High-valent nonheme iron. Two distinct iron(IV) species derived from a common iron(II) precursor

The reaction of [Fe(II)(beta-BPMCN)(OTf)2] (1, BPMCN = N,N'-bis(2-pyridylmethyl)-N,N'-dimethyl-trans-1,2-diaminocyclohexane) with tBuOOH at low-temperature yields alkylperoxoiron(III) intermediates 2 in CH2Cl2 and 2-NCMe in CH3CN. At -45 degrees C and above, 2-NCMe converts to a pale green species 3 (lambda(max) = 753 nm, epsilon = 280 M(-1) cm(-1)) in 90% yield, identified as [Fe(IV)(O)(BPMCN)(NCCH3)]2+ by comparison to other nonheme [Fe(IV)(O)(L)]2+ complexes. Below -55 degrees C in CH2Cl2, 2 decays instead to form deep turquoise 4 (lambda(max) = 656, 845 nm; epsilon = 4000, 3600 M(-1) cm(-1)), formulated to be an unprecedented alkylperoxoiron(IV) complex [Fe(IV)(BPMCN)(OH)(OOtBu)]2+ on the basis of M?ssbauer, EXAFS, resonance Raman, NMR, and mass spectral evidence. The reactivity of 1 with tBuOOH in the two solvents reveals an unexpectedly rich iron(IV) chemistry that can be supported by the BPMCN ligand.     

Regioselectivity of aliphatic versus aromatic hydroxylation by a nonheme iron(II)-superoxo complex

Many enzymes in nature utilize molecular oxygen on an iron center for the catalysis of substrate hydroxylation. In recent years, great progress has been made in understanding the function and properties of iron(IV)-oxo complexes; however, little is known about the reactivity of iron(II)-superoxo intermediates in substrate activation. It has been proposed recently that iron(II)-superoxo intermediates take part as hydrogen abstraction species in the catalytic cycles of nonheme iron enzymes. To gain insight into oxygen atom transfer reactions by the nonheme iron(II)-superoxo species, we performed a density functional theory study on the aliphatic and aromatic hydroxylation reactions using a biomimetic model complex. The calculations show that nonheme iron(II)-superoxo complexes can be considered as effective oxidants in hydrogen atom abstraction reactions, for which we find a low barrier of 14.7 kcal mol(-1) on the sextet spin state surface. On the other hand, electrophilic reactions, such as aromatic hydroxylation, encounter much higher (>20 kcal mol(-1)) barrier heights and therefore are unlikely to proceed. A thermodynamic analysis puts our barrier heights into a larger context of previous studies using nonheme iron(IV)-oxo oxidants and predicts the activity of enzymatic iron(II)-superoxo intermediates.     

Dioxygen activation and catalytic aerobic oxidation by a mononuclear nonheme iron(II) complex

We have used dioxygen, not artificial oxidants such as peracids, iodosylarenes, and hydroperoxides, in the generation of a mononuclear nonheme oxoiron(IV) complex, [Fe(IV)(TMC)(O)]2+ (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), from its corresponding Fe(II) complex, [Fe(TMC)(CF3SO3)2]. The formation of oxoiron(IV) species by activating dioxygen was markedly dependent on iron(II) complexes and solvents, and this observation was interpreted with the electronic effect of iron(II) complexes on dioxygen activation to form oxoiron(IV) species. A catalytic aerobic oxidation of organic substrates was demonstrated in the presence of the [Fe(TMC)]2+ complex. By carrying out 18O-labeled water experiment, we were able to conclude that the oxidation of organic substrates was mediated by an oxoiron(IV) intermediate, not by a radical type of autoxidation process.     

Oxygen activation by nonheme iron(II) complexes: alpha-keto carboxylate versus carboxylate

Mononuclear iron(II) alpha-keto carboxylate and carboxylate compounds of the sterically hindered tridentate face-capping ligand Tp(Ph2) (Tp(Ph2) = hydrotris(3,5-diphenylpyrazol-1-yl)borate) were prepared as models for the active sites of nonheme iron oxygenases. The structures of an aliphatic alpha-keto carboxylate complex, [Fe(II)(Tp(Ph2))(O(2)CC(O)CH(3))], and the carboxylate complexes [Fe(II)(Tp(Ph2))(OBz)] and [Fe(II)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] were determined by single-crystal X-ray diffraction, all of which have five-coordinate iron centers. Both the alpha-keto carboxylate and the carboxylate compounds react with dioxygen resulting in the hydroxylation of a single ortho phenyl position of the Tp(Ph2) ligand. The oxygenation products were characterized spectroscopically, and the structure of the octahedral iron(III) phenolate product [Fe(III)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] was established by X-ray diffraction. The reaction of the alpha-keto carboxylate model compounds with oxygen to produce the phenolate product occurs with concomitant oxidative decarboxylation of the alpha-keto acid. Isotope labeling studies show that (18)O(2) ends up in the Tp(Ph2) phenolate oxygen and the carboxylate derived from the alpha-keto acid. The isotope incorporation mirrors the dioxygenase nature of the enzymatic systems. Parallel studies on the carboxylate complexes demonstrate that the oxygen in the hydroxylated ligand is also derived from molecular oxygen. The oxygenation of the benzoylformate complex is demonstrated to be first order in metal complex and dioxygen, with activation parameters DeltaH++ = 25 +/- 2 kJ mol(-1) and DeltaS++ = -179 +/- 6 J mol(-1) K(-1). The rate of appearance of the iron(III) phenolate product is sensitive to the nature of the substituent on the benzoylformate ligand, exhibiting a Hammett rho value of +1.3 indicative of a nucleophilic mechanism. The proposed reaction mechanism involves dioxygen binding to produce an iron(III) superoxide species, nucleophilic attack of the superoxide at the alpha-keto functionality, and oxidative decarboxylation of the adduct to afford the oxidizing species that attacks the Tp(Ph2) phenyl ring. Interestingly, the alpha-keto carboxylate complexes react 2 orders of magnitude faster than the carboxylate complexes, thus emphasizing the key role that the alpha-keto functionality plays in oxygen activation by alpha-keto acid-dependent iron enzymes.     

Ortho-hydroxylation of benzoic acids with hydrogen peroxide at a non-heme iron center

The iron-assisted hydroxylation of benzoic acid to salicylic acid by 1/H2O2 has been achieved in good yield under mild conditions (where is [Fe(II)(BPMEN)(CH3CN)2](ClO4)2 and BPMEN =N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine); the product of this reaction is a novel mononuclear iron(III) complex with a chelating salicylate.     

Biomimetic aryl hydroxylation derived from alkyl hydroperoxide at a nonheme iron center. Evidence for an Fe(IV)=O oxidant

Many nonheme iron-dependent enzymes activate dioxygen to catalyze hydroxylations of arene substrates. Key features of this chemistry have been developed from complexes of a family of tetradentate tripodal ligands obtained by modification of tris(2-pyridylmethyl)amine (TPA) with single alpha-arene substituents. These included the following: -C(6)H(5) (i.e., 6-PhTPA), L(1); -o-C(6)H(4)D, o-d(1)-L(1); -C(6)D(5), d(5)-L(1); -m-C(6)H(4)NO(2), L(2); -m-C(6)H(4)CF(3), L(3); -m-C(6)H(4)Cl, L(4); -m-C(6)H(4)CH(3), L(5); -m-C(6)H(4)OCH(3), L(6); -p-C(6)H(4)OCH(3), L(7). Additionally, the corresponding ligand with one alpha-phenyl and two alpha-methyl substituents (6,6-Me(2)-6-PhTPA, L(8)) was also synthesized. Complexes of the formulas [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(n)())Fe(II)(OTf)(2)] (n = 1-7, OTf = (-)O(3)SCF(3)), and [(L(8))Fe(II)(OTf)(2)](2) were obtained and characterized by (1)H NMR and UV-visible spectroscopies and by X-ray diffraction in the cases of [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(6))Fe(II)(OTf)(2)], and [(L(8))Fe(II)(OTf)(2)](2). The complexes react with tert-butyl hydroperoxide ((t)()BuOOH) in CH(3)CN solutions to give iron(III) complexes of ortho-hydroxylated ligands. The product complex derived from L(1) was identified as the solvated monomeric complex [(L(1)O(-))Fe(III)](2+) in equilibrium with its oxo-bridged dimer [(L(1)O(-))(2)Fe(III)(2)(mu(2)-O)](2+), which was characterized by X-ray crystallography as the BPh(4)(-) salt. The L(8) product was also an oxo-bridged dimer, [(L(8)O(-))(2)Fe(III)(2)(mu(2)-O)](2+). Transient intermediates were observed at low temperature by UV-visible spectroscopy, and these were characterized as iron(III) alkylperoxo complexes by resonance Raman and EPR spectroscopies for L(1) and L(8). [(L(1))Fe(II)(OTf)(2)] gave rise to a mixture of high-spin (S = 5/2) and low-spin (S = 1/2) Fe(III)-OOR isomers in acetonitrile, whereas both [(L(1))Fe(OTf)(2)] in CH(2)Cl(2) and [(L(8))Fe(OTf)(2)](2) in acetonitrile afforded only high-spin intermediates. The L(1) and L(8) intermediates both decomposed to form respective phenolate complexes, but their reaction times differed by 3 orders of magnitude. In the case of L(1), (18)O isotope labeling indicated that the phenolate oxygen is derived from the terminal peroxide oxygen via a species that can undergo partial exchange with exogenous water. The iron(III) alkylperoxo intermediate is proposed to undergo homolytic O-O bond cleavage to yield an oxoiron(IV) species as an unobserved reactive intermediate in the hydroxylation of the pendant alpha-aryl substituents. The putative homolytic chemistry was confirmed by using 2-methyl-1-phenyl-2-propyl hydroperoxide (MPPH) as a probe, and the products obtained in the presence and in the absence of air were consistent with formation of alkoxy radical (RO(*)). Moreover, when one ortho position was labeled with deuterium, no selectivity was observed between hydroxylation of the deuterated and normal isotopomeric ortho sites, but a significant 1,2-deuterium shift ("NIH shift") occurred. These results provide strong mechanistic evidence for a metal-centered electrophilic oxidant, presumably an oxoiron(IV) complex, in these arene hydroxylations and support participation of such a species in the mechanisms of the nonheme iron- and pterin-dependent aryl amino acid hydroxylases.     

Iron(II) complexes of sterically bulky alpha-ketocarboxylates. structural models for alpha-ketoacid-dependent nonheme iron halogenases

Reaction of the sterically hindered alpha-ketocarboxylate 2,6-di(mesityl)benzoylformate (MesBF) with the iron(II) complexes LFeCl 2 [L = N, N, N', N'-tetramethylpropylenediamine (Me 4pda) or 6,6'-dimethyl-2,2'-bipyridine (dmby)] yielded LFe(Cl)(MesBF) ( 1 or 2). X-ray crystal structures of these complexes showed that they closely model the active site structure of the nonheme iron halogenase enzyme SyrB2. A similar synthetic procedure using benzoylformate with L = dmby yielded (dmby)Fe[(O 2CC(O)Ph)] 2 ( 3) instead, demonstrating the need for the sterically hindered alpha-ketocarboxylate to assemble the halogenase model compounds. In order to make reactivity comparisons among the structurally related iron(II) complexes of benzoylformates of varying steric properties, the complexes [LFe(O 2CC(O)Ar)] n ( 4- 6) were prepared, where L' = tris(pyridylmethyl)amine (tpa) and Ar = 2,6-dimesitylphenyl, 2,6-di p-tolylphenyl, or 2,4,6-trimethylphenyl, respectively. X-ray structures for the latter two cases ( 5 and 6) revealed dinuclear topologies ( n = 2), but UV-vis and (1)H NMR spectroscopy indicated that all three complexes dissociated in varying degrees to monomers in CH 2Cl 2 solution. Although compounds 1- 6 were oxidized by O 2, oxidative decarboxylation of the alpha-ketocarboxylate ligand(s) only occurred for 3. These results indicate that the steric hindrance useful for structural modeling of the halogenase active site prohibits functional mimicry of the enzyme.     

DNA three-way junction with a dinuclear iron(II) supramolecular helicate at the center: a NMR structural study

A tetracationic supramolecular helicate, [Fe2L3]4+ (L = C25H20N4), with a triple-helical architecture is found to induce the formation of a three-way junction (3WJ) of deoxyribonucleotides with the helicate located in the center of the junction. NMR spectroscopic studies of the interaction between the M enantiomer of the helicate and two different oligonucleotides, [5'-d(TATGGTACCATA)]2 and [5'-d(CGTACG)]2, show that, in each case, the 2-fold symmetry of the helicate is lifted, while the 3-fold symmetry around the helicate axis is retained. The 1:3 helicate/DNA stoichiometry estimated from 1D NMR spectra supports a molecular model of a three-way junction composed of three strands. Three separate double-helical arms of the three-way junction are chemically identical giving rise to one set of proton resonances. The NOE contacts between the helicate and DNA unambiguously show that the helicate is fitted into the center of the three-way junction experiencing a hydrophobic 3-fold symmetric environment. Close stacking interactions between the ligand phenyl groups and the nucleotide bases are demonstrated through unusually large downfield shifts (1-2 ppm) of the phenyl protons. The unprecedented 3WJ arrangement observed in solution has also been found to exist in the crystal structure of the helicate adduct of [d(CGTACG)2] (Angew. Chem., Int. Ed. 2006, 45, 1227).     

Kinetic analysis of the conversion of nonheme (alkylperoxo)iron(III) species to iron(IV) complexes

Low-spin mononuclear (alkylperoxo)iron(III) complexes decompose by peroxide O-O bond homolysis to form iron(IV) species. We examined the kinetics of previously reported homolysis reactions for (alkylperoxo)iron(III) intermediates supported by TPA (tris(2-pyridylmethyl)amine) in CH3CN solution and promoted by pyridine N-oxide, and by BPMCN (N,N-bis(2-pyridylmethyl)-N,N-dimethyl-trans-1,2-diaminocyclohexane) in its cis-beta configuration in CH3CN and CH2Cl2, as well as for the previously unreported chemistry of TPA and 5-Me3TPA intermediates in acetone. Each of these reactions forms an oxoiron(IV) complex, except for the beta-BPMCN reaction in CH2Cl2 that yields a novel (hydroxo)(alkylperoxo)iron(IV) product. Temperature-dependent rate measurements suggest a common reaction trajectory for each of these reactions and verify previous theoretical estimates of a ca. 60 kJ/mol enthalpic barrier to homolysis. However, both the tetradentate supporting ligand and exogenous ligands in the sixth octahedral coordination site significantly perturb the homolyses, such that observed rates can vary over 2 orders of magnitude at a given temperature. This is manifested as a compensation effect in which increasing activation enthalpy is offset by increasingly favorable activation entropy. Moreover, the applied kinetic model is consistent with geometric isomerism in the low-spin (alkylperoxo)iron(III) intermediates, wherein the alkylperoxo ligand is coordinated in either of the inequivalent cis sites afforded by the nonheme ligands.     

X-ray absorption spectroscopic studies of high-spin nonheme (alkylperoxo)iron(III) intermediates

The reactions of iron(II) complexes [Fe(T(pt-Bu,i-Pr))(OH)] (1a, Tp(t-Bu,i-Pr) = hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate), [Fe(6-Me2BPMCN)(OTf)2] (1b, 6-Me2BPMCN = N,N'-bis((2-methylpyridin-6-yl)methyl)-N,N'-dimethyl-trans-1,2-diaminocyclohexane), and [Fe(L8Py2)(OTf)](OTf) (1c, L8Py2 = 1,5-bis(pyridin-2-ylmethyl)-1,5-diazacyclooctane) with tert-BuOOH give rise to high-spin FeIII-OOR complexes. X-ray absorption spectra (XAS) of these high-spin species show characteristic features, distinct from those of low-spin Fe-OOR complexes (Rohde, J.-U.; et al. J. Am. Chem. Soc. 2004, 126, 16750-16761). These include (1) an intense 1s --> 3d preedge feature, with an area around 20 units, (2) an edge energy, ranging from 7122 to 7126 eV, that is affected by the coordination environment, and (3) a 1.86-1.96 A Fe-OOR bond, compared to the 1.78 A Fe-OOR bond in low-spin complexes. These unique features likely arise from a flexible first coordination sphere in those complexes. The difference in Fe-OOR bond length may rationalize differences in reactivity between low-spin and high-spin FeIII-OOR species.     

A high-spin iron(IV)-oxo complex supported by a trigonal nonheme pyrrolide platform

We report the generation and characterization of a new high-spin iron(IV)-oxo complex supported by a trigonal nonheme pyrrolide platform. Oxygen-atom transfer to [(tpa(Mes))Fe(II)](-) (tpa(Ar) = tris(5-arylpyrrol-2-ylmethyl)amine) in acetonitrile solution affords the Fe(III)-alkoxide product [(tpa(Mes2MesO))Fe(III)](-) resulting from intramolecular C-H oxidation with no observable ferryl intermediates. In contrast, treatment of the phenyl derivative [(tpa(Ph))Fe(II)](-) with trimethylamine N-oxide in acetonitrile solution produces the iron(IV)-oxo complex [(tpa(Ph))Fe(IV)(O)](-) that has been characterized by a suite of techniques, including mass spectrometry as well as UV-vis, FTIR, M?ssbauer, XAS, and parallel-mode EPR spectroscopies. Mass spectral, FTIR, and optical absorption studies provide signatures for the iron-oxo chromophore, and M?ssbauer and XAS measurements establish the presence of an Fe(IV) center. Moreover, the Fe(IV)-oxo species gives parallel-mode EPR features indicative of a high-spin, S = 2 system. Preliminary reactivity studies show that the high-spin ferryl tpa(Ph) complex is capable of mediating intermolecular C-H oxidation as well as oxygen-atom transfer chemistry.     

Computational study of iron(II) and -(III) complexes with a simple model human H ferritin ferroxidase center

Interaction of iron ions with a six-amino acid model of the ferroxidase center of human H chain ferritin has been examined in density functional theory calculations. The model, based on experimental studies of oxidation of Fe2+ at the center, consists of Glu27, Glu62, His65, Glu107, Gln141, and Ala144. Reasonable structures are obtained in a survey of types of iron complexes inferred to occur in the ferroxidase reaction. Structures of complexes of the model center with one and two Fe2+ ions, with diiron(III) bridged by peroxide and bridged by oxide-peroxide combinations, have been optimized. Calculations on diiron(III) complexes confirm that stable peroxide-bridged complexes can form and that the Fe-Fe distance in at least one is consistent with the experimental Fe-Fe distance observed in the blue peroxodiferric complex of ferritin.     

Ligand topology effect on the reactivity of a mononuclear nonheme iron(IV)-oxo complex in oxygenation reactions

Mononuclear nonheme iron(IV)-oxo complexes with two different topologies, cis-α-[Fe(IV)(O)(BQCN)](2+) and cis-β-[Fe(IV)(O)(BQCN)](2+), were synthesized and characterized with various spectroscopic methods. The effect of ligand topology on the reactivities of nonheme iron(IV)-oxo complexes was investigated in C-H bond activation and oxygen atom-transfer reactions; cis-α-[Fe(IV)(O)(BQCN)](2+) was more reactive than cis-β-[Fe(IV)(O)(BQCN)](2+) in the oxidation reactions. The reactivity difference between the cis-α and cis-β isomers of [Fe(IV)(O)(BQCN)](2+) was rationalized with the Fe(IV/III) redox potentials of the iron(IV)-oxo complexes: the Fe(IV/III) redox potential of the cis-α isomer was 0.11 V higher than that of the cis-β isomer.     

electrochemical generation of a nonheme oxoiron(IV) complex

The complex [Fe(IV)O(N4Py)]2+ (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) has been prepared by bulk electrolysis in aqueous CH3CN and CH2Cl2, and its redox properties characterized. Bulk chronocoulometry and spectropotentiometry experiments in CH3CN show that [Fe(II)(N4Py)(NCCH3)]2+ can be oxidized quantitatively to its iron(III) derivative at an applied potential of +0.71 V vs ferrocene and then to the oxoiron(IV) complex (in the presence of added water) at potentials above +1.3 V. The E1/2 value for the Fe(IV/III) couple has been estimated to be +0.90 V from spectropotentiometric titrations in CH3CN and cyclic voltammetric measurements in CH2Cl2.     

Substituted benzeneseleninic acids as bidentate ligands. Synthesis and spectroscopic studies of manganese(II) and iron(II) complexes

The para- and meta-substituted seleninato anion, XC₆H₄SeO⁻₂, forms complexes with manganese(II) and iron(II) of the type [M(XC₆H₄SeO₂)₂(H₂O)₂], which have been shown to contain the bidentate ligand in seleninato-_O, O′ derivatives, the water molecules being coordinated to the metals. From the electronic absorption spectra and from the magnetic susceptibility data we have proposed for all the complexes a distorted octahedral D_4h symmetry. The structure of the anhydrous para- and meta-substituted benzeneseleninato complexes of manganese(II) and iron(II) have been investigated by means of electrical conductance measurements, spectral (electronic and i.r.) studies and magnetic susceptibility measurements. The anhydrous complexes are always of the seleninato-O, O′ type with the ligands tetrahedrally coordinated to the central atom. The wavelengths of the principal absorption peaks have been accounted for quantitatively in terms of the crystal field theory for manganese(II) derivatives. The nephelauxetic parameters are all indicative of an appreciable metal-ligand covalency.     

Complex formation of copper(II) and iron(II) with octadecyloxythiazolylazophenol at the heptane-water interface.

The complex formation of Cu(II) and Fe(II) with a hydrophobic ligand, 5-(octadecyloxy)-2-(2-thiazolylazo)phenol (TARC18), was investigated in the heptane/water system by the high-speed stirring spectrometry and the micro-two phase flow ESI/MS method. At first, the dissociation constant of TARC18 at the heptane/water interface was determined as pKa = 7.11. The interfacial complexation of the ligand with Cu(II) and Fe(II) under stirred conditions progressed with an increase of the pH. The experimental results showed that a 1:1 complex of Cu(II) and TARC18 was formed at the interface, but was hardly extracted into the heptane phase. On the other hand, the 1:2 complex of Fe(II) with TARC18 formed at the interface was significantly extracted into the heptane phase. The extraction constants and interfacial complex formation constants were estimated for the two systems from the experimental results, and all of the reaction schemes, including the interfacial reactions, were elucidated.