Weak laser pulse signal amplification based on a fiber Brillouin amplifier

We propose a high-gain and frequency-selective amplifier for a weak optical signal based on stimulated Brillouin scattering in a single mode fiber. To be able to satisfy the needs of high gain and high signal-to-noise ratio laser pulse amplification, different fiber lengths and core diameters are used to fulfill this experiment. In the experiment, a 430 nW(peak power) pulsed signal is amplified by 70 dB with a signal-to-noise ratio of 14 dB. The small size, high gain, low cost, and low noise of the fiber Brillouin amplifier make it a promising weak signal amplification method for practical applications such as lidar.     

High-efficiency hybrid brillouin/ytterbium fiber laser

A high-efficiency hybrid Brillouin/ytterbium fiber laser (BYFL) is demonstrated using a 41.5-cm-longhighly ytterbium-doped fiber and a 10-m-long single-mode optical fiber. The BYFL operates at 1 052.92nm, and the difference between it and the Brillouin pump (BP) wavelength matches the expected stimulated Brillouin scattering (SBS) Stokes shift. Its output power reaches 70.1 mW, which is more than seven times higher than the seeded BP power. The BYFL has an optical signal-to-noise ratio that is greater than 65 dB and has many potential applications, such as in controllable optical delay lines, sensing, and RF photonics.     

Multiple Parameters Optical Sensing Using Fiber Ring Laser Based on Fiber Bragg Gratings and 1064 nm Semiconductor Optical Amplifier

Optics and Spectroscopy - In this paper, a semiconductor optical amplifier (SOA) based 1064 nm fiber ring laser with 63.56 dB optical signal-to-noise ratio (OSNR) is demonstrated. The...     

间隔可调多波长光纤激光器的实验研究

半导体光放大器(SOA)的非均匀加宽特性对产生多波长激光非常有利。本文对两段式立奥-萨尼亚克(Lyot-Sagnac)滤波器进行了详细的理论分析,实现了一种基于半导体光放大器的新型多波长光纤激光器。它利用立奥-萨尼亚克滤波器的波长选择性,在室温下得到了约18个具有30 dB信噪比的多波长激光输出。波长范围1556~1577 nm。通过调节立奥-萨尼亚克环内的偏振控制器,多波长激光的波长间隔可在两种国际电信联盟(ITU)标准波长间隔(0.4 nm和0.8 nm)间选择。这种构型的光纤激光器具有稳定性好、波长间隔可控、信噪比高等优点。     

Long-distance fiber Bragg grating sensor system with a high optical signal-to-noise ratio based on a tunable fiber ring laser configuration

A novel tunable fiber ring laser configuration with a combination of bidirectional Raman amplification and dual erbium-doped fiber (EDF) amplification is proposed for realizing high optical signal-to-noise ratio (SNR), long-distance, quasi-distributed fiber Bragg grating (FBG) sensing systems with large capacities and low cost. The hybrid Raman-EDF amplification configuration arranged in the ring laser can enhance the optical SNR of FBG sensor signals significantly owing to the good combination of the high gain of the erbium-doped fiber amplifier (EDFA) and the low noise of the Raman amplification. Such a sensing system can support a large number of FBG sensors because of the use of a tunable fiber Fabry-Perot filter located within the ring laser and spatial division multiplexing for expansion of sensor channels. Experimental results show that an excellent optical SNR of approximately 60 dB has been achieved for a 50 km transmission distance with a low Raman pump power of approximately 170 mW at a wavelength of 1455 nm and a low EDFA pump power of approximately 40 mW at a wavelength of 980 nm, which is the highest optical SNR achieved so far for a 50 km long FBG sensor system, to our knowledge.     

Multi-wavelength Brillouin-Raman ring-cavity fiber laser with 22-GHz spacing

We experimentally demonstrate a multi-wave length Brillouin-Raman fiber laser configured in a ring-cavity resonator. Interactions between stimulated Brillouin scattering and Raman amplification in a dispersion compensating fiber, attributed to the generation of 16 output channels at injected Raman pump unit power of 650 mW and Brillouin pump power of 2.0 mW. The first output channel has a peak power of 14.8 mW. By discriminating the even-order Brillouin Stokes signals from circulating in the resonator, the generated output channels were found to have wavelength spacing of ∼22 GHz. The output channels were also found to have average optical signal-to-noise ratio value of 11.7 dB.     

Signal-to-noise ratio improvement of a supercontinuum continuous-wave optical source using a dispersion-imbalanced nonlinear optical loop mirror

A multiwavelength continuous-wave (cw) optical source is based on supercontinuum (sc) produced in a highly nonlinear fiber. Noise properties of this optical source are studied through numerical simulations based on the nonlinear Schrödinger equation. The numerical simulations show that the amplified spontaneous emission (ASE) generation in an erbium-doped fiber amplifier and the ASE amplification during the sc generation result in a serious degradation of the signal-to-noise ratio (SNR). A novel scheme for improvement of the SNR of the multiwavelength cw optical source based on sc by using a dispersion-imbalanced nonlinear optical loop mirror is presented and the numerical simulation results are given. As a result, the average level of the SNR improvement is 11 dB and the eye-opening penalty is reduced by 0.91 dB due to the SNR improvement. In addition, the scheme can also be applied for improvement of the SNR of a pulse-type multiwavelength light source. PACS 42.50.Lc; 42.65.Re; 42.79.Sz; 02.60.Cb     

A stable multiwavelength SOA-based fiber ring laser with ultra-narrow wavelength spacing

This investigation demonstrates a stable multiwavelength fiber ring laser with ultra-narrow wavelength spacing using a semiconductor optical amplifier (SOA). A delay interferometer and a mirror are used as a double-pass interferometer to improve the signal-to-noise ratio in this experiment. Up to 181 stable lasing wavelengths with a wavelength spacing of 10.7 GHz and a signal-to-noise ratio of over 24 dB are produced at room temperature.     

Broad tunability of erbium-doped fiber ring laser based on few-mode polarization maintaining fiber Sagnac interferometer

A highly stable erbium-doped fiber (EDF) ring laser with broad tunability is proposed and experimentally demonstrated. It is accomplished by using a few-mode polarization maintaining fiber (FM-PMF) Sagnac interferometer, in which simultaneous Sagnac and modal interferences occur. Continuously tunable output is obtained by exerting the longitudinal strain on the FM-PMF in combination with adjusting a polarization controller (PC) next to the FM-PMF in the Sagnac interferometer. In addition, the adverse impact of uneven EDF gain distribution on the laser output power uniformity may be offset by the PC-dependent transmission loss of the FM-PMF Sagnac interferometer and reflected backward C-band amplifier spontaneous emission from the pumped EDF. During the whole tuning process, the tunable span covers more than 40 nm with the output power flatness better than 1 dB, 3 dB spectral linewidth narrower than 0.1 nm and optical signal-to-noise extinction ratio higher than 45 dB.     

Amplification effect on SBS and Rayleigh scattering in the backward pumped distributed fiber Raman amplifier

The amplification effect on stimulated Brillouin scattering （SBS） and Rayleigh scattering in the backward pumped G652 fiber Raman amplifier （FRA） is studied. The pump source is a 1427.2-nm fiber Raman laser whose power is tunable between 0 - 1200 mW, and the signal source is a tunable narrow spectral bandwidth （〈 10 MHz） external cavity laser （ECL）. The Rayleigh scattering lines are amplified by the FRA and Stokes SBS lines are amplified by the FRA and the fiber Brillouin amplifier. The total gain of SBS lines is the production of the gain of Raman amplifier and that of Brillouin amplifier. In experiment, the SBS gain is about 42 dB and the saturation gain of 25-km G652 backward FRA is about 25 dB, so the gain of fiber Brillouin amplifier is about 17 dB.     

High efficiency, high repetition rate, all-fiber picoseconds pulse MOPA source with 125?W output in 15?μm fiber core

A passive mode-locked fiber laser-delivered 13?ps pulse is saturatedly amplified with a four-stage amplifier chain. 125?W high power all-fiber picoseconds pulse laser is demonstrated in a 15-??m fiber core, and the optical-to-optical conversion efficiency of the main amplifier is up to 86.12?%. A home-made (6?+?1)?×?1 fiber combiner is used to couple the pump light and signal light into the gain double cladding fiber. In order to suppress the nonlinear effects in high-power picosecond fiber amplifiers, the repetition rate of the seed pulse is increased from 60?MHz to?~1?GHz; also the gain fibers are advisably selected. The amplified output spectrum is symmetrically broadened to several nanometers due to self-phase modulation (SPM). No stimulated Raman scattering (SRS), amplified spontaneous emission (ASE) and residual pump light are observed and the optical signal-to-noise ratio is more than 30?dB. The all-fiber picoseconds MOPA laser in this report can be easily performed with the conventional fiber handing equipments, and it has great potential to be applied as pump source in the fields of optical parametric oscillator, laser frequency-doubling and supercontinuum generation.     

基于经典小波变换的布里渊光时域反射计光信号处理

布里渊光时域反射计结构的布里渊散射分布式光纤传感器检测的是自发散射光,信号非常微弱,而且频带在几十兆赫兹以上,难以应用普通相干解调方法。针对传感散射光信号特点,提出基于经典(Morlet)小波变换的光相干检测方法。首先采用微波电光调制产生频移参考光和自发布里渊散射光进行相干检测,再应用经典小波变换进行散射光信号的幅度解调,得到信噪比改善的布里渊散射传感光信号。给出了数值模拟和实验数据处理结果,表明经典小波变换能较好地处理布里渊光时域反射计检测信号。并和基于希尔伯特(Hilbert)变换的传感信号处理方法进行了对比,发现此方法优于基于希尔伯特变换的信号处理。     

Multiwavelength fiber laser using S-band erbium-doped fiber amplifier and semiconductor optical amplifier

A multiwavelength fiber ring laser that is based on an S-band erbium-doped fiber amplifier (EDFA) and a semiconductor optical amplifier (SOA) is developed. An optical switch is used to switch the multiwavelength fiber laser between S-band and L-band. This fiber laser can stably lase seven wavelengths in the S-band or 28 wavelengths in the L-band. Additionally, the lasing wavelengths with a signal-to-noise ratio of over 33 dB and a wavelength spacing of 100 GHz are demonstrated experimentally. The average powers of the lasing wavelength in the S-band and the L-band are −7.53 and −12.15 dBm, respectively.     

Pressure sensing utilizing linear cavity erbium-doped fiber laser

In this paper, we report a fiber laser pressure sensor based on linear cavity erbium-doped fiber laser. The fiber laser structure comprises of an erbium-doped fiber amplifier, a circulator, an optical coupler and a fiber Bragg grating (FBG) which acts simultaneously as a lasing wavelength selecting components as well as a pressure sensor. The FBG is fitted to the shock tube where the pressure is applied. The fiber laser pressure sensor has a low threshold power of 7 mW, an output power of 2.28 mW and an optical signal to noise ratio over 55 dB. The proposed fiber laser sensor is expected to be an attractive choice for long-distance pressure monitoring.     

Bismuth-based erbium-doped fiber as a gain medium for L-band amplification and Brillouin fiber laser

Bismuth-based erbium-doped fiber (Bi-EDF) is demonstrated as an alternative medium for optical amplification and nonlinear applications. The bismuth glass host provides the opportunity to be doped heavily with erbium ions to allow a compact optical amplifier design. The bismuth-based erbium-doped fiber amplifier (Bi-EDFA) is demonstrated to operate at wavelength region from 1570 to 1620 nm using only a 215 cm long of gain medium. The maximum gain of 15.8 dB is obtained at signal wavelength of 1610 nm with the corresponding noise figure of about 6.3 dB. A multi-wavelength laser comb is also demonstrated using a stimulated Brillouin scattering in the 215 cm long Bi-EDF assisted by the 1480 nm pumping. The laser generates more than 40 lines of optical comb with a line spacing of approximately 0.08 at 1612.5 nm region using 152 mW of 1480 nm pump power.     

Broadly tunable multiwavelength fiber laser with bismuth-oxide EDF using large effective area fiber

A multiwavelength laser comb using 2.49 m Bismuth-oxide erbium-doped fiber (Bi-EDF) with different lengths of large effective area fiber (LEAF) in a ring cavity configuration is realized. The Bi-EDF is used as the linear gain medium and LEAF is used as the non-linear gain medium for stimulated Brillouin scattering. Out of the four different lengths, the longest length of 25 km LEAF exhibits the widest tuning range of 44 nm (1576 to 1620 nm) in the L-band at 264 mW pump power and 5 mW Brillouin pump power. In addition, a total of 15 output channels are achieved with total average output power of −8 dBm from this laser structure. All Brillouin Stokes signals exhibit high peak power of above −20 dBm per signal and their optical signal-to-noise ratio of greater than 15 dB.     

Observation of stimulated Brillouin scattering in polymer optical fiber with pump-probe technique

Stimulated Brillouin scattering (SBS) in a perfluorinated graded-index polymer optical fiber (POF) with 120 μm core diameter was experimentally observed for the first time, to the best of our knowledge, at 1.55 μm wavelength with the pump-probe technique. Compared to spontaneous Brillouin scattering previously reported, the Brillouin gain spectrum (BGS) was detected with an extremely high signal-to-noise ratio, even with a short POF (1 m) and scrambled polarization state. We also investigated the BGS dependences on probe power and temperature, which indicate that SBS in a POF measured with this technique can be utilized to develop high-accuracy temperature sensing systems.     

Multiwavelength L-band fiber laser with bismuth-oxide EDF and photonic crystal fiber

A multiwavelength laser comb using a bismuth-based erbium-doped fiber and 50 m photonic crystal fiber is demonstrated in a ring cavity configuration. The fiber laser is solely pumped by a single 1455 nm Raman pump laser to exploit its higher power delivery compared to that of a single-mode laser diode pump. At 264 mW Raman pump power and 1 mW Brillouin pump power, 38 output channels in the L-band have been realized with an optical signal-to-noise ratio above 15 dB and a Stokes line spacing of 0.08 nm. The laser exhibits a tuning range of 12 nm and produces stable Stokes lines across the tuning range between Brillouin pump wavelengths of 1603 nm and 1615 nm.     

L-Band Multi-Wavelength Brillouin–Raman Fiber Laser with 20-GHz Channel Spacing

Abstract

A tunable multi-wavelength L-band Brillouin–Raman fiber laser with a 20-GHz channel spacing utilizing bidirectional ring cavity is proposed and experimentally investigated. The laser employs a co-pumped dispersion compensating fiber as a gain medium for both Brillouin and Raman gains. With a Raman pump of 425 mW, the laser system can generate up to 12 double-spaced Brillouin Stokes signals. This simple laser configuration provides stable Brillouin Stokes signals in the absence of self-lasing cavity modes with a tuning range exceeding 35 nm without using any filtering mechanism. The Stokes signals have more than 20 dB of optical signal-to-noise ratio.     

Brillouin-Raman comb fiber laser with cooperative Rayleigh scattering in a linear cavity

We demonstrate a multiple-wavelength Brillouin comb laser with cooperative Rayleigh scattering that uses Raman amplification in dispersion-compensating fiber. The laser resonator is a linear cavity formed by reflector at each end of the dispersion-compensating fiber to improve the reflectivity of the Brillouin Stokes comb. Multiple Brillouin Stokes generation has been improved in terms of optical signal-to-noise ratio and power-level fluctuation between neighboring channels. Furthermore, the linewidth of the Brillouin Stokes is uniform within the laser output bandwidth.