Long-distance femtosecond laser filaments in air

This paper reviews the recent studies of filamentation of femtosecond lasers pulses in air in the Institute of Physics, Chinese Academy of Sciences. The filamentation mechanisms of free propagated femtosecond laser pulses, effect of air turbulence on the filamentation, interaction between filaments are presented.     

Chirp-induced dynamics of femtosecond filaments in air

We investigate the influence of a chirped phase on femtosecond pulses propagating in air. Pulses with an initially negative chirp are temporally compressed by compensation with group-velocity dispersion. We demonstrate that this property, combined with plasma defocusing, can be used to trigger filamentation at different foci, increase self-guiding ranges, or even shorten pulse duration.     

Triggering and guiding high-voltage discharge in air by single and multiple femtosecond filaments

The abilities to trigger and guide high-voltage discharge by using single and multiple filaments (MFs) are experimentally studied. It is shown that the discharge voltage threshold can be reduced significantly in both regimes of single and MF; however, the MF does not gain a larger reduction than a single filament. This behavior of the MF is attributed to the single discharge path rather than simultaneous multiple ones as one might expect during the discharge process.     

Coherent subterahertz radiation from femtosecond infrared filaments in air

We report on what is believed to be the first observation of coherent subterahertz (sub-THz) emission from a 1-m string in the atmosphere. The sub-THz pulse emitted by the filamentary structure from an intense IR femtosecond laser pulse is detected perpendicularly to the laser propagation axis by use of two heterodyne detectors at 94+/-1 and 118+/-1GHz . We describe the characteristics of this emission and show evidence of constructive interference between two separate strings.     

Calorimetric detection of THz radiation from femtosecond filaments in air

Calorimetric measurements of the THz radiation from plasma filaments created in air by intense IR fs laser pulses were performed. The decay kinetics of the THz radiation from this extended plasma source is shown to be different from that of a localized air plasma source produced by the same laser. PACS 42.65.Wi; 42.65.Re; 52.40.Db     

Interaction of light filaments generated by femtosecond laser pulses in air

The interaction of two light filaments propagating in air is simulated. Simulations show that the interaction of the two light filaments displays interesting features such as attraction, fusion, repulsion, and spiral propagation, depending on the relative phase shift and the crossing angle between them. A long and stable channel can be formed by fusing two in-phase light filaments. The channel becomes unstable with the increase of the crossing angle and phase shift. The interaction of two light filaments in different planes is studied and the spiral propagation is observed.     

Control and characterization of multiple circularly polarized femtosecond filaments in argon

We provide what is believed to be the first experimental evidence of spatial control on multiple filamentation (MF) using circularly polarized femtosecond laser pulses. The exceptional shot-to-shot reproducibility of the MF pattern allowed complete characterization of the two copropagating high-energy filaments, revealing for the first time temporal (self-) compression of circularly polarized filamenting pulses to a fifth of the initial 57 fs laser pulse duration without any sophisticated chirp control. Compared with LP MF, an enhancement in spatial stability and an increase in energy throughput are reported for circular input polarization.     

Concatenation of plasma filaments created in air by femtosecond infrared laser pulses

We report the first observation of the attachment of two single plasma filaments created collinearly in the atmosphere by IR femtosecond laser pulses. The linked filamentary structure is electrically conductive and emits sub-THz radiation over its entire length. Concatenation is achieved only for a specific time ordering between the two initial laser pulses. The pulse producing the filament closer to the laser source must be retarded with respect to the other pulse. This special time ordering is attributed to the acceleration of light in a self-guided pulse. Received: 4 March 2003 / Published online: 14 May 2003 RID="*" ID="*"Corresponding author. Fax: +33-1/6931-9996, E-mail: stzortz@ensta.fr     

Comparative investigation of resistance and ability to trigger high voltage discharge for single and multiple femtosecond filaments in air

A comparative investigation of resistance and ability to trigger high voltage (HV) discharge for single filament (SF) and multiple filaments (MF) has been carried out. The experimental results show that the trend of the breakdown threshold of the SF exactly follows that of its resistance, but this is not the case for the MF. The MF's resistance is much smaller than SF's. However, the MF shows a bit higher HV breakdown threshold than the SF. The underlying physics is that the measured resistance of the MF is collectively contributed by every filament in the MF while the HV breakdown threshold is determined by only one single discharging path.     

Comparative investigation of the resistance and ability to trigger high voltage discharge for single and multiple femtosecond filaments in air

A comparative investigation of the resistance and ability to trigger high voltage(HV) discharge for a single filament(SF) and multiple filaments(MFs) has been carried out.The experimental results show that the trend of the breakdown threshold of the SF exactly follows that of its resistance,but this is not the case for the MF.The MF’s resistance is much smaller than the SF’s.However,the MF shows a slightly higher HV breakdown threshold than the SF.The underlying physics is that the measured resistance of the MF is collectively contributed by every filament in the MF while the HV breakdown threshold is determined by only one single discharging path.     

Self-healing femtosecond light filaments

A recent experiment [Appl. Phys. Lett. 83, 213 (2003)] indicated that filaments created in femtosecond high-power pulses propagating in air are surprisingly robust when interacting with microscopic water droplets. We present numerical modeling of the dynamics of the filament-droplet interaction. Our simulation results provide further insight into the interplay between the filament's core and the wide transverse pedestal of the pulse. It is shown that the robustness of the filament comes from the transverse low-intensity pedestal that controls the formation of the central hot spot. Implications for penetration of wide, high-power beams through obscurants are discussed.     

Energy exchange process among multiple filamentary femtosecond laser beams in air

正Dear Editors,Energy exchange between two filamentary pulses was demonstrated in several experiments[1-4],and the energytransfer direction depends on the time delay between filamentary pulses,the initial chirp,the laser intensities,the location,the crossing angle and the relative polarization.However,the understanding of the physical mechanisms of energy ex-     

On the higher-order Kerr effect in femtosecond filaments

A recent experiment probing the electronic nonlinearity in the femtosecond filament indicated that the optical Kerr effect not only saturates but even changes its sign at high intensities and thus switches from self-focusing to a strongly defocusing regime. Here we examine, through simulations and experiment, some implications of such a behavior. We perform comparative simulations based on the standard model on one hand and on a model implementing the intensity-dependent Kerr effect on the other. Comparison with an experiment provides a strong indication that of these two Kerr-effect models the standard model is better in capturing the observed length of the filament. However, neither of the models can reproduce length and filament radius. Possible implications are discussed.     

Remote sub-diffraction imaging with femtosecond laser filaments

Achieving super-resolution has become a scientific imperative for remote imaging of objects and scenes needing increased detail and has motivated the development of various laser-based techniques. We demonstrate a scheme which achieves subdiffraction imaging of remote objects by using femtosecond laser filaments. The use of laser filaments for imaging is destined to have applications in many environments.     

Few-cycle light bullets created by femtosecond filaments

We report a generic mechanism of light bullet formation during the filamentation of femtosecond pulses. This mechanism is tested for gaseous and dense media. It allows the production of robust, sub-10 fs structures of light with no post-compression stage. By coupling an infrared pump with a seed beam, tunable pulses with durations down to a few femtoseconds can be generated by parametric processes.     

Amplification of femtosecond laser filaments in Ti:sapphire

Femtosecond laser filamentation is studied in a broadband amplifying medium, sapphire doped with electronically excited Ti ions. Evidence for fluence amplification of self-guided pulses, increase of filamentation length, as well as a lowering of the input laser power necessary for filamentation is reported.     

Interaction of femtosecond light filaments with obscurants in aerosols

The interaction of ultrashort laser pulses with opaque droplets in the atmosphere is examined numerically. Intense filaments resulting from the balance between self-focusing and ionization of air molecules are shown to be robust against obscurants sized up to 2/3 of the filament diameter. (3D+1)-dimensional numerical simulations confirm recent experimental data [F. Courvoisier et al., Appl. Phys. Lett. 83, 213 (2003)]. The filament is rapidly rebuilt with minimal loss of energy over a few cm after the interaction region. The replenishment of the pulse mainly proceeds from the nonlinear attractor responsible for the formation of a spatial soliton modeling the filament core.     

飞秒光丝中等离子体密度时间演化特征

采用能够较为清晰、完整描述强飞秒激光等离子体通道内带电粒子产生过程及其演化的物理模型,进一步研究了飞秒光丝中等离子体密度的时间演化特征。计算结果表明:对于不同时间线型的脉冲,在等离子体通道形成过程中,氧气分子的电离贡献率及氮气分子的贡献率明显不同,不同线型的脉冲对高效维持高密度等离子体的寿命具有较大的影响。有效控制成丝脉冲线型能够达到对等离子体通道的高效利用。长脉冲、短波长虽能够获得较高密度等离子体通道,但其存活寿命却完全受限于通道的后期演化。     

飞秒光丝中等离子体密度时间演化特征

采用能够较为清晰、完整描述强飞秒激光等离子体通道内带电粒子产生过程及其演化的物理模型,进一步研究了飞秒光丝中等离子体密度的时间演化特征。计算结果表明：对于不同时间线型的脉冲,在等离子体通道形成过程中,氧气分子的电离贡献率及氮气分子的贡献率明显不同,不同线型的脉冲对高效维持高密度等离子体的寿命具有较大的影响。有效控制成丝脉冲线型能够达到对等离子体通道的高效利用。长脉冲、短波长虽能够获得较高密度等离子体通道,但其存活寿命却完全受限于通道的后期演化。