Effect of Chemical Structure and Charge Distribution on Behavior of Polyzwitterions in Solution

Summary: The hydrodynamic and conformational properties of polyelectrolyte poly(N,N-diallyl-N,N-dimethylammonium chloride) and its corresponding polybetaine poly(2-diallyl(methyl)ammonio)acetate) molecules in aqueous solutions with various ionic strength and pH, were studied by viscometry, static and dynamic light scattering methods. It was established that a 1 M NaCl solution is a thermodynamically good solvent for poly(N,N-diallyl-N,N-dimethylammonium chloride). In water solutions conformation of poly(2-diallyl(methyl)ammonio)acetate) molecules corresponds to polymer coil under θ–conditions. An increase in the concentration of NaCl in water and 0.1M NaOH solutions from 0 to 1 mol/l brings about a sharp gain in the intrinsic viscosity of the polymer and in the hydrodynamic radius of molecules. This effect results from the decomposition of zwitterion pairs responsible for the compact conformation of polymer molecules in water and 0.1 M NaOH. The Kuhn segment length for poly(2-diallyl(methyl)ammonio)acetate) molecules A = 6.3 nm determined in water and in 0.1 M NaOH solutions practically coincided with A value 6.6 nm, received in 1 M NaCl and in 0.1 M NaOH/1M NaCl. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in 1 M NaCl solutions A = 3.9 nm.     

Application of Polymer‐Modified Hanging Mercury Drop Electrode in the Indirect Determination of Certain β‐Lactam Antibiotics by Differential Pulse,Ion‐Exchange Voltammetry

A selective and sensitive polymer‐modified electrode was developed for β‐lactam antibiotics (cefaclor, amoxycillin and ampicillin) present in formulated and blood plasma samples for the quantitative analysis in aqueous environment. The detection was made using an ion‐exchange voltammetric technique, in differential pulse mode, on poly(N‐chloranil N,N,N′,N′‐tetramethylethylene diammonium dichloride)‐modified hanging mercury drop electrode of a three‐electrode system (PAR Model 303A) attached with a Polarographic Analyzer/Stripping Voltammeter (PAR Model 264A). Antibiotics, which are electroinactive compounds, were essentially converted to their electroactive oxazolone analogues through acid treatment under drastic conditions (0.1 mol L^?1 HCl, ～85 °C, 2 h). These analytes in the form of their respective oxazolones were indirectly analyzed by oxazolone entrapment in the polymeric film through ion‐exchange process at modified electrode surface (accumulation potential ?0.20 V (vs. Ag/AgCl), accumulation time 120 s, pH 7.4, KH₂PO₄‐NaOH buffer (ionic strength 0.1 mol L^?1), scan rate 10 mV s^?1, pulse amplitude 25 mV). The limit of detection of cefaclor‐derived oxazolone was found to be 2.12 nmol L^?1 (0.82 ppb, S/N 3, RSD 3.21%) in terms of cefaclor (a representative β‐lactam) concentration.     

Graft polymerization of acrylic monomers onto starch fractions. IV. Effect of reaction time on the grafting of butyl acrylate onto amylose

Studies were carried out on the grafting of butyl acrylate (BA) to amylose by the ceric ion method. After removing the homo-PBA with THF and toluene, and the ungrafted amylose with 0.5NNaOH, the PBA content of the graft copolymers was determined by acid hydrolysis with 1N HCl. The influence of reaction time on the grafting yields was determined and the largest values were: 82% for the grafting efficiency, 246% for the percent grafting, 62% for the grafted amylose, 48% for the grafted PBA, and 64% for the total conversion.     

Graft polymerization of acrylic monomers onto starch fractions. I. Effect of reaction time on grafting methyl methacrylate onto amylose

A study was made of the ceric-ammonium-nitrate-initiated graft polymerization of methyl methacrylate (MMA) onto a lineal fraction of starch (amylose). Grafting yields were determined by extraction with appropriate solvents: 1,2-dichloroethane for homo-PMM, and 0.5N NaOH for ungrafted amylose. Percent grafting was calculated by acid hydrolysis with 1N HCl. Molecular weights of PMMA side chains were determined by gel permeation-chromatography. Grafting efficiencies ranged from 72 to 83%, grafting, from 190 to 271%, and frequency of attachment of side chains, from 900–1250 glucose units per chain. The results observed are discussed.     

Potentiometric titration behavior of poly(acrylic acid) within a cross-linked polymer network having amide groups

This study aimed to investigate the effect of COOH group distribution within a polymer network having amide groups, with which the COOH could form hydrogen bonds. We employed here two polyelectrolyte gels composed of N-isopropylacrylamide (NIPA) networks, either copolymerized with acrylic acid (AA) or within which poly(acrylic acid) (PAA) was entrapped. Both gels (AA–NIPA ∼ 1:4 mol/mol) were prepared by aqueous red-ox polymerization with N,N’-methylenebisacrylamide as the cross-linker. Finely divided gels in NaCl solutions (0.025 and 0.1 M) were titrated with NaOH and back-titrated with HCl at 25 °C. The results of the copolymer gel (CG) agreed well with those of a linear copolymer and a nanoscale gel which had a similar AA content to CG. However, marked differences were observed in the titration behaviors of the AA-copolymerized and PAA-entrapped gels, mainly due to the hydrogen bonding between the entrapped PAA chain and its surrounding NIPA network.     

Adenine and thymine grafts on polyethyleneimine

Graft polymers of three different molecular weights of polyethyleneimine (PEI) with 9-(vinylsulfonylethyl) (9-VSE)-adenine and 1-(vinylsulfonylethyl) (1-VSE)-thymine were prepared. PEI's having molecular weights of 600, 1200, and 1800 were used and various ratios of VSE-nucleobases to ethyleneimine were employed in the grafting process. As expected, a decrease in the nucleobase substitution in the resulting graft polymer resulted in an increase in its water solubility. The degree of substitution in the graft polymers was calculated from sulfur determinations: in most cases this degree of substitution indicated that not all of the VSE derivative has reacted with the PEI due to the highly branched nature of the latter. The presence of nucleobase stacking in the polymers was studied by UV spectroscopy. Stacking was observed for the adenine polymers in both DMSO and 0.1N HCl while stacking in the thymine polymers was observed in 0.1N HCl but not in DMSO. The absence of stackingwithin the thymine polymers in DMSO was attributed to complexation of primary amino groups of the PEI backbone with the pyrimidine ring.     

Forced Degradation Study on Gliclazide and Application of Validated Stability-Indicating HPLC-UV Method in Stability Testing of Gliclazide Tablets

Forced degradation study on gliclazide was conducted under the conditions of hydrolysis, oxidation, dry heat and photolysis and an isocratic stability-indicating HPLC-UV method was developed and validated. All the seven degradation products (I–VII) formed under different conditions were optimally resolved on a C₁₈ column with mobile phase composed of 40% acetonitrile and 60% ammonium acetate solution (0.025 M, pH 3.5) at a flow rate of 0.25 mL min^?1 using 235 nm as detection wavelength. The method was linear between 5–500 μg mL^?1 drug concentrations. The %RSD of intra- and inter-day precision studies was <1 and <2% respectively. Excellent recoveries (99.81–100.97%) proved the method sufficiently accurate. Each peak resolved always with a resolution of >1.90 indicating the method to be rugged enough. The method was used to study the drug degradation behaviour under the forced conditions. Four degradation products (I–IV) were formed in 0.1 N HCl and water whereas only I and III were formed in 3% H₂O₂. Two new products V and VI in addition to I, III and IV were formed in 0.1 N NaOH. The drug was stable to thermal and photolytic decomposition. The degradation behaviour in water and 0.1 N NaOH was similar under dark and light conditions but a new product VII was formed in 0.01 N HCl in light. In general, the rate of degradation was accelerated by the light. The method was applied successfully in stability testing of gliclazide tablets.     

Das Trihydrochlorid-monohydrat der N-(Pyrid-2-ylmethyl)ethylendiamin-N,N′,N′-triessigsäure und ihr Lanthan(III)-Komplex

The Trihydrochloride Monohydrate of N -(Pyrid-2-ylmethyl)ethylenediamine- N , N′ , N′ -triacetic Acid and its Lanthanum(III) Complex We report the results of the investigation of N-(pyrid-2-ylmethyl)ethylenediamine-N,N′,N′-triacetic acid (H₃pedta) and its complexes with rare earth metal ions. The X-ray crystal structures of H₃pedta · 3 HCl · H₂O and of the lanthanum(III) complex [La(pedta)(H₂O)] · 2 H₂O were determined. The complex forms a polymer, lanthanum(III) has coordination number 10, one water molecule is coordinated. The water degradation of H₃pedta · 3 HCl · H₂O and of the complex was investigated by thermoanalysis. Luminescence studies of the corresponding europium(III) complex in aqueous solution show three coordinated water molecules.     

Ultra-high-speed liquid chromatography combined with mass spectrometry detection analytical methods for the determination of nitrosamine drug substance-related impurities

In the present study, five simple, feasible, and sensitive Ultra-high-speed liquid chromatography combined with mass spectrometry detection methods, using electrospray ionization are proposed. These methods were developed and validated for the determination of four different nitrosamine drug substance-related impurities—N-nitrosoacebutolol, N-nitrosobisoprolol, N-nitrosometoprolol, and N-nitrososotalol—in five beta blockers active pharmaceutical ingredients—acebutolol HCl, bisoprolol fumarate, metoprolol tartrate, metoprolol succinate, and sotalol HCl. The proposed methods were validated as per regulatory guidelines. Acquity HSS T3 (3.0 × 100 mm, 1.8 μm) column and formic acid 0.1% in water combined with methanol or acetonitrile were used for chromatographic separation in all methods. The limit of detection and the limit of quantification were found to be in the range of 0.02–1.2 and 2–20 parts per billion, respectively. The accuracy and precision of the five methods have been demonstrated in the working range of each one, giving values of recovery within the range of 64.1%–113.3%, and the regression coefficients (R) were found to be in the range of 0.9978–0.9999. These methods could be used for controlling nitrosamine drug substance-related impurities content for beta blockers drug substances batches manufactured at Moehs group.     

A study of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions

The stability of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions was studied. 2,6-Bis(4-tert-butylphenyl)benzo[1,2-d;4,5-d′]bisoxazole (1) dissolved in acetonitrile containing sulfuric acid and water at 80°C is stable. A suspension of 2,6-bis[4-(2-benzoxazoyl)phenyl]benzo[1,2-d;5,4-d′]bisoxazole (2) in 0.2 N H₂SO₄ or 0.2 N NaOH solution at 100°C for 21 days is stable. The intrinsic viscosity of a poly(p-phenylene)benzobisoxazole (PBO) fiber sample soaked in 0.2 N H₂SO₄, water with 1 wt % polyphosphoric acid (PPA), or 0.2 N NaOH remained the same. Under very severe hydrolytic conditions such as dissolution of compound 2 or PBO in PPA or methanesulfonic acid with residual water followed by coagulation in water, benzobisoxazole underwent bond cleavage to generate carboxylic acid and o-aminophenol functional groups. This is in contrast to an earlier hypothesis that the decrease in intrinsic viscosity under these conditions was due to chain association. Poly(p-phenylene)benzobisthiazole (PBT) also underwent bond cleavage under these very severe conditions, which are unlikely to be encountered in normal applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2637–2643, 1999     

Some analytical applications of aromatic sulfonyl haloamines: Estimation of indigocarmine by chloramine-B,bromamine-T,and dibromamine-T

Sodium N-chlorobenzenesulfonamide (chloramine-B, CAB), sodium N-bromo-p-toluenesulfonamide (bromamine-T, BAT) and N,N′-dibromo-p-toluenesulfonamide (dibromamine-T, DBT) are employed as analytical reagents for estimating indigocarmine (IC) in solution. A four-electron stoichiometry is observed within 30 min in the following media: CAB, 0.1–1.0 N HCl or H₂SO₄ and pH 1 buffer; BAT, 0.01–0.10 N NaOH; DBT, glacial acetic acid. The back titration methods are fairly rapid, simple, and accurate. The product of oxidation, isatinsulfonate, was estimated by spectrophotometric measurements at 410 nm. The sulfonamides formed by reduction of the haloamines are detected by TLC and paper chromatography.     

A study of the stability of pyrimidine series cytostatics,Ftorafur and 5-fluorouracil: The effect of oxidation on the stability of Ftorafur and 5-fluorouracil

The stability of 1% solutions of cytostatics Ftorafur and 5-fluorouracil was studied during oxidation with hydrogen peroxide in alkaline (0.1 N NaOH), acidic (0.1 N H₂SO₄), and weakly acidic (pH 5) solutions by thin-layer chromatography. The decrease in the cytostatic content was monitored spectrophotometrically in the uv region. The greatest decrease in the cytostatic content occurred in alkaline solutions, where the pyrimidine ring opened between N3 and C4 and between C6 and N1, with formation of urea.     

Speciation of Selenium in Enriched Garlic Sprouts by High-Performance Liquid Chromatography Coupled with Inductively Coupled Plasma-Mass Spectrometry

Selenium species in enriched garlic (Allium Sativum L) sprouts were determined by high-performance liquid chromatography coupled with inductively coupled plasma-mass spectrometry (HPLC-ICP-MS). The garlic was grown in a 10 mg/L selenite nutrient solution, and the total selenium accumulated by the sprouts was 250 µg/g. Three mobile phase systems were investigated and a buffer of 20 mmol/L ammonium acetate/5% methanol was chosen for subsequent analysis. Comparative experiments were performed to determine the selenium species in the garlic sprouts with four extraction solutions: 0.1 mol/L HCl, 0.1 mol/L NaOH, 20 mmol/L ammonium acetate/5% methanol and protease XIV. The most suitable results were obtained using 0.1 mol/L HCl as the extracting solution. Validation was performed; all selenium compounds had recoveries of 102.5% to total selenium, with good linearity and precision. The major compound accumulated in the garlic sprouts was methylselenocysteine, which accounted for 65.01% of the selenium.     

Ion-molecular interactions and the equilibrium composition in the HCl-1-methyl-2-pyrrolidone-1,1,2,2-tetrachloroethane system according to IR spectroscopy data

Multiple Attenuated Total Reflectance (MATR) IR spectra of solutions of HCl in 1-methyl-2-pyrrolidone (N-MP) (0–43.4 % HCl) were studied in the 900–4000 cm^–1 range. Spectra were recorded for theN-MP-HCl-1,1,2,2-tetrachloroethane (TCE) ternary system at a TCE N-MP ratio of 1 1. Depending on the ratio between the components, complexes of the compositionN-MP · HCl (C-1),N-MP · 2HCl (C-2), and 2N-MP · HCl (C-3) are formed in the system. Complex C-1 has a quasiionic structure, (CH₂)₃N(Me)CO...H...Cl, formed by a strong quasisymmetrical H-bond between the carbonyl O atom and the Cl atom. The addition of anN-MP molecule to complex C-1 yields complex C-3, in which the quasiionic character of the bond betweenN-MP and HCl is retained. When excess HCl is present, the quasiionic structure is destroyed, theN-MP molecule is protonated, and the Cl^– anion interacts with HCl to give an ion with a strong symmetrical H bond (Cl...H...Cl)^–. Complex C-2 is an ion pair.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1757–1763, September, 1995.This work was carried out with financial support of the Russian Foundation for Basic Research (Project No. 93-03-18356).     

Electric Double Layer in Water-Organic Mixed Solvents: Titania in 50% Ethylene Glycol

Ethylene glycol (EG) and its mixtures with water are popular components of nanofluids used as heat transfer fluids. The stability of nanofluids against coagulation is correlated with their zeta potential. The electrophoretic mobility of titania nanoparticles in 50-50 w/w EG was studied as a function of the concentration of various solutes. HCl, NaOH, SDS and CTMABr at concentrations up to 0.01 M are strong electrolytes in 50% EG, that is, the conductance of their solutions is proportional to the concentration. HCl, NaOH and CTMABr were very efficient in inducing a high zeta potential for titania in 50% EG. NaOH induced a negative zeta potential in excess of 70 mV, and HCl and CTMABr induced a positive zeta potential in excess of 70 mV at concentrations below 10⁻⁴ M. Apparently, HCl, NaOH and CTMABr are also more efficient than SDS in terms of nanofluid stabilization against coagulation. An overdose of base (>1 mM) results in depression of the negative zeta potential. This result may be due to the specific adsorption of sodium on titania from 50% EG.     

Determination and speciation of selenium in water samples collected from Muğla (Turkey) province by hydride generation atomic absorption spectrometry

In this work, determination of selenium in various water samples was done by using hydride generation atomic absorption spectrometry. The most appropriate values of HCl concentration, NaBH₄ concentration, NaOH concentration, flow rate of argon and flow rate of waste solution were determined. The optimum concentration of the HCl, NaBH₄ and NaOH solutions were found to be 7.0 mol L^?1, 1.0% and 0.75%, respectively. The optimum flow rate of Ar gas and waste solution were also found to be 100.9 mL min^?1 and 4.0 mL min^?1, respectively. Values of LOD and LOQ were calculated separately for total Se and Se(IV). LOD and LOQ values were calculated 0.56 μg L^?1, 1.87 μg L^?1 for total Se and 0.72 μg L^?1, 2.40 μg L^?1 for Se(IV), respectively. The precision was evaluated by relative standard deviation (RSD%) was found to be 3.5% for total Se and 3.1% for Se(IV) (n = 11). A standard reference material (NIST 1643e) was used in order to check the accuracy of the proposed method. There was a good agreement between certified and found values for standard reference material. The method was applied to the analysis of total Se and Se(IV) concentrations in tap water samples collected from the various regions of Mu?la. Proposed method showed spike recovery ranges from 92% to 116% in water samples.     

Elektrophorese der halogenokomplexe von Hg(II), Bi(III), Cd(II), Pb(II) und -Cu(II) : Chlorokomplexe in chlorwasserstoffsäure

An apparatus for heavy-current and high-tension electrophoresis on filter paper is described This apparatus enables one to avoid the difficulties that occur in electrophoresis in base electrolytes that are highly concentrated or show greater electric conductivity The zones migrate along the paper strips with constant speed and, consequently, it is possible to measure the mobility The effective length of the filter paper strips is 660 mm Correction of the apparent mobility in the porous adsorbent is treated thoroughly.Diagrams of the electrophoretic mobility of the chloro-complexes of Hg(II), Bi(III), Cd(II), Pb(II), and Cu(II) in hydrochloric acid, are given in the experimental part The concentration of the hydrochloric acid varied between 0.1N and 6N In 6N HCl all the metals investigated are present asani onic complexes. Hg, Bi.Cd, and Pb chloro-complexes show a pronounced maximum of mobility in the anionic range. The sequence of the zones in the direction anode to cathode is Hg, B1, Cd, Pb, Lu al 0.1–2.3N HCl and B1, Hg, Cd, Pb.Cu at2.3–6N HCl.Finally, the electrophoretic separation of a mixture of Hg, Bi, Cd, Pb, Cu in 1N, 2N and 4N HCl is illustrated Complete separation of the zones was achieved in each experiment     

Determination of Al,Bi, Cd,Cr, Cu,Mn, Ni,Pb and Zn,in the ng/g range in high purity gallium by electrothermal vaporization AAS after preconcentration

Summary A method has been developed for the analysis of trace impurities in high purity gallium at nanogram level. The gallium is separated from the trace elements by partial dissolution and by solvent extraction as HGaCl₄ complex from 7N HCl with di-isopropyl ether. The aqueous phase containing the impurities is evaporated almost to dryness after adding 1 ml of 0.1N H₂SO₄, made up to 1 ml with 0.1N HCl and then analysed by atomic absorption spectrometry using electrothermal atomization. The limits of detection for the impurities lie in the range of 0.5 ng/g to 10 ng/g and the coefficient of variation varies from 1 to 5% at 50 ng/g level. The percentage recoveries for all the impurities are in the range 95–100%.

---

Bestimmung von Al, Bi, Cd, Cr, Cm, Mm, Ni, Pb und Zn im ng/g-Bereich in Reinstgallium durch AAS mit elektrothermischer Verdampfung nach Anreicherung

Zusammenfassung Ein Verfahren zur Bestimmung von ng-Mengen Verunreinigungen in Reinstgallium wurde entwickelt. Das Gallium wird von den Spurenelementen durch teilweise Auflösung und durch Extraktion als HGaCl₄ aus 7N HCl mit Diisopropyläther getrennt. Die wäßrige Phase mit den Verunreinigungen wird nach Zusatz von 1 ml 0,1 N H₂SO₄ fast bis zur Trockne abgedampft, mit 0,1N HCl auf 1 ml ergänzt und dann mittels Atomabsorptions-Spektrometrie unter Verwendung elektrothermischer Atomisierung analysiert. Die Nachweisgrenzen liegen zwischen 0,5 und 10 ng/g, der Variationskoeffizient zwischen 1 und 5% bei 50 ng/g. Die prozentuale Ausbeute für alle Verunreinigungen beträgt 95–100%.

---

---

On leave from Nuclear Fuel Complex, Department of Atomic Energy, Hyderabad, India.     

4-Methylumbelliferyl 5-Acetamido-3,4,5-trideoxy-α-D-manno-2-nonulopyranosidonic Acid: Synthesis and Resistance to Bacterial Sialidases

The synthesis of 4-methylumbelliferyl α-D -glycoside 13 of N-acetyl-4-deoxyneuraminic acid and its behaviour towards bacterial sialidases is described. N-Acetyl-4-deoxyneuraminic acid ( 1 ) was transformed into its methyl ester 2 and then acetylated to give the anomeric pentaacetates 3 and 4 of methyl 4-deoxyneuraminate and the enolacetate 5 (Scheme). A mixture 3/4 was treated with HCl/AcCl to give the glycosyl chloride, which was directly converted into the 4-methylumbelliferyl α-D -glycoside 9 of methyl 7-O,8-O,9-O,N-tetraacetylneuraminate and into the 2,3-dehydrosialic acid 11 . The ketoside 9 was de-O-acetylated to 12 with NaOMe in MeOH. Saponification (NaOH) of the methyl ester 12 followed by acidification gave the free 13 , which was also converted into the sodium salt 14 by passage through Dowex 50 (Na⁺). The 4-deoxy α-D -glycoside 13 is not hydrolyzed at significant rates by Vibrio cholerae and Arthrobacter ureafaciens sialidase. Neither the free N-acetyl-4-deoxyneuraminic acid ( 1 ), nor the α-D -glycoside 13 inhibit the activity of these sialidases.     

Trennung von spaltprodukten durch Extraktionschromatographie

The separation of fission products which form anionic species in mineral acids and of uranium and neptunium from samples of neutron-irradiated uranium is described. The method used is extraction chromatography with tri-n-butylphosphate (TBP) and di-(2-ethylhexyl)-orthophosphoric acid (HDEHP) as extractants and polytrifluoromonochloroethylene powder as the solid support. In the first column Zr, U and Np are extracted with TBP from 8N HNO₃/NaClO₃. In the second column, HDEHP is applied as extractant and 9N HCl/NaClO₃ as the mobile phase for the isolation of Nb, Sb, and I, and in the third column (HDEHP), the rare earths and Mo are extracted from 0.1N HCl. Finally with the fourth column (TBP), Te and Tc are isolated from 6N HCl. These four groups of elements are further separated by elution from the columns. From the final effluent containing Ru, Rh, Cs, Sr, and Ba, Ru is distilled from HClO₄, and Rh is precipitated with NH₄OH. The determination of chemical yields with X-ray fluorescence techniques is described for Zr, Mo, Te, Cs, Ce and U.

---

---

Aus einer Dissertation, Mainz 1967.