Spectrophotometric determination of vanadium(IV) in the presence of vanadium(V) using Br-PADAP

In the present paper, a simple and sensitive method is proposed for vanadium(IV) determination in the presence of vanadium(V). This is based on the oxidation of vanadium(IV) present in the sample to vanadium(V) by addition of iron(III) cation, followed by a complexation reaction of iron(II) with the spectrophotometric reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP). The iron(II) reacts with Br-PADAP immediately, forming a stable complex with a large molar absorptivity. The vanadium(IV) determination is possible, with a calibration sensitivity of 0.549 g ml^–1, for an analytical curve of 18.8 ng ml^–1 to 2.40 g ml^–1, molar absorptivity of 2.80 × 10⁴ 1 mole^–1 cm^–1 and a detection limit of 5.5 ng ml^–1. Selectivity was increased with the use of EDTA as a masking agent. The proposed method was applied for the vanadium(IV) determination in the presence of several amounts of vanadium(V). The results revealed that 200 g of vanadium(V) do not interfere with determination of 5.00 g of vanadium(IV). The precision and the accuracy obtained were satisfactory (R. S. D.<2%).     

Individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV)

Summary Methods for the individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV) are proposed, based on the formation of peroxo complexes. The detection limits are 1.0 × 10^–5 mol/l V (120 l) and 2.5 × 10^–6 mol/l Ti (80 l). A cation exchange resin mini-column is incorporated on-line into the vanadium manifold to remove the titanium complex and allow the vanadium to be determined selectively. A normal injection valve is used for the individual determinations, but it is modified for determination of V(V)/–Ti(IV) mixtures in order to introduce two samples sequentially into the reagent stream. One passes through a cation exchanger minicolumn, the other through an empty column, before reaching the detector. The former allows V alone to be measured, the latter V+Ti.

---

Individuelle und sequentielle spektralphotometrische Fließinjektionsbestimmung von Vanadium(V) und Titan(IV)

---

Dedicated to Prof. Dr. G. Tölg on the occasion of his 60th birthday     

Analytical applications of mixed-ligand complexes

Summary In medium of pH=1, vanadium(V) forms a 1 1 cationic complex with PAR, the instability constant of the complex beingpK=5.6. In the presence of hydrogen peroxide a 111 mixed-complex develops which is uncharged. The molar absorptivity of the complex ( ₅₄₀=1.28×10⁴ l·mole^–1·cm^–1) provides a possibility for the spectrophotometric determination of 1–65M hydrogen peroxide.

---

Zusammenfassung In saurer Lösung (pH=1) bildet Vanadin(V) mit PAR einen positiv geladenen Komplex, dessen Komplexkonstante dem pK-Wert 5,6 entspricht. In Anwesenheit von Wasserstoffperoxid bildet sich mit diesem Kation ein ungeladener Mischkomplex im Verhältnis 111. Dessen Extinktionskoef-fizient ( ₅₄₀=1,28×10⁴ l · mol^–1 · cm^–1) ermöglicht die spektrophotometrische Bestimmung von Wasserstoffperoxid im Konzentrationsbereich von 1–65Mol/l.

     

Photometric detection of cyclodextrins in liquid chromatography by using iodine generated electrochemically in-situ

A method has been developed for photometric detection of cyclodextrins (CD) in liquid chromatography using iodine (I₂) generated electrochemically in-situ. Iodide ion in the mobile phase was electrochemically oxidized to I₂ which was subsequently reacted with I^–, in an electrochemical flow cell, forming I₃^–. The absorbance of I₃^– was found to be greatly enhanced when CD were present in the mobile phase. The absorbance enhancement was caused by the change in the mole fraction of I₃^–, because of the inclusion reaction of I₃^– with CD. On the basis of this phenomenon, CD were detected by means of a photodiode-array UV–visible detector positioned downstream of the electrochemical flow cell. The signals were found to be linearly dependent on CD concentration. Because the formation constants of I₃^– with CD decrease in the order -CD>-CD>-CD, -CD was most detectable by the method. Detection limits were 1.0 mol L^–1 for -CD, 65 mol L^–1 for monoG1--CD, 100 mol L^–1 for -CD, and 200 mol L^–1 for -CD.     

Adsorptive Voltammetric Study of Thorium–Alizarin Complexon Complex at a Carbon Paste Electrode

A new sensitive adsorptive voltammetric procedure is described for trace measurement of thorium. It is based on the cathodic stripping peak of the thorium–alizarin complexon (ALC) complex at a carbon paste electrode (CPE). The complex of Th(IV) with alizarin is adsorbed at a CPE in a mixed buffer solution (pH 5.0) which consists of 0.1mol·L^–1 sodium acetate and 0.04mol·L^–1 potassium biphthalate, yielding a sensitive cathodic voltammetric peak corresponding to the reduction of alizarin in the complex at –0.57V (vs. SCE). The second-order derivative peak current of the complex is linearly dependent upon the concentration of Th(IV) over the range of 3.0×10^–9 8.0×10^–7mol·L^–1. The detection limit is 1.0×10^–9mol·L^–1 for 180s accumulation. The molar ratio of each component in the complex was estimated as n_Th(IV):n_ALC=1:1 by a continuous variation method. The electrode processes of the Th(IV)–alizarin complex at a CPE were investigated. The procedure was successfully applied to the trace determination of thorium in ore and clay samples.     

Photoinduced chemiluminescence in salicylaldehyde hydrazone solution

Simultaneously with the chemiluminescent reaction of salicylaldehyde hydrazone (G) oxidation by hypochlorite, the competing chemiluminescent reaction of G with the hydroxide ion occurs in alkaline media. The former reaction is accompanied by green chemiluminescence, whereas the latter, with blue chemiluminescence. The estimation of the rate constant for the bimolecular reaction G + OH^– gives the value 2×10⁵ l mol^–1 s^–1. The necessary condition for appearance of chemiluminescence upon interaction of G with OH^– is the preliminary illumination of the solution of G with light at a wavelength of 400–540 nm, which is accompanied by the formation of an acoplanar quinonoid isomer of G interacting with the hydroxide ion. The height of the energetic barrier for transition of G molecules from the illuminated to the dark state is 18 kcal mol^–1.Translated from Khimiya Vysokikh Energii, Vol. 39, No. 2, 2005, pp. 129–134.Original Russian Text Copyright © 2005 by Tsaplev.This revised version was published online in April 2005 with a corrected cover date.     

Spectrophotometric determination of vanadium with 4-(1′H-1′,2′,4′-Triazolyl-3′-azo)-2-methylresorcinol

Summary 4-(1H-1,2,4-Triazolyl-3-azo)-2-methylresorcinol reacts with vanadium(V) at pH 8.10 (Tris-HClO₄ buffer solution) to produce a pink-violet 11 complex ( _max=525 nm,=2.55×10⁴l·mol^–1· cm^–1) in a 50% (v/v) methanol-water medium, which allows the spectrophotometric determination of 0.1 to 1.51 ppm of vanadium. The method has been applied for the determination of the vanadium content in low alloy steels.

---

Spectrophotometriscbe Bestimmung von Vanadin mit 4-(1H-1,2,4-triazo-lyl-3-azo)-2-methylresorcin

Zusammenfassung Vanadin bildet bei pH 8,10 (Tris-HClO₄-buffer) mit 4-(1H-1,2,4-tri-azolyl-3-azo)-2-methylresorcin ein rosenrot-violettes Chelat, dessen Absorptionsmaximum bei 525 nm in Gegenwart von 50% Methylalkohol gemessen wird. Dieser 11-Komplex entspricht bei einer Vanadin-Konzentration von 0,1–1,51g/ml dem Beerschen Gesetz; seine molare Absorptivität ist 2,55×10⁴l·mol^–1·cm^–1. Das Verfahren wurde zur Bestimmung des Vanadins in Stahl verwendet.

     

Adsorptive Catalytic Voltammetry of Physcion in the Presence of Dissolved Oxygen at a Carbon Paste Electrode

A novel electroanalytical method for the determination of physcion is described for the first time. Physcion yields an adsorption catalytic voltammetric peak at –0.74V (vs. SCE) in 0.4molL^–1 NH₄Cl–NH₃·H₂O buffer solution (pH 10.5) at a carbon paste electrode (CPE). The experimental results indicated that physcion is efficiently accumulated at a CPE by adsorption. In the subsequent potential scan, physcion was reduced to a homologous anthrahydroquinone compound. The compound was then immediately oxidized to physcion by the dissolved oxygen in the solution, and then physcion was again reduced at the CPE. As a result, a cyclic catalytic reaction was established. The second-order derivative peak current is proportional to the physcion concentration in the ranges of 2.0×10^–104.0×10^–9molL^–1 (accumulation 90s) and 4.0×10^–92.0×10^–8molL^–1 (accumulation 60s). The limit of detection is 8×10^–11molL^–1 (S/N=3) for a 120s accumulation time. The method was applied to the direct determination of physcion in the medicinal plant polygonum multiflorum Thumb with satisfactory results.     

Determination of Arsenic in Food Samples by Hydride Generation – Atomic Absorption Spectrometry

A method for the determination of trace amounts of arsenic in food samples using flow injection analysis and atomic absorption spectrometry with hydride generation (FI-HG AAS) was developed. The parameters of the flow injection system and the hydride generation were optimized with respect to reagent concentrations, atomization temperature, injection volume, reaction coil length and carrier flow rate. The limits of detection and quantification were 0.34µgL^–1 and 1.2µgL^–:1, respectively, and the analytical curve is linear up to 30.0µgL^–1 arsenic. The relative standard deviation for 12 replicates varies between 5% for 4.0µgL^–1 As and 1.8% for 30.0µgL^–1 As, with an injection frequency of up to 135h^–1. Interferences from Ni(II), Cu(II), Fe(III), Cr(III), Mo(II), Bi(III), Se(IV), Se(VI), Sb(III) and Sb(V) could be masked with a mixture of ascorbic acid-KI in a 5.0molL^–1 HCl solution. The accuracy of the proposed method was evaluated by using certified reference materials of biological samples, and the method was used to determine the content of arsenic in fish and coffee beans.     

Energy Transfer Electrogenerated Chemiluminescence for the Determination of Sulfite

A simple and novel electrogenerated chemiluminescence (ECL) method for the determination of sulfite has been developed based on the energy transfer ECL process. It was found that a weak ECL signal of sulfite was electrochemically generated on a platinum electrode in neutral aqueous solution. The signal was strongly enhanced by rhodamine B as an energy receptor and further enhanced by the neutral surfactant Tween 80. In 0.10M phosphate buffer solution (pH=7.5) containing 2.0×10^–6gmL^–1 rhodamine B and 0.4% (v/v) Tween 80, the ECL response to the concentration of sulfite at a potential of 0.82V was linear over a range of 1.0×10^–7gmL^–1 to 8.0×10^–6gmL^–1, and the detection limit was 5×10^–8gmL^–1. The relative standard deviation (n=11, 1.0×10^–6gmL^–1) was 3.8%. The proposed method has been successfully applied to the determination of sulfite in pharmaceutical injections and white sugar samples.     

Synthesis,spectral and electrochemical studies of alkoxo-bonded mixed-ligand oxovanadium(IV) and oxovanadium(V) complexes incorporating tridentate ONO donor azophenolalcoholate/aldiminealcoholates

Mixed-ligand vanadyl(IV) and vanadyl(V) complexes with tridentate ONO donor azophenolalcoholate/aldiminealcoholates [viz., 2-hydroxy-2-hydroxymethyl-5-methylazobenzene (H₂L¹), N-(2-hydroxymethylphenyl)-salicylaldimine (H₂L²) and N-(2-hydroxymethylphenyl)1-hydroxy-2-naphthaldimine (H₂L³)] and bidentate NN [viz., 2,2-bipyridine (bipy) and 1,10-phenanthroline (phen)] or NO [viz., 8-hydroxyquinoline (Hhq)] donor ligands have been prepared and characterized by elemental analyses and by i.r., e.p.r. and u.v.–vis. spectroscopies. The data show that the vanadyl(IV) complexes exist in two isomeric solid forms viz., monomers and polymers, whereas vanadyl(V) complexes exist only in the monomeric form. The polymeric structure results from intermolecular V=OV=O interactions. The complexes with NN donor ligands are one electron paramagnetic and display two ligand-field transitions in the visible region, whereas the complexes with ON donor ligands are diamagnetic and exhibit only LMCT bands. The vanadyl(IV) complexes display an irreversible oxidation peak near +0.30 V for complexes with (L¹)^2– and near +0.55 V for complexes with (L²)^2– and (L³)^2– ligands, while the vanadyl(V) complexes display a quasi-reversible one electron reduction couple near –0.23 V versus s.c.e. The trends in the (V=O), values for the visible region transitions and the redox potential values for the vanadyl(IV) complexes have been scrutinized.     

Determination of Iron in Tap and Waste Water Using Liquid–Liquid Extraction in a Flow-Injection System

A flow-injection procedure for the determination of iron(III) in water is described. The procedure is based on the formation of an ion pair between the tetraphenylarsonium (Ph₄As⁺) (TPA) or tetrabutylammonium (But₄N⁺) (TBA) cations and the tetrathiocyanatoferrate(III) complex (TTF). This ion pair is extracted with chloroform, and the absorbance of the organic phase is measured at 503nm (for Ph₄As⁺) or 475nm (for But₄N⁺). Iron concentrations higher than 0.9×10^–6molL^–1 (50µgL^–1) can be detected in the first case, with a relative standard deviation of 1.9% (n=12), a linear application rangeof between 1.34 and 54.0×10^–6molL^–1 (75–3015µgL^–1), and a sampling frequency of 30h^–1. For the ion pair with But₄N⁺, the detection limit is 0.52×10^–6molL^–1 (29µgL^–1), with a relative standard deviation of 1.6% and a linear application range between 0.73 and 54.0×10^–6molL^–1. Under the proposed working conditions, only Pd(IV), Cu(II) and Bi(III) interfere. With the application of the merging zones technique, considerable amounts of organic reagent can be saved. The TBA method was applied to the analysis of iron(III) in tap and industrial waste waters.     

Voltammetric Behavior of Dopamine at ct-DNA Modified Carbon Fiber Microelectrode

A sub-micrometer thin-layer DNA modified carbon fiber microcylinder electrode was prepared by electrodeposition of ct-DNA at 1.5V (vs. Ag/AgCl). The voltammetric behavior of dopamine (3-hydroxytyramine) was investigated at the modified electrode. It was found that the modified electrode exhibits a highly electrocatalytic activity toward dopamine oxidation. Differential pulse voltammetry was used for determination of dopamine in pH 7.4 phosphate buffer solution. A linear response of the peak current versus the concentration was found in the range of 4×10^–6 to 10^–4molL^–1 at 10^–4molL^–1 AA (ascorbic acid) coexistence (R=0.9959) and the range of 6×10^–5 to 10^–3molL^–1 at 10^–3molL^–1 AA (R=0.9960). The presence of a high concentration of ascorbic acid did not interfere with the determination. The proposed method exhibited good recovery and reproducibility. This method can be applied to the detection of DA in real samples.     

Tris(2-ethylhexyl)phosphate as an extractant for quadrivalent tin,with subsequent determination with pyrocatechol violet in alloy samples

The solvent extraction of tin(IV) from chloride media withtris(2-ethylhexyl)phosphate is presented. Tin(IV) is extracted quantitatively from 2.75–3.20 mol dm^–3 hydrochloric acid using 6.38–6.91 mol dm^–3 tris(2-ethyl-hexyl)phosphate dissolved in toluene as an extractant. After back-extraction of tin(IV) with water from thetris(2-ethylhexyl)phosphate phase, it is estimated spectrophotometrically following complexation with pyrocatechol violet. The recommended range for determination of tin(IV) is 10–100 g. The probable extracted species is SnCl₄·2TEHP. The method is applicable to the analysis of alloy samples with a detection limit of 0.4 g/ml (for 10 g of tin) and a relative standard deviation between 0.21–0.32%.     

Selective and sensitive extraction spectrophotometric method for the determination of vanadium (V) as a mixed ligand complex withN-phenyl benzohydroxamic acid and 4-(2-pyridylazo)resorcinol in non-aqueous media

A selective, sensitive and direct method for the spectrophotometric determination of vanadium in steels is developed in which vanadium is extracted withN-phenyl benzohydroxamic acid (PBHA) into chloroform from 5M hydrochloric acid medium followed by colour development by addition of 4-(2-pyridylazo)resorcinol (PAR) inN,N-dimethyl formamide (DMF). The vanadium(V)-PBHA-PAR mixed ligand complex shows maximum absorbance at 560 nm with a molar absorptivity 3.6 × 10⁴ l mol^–1 cm^–1 and obeys Beer's law up to 2.0 g/ml of vanadium. The composition of the mixed ligand complex is determined by Job's method of continuous variations which revealed a 1 1 1 ratio for V(V) PBHA PAR. This method can be directly applied for the determination of vanadium in steels, while in the case of titanium base alloys, after separation of titanium matrix it gives good results even at 50–200 g of vanadium per gram level.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

Determination of Heavy Metal Ions in Chinese Herbal Medicine by Microwave Digestion and RP-HPLC with UV-Vis Detection

A new method for the simultaneous determination of heavy metal ions in Chinese herbal medicine by microwave digestion and reversed-phase high-performance liquid chromatography (RP-HPLC) has been developed. The Chinese herbal medicine samples were digested by microwave digestion. Lead, cadmium, mercury, nickel, copper, zinc, and tin ions in the digested samples were pre-column derivatized with tetra-(4-chlorophenyl)-porphyrin (T₄-CPP) to form the colored chelates which were then enriched by solid phase extraction with C₁₈ cartridge and eluted from the cartridge with tetrahydrofuran (THF). The chelates were separated on a Waters Xterra RP₁₈ column by gradient elution with methanol (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) and THF (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) as mobile phase at a flow rate of 0.5mLmin^–1 and detected with a photodiode array detector in the range of 350–600nm. In the original samples the detection limits of lead, cadmium, mercury, nickel, copper, zinc and tin are 4ngL^–1, 3ngL^–1, 6ngL^–1, 5ngL^–1, 2ngL^–1, 6ngL^–1, and 4ngL^–1, respectively. This method was applied to the determination of lead, cadmium, mercury, nickel, copper, zinc and tin in Chinese herbal medicine samples with good results.     

Conductivity and interfacial behaviour of bis-1,4-dioxapentyl sulfate (IV) and 1,4,7-trioxaoctyl sulfate (IV) based electrolyte for lithium batteries

The electrolytic conductivity and viscosity of lithium perchlorate in bis-1,4-dioxapentyl sulfate (IV) [OS22] and 1,4,7-trioxaoctyl sulfate (IV) [OS32] were determined as a function of salt concentration (0.00005–2 M) and temperature (286–318 K). At 298 K, the highest conductivity (=2.77×10^{–3 –1} cm^–1) was achieved for OS22 based solutions containing 1–2 M LiClO₄. Formation of electrically neutral ion pairs appeared to be the main reason for a continuous decline in the molar conductivity () observed in dilute solutions with increasing salt concentration. Additionally, an increase in the dynamic viscosity () accounted for a decrease in the mobility of charge carriers with increasing length of the oxaalkyl chain in the podand molecules. The temperature dependence of the conductivity and viscosity was found to be of the Arrhenius type for both systems investigated, while the activation energies, E ^# and E ^#, varied in parallel with the degree of interionic aggregation. CVs obtained on a polycrystalline Pt electrode indicated the electrochemical stability of OS22 in the potential range between –0.8 V and 4.7 V versus Li⁺/Li. A linear current density–potential dependence, with the same slope for the anodic and cathodic branches proved the reversibility of lithium electrodeposition and re-dissolution at the Pt/1 M LiClO₄+OS22 interface.