Aqueous Polymerization of Methyl Methacrylate Initiated by Ce4+-Glycolic Acid Redox System

The aqueous heterogeneous polymerization of methyl methacrylate (MMA) initiated by the Ce⁴⁺-glycolic acid (GA) redox system was studied at 35 × 0.2°C under a nitrogen atmosphere. The rate of monomer disappearance was proportional to [MMA]¹[GA]¹[Ce⁴⁺]°, and the rate of eerie ion disappearance was found to be directly proportional to [Ce⁴⁺] and [GA] but independent of [MMA]. The activation energy was found to be 34 kJ/mol. The molecular weight of polymethyl methacrylate increased with increasing [MMA] and decreased with increasing [oxidant]. The effect of increasing [H₂SO₄] on polymerization was also studied. The results are compared with those obtained for the aqueous homogeneous polymerization of acrylamide with the same redox pair.     

Acrylonitrile Polymerization by Ceric lon-Primary Alcohol Redox Systems in Aqueous Nitric Acid

The polymerization of acrylonitrile (AN) initiated by Ce^IV-primary alcohol redox systems has been studied in aqueous nitric acid under nitrogen in the temperature range 0 to 45° C. Taft's correlation can be applied to fit the kinetic results relative to a series of differently substituted primary alcohols. The polymerization is initiated by primary radicals formed in water from the dismutation of the Ce^IV -alcohol complex, This process has a high activation energy (21 kcal/mol) and gives rise to an induction period at temperatures lower than 40° C. PAN chains containing the alcohol residue are terminated predominantly on metal ions. The alcohol enhances the AN solubility in water and accordingly influences the polymerization kinetics. Variations in temperature and concentration of both components of the redox system allow control of the polymerization rate and of the molecular weight of the resulting PAN.     

Polymerization of acrylonitrile initiated by ceric ion–citric acid redox system

Heterogeneous polymerization of acrylonitrile initiated by ceric ammonium sulfate–citric acid (C.A.) redox system is reported at 35 ± 0.2°C under nitrogen atmosphere. The rate of monomer disappearance is found to be proportional to [C.A.]⁰, [Ce⁴⁺]^0.63, and [Monomer]^1.59. The rate of ceric ion disappearance is directly proportional to ceric ion concentration but independent of monomer concentration. The initial rate was independent of [H₂SO₄]. The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreasing ceric ion concentration. Activation energy was found to be 27.9 kJ/mol.     

Reverse Atom‐Transfer Radical Polymerization at Room Temperature

This paper aims at reporting on the “living”/controlled radical polymerization of methyl methacrylate initiated with the benzoyl peroxide (BPO)/Cu^IX (X=Br,Cl)/2,2'‐bipyridine (bpy) redox system at room temperature. No control is observed for the polymerization conducted in bulk and in toluene, whereas a polymer with predetermined molecular weight and rather narrow molecular weight distribution is formed in butanone. The solvent has thus a decisive effect on the reverse atom‐transfer radical polymerization of methyl methacrylate initiated with the BPO/Cu^IX (X = Br,Cl)/bpy ternary system at 25°C.     

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

Aqueous Polymerization of Acrylamide Initiated by Glycolic Acid/Ce4+ Redox System

The aqueous polymerization of acrylamide initiated by the glycolic acid/Ce⁴⁺ redox system was studied in sulfuric acid medium at 35 ± 0.2°C under a nitrogen atmosphere. The initiation was carried out by the free radical generated in the decomposition of the complex formed between the oxidant and the reductant. The monomer disappearance was found to be proportional to [GA]^0,89[Ce⁴⁺]^0.57[M]^1.0, and the rate of ceric ion disappearance was found to be directly proportional to [Ce⁴⁺] and [GA] but independent of [M]. The activation energy of the system was found to be 7.21 kcal/deg/mol. The molecular weight of polyacrylamide increased with increasing [monomer] and decreased with increasing [catalyst]. The effect of pH was also studied in the pH range 2.22 to 1.44.     

Vinyl polymerization initiated by ceric ion reducing agent systems in sulfuric acid medium

Polymerization of the monomers, methyl acrylate (MA) and methyl methacrylate (MMA) was carried out in sulfuric acid medium at 15°C. With the redox initiator system, ceric ammonium sulfate–malonic acid. There was no induction period, and a steady state was attained in a short time. There was found to be no polymerization even after 1 hr. in the absence of the reducing agent R. The initiation was by the radical produced from the Ce⁴⁺–malonic acid reaction. The rate of monomer disappearance was proportional to [M]^1.5, [R]^0.5, and [Ce⁴⁺]^0.3–0.5, and the rate of ceric disappearance was directly proportional to [R] and [Ce⁴⁺]. Chain lengths of the polymers were directly proportional to [M] and inversely to [R]^1/2 and [Ce⁴⁺]^1/2. The experimental results were explained by a kinetic scheme involving the following steps: (a) oxidation of the substrate to give the primary radical which reacts with Ce⁴⁺ to give the products, (b) initiation by the primary radical, (c) propagation, and (d) termination of the growing polymer radicals by the mutual type. For the polymerization of acrylonitrile (AN) by the redox system, ceric ammonium sulfate–cyclohexanone (CH), in sulfuric acid at 15°C., the scheme was modified to include linear type of termination by Ce⁴⁺, along with the mutual termination to explain the results especially under conditions with [Ce⁴⁺] ≥ [CH].     

Polymerization of acrylamide initiated by Ce4+/L-cysteine redox system

Summary The polymerization of acrylamide initiated by Ce 4⁴⁺/L-cysteine redox system has been studied at 35 ± 0.2 °C in dark under nitrogen atmosphere. The effect of monomer,L-cysteine, Ce⁴⁺ and sulphuric acid concentration and temperature on the rate of polymerization has been studied. The rate may be expressed by the following equation:R _p [M] [Ce⁴⁺]^0.5 [Cysteine]^0.44 The overall energy of activation is 4.78 kcal/deg/mole in the investigated range of temperature 30–50 °C. Molecular weight of the polymer is independent of catalyst concentration but increases with increasing monomer concentration.     

Synthesis of Controlled Block and Graft Copopolymers. II. Block and Graft Polymerization Initiated by Monohalo-Containing Polymer/Manganese Carbonyl Systems

Abstract

Block polymerization of methyl methacrylate initiated with monohalo-terminated polystyrene/manganese carbonyl systems were investigated. The rate of polymerization was lower than that of the trihalo-terminated polystyrenelmanganese carbonyl system. The molecular weight of the block copolymers obtained was independent of the conversion. To define the polymerization mechanism, 1-bromobutane was employed as a model compound for monohalo-terminated polystyrene. Polymerization kinetics followed a modified rate equation based on the Michaelis-Menten mechanism. The molecular weight of the block co-polymer could be regulated by varying the ratio of monohalo-terminated polymer to methyl methacrylate. Graft polymerization of methyl methacrylate initiated with chloromethylstyrene-styrene copolymer/ manganese carbonyl was also carried out. The polymerization behavior was strongly affected by the concentration of manganese carbonyl. Characterization of graft copolymers by GPC and halogen analysis showed that the number of grafting points per backbone polymer molecule increased when the concentration of manganese carbonyl was raised, but that the branches became shorter.     

Cu~(2+)离子浓度对Cu~(2+)-Na_2SO_3体系引发甲基丙烯酸甲酯聚合机理的影响

<正> 氧化还原体系引发乙烯类单体自由基聚合过程中,氧化剂或还原剂浓度的变化可能引起聚合机理的改变,Reddy等研究“铜(Ⅱ)——维生素C-氧”体系引发甲基丙烯酸甲酯的自由基聚合时,发现随着Cu~(2+)离子浓度增加,聚合速度由上升至下降;单体反应级数从3/2增至2.0,我们在空气气氛下,对Cu~(2+)-Na_2SO_3体系引发甲基丙烯酸甲酯聚合进行了研究,亦发现Cu~(2+)离子浓度对聚合速度和聚合机理有很大影响,在较低的Cu~(2+)离子浓     

Aqueous Polymerization of Methyl Methacrylate Initiated by the Mn(lll)-Fructose Redox System

The kinetics of vinyl polymerization of methyl methacrylate initiated by the redox system Mn³-fructose were investigated in aqueous sulfuric acid in the temperature range of 20-25°C, and the rates of polymerization and disappearance of Mn³⁺ were measured. The effect of certain water-miscible organic solvents and certain cationic and anionic surfactants on the rate of polymerization has been investigated. A mechanism involving the formation of a complex between Mn³⁺ and fructose whose decomposition yields the initiating free radical with the polymerization being terminated by the metal ion has been suggested.     

Aqueous polymerization of methacrylic acid initiated by Ce4+ -glycolic acid redox pair

The aqueous polymerization of methacrylic acid (MAA) initiated by a Ce⁴⁺ -glycolic acid (GA) system was observed in a sulfuric acid medium at 35 ± 0.2°C in a nitrogen atmosphere. The rate of monomer disappearance was proportional to [MAA]¹ and the rate of ceric ion disappearance was proportional to [GA][Ce⁴⁺]. An increase in the reaction temperature from 30 to 45°C raised the rate and the overall activation energy was 63 kJ/mol. The molecular weight increased with a rise in [MAA] and a reduction in [Ce⁴⁺]. The effect of varying [H₂SO₄] was also studied.     

Polymerization of acrylamide initiated by the Ce4+/thiourea redox system

The polymerization of acrylamide (M) initiated by the Ce⁴⁺/thiourea (TU) redox system has been studied in an aqueous sulfuric acid medium at 35 ± 0.2°C under nitrogen atmosphere. The rate of polymerization is governed by the expression The activation energy is 5.9 kcal deg^?1 mol^?1 in the investigated temperature range 30–50°C. The molecular weight is directly proportional to the concentration of monomer and inversely proportional to the catalyst concentration. With increasing concentration of DMF molecular weight decreases. The range of concentrations for which these observations hold at sulfuric acid concentration of 2.5 × 10^?2 mol/L are [monomer] = 5.0 × 10^?2–3.0 × 10^?1, [catalyst] = (5.0–15.0) × 10^?4, and [activator] = (1.0–6.0) × 10^?3 mol/L.     

Cuso4‐amine redox‐initiated radical polymerization of methyl methacrylate mediated by a CuCl2 complex: Homogeneous reverse ATRP

Kinetic results of CuSO₄/2,2'‐bipyridine(bPy)‐amine redox initiated radical polymerization of methyl methacrylate (MMA) at 70 to 90 °C in dimethylsulfoxide suggest that such initiation is characteristic of a slow rate and a low initiator efficiency, but tertiary amines exhibit a relatively higher rate. UV‐Vis spectroscopy confirms the alpha‐amino functionality of PMMA chains. CuCl₂/bPy successfully mediates the redox‐initiated radical polymerization of MMA with aliphatic tertiary amines in a fashion of slow‐initiated reverse atom transfer radical polymerization (ATRP), i.e. both the initiator efficiency of aliphatic tertiary amines and the average molecular weight of PMMA increase gradually, while the molecular weight distribution remains narrow but become broader with the conversions. As the PMMA chains contain alpha amino and omega C‐Cl moieties, UV‐induced benzophenone‐initiated radical polymerization and Cu^ICl/bPy‐catalyzed ATRP initiated from PMMA lead to block copolymers from terminal functionalities. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2562‐2578     

Aqueous Polymerization of Methyl Methacrylate Initiated by Potassium Peroxydisulfate-Ascorbic Acid Redox System

The aqueous polymerization of methyl methacrylate initiated by the redox system K₂S₂O₈-ascorbic acid has been studied at 35°C under the influence of oxygen. The rate of polymerization increases with increasing ascorbic acid concentration at low activator concentration, remains constant within the range 4.375 × 10^?3 to 11.25 × 10^?3 mole/liter, and at higher ascorbic acid concentration again decreases. The rate varies linearly with monomer concentration. The initial rate and the limiting conversion increase with increasing polymerization temperature. Organic solvents (water-miscible only) and small amounts of neutral salts like KC1 and Na₂SO₄ depress the initial rate and the maximum conversion. The addition of small amounts of salts like Cu²⁺ and Mn²⁺ increases the initial rate, but no appreciable increase in the limiting conversion is observed.     

苯氧铜/正丁基锂体系引发MMA负离子聚合及其活性特征的研究

采用苯氧铜/正丁基锂(PhOCu/n-BuLi)体系引发MMA聚合, 通过GPC, ¹H NMR对聚合物进行了表征. 实验结果表明, 该体系聚合反应速度较快, 温度、引发体系组成是影响聚合物分子量及其分布、单体转化率、引发剂引发效率、聚合物的立构规整性的主要因素; －40 ℃时分子量分布比较窄, 但引发效率也比较低(大约15%). 低引发效率、宽分子量分布与引发剂的聚集状态有关. 分子量与单体浓度、引发剂浓度的关系说明, 该体系具有一定程度的活性聚合特点.     

Polymerization of methyl methacrylate initiated by Mn(III)–glycerol redox system

The kinetics of thermal polymerization of methyl methacrylate initiated by the redox system Mn(III)–glycerol was studied in aqueous sulfuric acid in the temperature range of 30–40°C, and the rates of polymerization, R_p, and Mn³⁺ disappearance, etc., were measured. The effect of certain water-miscible organic solvents and certain cationic and anionic surfactants on the rates of polymerization has been investigated. A mechanism involving the formation of a complex between Mn³⁺ and glycerol whose decomposition yields the initiating free radical with the polymerization being terminated by the metal ion has been suggested.     

Radical Graft Polymerization of Glycidyl Methacrylate and Polycaproamide Fiber

Graft polymerization of glycidyl methacrylate to polycaproamide fiber, initiated by the highly effective redox system Cu²⁺-H₂O₂, was studied. The kinetic parameters affecting the yield of grafted polyglycidyl methacrylate and the efficiency of the graft polymerization were determined.     

Block copolymerization initiated by Mn(III)-poly(ethylene glycol) redox system — general features and kinetics

The kinetics and mechanism of thermal polymerization of acrylonitrile initiated by Mn(III) pyrophosphate — poly(ethylene glycol) (PEG, molecular weight 6000) redox system in aqueous sulfuric acid medium was studied in the temperature range 30–60°C. The overall rates of polymerization and the disappearance of Mn³⁺ were determined. The polymerization was initiated by the organic free radical produced from the Mn³⁺-PEG reaction and the termination was by the metal ions. The rate of polymerization of acrylonitrile was found to be directly proportional to the square of the monomer concentration and first power of PEG concentration, and inversely proportional to the concentration of Mn³⁺. The rate of manganic ion disappearance was found to be directly proportional to manganic ion concentration and PEG concentration, and independent of the monomer concentration. Based on these observations, a plausible reaction scheme was suggested and suitable kinetic expressions were evaluated.     

Nitroxide-mediated photo-living radical polymerization of methyl methacrylate in the presence of (η6-benzene)(η5-cyclopentadienyl)FeII hexafluorophosphate

The photoradical polymerization of methyl methacrylate (MMA) was performed at room temperature using (2RS,2’RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) as the initiator and 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) as the mediator in the presence of (η⁶-benzene)(η⁵-cyclopentadienyl)Fe^II hexafluorophosphate (BzCpFe^II). The bulk polymerization provided narrower molecular weight distributions (Mw/Mn = 1.4 − 1.5) than the solution polymerization in acetonitrile, although BzCpFe^II was insoluble in MMA. The polymerization rate was retarded by an increase in the amount of BzCpFe^II. BzCpFe^II, which had no ability to control the molecular weight by itself, could control it through the interaction with MTEMPO. The interaction of BzCpFe^II and MTEMPO was attributed to the electron transfer involving the MTEMPO–aminoxy anion redox system and the iron redox system. The polymerization was confirmed to occur in accordance with a living mechanism because linear correlations were obtained for both the plots of the first order time–conversion and the conversion–molecular weight.