The First Conjugated Allene Polymer

A novel conjugated polymer with allene moieties in the polymer main chain, poly(4,4′‐biphenylylene‐1,3‐diphenylpropadien‐1,3‐ylene), was synthesized from 1,3‐bis(4‐bromophenyl)‐1,3‐diphenylpropadiene by dehalogenative polycondensation using Ni(cod)₂. The polymer shows good solubility in common organic solvents, good processability for making thin films, intense blue fluorescence in solution and acid sensitivity resulting in coloration. The conductivity increased by an order of 10⁴ upon exposure to trifluoroacetic acid vapor.     

Synthesis and characterization of poly(1-benzoylsemicarbazide) and poly(1,3,4-oxadiazole amine) from 2-(p-aminophenyl)-1,3,4-oxadizolin-5-one via ring-opening

A novel thermally stable and semiconducting polyheterocycle, poly(1,3,4-oxadiazole amine), was synthesized from 2-(p-aminophenyl)-1,3,4-oxadiazolin-5-one via ring-opening. The polymer is a new class of ordered alternating copoly(aniline) containing 1,3,4-oxadiazole heterocyclic units. The polymer is highly thermally stable and exhibits no weight loss up to 370°C in air. Its electric conductivity is less than 10⁻¹⁰ S · cm⁻¹ at ambient temperature, but markedly increases to 6,5 · 10⁻⁷ S · cm⁻¹ upon doping with iodine.     

Synthesis of polymers containing azo groups in the main chain from <Emphasis Type="Italic">m</Emphasis>-phenylenediamine: Study of doping

Synthesic approach to polymers containing azo groups was developed on the basis of diazotization and azo-coupling reaction of m-phenylenediamine (m-PDA) with various ratio m-phenylenediamine-sodium nitrite. Doping of poly(azoaminophenylenes) with iodine, perchloric and hydrochloric acids was examined. Electroconductivity increases in the case of iodine to 0.2 S mol⁻¹, of perchloric acid, to 7×10⁻³ S mol⁻¹, and at the action of hydrogen chloride it is virtually unaffected. According to the ESR spectra, at the doping with iodine and perchloric acid electroconductivity enhances generally due to the mobility increase of the charge carriers (polarons).     

A dependence of electrical conductivity and some properties of paramagnetic centers on the doping level of poly(4-aminoazobenzene) with iodine

The dependences of the electrical conductivity, ESR spectral linewidths, spin concentrations, and g-factor on the level of iodine doping of poly(4-aminoazobenzene), synthesized by the oxidative polymerization of 4-aminoazobenzene with iodine, were studied for the first time. The polymers were studied by ESR and UV spectroscopy. With an increase in the level of iodine doping, the electrical conductivity of the polymers increases from 3·10⁻¹⁰ to 4·10⁻¹ S m⁻¹, the ESR linewidth increases from 0.96 to 1.94 mT, and the g-factor increases from 2.004 to 2.007. The spin concentration changes ambiguously, depending on the doping level. In the iodine-doped polymers, spins are mainly localized on two nitrogen atoms of the azo groups.     

Synthesis and characterization of fluorine‐containing polybenzimidazole for proton conducting membranes in fuel cells

Two new kinds of fluorine‐containing polybenzimidazoles (PBI), poly(2,2′‐(tetrafluoro‐p‐phenylene)‐5,5′‐bibenzimidazole) and poly(2,2′‐tetradecafluoroheptylene‐5,5′‐bibenzimidazole), were synthesized by condensation polymerization of 3,3′‐diaminobenzidine and perfluoroterephthalic acid (or perfluoroazelaic acid), with polyphosphoric acid as solvent. Thermogravimetric analysis results show that the fluorine‐containing polymers synthesized exhibit promising thermal stability. The film‐forming properties of the fluorine‐containing polymers are improved over nonfluorinated PBI. The introduction of fluorine into the backbone of the polymers has significant positive affection on their chemical oxidation stability demonstrated by Fenton test. Compared with poly(2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole)/phosphoric acid (PA) composite membrane, the resulting fluorinated membranes with a same PA doping level exhibit better flexibility and higher proton conductivity. The maximum proton conductivity gained is 3.05 × 10^?2 S/cm at 150 °C with a PA doping level of 7. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2115–2122, 2010     

Synthesis of poly(o‐phenylenediamine) nanofiber with novel structure and properties

The poly(o‐phenylenediamine) (PoPD) was synthesized from the monomer o‐phenylenediamine in various organic solvent medium viz. dimethyl sulfoxide (DMSO), N,N‐dimethyl formamide (DMF) and methanol using ammonium per sulfate as a radical initiator. The structure just like polyaniline derivative with free ?NH functional groups of the synthesized polymers confirmed by various standard characterizations was explained from the proposed polymerization mechanism. All the synthesized polymers were completely soluble in common organic solvent like DMSO and DMF because of the presence of polar free ?NH functional groups in its structure. The formation of polymer nanofiber by reverse salting‐out process was confirmed, and the synthesized polymer in DMSO medium was the best polymer in terms of nano‐morphology as well as conducting properties. Interestingly, the average DC conductivity of undoped polymer film was recorded as 2.21 × 10^?6 Scm^?1 because of induced doping through self charge separation. Moreover, the conductivity of the polymer film was further increased to 1.16 × 10^?3 Scm^?1 after doping by sulfuric acid. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and properties of poly(aryl ether benzimidazole) copolymers for high-temperature fuel cell membranes

A series of poly(aryl ether benzimidazole) copolymers bearing different aryl ether linkage contents were synthesized by condensation polymerization in polyphosphoric acid (PPA) by varying the feed ratio of 4,4′-dicarboxydiphenyl ether (DCPE) to terephthalic acid (TA). As the ether unit content in the copolymer increased, the solubility of the copolymer in PPA and N,N′-dimethylacetamide/LiCl improved. For example 3–7 wt.% DMAc solution containing 2 wt.% of LiCl could be prepared from the copolymers. XRD studies revealed that the incorporation of flexible aryl ether linkages increased the chain d-spacings of the polymer backbones and decreased the crystallinity of the copolymers. Still, these copolymers having ether linkages showed reasonably good thermal/mechanical stability and high proton conductivity. For example, the copolymer with 30 mol% ether linkage had a tensile strength of 43 MPa (at 26 °C and 40% relative humidity) at an acid doping level of 7.5 mol H₃PO₄ and a proton conductivity of 0.098 S cm⁻¹ (at 180 °C and 0% relative humidity) at an acid doping level of 6.6 mol H₃PO₄.     

Comparative studies of chemically synthesized polyaniline and poly(o-toluidine) doped with p-toluene sulphonic acid

Polyaniline and poly(o-toluidine) doped with p-toluene sulphonic acid (p-TSA) were synthesized by in situ chemical polymerization method using ammonium per sulphate as an oxidizing agent. This is a novel polymerization process for the direct synthesis of emeraldine salt phase of the polymer. The polymers were characterized by using UV-Vis and FT-IR spectroscopy, SEM, elemental analyzer, TGA/DSC and conductivity measurements. Thermal analysis shows that poly(o-toluidine) is less thermally stable compared to polyaniline. The less conductivity in poly(o-toluidine) is due to the cumulative steric as well as electronic effect of the bulky methyl substituent present on the benzene ring. High temperature conductivity measurements show ‘thermal activated behavior’.     

PANI/La2O3复合纳米材料的合成及其电化学降解的抑制作用

作为离子型表面活性剂, 对-甲基苯磺酸可用于氧化镧的预超声分散处理, 同时还可作为质子酸对聚苯胺(PANI)进行掺杂, 从而赋予聚苯胺导电性. 采用化学法合成了聚苯胺/氧化镧复合纳米材料, 用四探针法测定了材料的电导率, 用扫描电镜、电子能谱、X射线衍射、红外光谱等检测分析手段对材料进行了表征. 结果表明, 聚苯胺及聚苯胺/氧化镧复合纳米材料的电导率分别为1.0•和1.9 S•cm^－1, 粒子直径分别约为200和50 nm. 氧化镧的掺杂未降低聚苯胺的电导率, 并使粒径减小. 循环伏安实验结果说明, 氧化镧的掺杂可提高氧化还原峰的电流密度, 并能有效抑制聚苯胺在0.25～2.0 mol•L^－1的H₂SO₄及H₃PO₄水溶液中的电化学降解.     

Preparation and characterization of novel organosoluble and thermally stable poly(benzimidazole-amide)s bearing phthalimide pendent groups

Novel aromatic poly(benzimidazole-amide)s, PBAs, have been synthesized by direct polycondensation of a new dicarboxylic acid, N-[3,5-bis(5-carboxylic acid-2-benzimidazole) phenyl]phthalimide (1), containing performed benzimidazole rings and a phthalimide pendent group with various aromatic diamines. The dicarboxylic acid was synthesized by reaction of 5-(N-phthalimide)isophthalic acid with 4-methyl-1,2-phenylenediamine in polyphosphoric acid, followed by its oxidation into relative dicarboxylic acid. To study the structure-property relationships of 1,3-bis(5-carboxylic acid-2-benzimidazole)benzene (2, as a reference) this compound was also synthesized. The chemical structure of 1 and 2 were confirmed by the spectroscopic methods and elemental analyses. The characterization of the polymers was performed with inherent viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H NMR spectroscopy and thermogravimetry. The polymers were obtained in quantitative yields with inherent viscosities between 0.53 and 0.91 dl g⁻¹. The effects of the phthalimide pendent group on the polymer properties such as solubility and thermal behavior were investigated and compared with those of the corresponding unsubstituted poly(benzimidazole-amide)s. The modified poly(benzimidazole-amide)s showed enhanced solubilities in some solvents, such as m-cresol and pyridine, in comparison to the unmodified analogues. In addition, the incorporation of the pendent phthalimide groups in the poly(benzimidazole-amide)s backbone increased remarkably the thermal stability of the polymer. The glass transition temperature and 10% weight loss temperature of the poly(benzimidazole-amide)s were in range of 291-334 °C and 466-540 °C, respectively, in nitrogen.     

Synthesis and investigation of poly(p-phenylenediamine)–poly(1,4-benzoquinonediimine-<Emphasis Type="Italic">N,N</Emphasis>-diyl-1,4-phenylene)

Poly(1,4-benzoquinonediimine-N,N-diyl-1,4-phenylene) having similar structure to pernigraniline was synthesized by chemical oxidative polymerization of p-phenylenediamine and its salt using potassium peroxydisulfate as an oxidant in molar ratio 1:0.8, in acetic acid, at 278 K. Acetylation of amino end groups of polymers were carried out aiming to prevent self-condensation of amino groups with 1,4-benzoquinone diimine groups by 1,4-addition. Attempting to carry out the reduction of obtained polymer with hydrazine hydrate, it was shown that 1,4-addition of hydrazine to quinonediimine groups occurs instead of expected reduction reaction. When doping obtained polymers with iodine, the electrical conductivity increases up to 10^?4 S/cm.     

Heterotelechelic poly(oxazolidine-acetals) and their functionalization

Telechelic poly(1,3-oxazolidine-acetal)s with -CH₂OH and -CHO groups were synthesized by polycondensation of the 2-amino-2-hydroxy-1,3-propanediol ( 1 ) (TRIS) with terephthaldehyde ( 2 ). The degree of polymerization (DP) was controlled by the ratio of 1 to 2 at the given reaction time. Characterization was achieved by ¹H and ¹³C NMR and IR spectroscopy. The distribution of oxazolidine-acetal units in the polymer chain has been performed using ESI-MS. The activities of telechelic poly(oxazolidine-acetal) were determined in reaction oxidation (4-chloroperbenzoic acid), reduction (CH₃MgCl) and nucleophilic substitution (acylation, alkylation).     

Electrical conductivity,photoconductivity, and optical properties of poly(1,4‐diaminoanthraquinone) organic semiconductor for optoelectronic applications

The electrical conductivity and optical properties of the poly(1,4‐diaminoanthraquinone) [poly(1,4‐DAAQ)] have been investigated. The electrical conductivity of the polymer increases with temperature and room temperature conductivity was found to be 2.68 10^?5 S cm^?1. The optical band gap of the polymer is 1.87 eV due to the direct optical transitions. The photoconductivity of the polymer is higher than that of dark conductivity. When the light is switched on, the resistance decreases abruptly and when it is switched off, the resistance increases. This confirms that the polymer is a photoconductive material. The obtained results indicate that the poly(1,4‐DAAQ) is a photoconducting organic semiconductor with photovoltaic and dark current properties. Copyright © 2008 John Wiley & Sons, Ltd.     

Vibration and X-ray photoelectron spectroscopies of FeCl3-doped poly(p-diethynylbenzene)

The doping mechanism of poly(p-diethynylbenzene), chemically doped with FeCl₃, was investigated. Absorption, infrared, far infrared, Raman, X-ray photoelectron spectroscopies were used to determine the nature of the dopant in doped polymer. The experimental results suggest that the charge transfer reaction between the polymer chain and the dopant results in the formation of FeCl₄⁻ species, the π electron charge delocalization along the polymeric chain and the reduction of π-π^* transition energy.     

Synthesis and ionic conductivity of mixed substituted polysiloxanes with oligoethyleneoxy and cyclic carbonate substituents

New comb polysiloxanes with mixed substituents were synthesized by hydrosilylation of PMHS with 4-allyloxymethyl-[1,3]dioxolan-2-one and tri(ethylene glycol) allyl methyl ether (AMPEO₃). The effect of the incorporation of carbonate groups on ionic transport, viscosity and thermal properties has been investigated. When doped with lithium bis(trifluorosulfonyl) imide, LiTFSI, the mixed substituted polysiloxane polymers with varying carbonate content all exhibited conductivity higher than those for the polysiloxanes with pure carbonate or pure oligoethyleneoxy substituents. The maximum ambient conductivity in this series was 1.62× 10⁻⁴ S/cm, occurring for the polymer containing 8.5% polar carbonate groups at a doping level of EO/LiTFSI = 15. The impedance measurement results showed that polymers containing larger amounts of carbonate groups exhibited lower conductivity, probably because of their increased viscosity and higher glass transition temperature. The conduction mechanism for these new comb polymers obeys free volume theory, as indicated by conductivity data fit to the VTF equation. We dedicate this paper to Professor Dick Jones, polysilane pioneer and valued friend.     

Preparation and characterization of electrically conducting Langmuir-Blodgett films of poly(N-octadecylaniline)

A stable monolayer of N-octadecylaniline containing stearic acid at the air-water interface has been obtained. However, the Langmuir monolayer of pure poly(N-octadecylaniline) was not stable, but mixed Langmuir-Blodgett films of this polymer with stearic acid in different ratios as a spreading aid were stable. The electrical conductivity of these films increased by five orders of magnitude after doping with iodine as compared to that before iodine doping (5.8x10(-7) S cm(-1)). Temperature-dependent electrical conductivity suggested that these films were semiconducting in nature with low thermal activation energy. Impedance analyses of these films revealed that the equivalent circuit for poly(N-octadecylaniline) was (RQ) whereas that for mixed poly(N-octadecylaniline) with stearic acid was (RQ)(RQ).     

New aromatic benzazole polymers II: Synthesis and conductivity of benzobisthiazole-co-polymers incorporated with 4-N,N-dimethylaminotriphenylamine groups

New aromatic benzobisthiazole copolymers containing 10–70 mol % of 4-N,N-dimethylamino-triphenylamine functionality were prepared from the respective dinitrile or dicarboxylic acid monomers, terephthalic acid, and 2,5-diamino-1,4-benzene-dithiol dihydrochloride in polyphosphoric acid. At the first approximation, the copolymers containing 10 mol % or less of the triarylamino moieties in the polymer chains still preserve the capability to form anisotropic (nematic) solutions at 10 wt % polymer concentration. This is an important requirement for processing the copolymers into fibers and films with good to excellent mechanical properties. Films with good mechanical integrity were cast from the dilute methanesulfonic acid solutions of the copolymers under reduced pressure. They showed electrical conductivity values of the order of 10⁻¹¹–10⁻¹⁰ S/cm in pristine state, with four to seven orders of magnitude increase upon exposure to mild oxidizing agents such as iodine vapor. On the contrary, the parent polymer, poly(p-phenylene benzobisthiazole) is an insulator with conductivity of less than 10⁻¹² S/cm, and its conductivity does not improve at all with exposure to iodine vapor. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 713–724, 1998     

Photoinitiated thermolysis of poly(phenylenevinylene) precursor and photochemical doping of poly(phenylenevinylene)

The photoinitiated elimination of methoxy groups of poly(p-phenylene-1-methoxyethylene) and the photochemical doping of the resulting poly(phenylenevinylene) (PPV) were investigated. Upon irradiation and then heat treatment at 150°C, poly(p-phenylene-1-methoxyethylene) containing triphenylsulfonium hexafluoroantimonate was converted to PPV. The resulting PPV was observed to be conductive, and its conductivity was 10⁻²–10⁻³ S/cm. By a lithographic procedure, we produced a conducting pattern doped photochemically in a nonconjugated poly(p-phenylene-1-methoxyethylene) matrix.     

DC Electrical Conductivity of Some Oligoazomethines Doped with Nanotubes

Three aromatic oligoazomethines containing seven benzene rings each were synthesized. The terminal rings were substituted with different organic groups; namely, OH, H, and NO₂. Synthesis was carried out according to the literature by condensing the para-substituted benzaldehydes with benzidine to give the three rings compound, which is then condensed with terephthaldehyde to give the respective seven benzene rings oligomer. The oligomers were used to investigate the effects of molecular structure on the electronic structure, as well as electronic and electrical properties. DC electrical conductivity variation of oligoazomethines is studied in the temperature range 300–500 K after annealing for 24 h at 100°C and after doping with 25 and 50 wt% Multi Wall Nanotubes (MWNTs). An attempt is made to relate DC electrical conductivity and electronic properties to chain length, substituted groups and coplanarity. The different groups attached to the ends showed a small effect on conductivity of the different oligomers in the following order: electron donating > neutral > electron withdrawing groups. Oligoazomethines-MWNTs gave a value of (10^?4 Scm^?1) as the highest electrical conductivity at higher temperatures. DC electrical conductivity was interpreted using the band energy model. The narrow-gap activation energies noted suggest its application in formulation of photovoltaic panels.     

Anhydrous proton conducting membranes based on crosslinked graft copolymer electrolytes

A comb-like copolymer consisting of a poly(vinylidene fluoride-co-chlorotrifluoroethylene) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. P(VDF-co-CTFE)-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and a microphase-separated structure of the copolymer were confirmed by proton nuclear magnetic resonance (¹H NMR), FT-IR spectroscopy, and transmission electron microscopy (TEM). This comb-like polymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the –OH groups of PHEA and the –COOH groups of IDA. Upon doping with phosphoric acid (H₃PO₄) to form imidazole–H₃PO₄ complexes, the proton conductivity of the membranes continuously increased with increasing H₃PO₄ content. A maximum proton conductivity of 0.015 S/cm was achieved at 120 °C under anhydrous conditions. In addition, these P(VDF-co-CTFE)-g-PHEA/IDA/H₃PO₄ membranes exhibited good mechanical properties (765 MPa of Young's modulus), and high thermal stability up to 250 °C, as determined by a universal testing machine (UTM) and thermal gravimetric analysis (TGA), respectively.