Surface hydration of crystalline and amorphous silicas

The surface properties of three SiO₂ samples, one crystalline (quartz) and two amorphous, with a large difference in particle size, have been investigated by thermal analysis, adsorption calorimetry and infrared spectroscopy. The variation in the silanol group population upon thermal treatment has been followed via the evolution of the i.r. bands at 3745–3750 cm^–1 (free hydroxyl groups) and 3650-3550 cm^–1 (adjacent pairs of SiOH) and the evolution of the heat of adsorption of water with coverage on the outgassed samples.The adsorption capacities increase in the sequence high surface area amorphous sample T=673 K) brings about dehydroxylation leaving only isolated silanols on the high surface area amorphous silica, and partial dehydroxylation of the low surface area material. Quartz is totally hydrophilic, as its regular structure probably stabilizes the hydroxyl layers at the surface.

---

Zusammenfassung Die Oberflächeneigenschaften von einer kristallinen (Quarz) und zwei amorphen SiO₂-Proben mit großen Unterschieden in der Partikelgröße wurden durch thermische Analyse, Adsorptionskalorimetrie und Infrarotspektroskopie untersucht. Bei thermischer Behandlung eintretende Veränderungen in der Silanolgruppenpopulation wurden durch Messung der IR-Banden bei 3745–3750 cm^–1 (freie Hydroxylgruppen) und 3650–3550 cm^–1 (benachbarte SiOH-Paare) und der Adsorptionswärme von Wasser an ausgeheitzten Proben untersucht. Die Adsorptionskapazitäten nehmen in folgender Reihenfolge ab: amorphe Probe mit großer Oberfläche > amorphe Probe mit geringer Oberfläche > Quarz. Dehydroxylierung der Oberfläche hat zunehmenden hydrophoben Charakter (Gestalt der Isothermen, Adsorptionswärme kleiner als Kondensationswärme von Wasser) zur Folge. Bei der gleichen thermischen Behandlung (673 K) werden bei amorphen Siliciumdioxid mit großer Oberfläche eine nur isolierte Hydroxylgruppen zurücklassende Dehydroxylierung und bei Material mit kleiner Oberfläche eine teilweise Dehydroxylierung beobachtet. Quarz ist vollkommen hydrophyl, da die reguläre Struktur wahrscheinlich die Hydroxylschichten an der Oberfläche stabilisiert.

---

, , (), — . 3745–3750 ^–1 ( ) 3650–3550 ^–1 ( SiOH), . < < . ( , ). (T=673 K) . , , , .

---

---

This research was supported by the Ministry of Public Education within a national programme relating to the structure and reactivity of surfaces.     

Alkylation of toluene with methanol over rare earth forms of Na?X, FAU and Na?Y, FAU

(La^ex, Na)-X, FAU, (Na, Y^ex)-X, FAU, (La^ex, Na)-Y, FAU and (Na, Y^ex)-Y, FAU have been shown to be active and selective catalysts for the alkylation of toluene with methanol. Na–X, FAU and Na–Y, FAU modified by La³⁺ have the highest activity but a very stable activity was reached only on Y³⁺ forms. (Na, RE^ex)-X FAU series prefer ortho-substitution while (Na, RE^ex)-Y, FAU para-substitution. Brönsted acid centers and their strength are responsible for substition.

---

, (La^ex, Na)-X, FAU, (Na, Y^ex)-X, FAU, (La^ex, Na)-Y, FaU (Na, Y^ex)-Y, FAU . Na–X, FAU Na–Y, FAU, La³⁺, , , Y³⁺. (Na, RE^ex)-X, FAU -, (Na, RE^ex)-Y, FAU--. .

     

Application of L-Cysteine-Capped ZnS Nanoparticles in the Determination of Nucleic Acids Using the Resonance Light Scattering Method

Nanometer-sized L-cysteine-capped ZnS particles were synthesized by a colloidal aqueous method. The functionalized nanoparticles are water-soluble and suitable for biological applications. In Tris-HCl buffer solution, nucleic acids combine with cysteine-capped nano-ZnS particles by intermolecular forces to form larger nanoparticles. There are two resonance light scattering peaks at 304.5nm and 373.8nm, respectively. The enhanced RLS is related to the concentration of nucleic acids in the range of 0.04 to 1.2µgmL^–1 for calf thymus DNA and 0.2 to 1.0µgmL^–1 for fish sperm DNA. The detection limits (3) are 19ngmL^–1 for calf thymus DNA and 23ngmL^–1 for fish sperm DNA, respectively. Four synthetic samples were analyzed satisfactorily.     

Solid-Phase Extraction with Slurry Injection of the Resin Into ETAAS for Trace Determination of Thallium in Natural Water

Thallium in natural water samples was determined by electrothermal atomic absorption spectrometry after 1000-fold enrichment by mini solid-phase extraction from a 100-mL sample solution. A Tl-pyrrolidine-1-carbodithioate complex formed in a sample solution of pH 1.6 was extracted on fine particles of a cellulose nitrate resin dispersed in the sample solution. The cellulose nitrate resin was then collected on a membrane filter (25mm^ø) by filtration under suction using a glass funnel with an effective filtration area of 0.64cm². As a result, a circular thin layer of the resin phase with a diameter of 9mm was obtained. Then the resin phase was carved out by an acrylate resin puncher with a 10-mm^ø hole to put it into a sample cup containing 100µL of 10mM HNO₃ containing 0.5mM NaCl. The resin phase was suspended in the solution by ultrasonication. 1000-fold enrichment was thus attained within 15min, and the suspension was delivered to electrothermal atomic absorption spectrometry. The linear calibration graph was obtained in the range of 0–4ng of Tl in 100mL of a sample solution. The detection limit obtained by 3 method was 0.19ng. The proposed method was applied to the determination of Tl in natural water samples. The results showed the concentration of Tl in seawater was 12.1±1.8pgmL^–1 for the calibration graph method and 12.6±1.4pgmL^–1 for the standard addition method. A snowmelt sample contained 20.7±1.0pgmL^–1 of Tl.     

Determination of Attogram Quantities of Silver via Quenching of the Solid Substrate Room-Temperature Phosphorescence of Rhodamine B Based on the Catalysis of its Oxidation by Potassium Persulfate

A new method of SS-RTP for the determination of trace silver has been established. This method is based on the fact that Ag⁺, when activated by ,-bipyridyl (bipy) in a media of HAc–NaAc (pH=4.9), can catalyze the reaction of Rhodamine B (RhoB) oxidized by K₂S₂O₈, thus causing the Solid Substrate Room-Temperature Phosphorescence (SS-RTP) of RhoB to be quenched. The activating efficiency of bipy is 6.7 times higher than that of o-phenanthroline (phen). The reduction of the phosphorescence intensity (I_p) of RhoB is directly proportional to the concentration of Ag⁺ ions in the range of 1.6016.0agspot^–1 (0.40µLspot^–1). The regression equation of the working curve can be expressed as I_p=18.78+5.100m_Ag+ (agspot^–1) (r=0.9994, n=6), the detection limit is 0.28agspot^–1. This rapid, accurate and sensitive method has been successfully applied to the determination of trace silver in tea and human hair samples, and the results agree well with the Atomic Absorption Spectroscopy (AAS) method. The mechanism of the catalyzing reaction is also discussed.     

Nature of extended defects of CuO

For the first time, using high-resolution electron microscopy, extended defects (twins, screw dislocations and microdistortions) of disperse CuO have been found. Their structure is described.

---

CuO -, .

     

IR spectra of oxygen adsorbed on SnO2

IR spectra of oxygen adsorbed on SnO₂ with and without lattice defects have been studied. At low temperatures oxygen is adsorbed on defect SnO₂ in two forms of O ₂ ^– . This supports the earlier results obtained by ESR. The low-temperature forms of adsorbed oxygen (unrevealed in ESR spectra) were detected on defectless SnO₂. High-temperature forms of adsorbed oxygen appear in the IR-spectra as bands due to vibrations of the cation-oxygen bond.

---

- SnO₂. , O ₂ ^– , . SnO₂ .

     

Energy Transfer Electrogenerated Chemiluminescence for the Determination of Sulfite

A simple and novel electrogenerated chemiluminescence (ECL) method for the determination of sulfite has been developed based on the energy transfer ECL process. It was found that a weak ECL signal of sulfite was electrochemically generated on a platinum electrode in neutral aqueous solution. The signal was strongly enhanced by rhodamine B as an energy receptor and further enhanced by the neutral surfactant Tween 80. In 0.10M phosphate buffer solution (pH=7.5) containing 2.0×10^–6gmL^–1 rhodamine B and 0.4% (v/v) Tween 80, the ECL response to the concentration of sulfite at a potential of 0.82V was linear over a range of 1.0×10^–7gmL^–1 to 8.0×10^–6gmL^–1, and the detection limit was 5×10^–8gmL^–1. The relative standard deviation (n=11, 1.0×10^–6gmL^–1) was 3.8%. The proposed method has been successfully applied to the determination of sulfite in pharmaceutical injections and white sugar samples.     

Excess heat of mixing of binary mixtures of pyridine withn-alkanes at 313.15 K

The molar excess enthalpies of binary mixtures of pyridine with C₆–C₉ n-alkanes have been measured at 313.15 K in the entire composition range. The measuredH ^E values were compared with those calculated by means of the Prigogine-Flory-Patterson theory and by the ERAS method.

---

Zusammenfassung Die molaren Überschußenthalpien binärer Mischungen von Pyridin mit C₆–C₉ n-Alkanen wurden bei 313,15 K im ganzen Zusammensetzungsbereich gemessen. Die gemessenenH ^E Werte wurden mit denen verglichen, die mit Hilfe von Prigogine-Flory-Patterson Theorie und nach der ERAS-Methode berechnet wurden.

---

313,5 n- (₆-₉) ce . -- (ERAS).

     

Interaction between metal and support: Effects of support acidity on adspecies of co over Ru

Supported Ru/X catalysts (X: SiO₂, Al₂O₃, SiO₂·Al₂O₃, HY) have been investigated by IR and TPR (temperature programmed reduction). Due to interaction between Ru and Lewis or Brönsted sites of the support, the Ru sites become electron-deficient. Stronger acidity of the support makes the Ru sites more electron-deficient, and as a result, adspecies of Ru⁺ (CO)₄ or Ru⁺(CO)₂ can occur more easily.

---

Ru/X (X:SiO₂, Al₂O₃, SiO₂·Al₂O₃, HY) - . Ru . , Ru⁺(CO)₄ Ru⁺(CO)₂.

     

Oxidation of propylene to acrylic acid on a Fe?Mo?Bi oxide system

Data obtained in a flow reactor show that iron(III) molybdate doped by bismuth can oxidize propylene to acrylic acid directly in one step. Part of the catalyst works in a partially reduced form and in the preparation of the catalyst the surface acidity must be controlled.

---

, , (III), , . .

     

Electrochemical Determination of Ascorbic Acid at γ-MnO<Subscript>2</Subscript> Modified Carbon Black Microelectrodes

A carbon black microelectrode modified by -MnO₂ has been prepared. The electrocatalytical oxidation of ascorbic acid (AA) at this microelectrode was investigated. The 2nd-order linear scan voltammograms of AA are recorded from –0.5 to 0.5V (vs. SCE). The relationship between the oxidation peak current of AA and its concentration in the range of 1.0×10^–64.0×10^–3molL^–1 is linear. The detection limit (3) was found to be 6.0×10^–7molL^–1. Also, the determination of AA in samples is evaluated, and the results are satisfactory.     

Kinetics of formation,dissociation and equilibrium constants of pentacyanoaquoruthenate(II) with heterocycles

The kinetics of formation and dissociation reactions of [Ru(CN)₅L]^3– with a series of heterocyclic ligands were studied in aqueous media. In this presence of an excess of heterocycle, the observed second order rate constants were calculated from the k_obs versus [ligand] plot at =0.100m NaClO₄. Activation parameters for the formation reactions (H=28±7kJmol^–1 and S=140±35JK^–1mol^–1) are comparable for all systems, indicating a common mechanism. The kinetics of exchange of coordinated heterocycles for 1,3,5-triazine yielded a rate saturation typical of a limiting dissociative mechanism. Activation parameters of the limiting first order specific rate of dissociation reactions were H=85±7kJmol^–1 and S=18±4JK^–1mol^–1. Equilibrium constants were calculated from the second order rates of formation and pseudo-first order rates of dissociation reaction.     

Thermal stability of substituted poly-xylylenes

The insertion of meta units in the chain of poly-p-xylylene decreases both the onset temperature of oxidative degradation and the rate of decomposition.Functionalization of the polymer with chlorine and sulphonic groups makes the chain more resistant to high temperature treatments, notwithstanding the low stability of the substituent groups.

---

Zusammenfassung Die Einführung von Metaeinheiten in die Kette von Poly-p-xylen setzt sowohl die Einsetztemperatur des oxydativen Abbaues als auch die Zersetzungsgeschwindigkeit herab. Die Einführung von Chlor und Sulfogruppen erhöht trotz der geringen Stabilität der Substituenten die Temperaturbeständigkeit der Kette.

---

- -- . , .

     

Determination of Heavy Metal Ions in Chinese Herbal Medicine by Microwave Digestion and RP-HPLC with UV-Vis Detection

A new method for the simultaneous determination of heavy metal ions in Chinese herbal medicine by microwave digestion and reversed-phase high-performance liquid chromatography (RP-HPLC) has been developed. The Chinese herbal medicine samples were digested by microwave digestion. Lead, cadmium, mercury, nickel, copper, zinc, and tin ions in the digested samples were pre-column derivatized with tetra-(4-chlorophenyl)-porphyrin (T₄-CPP) to form the colored chelates which were then enriched by solid phase extraction with C₁₈ cartridge and eluted from the cartridge with tetrahydrofuran (THF). The chelates were separated on a Waters Xterra RP₁₈ column by gradient elution with methanol (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) and THF (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) as mobile phase at a flow rate of 0.5mLmin^–1 and detected with a photodiode array detector in the range of 350–600nm. In the original samples the detection limits of lead, cadmium, mercury, nickel, copper, zinc and tin are 4ngL^–1, 3ngL^–1, 6ngL^–1, 5ngL^–1, 2ngL^–1, 6ngL^–1, and 4ngL^–1, respectively. This method was applied to the determination of lead, cadmium, mercury, nickel, copper, zinc and tin in Chinese herbal medicine samples with good results.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

Flame Atomic Absorption Spectrometric Determination of Gold and Palladium Using Microcolumn On-line Preconcentration and Separation

A microcolumn on-line preconcentration and separation system was developed for the flame atomic absorption spectrometric (FAAS) determination of trace levels of gold and palladium. The analytes were selectively adsorbed onto the microcolumn packed with 2-mercaptothiazole immobilized silica gel (MBTSG) in an acidity range of 0.1 to 6.0M HCl at a sampling flow rate of 4.0mLmin^–1. The analytes adsorbed could be desorbed by a thiourea solution with a flow rate of 2.0mLmin^–1. Most of the common coexisting metal ions at a concentration of 25.0mgmL^–1 and anions at a concentration of 50.0mgmL^–1 did not interfere with the preconcentration and determination of Au and Pd. The limits of detection (LOD), defined as three times the standard deviation of the blank (3), of Au and Pd are 10ngmL^–1 and 26ngmL^–1, respectively, with a preconcentration time of 60s. The relative standard deviation (RSD) is about 2.0% for 0.20µgmL^–1 Au and 0.30µgmL^–1 Pd. With a sample loading time of 30min, 6.7ngmL^–1 Au and 10ngmL^–1 Pd can be preconcentrated quantitatively. A geological sample, an anode slime and a secondary nickel alloy were successfully determined with the proposed method, and the results obtained showed good agreement with the certified values.Received December 23, 2002; accepted May 14, 2003 Published online August 8, 2003     

Selective Spectrophotometric Determination of Aluminium in the Presence of Beryllium and Lanthanide Cations

A spectrophotometric method for the selective determination of Al(III) in the presence of Be and Ln (lanthanide) cations is proposed. It is based on the selective reaction of SXO (Semi-Xylenol Orange) with Al(III) at pH 2.6. The presence of 8%v/v of 1,2-ethanediol serves to stabilize the chelate formed by heating at 100°C for 5min. 0.5mg each of Be(II), Ce(III), La(III), 4mg of Mn(II), 1.2mg of Pb(II), 1mg of Tl(I), 40mg each of Ca(II) and Mg(II) and 1.9mg of sodium dihydrogen phosphate are tolerable. A ligand buffer of HEDTA-Pb is incorporated to further enhance the selectivity of the color reaction. Under the specified conditions SXO reacts with Al(III) to form a 1:1 chelate. Its molar absorptivity at 526nm was found to be 3.3×10⁴Lmol^–1cm^–1. The linear regression equation for 2–20µg of Al(III) is A=0.04458C+0.0112 (where C stands for the concentration of Al(III), µg per 25mL) and correlation coefficient =0.9988. The RSD at the level of 10µg (n=10) and LOQ were found to be 3.5% and 2µg, respectively.     

Determination of Na,K, Rb and Cs Distribution in Human Brain Using Neutron Activation Analysis

This study aims to investigate the distribution of Na, K, Rb and Cs in human brains (5 individuals, 12 brain parts, mean age: 75 years). Distribution of the trace metals between lipid fraction and brain tissue was investigated in solvent extraction experiments. Determinations were carried out by instrumental neutron activation analysis. The present results show a rather non-homogeneous distribution for Na and a relatively uniform distribution for K, Rb and Cs. The mean concentrations found are 7440µgNag^–1 dry weight, 12800µgKg^–1, 14µgRbg^–1 and 50ngCsg^–1. A highly significant positive correlation was found between Rb and Cs. Solvent extraction experiments showed that 19% of Rb and 26% of Cs of the total content is located in lipid fraction.     

Structural studies and diffusion measurements of water-swollen cellophane by NMR imaging

NMR imaging and spatially resolved diffusometry have been used to study the distribution of water within swollen cellophane and measure its diffusion coefficient. Water concentration and diffusion coefficient were found to be essentially constant across most of the film thickness. However, significantly slower diffusion was indicated for water near the film surface (D=0.5×10^–9m²s^–1) compared with water in the centre of the film (D=0.88×10^–9m²s^–1). This was also reflected in lower T ₂ values at the edge of the film indicating water with more restricted motion. These observations were interpreted in terms of dense surface regions of cellulose (skin) over a more porous interior (core).