylamide gel showed decreased theoretical plate numbers (5–20 times smaller). The degradation of the theoretical plate number was significant for middle sizes of the DNA fragments ranging from 489 to 1360 bp, whereas the largest and smallest fragments (80 and 4870 bp) had no obvious influence. The band broadening was attributed to contamination of the DNA fragments by polyacrylamide fibers during the separation and extraction process.     

Strategies for internal amino acid sequence analysis of proteins separated by polyacrylamide gel electrophoresis

An evaluation has been made of various strategies for obtaining internal amino acid sequence data from electrophoretically separated proteins. Electroblotting, in situ proteolysis and extraction, and direct electroelution are compared. Electroblotting of protein or peptides from gels resulted in poor yields (typically, 1-7%). However, higher yields (3-67%) were achieved by in situ enzymatic cleavage followed by acid extraction of the peptides from the gel. Peptides extracted from the gel were separated by reversed-phase high-performance liquid chromatography (RP-HPLC), on short, small-bore columns (100 x 2.1 mm I.D.), to enable recovery of peptides in small volumes (ca. 50 microliters) suitable for microsequence analysis. Capillary zone electrophoresis under acidic conditions (pH 2.5) was used to assess peptide purity before sequence analysis. Cysteine residues were identified in unmodified proteins or peptides by a characteristic phenylthiohydantoin (PTH)-amino acid derivative during sequence analysis. This derivative does not co-chromatograph with any known PTH-amino acid. Direct electrophoretic elution of protein from gels yielded between 45-50% of applied protein. Proteins recovered from gels by electrophoretic elution required further purification by inverse-gradient RP-HPLC [R. J. Simpson, R. L. Moritz, E. C. Nice and B. Grego, Eur. J. Biochem., 165 (1987) 21] to remove sodium dodecylsulphate and acrylamide-related contaminants for sequence analysis.     

Use of a fast protein electrophoretic purification procedure for N-terminal sequence analysis to identify S-locus related proteins in stigmas of Brassica oleracea.

In the cruciferous plant Brassica oleracea L. (cabbage), the S-locus specific glycoproteins (SLSGs) isolated only in stigmas are considered to play an important role in the normal prevention of self-fertilization. Recent molecular data have shown that the gene encoding these glycoproteins (the SLG gene) belonged to a multigenic family consisting of about 10 homologous copies among which another member is expressed, the S-locus related gene (SLR1gene). Our aim was to determine whether the SLR1-gene proteins were expressed in the stigmatic tissues. We first identified the putative SLSGs or SLR1-proteins by Con A-peroxidase detection of glycoproteins separated after isoelectric focusing in polyacrylamide gels. We describe a fast purification procedure for the glycoproteins of interest, based on analytical isoelectric focusing, electrophoresis, and electroblotting of proteins onto polyvinylidene difluoride membranes. Blotted proteins were sequenced for N-terminal amino acid determination. By comparison of the N-terminal sequences of the purified proteins with the peptide sequence predicted from the SLR1-cDNA, we demonstrate the expression of SLR1-like proteins in stigmas of B. oleracea.     

Identification of low molecular weight proteins isolated by 2-D liquid separations

Proteins with molecular mass (M(r)) <20 kDa are often poorly separated in 2-D sodium dodecyl sulfate polyacrylamide gel electrophoresis. In addition, low-M(r) proteins may not be readily identified using peptide mass fingerprinting (PMF) owing to the small number of peptides generated in tryptic digestion. In this work, we used a 2-D liquid separation method based on chromatofocusing and non-porous silica reversed-phase high-performance liquid chromatography to purify proteins for matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOFMS) analysis and protein identification. Several proteins were identified using the PMF method where the result was supported using an accurate M(r) value obtained from electrospray ionization TOFMS. However, many proteins were not identified owing to an insufficient number of peptides observed in the MALDI-TOF experiments. The small number of peptides detected in MALDI-TOFMS can result from internal fragmentation, the few arginines in its sequence and incomplete tryptic digestion. MALDI-QTOFMS/MS can be used to identify many of these proteins. The accurate experimental M(r) and pI confirm identification and aid in identifying post-translational modifications such as truncations and acetylations. In some cases, high-quality MS/MS data obtained from the MALDI-QTOF spectrometer overcome preferential cleavages and result in protein identification.