Alternating copolymerization through the complexes of conjugated vinyl monomers–alkylaluminum halides

A vinyl monomer that has the nitrile or carbonyl group conjugated to the C?C double bond, such as acrylonitrile, methyl acrylate, and methyl methacrylate, forms a complex with an alkylaluminum halide, and the complex reacts spontaneously with a hydrocarbon monomer such as styrene, propylene, or ethylene, giving a high molecular weight copolymer. The copolymers always contain the two monomer units in 1:1 ratio. Thus styrene, copolymerized with methyl acrylate or methyl methacrylate in the presence of ethylaluminum sesquichloride in homogeneous toluene solution, gives such an equimolar copolymer regardless of the initial monomer compositions. The NMR spectra of these copolymers are distinctly different from those of the equimolar copolymers obtained with azobisisobutyronitrile as initiator and have simpler and well separated patterns. The copolymers and the corresponding radical copolymers appear to be amorphous, judged by their x-ray diffraction patterns and their differential thermal analyses. Their infrared spectra resemble each other very closely. Hence, the difference in the NMR spectra may be ascribed to the matter of the sequence distribution. The infrared spectrum of ethylene–methyl acrylate copolymer shows no absorption near 720 cm.^?1 due to the methylene sequence arising from ethylene–ethylene linkage. These experimental data lead to the inference that the equimolar copolymers obtained in this work may have an alternating sequence.     

Polymerization of coordinated monomers. XVIII. Sequence distribution in methyl acrylate–styrene copolymers prepared in the presence of zinc chloride

Methyl acrylate and styrene have been copolymerized in the presence of zinc chloride either by photoinitiation or spontaneously. The copolymerization mechanism is investigated by analyses of copolymers composition and monomer sequence distribution. The resulting copolymers are not always alternating, their composition being dependent especially on the monomer feed ratio. Appreciable deviation to higher methyl acrylate unit content from an equimolar composition occurs at monomer feed fractions of methyl acrylate over 0.7. The larger deviation is induced by higher temperature, by photoirradiation, and by greater dilution of the reaction mixture with toluene. The ¹³C-NMR spectrum of the alternating copolymer shows a sharp singlet at the carbonyl region, whereas the spectra of random copolymers prepared by benzoyl peroxide initiation at 60°C show a triplet splitting at the carbonyl carbon region, irrespective of copolymer composition. The relative intensities of the triplet peaks for the random copolymers are in good correspondence to the contents of triad sequences calculated by means of conventional radical copolymerization theory. These results clearly indicate that the carbonyl splitting is caused predominantly by variation of the monomer sequence and not by variation of the stereosequence. The monomer sequence distribution in the copolymers is thus directly and quantitatively measured from the split carbonyl resonance. Although the same triplet splitting appears in the spectra of methyl acrylate–rich copolymers prepared in the presence of zinc chloride at high feed ratios (>0.7) of methyl acrylate, the relative intensities of the split peaks do not fit the sequence distributions of random copolymers calculated by means of the Lewis–Mayo equation. The copolymerization yielding these peculiar sequences and the alternating sequence in the presence of zinc chloride is fully comprehended by a copolymerization mechanism proceeding between two active coordinated monomers, i.e., the ternary molecular complex composed of zinc chloride, methyl methacrylate, and styrene, and the binary molecular complex composed of zinc chloride and methyl methacrylate.     

Alternating copolymerization of methyl acrylate with donor monomers having a protected amine group

Attempts were made to copolymerize p-aminostyrene, p-acetamidostyrene, N-methyl-p-aceta-midostyrene, N-(4-vinylphenyl) phthalimide, N-vinyl succinimide, and N-vinyl phthalimide with methyl acrylate complexed with ethyl aluminum sesquichloride. Only reactions involving N-(4-vinylphenyl)phthalimide and N-vinyl phthalimide yielded alternating copolymers. N-vinyl succinimide gave nonalternating copolymers insoluble in common solvents and the other monomers did not copolymerize. In some cases, the conventional radical copolymers were prepared for comparison purposes. The reactivity ratios of the free-radical initiated copolymerization of methyl acrylate (I) with N-(4-vinylphenyl)phthalimide (II) were r₁ = 0.14 and r₂ 1.56. The alternating copolymers were studied by ¹H-NMR and ¹³C-NMR spectroscopy. The alternating copolymer of N-(4-vinylphenyl)phthalimide with methyl acrylate was hydrazinolyzed to form the alternating copolymer of methyl acrylate with p-aminostyrene. Hydrazinolysis of the alternating copolymer of methyl acrylate with N-vinyl phthalimide removed the phthalimide moiety and generated vinyl amine units which readily cyclized with neighboring methyl acrylate units to form copolymers that contained five-membered lactam rings. The infrared (IR) spectra of the hydrazinolyzed products contain bands due to amine or amide groups and are devoid of the characteristic bands of the phthalimide ring.     

Microstructural study of poly(methyl methacrylate-co-n-propyl acrylate) by 13C NMR

Analysis of carbonyl and β-CH₂ signals in the 100?MHz ¹³C NMR spectra of poly(methyl methacrylate-co-n-propyl acrylate) (PMMA/nPrA), provided distribution of configurational-compositional sequences for a series of the copolymer samples of different composition at pentad level for carbonyl signal and hexad level for the backbone methylene carbons. Computer simulation of the spectra based on incremental calculation of the chemical shifts for individual sequences provided very good agreement with the experimental spectra.     

Thermal stability of copolymers of vinyl acetate and methyl acrylate

The thermal degradation of a series of copolymers of vinyl acetate and methyl acrylate and the two homopolymers poly(vinyl acetate) and poly(methyl acrylate) obtained using Ce(IV) as initiator has been investigated using differential thermal analysis (DTA) and thermogravimetry (TGA) in dynamic nitrogen. The kinetic parameters E, n, and A have been obtained following several methods of thermogravimetric analyses. The stability increases as the methyl acrylate content in the copolymer composition increases. The incorporation of 5 mol % of vinyl acetate in the copolymer produces a marked decrease in stability compared to the homopolymer poly(methyl acrylate). There is evidence for an intramolecular lactonization process in vinyl acetate—methyl acrylate copolymers.     

NMR analysis of the microstructure of poly(methyl acrylate-co-N-vinylcarbazole)

The microstructure of a series of high conversion copolymers of methyl acrylate (MA) and N-vinylcarbazole (NVC) was characterized by NMR. ¹H- and ¹³C-NMR spectra were assigned by comparison to the homopolymers and by using heteronuclear shift correlation spectroscopy. MA-centered triad distributions were obtained from the carbonyl carbon. Distributions of NVC sequences were determined from aromatic carbons 1 and 8a, and aromatic proton 1 These experimentally determined sequence distributions were compared to those calculated from reactivity ratios approximated from the copolymer compositions. Agreement was very good for low NVC content copolymers. Three signals were particularly useful in providing rapid assessment of the distribution of NVC units within low NVC content copolymers: proton 1 and carbon 1 of NVC and the carbonyl carbon of MA. © 1992 John Wiley & Sons, Inc.     

Radical copolymerization of acrylic monomers—III stereochemical configuration of methyl methacrylate-phenyl acrylate copolymers

The kinetics of the copolymerization of methyl methacrylate with phenyl acrylate in solution at low conversions have been examined. The ¹[H]NMR spectra of copolymers show some special features which are explained by taking into account the composition and the stereochemical configuration of copolymer sequences in terms of methyl methacrylate centered triads.     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Polymerization of coordinated monomers. XVI. Stereoregulation in the alternating copolymerization of methyl methacrylate with styrene in the presence of metal halides

Triad cotacticities of alternating copolymers of methyl methacrylate with styrene prepared in the presence of zinc chloride, ethylaluminium sesquichloride, and ethylboron dichloride are investigated from the mechanistic point of view by means of ¹H- and ¹³C-NMR. The cotacticities from ¹H-NMR spectra are obtained accurately by using α-d-styrene in the place of styrene and by measuring the spectra on the copolymer in o-dichlorobenzene at 170°C. The relative intensities of three peaks of the splitting signal for the methoxy protons in the nonalternating copolymers obtained by the use of benzoyl peroxide in the absence of metal halides agree well with the cotacticity distribution calculated theoretically by the Lewis-Mayo mechanism with the stereoregulation following Bernoullian statistics. The splitting signals in the ¹H- and ¹³C-NMR spectra of the alternating copolymers prepared in the presence of metal halides cannot be explained by the same mechanism. The relative intensities of three peaks of the splitting signals for the methoxy protons and for the carbonyl carbon in the methyl methacrylate unit (the contents of cotactic triads centered by the methyl methacrylate unit) are not equal to those for the aromatic C₁ carbon in the styrene unit (the contents of cotactic triads centered by styrene unit). The value of f²Y - 4fxfz is not equal to zero, where fx, fy, and fz are the cosyndiotactic, coheterotactic, and coisotactic triad contents, respectively, in the alternating copolymer. Copolymers obtained in the presence of zinc chloride are not exactly equimolar alternating but always contain a methyl methacrylate unit in excess, and the relative intensities of the three peaks for the aromatic C₁ carbon change with the copolymer composition. These results are explained by a proposed mechanism: the alternating copolymerization proceeds through the homopolymerization of a ternary molecular complex composed of a metal halide, methyl methacrylate, and styrene, accompanied with the stereoregulation following first-order Markovian statistics; the increase of methyl methacrylate content in the copolymer prepared in the presence of zinc chloride is caused by the participation of the binary molecular complex composed of a metal halide and methyl methacrylate in addition to the ternary molecular complex.     

Hexafluoro-2-hydroxy-2-propyl-modified polyisoprene blends

Dimensionless equilibrium constants describing the self-association of the hexafluoro-2-alkyl-2-propanol group have been determined from infrared spectroscopic data. Corresponding values of these equilibrium constants for a fully modified polyisoprene containing the hexafluoroisopropanol group (PHFPI) were calculated by taking into account differences in the molar volume of the model and the specific repeat unit of the polymer. Equilibrium constants describing the inter-association of PHFPI with methacrylate, acrylate, and acetoxy type carbonyl groups were obtained from spectroscopic studies of miscible PHFPI blends with poly(n-butyl methacrylate), poly(methyl acrylate), and an ethylene-co-vinyl acetate copolymer containing 70 wt% vinyl acetate. The set of equilibrium constant values were then used to calculate theoretical miscibility windows for the complete range of PHFPI blends with poly(n-alkyl methacrylate)s and four copolymers, ethylene-co-methyl methacrylate, styrene-co-methyl acrylate, ethylene-co-methyl acrylate, and ethylene-co-vinyl acetate. Experimental infrared studies confirm the general validity of the predicted miscibility windows. © 1994 John Wiley & Sons, Inc.     

Reactivity ratios and microstructure determination of vinyl acetate–alkyl acrylate copolymers by NMR spectroscopy

(Vinyl acetate)/(ethyl acrylate) (V/E) and (vinyl acetate)/(butyl acrylate) (V/B) copolymers were prepared by free radical solution polymerization. ¹H-NMR spectra of copolymers were used for calculation of copolymer composition. The copolymer composition data were used for determining reactivity ratios for the copolymerization of vinyl acetate with ethyl acrylate and butyl acrylate by Kelen-Tudos (KT) and nonlinear Error in Variables methods (EVM). The reactivity ratios obtained are r_v = 0.03 ± 0.03, r_E = 4.68 ± 1.70 (KT method); r_v = 0.03 ± 0.01, r_E = 4.60 ± 0.65 (EV method) for (V/E) copolymers and r_v ? 0.03 ± 0.01, r_B ? 6.67 ± 2.17 (KT method); r_v = 0.03 ± 0.01, r_B = 7.43 ± 0.71 (EV method) for (V/B) copolymers. Microstructure was obtained in terms of the distribution of V- and E-centered triads and V- and B-centered triads for (V/E) and (V/B) copolymers respectively. Homonuclear ¹H 2D-COSY NMR spectra were also recorded to ascertain the existence of coupling between protons in (V/E) as well as (V/B) copolymers. © 1995 John Wiley & Sons, Inc.     

Atom transfer radical copolymerizationof acrylonitrile/n‐butyl acrylate: Microstructure determination by two‐dimensional nuclearmagnetic resonance spectroscopy

Atom transfer radical polymerization conditions were optimized and standardized with different initiator and catalyst systems. Acrylonitrile/n‐butyl acrylate copolymers were synthesized with 2‐bromopropionitrile as the initiator and CuCl/Cu(0)/2,2′‐bipyridine as the catalyst system. Variations of the feed composition led to copolymers with different compositions. The number‐average molecular weight and the polydispersity index were determined by gel permeation chromatography. Quantitative ¹³C{¹H} NMR was employed to determine the copolymer composition. The reactivity ratios calculated with a methodology based on the Mao–Huglin terminal model were r_A = 1.30 and r_B = 0.68 for acrylonitrile and n‐butyl acrylate, respectively. The reactivity ratios determined by the modified Kelen–Tudos method were r_A = 1.29 ± 0.01 and r_B = 0.67 ± 0.01. ¹³C{¹H} NMR and distortionless enhancement by polarization transfer (DEPT‐45, 90, and 135) were used to distinguish methyl, methylene, methine, and quaternary carbon resonance signals. The overlapping and broad signals of the copolymers were assigned completely to various compositional and configurational sequences by the correlation of one‐dimensional (¹H, ¹³C{¹H}, and DEPT) and two‐dimensional (heteronuclear single quantum coherence, total correlation spectroscopy, and heteronuclear multibond correlation) NMR spectral data. The complete spectral assignments of carbonyl and nitrile carbons were performed with the help of heteronuclear multibond correlation spectra. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2810–2825, 2005     

Styrene-methyl acrylate copolymers and acrylate homopolymers in solution

Molecular weight determinations by light scattering and osmometry and intrinsic viscosity measurements were made in various solvents on fractions of styrene–methyl acrylate copolymers with different compositions and on acrylate homopolymers prepared by free-radical reaction. Relations between intrinsic viscosity [η] and molecular weight M thus established are compared with those reported by other authors. 2-Methylcyclohexanol was found to be a theta solvent for the copolymers and both parent homopolymers, and isoamyl acetate was a theta solvent for poly(methyl acrylate). From theta point viscosity data obtained with these solvents, unperturbed chain dimensions were estimated. The results are compared with the unperturbed dimensions estimated from the [η]–M relations obtained in good solvents. On the basis of the experimental data it was found that the unperturbed dimension depends linearly on the copolymer composition, in contrast to the case of styrene–methyl methacrylate copolymers. Composition dependences of the theta temperature and of the parameter describing the long-range interactions between nonadjacent segments in polymer chains were investigated. The result implies that long-range interactions between monomeric units never disappear even when those between the same monomeric units vanish. The Huggins constant for copolymer is discussed in terms of the excluded volume variable.     

Copolymers of 2-hydroxyethyl methacrylate and alkyl acrylates: Studies of molecular weight distribution and thermal behavior

Several copolymers of 2-hydroxyethyl methacrylate (HEMA) with methyl acrylate (MA), ethyl acrylate (EA), n-butyl acrylate (BA), and methyl methacrylate (MMA) were prepared at 70°C in nitrogen atmosphere using 0.2% (w/v) benzoyl peroxide as initiator. The copolymer composition was evaluated by estimation of hydroxyl group in the copolymers. Intrinsic viscosity of HEMA–EA, HEMA–BA, and HEMA–MMA copolymers was determined at 35°C in dimethyl formamide. Molecular weight distribution of copolymer samples was evaluated by gel permeation chromatography. Thermal behavior of the copolymers was investigated by dynamic thermogravimetry. Thermal stability decreased on increasing HEMA content in MA, EA, and BA copolymers. However, a reverse trend was observed in HEMA–MMA copolymers.     

Use of FT-IR Spectrometry for On-Line Detection in Temperature Rising Elution Fractionation

Summary: Temperature rising elution fractionation (TREF) has become a popular analytical technique that is able to determine the chemical composition distribution (CCD) of an ethylene/α-olefin copolymer. An infrared (IR) detector is commonly used in TREF detection to measure the concentration of the polymer solution exiting the column as a function of elution temperature. The chemical composition of the eluting polymer at a given elution temperature can be predicted from the relationship between comonomer content and TREF elution temperature pre-established through ¹³C nuclear magnetic resonance (NMR) analysis of TREF fractions. In this article, a Fourier transform infrared (FT-IR) spectrometer has been coupled with a TREF instrument to provide a more powerful tool for characterizing complex olefin copolymers. The Partial Least Squares (PLS) technique is used when analyzing the FT-IR spectra of the eluting polymer solutions. The power of on-line FT-IR detection in TREF is demonstrated using a few complex copolymer systems, such as ethylene-octene copolymer, polystyrene grafted ethylene-vinyl acetate copolymer and ethylene-methyl acrylate copolymer.     

Poly[2,2-dimethyl-4-(methoxylcarbonyl) butylene]: Synthesis with an ethylaluminum sesquichloride–peroxide initiator and NMR characterization

The alternating copolymer of isobutylene and methyl acrylate (the polymer of the title) has been obtained by using ethylaluminum sesquichloride (AlEt_1.5Cl_1.5) and 2-methylpentanoyl peroxide as the initiating system in benzene solution. The alternating copolymer is obtained at an acrylate/Al molar ratio of 17. Higher ratios increase the level of acrylate residues in the copolymer isolated; in the absence of AlEt_1.5Cl_1.5, an equal molar feed gives a copolymer with 75 mole % acrylate units. ¹H- and ¹³C-NMR spectra have been used to study the details of polymer structure and support the equal molar, alternating nature of the macromolecule. The details of the methoxy and gem-dimethyl peaks in the PMR spectra are consistent with a Bernoullian process determining the polymer configurational sequences, with P_m = 0.55–0.60.     

Linear polymers of allyl acrylate and allyl methacrylate

Allyl acrylate and allyl methacrylate were polymerized by anionic initiators to soluble linear polymers containing allyl groups in the pendant side chains. The pendant unpolymerized allyl groups of the resulting linear poly(allyl acrylates) were shown to be present by: (1) the disappearance of the acrylyl and methacrylyl double bond absorptions in the infrared spectra in the conversions of monomers to polymers; (2) postbromination of the allyl bonds in the linear polymer; (3) the disappearance of the allyl groups absorptions in the infrared spectra of the brominated linear polymers; and (4) the thermal- and radical-initiated crosslinking of the linear polymers through the allyl groups. Allyl acrylate and allyl methacrylate show great reluctance to copolymerize with styrene under anionic initiation, but copolymerize readily with methyl methacrylate and acrylonitrile. Block copolymers were prepared by reacting allyl methacrylate with preformed polystyrene and poly(methyl methacrylate) anions. The linear polymers and copolymers of allyl acrylate may be classified as “self-reactive” polymers which yield thermosetting polymers. Bromination of the linear polymers offers a convenient method of producing self-extinguishing polymers.     

Poly(isobornyl methacrylate‐co‐methyl acrylate): Synthesis and stereosequence distribution analysis by NMR spectroscopy

Copolymerization of isobornyl methacrylate and methyl acrylate ( I/M ) is performed by atom transfer radical polymerization using methyl‐2‐bromopropionate as an initiator and PMDETA/CuBr as catalyst under nitrogen atmosphere at 70 °C. The copolymer compositions determined from ¹H NMR spectra are used to determine reactivity ratios of the monomers. The reactivity ratio determined from linear Kelen–Tudos method and non‐linear error‐in‐variable method, are r_I = 1.25 ± 0.10, r_M = 0.84 ± 0.08 and r_I = 1.20, r_M = 0.82, respectively. 1D, distortion less enhancement by polarization transfer and 2D, heteronuclear single quantum coherence, and total correlation spectroscopy NMR experiments are employed to resolve highly overlapped and complex ¹H and ¹³C{¹H} NMR spectra of the copolymers. The carbonyl carbon of I and M units and methyl carbon of I unit are assigned up to triad compositional and configurational sequences, whereas β‐methylene carbons are assigned up to tetrad compositional and configurational sequences. Similarly, methine carbon of I unit is assigned up to triad level. The couplings of carbonyl carbon and quaternary carbon resonances are studied in detail using 2D hetero nuclear multiple bond correlation spectra. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and characterization of copolymers of chloroprene and methyl methacrylate

The preparation of chloroprene–methyl methacrylate copolymers in the presence of Lewis acids (Et_1.5AlCl_1.5) in hydrocarbon solvent and the effect of Lewis acids concentration on copolymer composition are described. ¹³C NMR spectra were obtained on these copolymers. In samples of high MMA content, tactic placements of MMA were observed as well as several different kinds of sequences for chloroprene and MMA. In samples of low MMA content, no tactic placements of MMA were found but several different kinds of chloroprene sequences were observed. From the analysis of the ¹³C NMR spectra of the different copolymers examined, it is apparent that all the various kinds of chloroprene sequences in these copolymers can be determined.