Grafting onto Wool. XV. Graft Copolymerization of MA and MM A by Use of Mn(acac)3 as Initiator

Graft copolymerization of acceptor monomers MA and MMA onto Himachali wool fiber in an aqueous medium was studied by using Mn(acac)s as initiator. Nitric acid was found to catalyze the graft copolymerization. Percentage of grafting and percent efficiency have been determined as functions of the concentration of chelate, nitric acid, monomer, time, and temperature, Under optimum conditions, MMA produced a maximum grafting of 82.5% while MA afforded maximum grafting to the extent of 27.5%. Relative reactivities of MA and MMA toward grafting have been compared with those of EA, BA, and VAc reported earlier from this laboratory. Different vinyl monomers were found to follow the following reactivity order toward grafting onto wool fiber in the presence of Mn(acac)₃: MMA > EA > BA > MA > VAc. An attempt has been made to explain the observed reactivity pattern shown by different vinyl monomers in graft copolymerization reactions.     

Grafting onto Gelatin. II. Graft Copolymerization of Ethyl Acrylate and Methyl Methacrylate onto Gelatin in the Presence of Ce4+ as Redox Initiator

In order to initiate a comprehensive study of graft copolymerization of vinyl monomers onto soluble protein-gelatin, we have studied grafting of ethyl acrylate (EA) and methyl methacrylate (MMA) onto gelatin using eerie ammonium nitrate (CAN) and eerie ammonium sulfate (CAS) as the redox initiator in an aqueous medium. A small amount of mineral acid (HNO₃ with CAN and H2SO4 with CAS) was found to catalyze the graft copolymerization. Graft copolymerization reactions were carried out at different temperatures. Maximum grafting occurred at 65°C both with EA and MMA. Percentage grafting has been determined as function of 1) concentration of monomer (EA and MMA), 2) concentration of initiator (CAN and CAS), 3) concentration of acid (HNO3 and H2SO4), 4) time, and 5) temperature.     

Grafting onto wool. XXV. Effect of acids on γ-radiation-induced graft copolymerization of methyl methacrylate onto wool fiber

Graft copolymerization of methyl methacrylate (MMA) onto Himachali wool fiber has been investigated in aqueous medium by using γ irradiation from a 2100 Ci⁶⁰CO source as means of initiation. Graft copolymerization was carried out by the mutual method in nitrogen atmosphere as well as in air. Effect of mineral acids and acetic acid on percentage of grafting was studied. Percentage of grafting was determined as functions of total dose, concentration of monomer, and concentration of acids. Maximum percentage of grafting in the presence of acids occurred in nitrogen atmosphere at a total dose of 1.05 MR. All the acids were found to influence grafting and the reactivity of different acids towards graft copolymerization was found to follow the order: H₂SO₄ > HCl > HNO₃ > HC1O₄ > HOAc. An attempt has been made to explain the reactivity order of different acids in the light of the mechanism proposed for γ-irradiation-induced graft copolymerization of vinyl monomer onto wool fiber.     

Grafting onto Wool. XXVI. Graft Copolymerization of Vinyl Monomers by Use of Cr(acac)3-TBHP as Initiator

Methyl methacrylate (MMA), methyl acrylate (MA), and ethyl acrylate (EA) have been graft copolymerized onto wool fiber in aqueous medium using the chromium acetylacetonate-tertiary-butyl hydroperoxide (Cr(acac)₃-TBHP) system as initiator. The percentage of grafting has been determined as a function of the concentrations of monomer, chelate, and TBHP, and the time and temperature under optimum conditions. MMA produced a maximum grafting of 119.8%, MA produced a maximum grafting of 56%, while EA afforded maximum grafting to the extent of 41.9%. Different vinyl monomers were found to follow the following reactivity order toward grafting onto wool fiber in the presence of the Cr(acac)₃-TBHP system: MMA > MA > EA.     

Grafting Vinyl Monomers onto Silk Fibers: Graft Copolymerization of Vinyl Monomers onto Silk Using the Vanadyl Acetylacetonate Complex

Abstract

The graft copolymerization of methyl methacrylate (MMA) onto mulberry silk fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases with increasing concentration of HCIO₄ and with increasing temperature. Inhibitors like picryl chloride and hydroquinone significantly decrease the extent of grafting. Alcoholic solvents at a solvents/water ration of 10:90 seem to constitute the most favorable medium for grafting. A suitable reaction scheme has been proposed, and the activation energy calculated from the Arrhenius plots.     

Grafting onto poly(vinyl alcohol). II. Graft copolymerization of methyl acrylate and vinyl acetate and their binary mixture using γ-rays as initiator

Methyl acrylate (MA), vinyl acetate (VAc) and their binary mixture (MA + VAc) have been graft copolymerized onto poly(vinyl alcohol) using γ-rays as initiator by mutual radiation method in aqueous medium. The optimum conditions for affording maximum grafting have been evaluated. The percentage of grafting has been determined as a function of total dose, concentrations of poly(vinyl alcohol), MA, VAc, and their binary mixture. Rate of grafting (R_p) and induction period (I_p) have been determined as a function of total initial mixed monomer concentration and concentration of poly(vinyl alcohol). The graft copolymer has been characterized by thermogravimetric method. The effect of donor monomer (vinyl acetate) on percent grafting of acceptor monomer (methyl acrylate) has been explained.     

Grafting onto Wool. XXVII. Graft Copolymerization of MixeD Vinyl Monomers by Use of Ceric Ammonium Nitrate as Redox Initiator

In order to ascertain the effect of a donor monomer, vinyl acetate (VAc), on the graft copolymerization of acceptor monomers, ethyl acrylate (EA) and butyl acrylate (BA), grafting of mixed vinyl monomers (EA + VAc) and (BA + VAc) was carried out on Himachali wool in aqueous medium using ceric ammonium nitrate (CAN) as a redox initiator. Graft copolymerization was carried out at different temperatures for various reaction periods. Percent grafting and percent efficiency were determined as functions of 1) concentration of mixed vinyl monomers, 2) concentration of CAN, 3) concentration of HNO₃ 4) temperature, and 5) reaction time. VAc, the donor monomer, was found to decrease percent grafting of EA and BA onto wool.     

Reaction of poly(vinyl alcohol) with potassium persulfate and graft copolymerization

A study of the oxidation of poly(vinyl alcohol) (PVAL) by potassium persulfate (KPS) in aqueous solutions showed that the decomposition of KPS was greatly enhanced by the presence of PVAL, its hydroxyl groups being oxidized to ketones in a yield of about one mole of ketone from one mole of KPS. The decomposition rate of KPS was found to be given by the equation, ?d[S₂O₈^2?]/dt = k[S₂O₈^2?] [PVAL]^1/2, which was essentially the same as in the oxidation of alcohols of low molecular weight by persulfate ion. The occurrence of gelation of PVAL solutions and graft copolymerization of methyl methacrylate (MMA) onto PVAL in the presence of KPS was evidence for PVAL radical as an intermediate species in the oxidation of PVAL. A characterization study was also carried out for the reaction products of the graft copolymerization of MMA onto PVAL with KPS in dimethyl sulfoxide solution.     

Grafting onto cellulose. VIII. Graft copolymerization of poly(ethylacrylate) onto cellulose by use of redox initiators. Comparison of initiator reactivities

In an attempt to compare the relative reactivities of different redox systems in graft copolymerization of vinyl monomers onto cellulose, we studied grafting of ethylacrylate (EA) in aqueous medium by using the well-known redox intiator, ferrous ammonium sulfate–potassium persulfate (FAS–KPS) system, and its reactivity was compared with that of Fenton's reagent (Fe²⁺ ?H₂O₂) towards grafting of EA onto cellulose. Optimum conditions for affording maximum grafting were evaluated and percent grafting is expressed as functions of different reaction variables. Evidence of grafting was obtained from IR spectroscopic measurements, SEM, and TGA studies of the grafted and ungrafted cellulose. A plausible explanation for the observed reactivity pattern shown by (FAS–KPS) and (FAS–H₂O₂) redox systems is offered. Fenton's reagent (Fe²⁺ ?H₂O₂) was found to be several times more reactive than (FAS–KPS) redox system.     

Grafting vinyl monomers onto silk fibers. IX. Graft copolymerization of methyl methacrylate onto silk using peroxydiphosphate-thiourea redox system

The graft copolymerization of methyl methacrylate (MMA) onto silk in aqueous media initiated by the potassium peroxydiphosphate-thiourea redox system was studied at 50°C. The rate of grafting was determined by changing [monomerl], [thiourea], [initiator], acidity of the medium, reaction medium, and temperature. A significant increase percent of grafting was noticed with increasing monomer concentration to 84.49 × 10^?2 mole/liter and the further increase is associated with the decrease of graft yield. The graft yield increases with an increase of thiourea (Tu) concentration to 25 × 10^?5 mole/liter; then it decreases. A measurable increase in graft yield was observed with an increase in acidity of the medium. Graft yield increases to a certain temperature, i.e., 50°C, and then it decreases. The graft yield increases with an increase of initiator concentration to 60 × 10^?4 mole/liter; then it decreases. The graft yield is medium dependent. A suitable kinetic path has been proposed and the rate equation has been derived.     

Atom transfer graft copolymerization of 2‐ethyl hexylacrylate from labile chlorines of poly(vinyl chloride) in an aqueous suspension

Copper‐mediated atom transfer radical polymerization (ATRP) is presented as a versatile tool for the graft copolymerization of 2‐ethyl hexylacrylate with poly(vinyl chloride) (PVC) in an aqueous suspension. The appreciable solubility of PVC in 2‐ethyl hexylacrylate (30%) at temperatures around 130 °C makes grafting of the monomer possible from labile chlorines of PVC in aqueous suspensions without the use of additional solvent. The first‐order kinetics (rate constant k = 4.2 × 10^?6 s^?1) of the mass percentage increase reveals a typical ATRP fashion of the graft copolymerization at low conversions. The use of a completely organosoluble copper(I) complex of hexylated triethylene tetramine, in combination with α‐methylcellulose as a stabilizer, makes the graft copolymerization possible in a dispersed organic phase. Nearly spherical, green particles can be obtained with moderate stirring rates (1000 rpm) in high graft yields. Although the kinetics of the reaction deviates from the first order at high conversions, reasonable graft yields (146%) can be attained within a reaction period of 24 h. In this study, the reaction conditions of the grafting have been studied, and graft products have been confirmed by common techniques such as ¹H NMR, gel permeation chromatography, and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1900–1907, 2006     

Graft copolymers of polyurethane with various vinyl monomers via radiation-induced miniemulsion polymerization: Influential factors to grafting efficiency and particle morphology

Graft copolymers of polyurethane (PU) with various vinyl monomers were synthesized through a one-pot but two-step miniemulsion polymerization process. Firstly, the polycondensation of isophorone diisocyanate (IPDI) with hydroxyl-terminated polybutadiene (HTPB) had been performed in aqueous miniemulsion at 40 °C in order to obtain PU dispersions. Consecutively, an in-situ graft copolymerization of the vinyl monomers with the synthesized PU was initiated by γ-ray radiation at room temperature. The grafting efficiency of PU with vinyl monomer (G_PU/monomer) was calculated from ¹H NMR spectra and the particle morphology of the final hybrid latex was observed by transmission electron microscopy (TEM). As there was no monomer transferring in miniemulsion system, homogenous hybrid particles would be synthesized provided that the monomer was miscible with PU, such as styrene. With the increase of the polarity of the monomer, the compatibility of PU with monomer decreased. G_PU/monomer varied as G_PU/styrene(37%)>G_{PU/butyl acrylate (BA)}(21%)>G_{PU/methyl methacrylate (MMA)}(12%). The proportion of homogeneous nucleation would increase as the hydrophilicity of the monomer increased. High temperature would destabilize the miniemulsion so as to result in a less grafting efficiency. Compared to the phase separation during the seeded emulsion polymerization, the miniemulsion polymerization method facilitated the preparation of homogeneous materials owing to its monomer droplet nucleation mechanism.     

Surface Functionalization of Sisal Fibers Using Peroxide Treatment Followed by Grafting of Poly(ethyl acrylate) and Copolymers

Grafting of poly(ethyl acrylate) and its copolymers was carried out on peroxide-treated sisal fibers. Effect of reaction conditions on graft parameters like rate of graft copolymerization and % grafting were studied. The kinetics of graft copolymerization of ethyl acrylate onto peroxide-treated sisal fibers was studied, and the rate expression for the graft copolymerization was found to be R_g = k[EA]^1.74[FAS]^0.51. Grafting of poly(EA) and copolymers onto peroxide-treated sisal fibers was confirmed by FT-IR spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction studies. Thermal stability and percentage crystallinity of sisal fibers were enhanced with peroxide treatment and graft copolymerization.     

Ascorbic Acid/H2O2-initiated Graft Copolymerization of Methyl Methacrylate onto Abelmoschus Esculentus Fiber: A Kinetic Approach

Graft copolymerization of methyl methacrylate onto lignocellulosic Abelmoschus esculentus fibers was successfully carried out in aqueous medium using ascorbic acid and hydrogen peroxide as redox initiator. Maximum percentage of grafting was achieved when the concentrations of ascorbic acid, hydrogen peroxide, and monomer were 3.85 × 10^?2, 2.41 × 10^?1, and 1.87 × 10^?1 mol/L respectively at a temperature of 45°C for a reaction time of 90 min. The kinetics of graft copolymerization was also studied, and it was found that the rate expression for graft copolymerization is (R_g) = K [Asc]^0.68[H₂O₂]^0.49[MMA]^1.17. The activation energy for graft copolymerization of MMA onto Abelmoschus fiber was found to be 12.48 KJ/mol. The graft copolymers thus formed were characterized by FT-IR spectroscopy, scanning electron microscopy and thermogravimetric analysis.     

Graft Copolymerization on to Cellulose Using Binary Mixture of Monomers

The graft copolymerization of acrylonitrile (AN) and ethyl acrylate (EA) comonomers onto cellulose has been carried out using ceric ammonium nitrate (CAN) as an initiator in the presence of nitric acid at 35±0.1°C. The addition of ethyl acrylate as comonomer has shown a significant effect on overall and individual graft copolymerization of acrylonitrile on cellulose. The graft yield (%G_Y) and other grafting parameters viz. true grafting (%G_T), graft conversion (%C_G), cellulose number (Ng) and frequency of grafting (G_F) were evaluated on varying the concentration of comonomers from 6.0–30.0×10^?1 mol dm^?3 and ceric (IV) ions concentration from 2.5–25×10^?3 mol dm^?3 at constant feed composition (f_AN 0.6) and constant concentration of nitric acid (7.5×10^?2 mol dm^?3) in the reaction mixture. The graft yield (%G_Y) and other grafting parameters were optimal at 15×10^?1 mol dm^?3 concentration of comonomers and at 10×10^?3 mol dm^?3 concentration of ceric ammonium nitrate. The graft yield (%G_Y) and composition of grafted chains (F_AN) was optimal at a feed composition (f_AN) of 0.6. The energy of activation (Ea) for graft copolymerization has been found to be 16 kJ mol^?1. The molecular weight (Mw) and molecular weight distribution (Mw/Mn) of grafted chains was determined by GPC and found to be optimum at 15×10^?1 mol dm^?3 concentration of comonomer in the reaction mixture. The composition of grafted chains (F_AN) determined by IR method was used to calculate the reactivity ratios of monomers, which has been found to be 0.62 (r₁) and 1.52 (r₂), respectively for acrylonitrile (AN) and ethyl acrylate (EA) monomers used for graft copolymerization. The energy of activation for decomposition of cellulose and grafted cellulose was determining by using different models based on constant and different rate (β) of heating. Considering experimental observations, the reaction steps for graft copolymerization were proposed.     

Ceric Ion Initiated Graft Polymerization onto Poly(vinyl Alcohol)

This paper describes the kinetics of the ceric ion-initiated graft co-polymerization of vinyl acetate-acrylonitrile to poly(vinyl alcohol). The graft copolymerization rate R_p was found to be first order with respect to the total concentration of the comonomer mixture [M], the concentration of vinyl alcohol repeating units [PVA], and the mole fraction of vinyl acetate in the comonomer feed mixture. R_p was independent of cerous ion. The grafting rate was independent of ceric ion above a ceric concentration of 0.0020 M but first order in ceric ion below that concentration. Rp initially increased rapidly with [H⁺] to a maximum and then decreased and levelled off at hgher [H⁺]. The rate of ceric ion disappearance was first order in [PVA], independent of [MI, and increased with increasing [H⁺] with a leveling off at high [H⁺]. A reaction mechanism.     

Grafting on crosslinked polymer beads by ATRP from polymer supported N-chlorosulfonamides

Grafting of methyl methacrylate (MMA) and ethyl acrylate (EA) monomers from immobilized N-chlorosulfonamide (NCSA) groups on crosslinked polystyrene-based beads have been achieved by copper mediated atom transfer radical polymerisation (ATRP) methodology. The initiation takes place via NCSA groups on the polymer, created by chlorination of crosslinked polystyrene sulfonamides. Using CuBr and hexacishexyl triethylenetetramine ligand for MMA and EA grafting showed a first order kinetics for each monomers.Polymers with 3.18 mmol g⁻¹ of NCSA groups have a progressive mass increase in accordance with increasing MMA graft polymerisation up to 380.0% grafting obtained after 6 h.By the method presented, grafting of MMA and EA have been successfully achieved with negligible amounts of free polymer formation (6.2%) in the solution. Hence grafting by ATRP through polymer supported NCSA is superior to the common radical grafting methods which are yielding free polymers simultaneously.The method provides an efficient procedure in preparing core-shell type of polymers, with retention of the bead shapes.     

Synthesis of casein-G-poly(vinyl acetate). II

Poly(vinyl acetate) was graft-copolymerized onto casein in the presence of potassium peroxydisulfate-ascorbic acid. The effect of synthetic variables on the rates of conversion of monomer (R_p), graft copolymerization (R_g), and homopolymerization (R_h), percent grafting, and grafting efficiency were investigated and the results, compared with the system initiated by peroxydisulfate alone.     

Effects of solvent in photo-induced graft copolymerization of vinyl monomers on cellulose

The effects of swelling of the sample and polymerization solvents were studied for photo-induced graft copolymerization of vinyl monomers on cellulose. The graft copolymerization of methyl methacrylate (MMA) was activated by swelling of the sample or organic solvent-water solutions within a certain range of their concentrations. Though each organic solvent gave a maximum in per cent grafting and the number of grafts at about 25 vol-% concentration, the initiation reaction scarcely took place at 100% concentration; thus, the solvent itself is considered to have a negative effect. The solvents used in the experiments were all hydrophilic, such as methanol, acetone, and dioxane. The average molecular weight of the grafted PMMA differed in each solvent, indicating a different characteristic effect of solvent on the growing grafted polymer radicals. The presence of ferric ion as a sensitizer stimulated further the contributions of the sample swelling and the organic solvents to the copolymerization reaction. A similar effect was observed for styrene as for MMA, but not for acrylic acid and methacrylic acid.     

Grafting onto wool. III. Graft copolymerization of poly(vinyl acetate) by use of fenton's reagent as initiator

In an attempt to modify fibrous protein, poly(vinyl acetate) has been graft copolymerized onto Himachali wool in an aqueous medium by using Fenton's reagent as redox initiator. Graft copolymerizations were carried out at 25, 30, 35, 40, and 45°C for a period of 3 hr. Percentage grafting was found to be dependent upon reaction temperature, concentration of monomers, and the molar ratio of [H₂O₂]/[Fe⁺²]. Maximum grafting occurred at 45°C with a molar ratio of [H₂O₂]/[Fe⁺²] = 1.43. A small amount of grafting (2.6–2.8%) occurred when grafting was effected at 45°C in the presence of Fe⁺² alone.