Phase transformation and structure of n-C50H102/n-C60H122 solid solutions formed from the vapor phase

Binary solid solutions of n-paraffins (n-C₅₀H₁₀₂/n-C₆₀H₁₂₂) epitaxially prepared on potassium hydrogen phthalate substrate from the vapor phase have been studied by electron diffraction to characterize their phase transitions and structure. The continuity of solid solution in the n-C₅₀H₁₀₂/n-C₆₀H₁₂₂ system is demonstrated once lamellar ordering of the crystal packing is achieved. However, such ordering is achieved only by annealing and proceeds through a series of intermediate chain packings. At first, the electron diffraction patterns from all samples prepared at room temperature resemble those from polyethylene, in which no spots corresponding to the interlayer spacings appear. Longitudinal chain translations are induced by annealing to cause the lamellar reflections to appear, while the “polyethylene” subcell reflections remain unsplit until the crystal structure with well-defined methyl end planes is reached.     

Hydrotrope and hydrotrope-solubilization action of cephanone in CTAB/<Emphasis Type="Italic">n</Emphasis>-C<Subscript>5</Subscript>H<Subscript>11</Subscript>OH/H<Subscript>2</Subscript>O system

Cephanone is found to show the hydrotrope and hydrotrope-solubilization action in CTAB/n-C₅H₁₁OH/H₂O system. Cephanone can increase the solubilities of cationic surfactant CTAB or n-C₅H₁₁OH in water and water in n-C₅H₁₁OH. It can also increase the solubilization amount of n-C₅H₁₁OH in O/W microemulsion and that of water in W/O microemulsion, which makes the two regions of O/W and W/O microemulsion larger, and even linked together. The mechanism of the hydrotrope-solubilization action of cephanone is related to the location of cephanone in the palisade of microemulsion which causes the stability of O/W and W/O microemulsion to be enhanced and that of lamellar liquid crystal to be reduced. Therefore, the mechanism of hydrotrope-solubilization is the structural transition from lamellar liquid crystal to the bicontinuous structure.     

Phytochemical Study on Moghania Strobilifera

n-C₂₆H₅₄, n-C₂₇H₅₆, n-C₂₈H₅₈, n-C₂₉H₆₀, n-C₃₀H₆₂, n-C₃₁H₆₄, n-C₃₂H₆₆, n-C₃₃H₆₈, stigmasterol, β-sitosterol and two unidentified compounds: a saturated ester (mp 79-81°C); an unsaturated alcohol (mp 87-88°C) were isolated from the whole herb of Moghania strotilifera.     

NMR study of molecular motion in oriented long-chain alkanes. III. Oriented n-C32H66

The NMR second moment of a uniaxially oriented mat of single crystals of n-C₃₂H₆₆ (in the orthorhombic form) was measured at temperatures from ?170°C to 70°C and at various alignment angles γ between the orientation axis (preferential direction of the molecular chains) and the NMR magnetic field. Accurate expressions are given for the NMR second moment of an orthorhombic normal paraffin C_nH_2n+2 of arbitrary molecular chain length n for n ≥ 10, in the following states of molecular motion: no motion (a rigid lattice), rotation of CH₃ groups, and rotation of the chains around their axes with superimposed rotation of CH₃ groups. In addition to these well-known motions, n-C₃₂H₆₆ is found to exhibit an α process. The corresponding decrease of the NMR second moment shows the dependence on γ predicted for “flip-flop” motion, i.e., rotational jumps of the chain molecules around their axes through 180° and a simultaneous translation along these axes by one CH₂ group. The overall decrease in second moment occuring at the transition to the hexagonal rotator phase in n-C₃₂H₆₆ can be quantitatively accounted for. The dependence of this decrease on the alignment angle γ, however, is in disagreement with calculations based on a simple rotation of the chains around their axes. Considerable torsion of the chains superimposed on the rotation would improve agreement between theory and experiment.     

Rate coefficients for the reactions of hydrogen atoms with 1-bromopropane, 2-bromopropane, 1-bromobutane,and 2-bromobutane

The rate coefficients for the reactions of hydrogen atoms with n-C₃H₇Br, s-C₃H₇Br, n-C₄H₉Br, and s-C₄H₉Br were determined in a discharge flow-reactor at 298 K and a pressure of 4 mbar. Molecular-beam sampling and subsequent mass-spectrometric detection with electron-impact ionisation was used for the measurement of the bromo-hydrocarbon concentration. The rate coefficients obtained are (in 10¹⁰ cm³ mol⁻¹ s⁻¹): 2.3±1.2 for n-C₃H₇Br, 2.3±1.2 for s-C₃H₇Br, 2.4±1.2 for n-C₄H₉Br, and 2.8±1.4 for s-C₄H₉Br. The results are compared with predictions from bond-energy bond-order (BEBO) calculations, where a reasonable agreement is found. Furthermore, also by BEBO calculations, the relative importance of bromine abstraction as compared to hydrogen abstraction is estimated. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 721–727, 1998     

Copolymers of Maleic Anhydride and Methylene Alkanes: Synthesis,Modification, and Pour Point Depressant Properties

Copolymers with the equimolar composition and presumably alternating microstructure are synthesized by the radical copolymerization of methylene alkanes, the products of dimerization of α-olefins with the general formula RCH₂CH₂C(=CH₂)R (R = n-C₄H₇, n-C₆H₁₃, n-C₈H₁₇, n-C₁₀H₂₁, n-C₁₂H₂₅), with maleic anhydride. The products of reactions between the obtained copolymers and 1-octadecanamine or 1-octadecanol are isolated and spectrally characterized. The depressor efficiency of the copolymers with respect to the solutions of paraffins in n-alkanes is studied. Qualitative differences between the copolymers of maleic anhydride with methylene alkanes and reference copolymers based on 1-octadecene are estimated using vibrational viscometry combined with analysis of the size and morphology of paraffin crystals. It is shown that the copolymers with methylene alkanes more effectively decrease the cold filter plugging point (CFPP) of paraffin solutions in n-decane.     

Subsolidus binary phase diagram of (n-CnH2n+1NH3)2ZnCl4 (n?=?14, 16, 18)

The thermotropic phase solid–solid transitions compound (n-C _n H_2n+1NH₃)₂ZnCl₄ (n = 14, 16, 18) were studied, and a series of their mixtures were prepared. These laminar materials contain bilayers sandwiched between metal halide layers. The low temperature crystal structures of the pure salts are characteristic of the piling of sandwiches in which a two-dimensional macro-anion ZnCl₄ ²⁻ is sandwiched between two alkylammonium layers. These layers become conformationally disordered in the high temperature phases. The subsolidus binary phase diagrams of (n-C₁₄H₂₉NH₃)₂ZnCl₄-(n-C₁₈H₃₇NH₃)₂ZnCl₄ and (n-C₁₆H₃₃NH₃)₂ZnCl₄-(n-C₁₈H₃₇NH₃)₂ZnCl₄ were established by differential thermal analysis and X-ray diffraction. In each phase diagram, an intermediate compound and two eutectoid invariants were observed. There are three noticeable solid solution ranges (α, β, γ) at the left boundary, right boundary, and middle of the phase diagram.     

Distribution of weight,density, and molecular weight in crude oil derived from computerized capillary GC analysis

Chromatographic separation of crude oil components has been performed on a 50 m Chrompack Sil 5 fused silica capillary column, temperature programmed from 10 to 300°C. Approximately 70 peaks eluting before n-nonane (n-C₉) and all normal paraffins to n-C₁₉ were identified by a retention time table. Peak areas were converted to weight % using 1-heptene as internal standard and relative response factors. Components were divided into boiling range groups from n-C₆ to n-C₁₉. Paraffinic, naphthenic, and aromatic distributions were obtained for the boiling point fractions up to n-C₉. Group average densities and molecular weights were calculated from pure component properties up to n-C₉. Knowing the density and molecular weight as functions of boiling range group to n-C₉, these functions can be extrapolated to n-C₁₉, based on data and correlations from more than 20 distillations of paraffinic North Sea oils adn condensates. The densities and molecular weights of the C₁₀+ and the C₂₀+ residues were calculated to satisfy a balance of weight, volume, and number of moles for the whole sample. Measurements on the residues were used to cross-evaluate the GC method against distillation. The difference in weight was estimated to be less than ± 0.5% in absolute terms for the C₁₀+ residue. The corresponding figure for C₂₀+ was ± 2%. Relatively, calculated densities are within ± 1%, molecular weights within ± 2% compared to direct measurements. Calculations were performed by a BASIC program in a GC interfaced computer.     

Solubility of bromine derivatives of C<Subscript>60</Subscript>Br<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> fullerene in α-chloro- and α-bromonaphthalene in the temperature range 10–60°C

Isothermal saturation in ampoules was used to study the solubility of bromine derivatives of fullerene C₆₀Br _n (n = 6, 8, 24) in α-C₁₀H₇Cl and α-C₁₀H₇Br in the temperature range of 10–60°C. The corresponding solubility polytherms were characterized, and the compositions of the equilibrium crystal solvates and the density of the saturated solutions of C₆₀Br _n were determined.     

Low-frequency Raman-active vibrations of triclinic n-paraffins

The low-frequency Raman spectra of triclinic n-paraffins, n-C₈H₁₈ through n-C₂₄H₅₀, were observed. The normal-coordinate treatments of crystal vibrations of n-C₈H₁₈ through n-C₁₈H₃₈ were carried out. Six characteristic series of the observed Raman lines were assigned to rotatory lattice vibrations and intramolecular skeletal vibrations.     

Polymerization of 1-methylthio-1-alkynes and polymer properties

Polymerization of 1-methylthio-1-alkynes (MeSC?CR; R = Et, n-Bu, n-C₆H₁₃, and n-C₈H₁₇) was studied by use of transition metal catalysts. A 1 : 2 mixture of MoCl₅ and Ph₃SiH provided polymers having M?_w over 1 × 10⁵ in 30–50% yields from these monomers. The length of the alkyl group hardly affected the polymerization. The monomer, MeSC?C-n-C₆H₁₃, showed low reactivity in homopolymerization, but higher reactivity than that of MeC?C-n-C₅H₁₁ in copolymerization. Poly(1-methylthio-1-alkyne)s were colorless solids, and those with long alkyl pendants (R = n-C₆H₁₃, n-C₈H₁₇) were soluble in various organic solvents. The present polymers were thermally more stable than poly(2-alkyne)s, the corresponding hydrocarbon polymers.     

The release of cephanone in CTAB/n-C5H11OH/H2O system

Controlled release of cephanone from hexadecyltrimethylammonium bromide (CTAB) micelles and CTAB/n-C₅H₁₁OH/H₂O microemulsions was studied. The results showed that the release rate of cephanone was reduced in CTAB micelles and CTAB/n-C₅H₁₁OH/H₂O microemulsions, because of the solubilization of cephanone in micelles and microemulsions. The release of cephanone from CTAB micelles and CTAB/n-C₅H₁₁OH/H₂O microemulsions was characterized by Fickian diffusion and non-Fickian diffusion.     

Observation of multiple phase transitions in some even n-alkanes using a high resolution and super-sensitive DSC

The phase transitions of even n-alkanes, n-C₃₄H₇₀, n-C₃₆H₇₄, n-C₄₀H₈₂ and n-C₄₂H₈₆ with high purity have been measured using a high resolution and super-sensitive DSC. A new transition in the low temperature phase was observed in all the samples in the heating run. The surface freezing phenomenon was observed by thermal measurement for the first time in all the samples both in the heating and in the cooling run. The difference of the thermal behaviors between the heating and cooling run was also observed in all the samples.     

Preparation and thermal properties of asymmetrically substituted poly(silylenemethylene)s

Poly(silylenemethylene)s of the types [SiMeRCH₂]_n and [SiHRCH₂]_n were prepared by the ring-opening polymerization (ROP) of 1,3-disilacyclobutanes (DSCBs) containing n-alkyl substituents, such as C₂H₅, n-C₃H₇, n-C₄H₉, n-C₅H₁₁, and n-C₆H₁₃, or a phenyl group on the Si. These new polymers include a monosilicon analog of poly(styrene), [SiHPhCH₂]_n. Improved synthesis routes to the DSCB monomers were developed which proceed through Grignard ring closure reactions on alkoxy-substituted chlorocarbosilanes. All of these asymmetrically substituted polymers were obtained in high molecular weight form, except for [SiHPhCH₂]_n. The configurations of all of the polymers were found to be atactic. The aryl-substituted polymers have higher glass transition temperatures (T_gs) and thermal stability than those of the alkyl-substituted poly(silylenemethylene)s. Unlike the polyolefins of the type [C(H)(R)CH₂]_n, where T_g drops continuously from R = Me to n-Hex, the T_gs of the n-C_nH_2n+1 (n = 2–6)-substituted [SiMeRCH₂]_n PSM's appear to reach a maximum (at −61°C) for the R = n-Pr-substituted polymer. Moreover, where it was possible to make direct comparisons among similarly substituted atactic polymers, all of the poly(silylenemethylene)s were found to have lower T_gs than their all-carbon analogs. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3193–3205, 1997     

13C n.m.r. studies of organosilanes: II—substituent chemical shift parameters for alkoxysilanes

The ¹³C n.m.r. spectra of forty alkoxysilanes of the general type X_nSi(OR)_4–n (X = CH₃, C₆H₅, H; R = CH₃, C₂H₅, n-C₃H₇, i-C₃H₇, n-C₄H₉, i-C₄H₉, s-C₄H₉, n-C₅H₁₁, CH(CH₃)(C₆H₅), C₆H₅) have been recorded and assigned. The chemical shifts of the α-carbon resonances of the alkoxy groups are shown to depend on both the nature of the alkoxy group and the number and type of substituents on the silicon. Regression analyses of the data give empirical substituent chemical shift (SCS) parameters for the silyl substituents. The β-carbon resonances are shown to be dependent on the presence of the silyl group, but not the specific silyl substituents.     

Electron crystallography of epitaxially grown paraffin

Three-dimensional electron diffraction data from the epitaxially crystallized paraffin n-C₃₆H₇₄ are investigated in a structure analysis and are found to give a reasonable image of the structure, in agreement with the earlier x-ray determination. An inconsistency in the refined isotropic temperature factors from different zonal projections, however, indicates the necessity for a more accurate physical model for epitaxially grown crystals which will account for a large spread of diffraction peaks along reciprocal lattice lines parallel to the projection axis.     

Evaluated and estimated kinetic data for phase reactions of the hydroperoxyl radical

Methods are discussed for the production and detection of the hydroperoxyl radical for use in gas phase kinetic studies. Rate constants for gas phase reactions of the hydroperoxyl radical with itself, H₂, H₂O, CO, NO, SO₂, O₃, C₂H₆, C₃H₈, i-and n-C₄H₁₀, C₂H₄, i-C₄H₈, HCHO, C₂H₅CHO, n-C₃H₇CHO, Br, O, OH, and H are critically evaluated. Recommended or estimated rate constant expressions with associated error limits are given applicable over specified temperature ranges (normally 300–1000°K). The reactivity of HO₂ compared with OH, O, H, F, Cl, Br, CH₃, and CH₃O is presented in tabular form and the implications for atmospheric chemistry are discussed.     

Disproportionation reactions between alkyl and fluoroalkyl radicals. VI. Difluoromethyl and n-propyl radicals

Cross-disproportionation to combination ratios for CF₂H and n-C₃H₇ radicals have been determined (the hydrogen acceptor radical is given first) to be Δ(n-C₃H₇, CF₂H) = 0.30 ± 0.01 and Δ(CF₂H, n-C₃H₇) = 0.057 ± 0.006.     

A new conformer of 1,4,7‐tris(p‐tolylsulfonyl)‐1,4,7‐triazacyclononane

A second polymorphic form (form II) of the previously reported 1,4,7‐tris(p‐tolylsulfonyl)‐1,4,7‐triazacyclononane (form I), C₂₇H₃₃N₃O₆S₃, is presented. The molecular structures of the two forms display very different conformations, thus prompting the two forms to crystallize in two different space groups and exhibit quite diverse crystal structure assemblies. Form I crystallizes in the triclinic space group P, while form II crystallizes in the monoclinic space group P2₁/n. The main differences between the two molecular structures are the conformations of the p‐tosyl groups relative to each other and to the macrocyclic ring. The resulting crystal packing displays no classical hydrogen bonds, but different supramolecular synthons give rise to different packing motifs.     

Subsolidus phase diagram of binary system in the perovskite type layer compounds (<Emphasis Type="Italic">n</Emphasis>-C<Subscript>n</Subscript>H<Subscript>2n+1</Subscript>NH<Subscript>3</Subscript>)<Subscript>2</Subscript>MnCl<Subscript>4</Subscript>

The thermotropic phase transitions in the perovskite type layer compound (n-C₁₀H₂₁NH₃)₂MnCl₄ and (n-C₁₄H₂₉NH₃)₂MnCl₄ were synthesized and, at the same time, a series of their mixtures C₁₀Mn-C₁₄Mn were prepared. The experimental binary phase diagram of C₁₀Mn-C₁₄Mn was established by differential thermal analysis (DTA), IR and X-ray diffraction. In the phase diagram new material (n-C₁₀H₂₁NH₃)(n-C₁₄H₂₉NH₃)MnCl₄ and two eutectoid invariants were observed, two eutectic points temperatures are about 29.8 and 27.9°C. Contrasting other similar system, there are three noticeable solid solution ranges (α, β, γ) at the left and right boundary and middle of the phase diagram.