Fabrication of MgO barrier for a magnetic tunnel junction in as-deposited state using amorphous RE–TM alloy

MgO (1 0 0) textured films on Fe buffer layer with (1 0 0) preferential orientation were prepared by a reactive facing targets sputtering system at a substrate temperature of 100 °C during MgO deposition. This process can allow fabrication of MgO (1 0 0) tunneling barrier layer without high-temperature annealing process after the sputter-deposition. In addition, FeCo (1 0 0) preferred orientation films prepared on GdFeCo layers were improved with GdFeCo thickness. MgO films deposited on Fe (or FeCo) buffer layers revealed apparent (1 0 0) preferred orientation at the early stage of the film growth. 3 nm-thick MgO films deposited on GdFeCo [100 nm]/Fe [3 nm] exhibited (1 0 0) texture. Magnetic characteristic of perpendicular-magnetic tunnel junction (P-MTJ) element with the structure of GdFeCo [100 nm]/Fe [3 nm]/MgO [3 nm]/Fe [3 nm]/TbFeCo [100 nm] exhibited high squareness ratio of 0.8 and coercivity of free layer as low as 117 Oe by anomalous Hall effect, and (1 0 0) preferred orientation of 3 nm-thick MgO layer was observed by an X-ray diffractometer.     

Effects of MgO Thickness and Roughness on Perpendicular Magnetic Anisotropy in MgO/CoFeB/Ta Multilayers

The dependence of perpendicular magnetic anisotropy(PMA) on the barrier layer MgO thickness in MgO/CoFeB/Ta multilayers is investigated.The results show that the strongest PMA occurs in a small window of about2-4nm with the increase of MgO thickness from l-10 nm.The crystalline degree of MgO and the change of interatomic distance along the out-of-plane direction may be the main reasons for the change of PMA in these multilayers.Moreover,the roughnesses of 2- and 4-nm-thick MgO samples are 3.163 and 1.8nm,respectively,and both the samples show PMA.These results could be used to tune the magnetic characteristic of the ultra thin CoFeB film for future applications in perpendicular magnetic devices.     

Strain relief of heteroepitaxial bcc-Fe(001) films

The strain relief of heteroepitaxial bcc-Fe(001) films, deposited at 520-570 K onto MgO(001), has been investigated by scanning tunneling microscopy. In accordance with real-time stress measurements, the tensile misfit strain is relieved during coalescence of flat, mainly 2-3 monolayers (ML) high Fe islands at the high thickness of approximately 20 ML. To accommodate the misfit between merging strain-relaxed islands, a network of 1/2[111] screw dislocations is formed. A strong barrier for dislocation glide--which is typical for bcc metals--is most likely responsible for the big delay in strain relief of Fe/MgO(001), since only the elastic energy of the uppermost layer(s) is available for the formation of an energy-costly intermediate layer.     

Tunneling magnetoresistance on the subnanometer scale

The influence of the finite thickness and structure, amorphous or crystalline, of Fe electrodes on the tunneling magnetoresistance (TMR) ratio is investigated by ab initio calculations in Fe/MgO/Fe tunnel junctions. An amorphous Fe layer in direct contact with the MgO barrier causes a low TMR ratio of only 44%. By inserting crystalline Fe monolayers between the barrier and the amorphous Fe the TMR ratio increases rapidly and reaches the same level as for semi-infinite Fe electrodes. Even one crystalline Fe monolayer is sufficient to achieve a giant TMR ratio exceeding 500%. Omitting the amorphous Fe has nearly no influence on the results if there are more than two monolayers of crystalline Fe next to the barrier. The results demonstrate that the reservoirs can even be nonmagnetic. The TMR emerges from the interplay of symmetry selection in the barrier and spin filtering at the electrode-barrier interface.     

Disturbance of tunneling coherence by oxygen vacancy in epitaxial Fe/MgO/Fe magnetic tunnel junctions

Oxygen vacancies in the MgO barriers of epitaxial Fe/MgO/Fe magnetic tunnel junctions are observed to introduce symmetry-breaking scatterings and hence open up channels for noncoherent tunneling processes that follow the normal WKB approximation. The evanescent waves inside the MgO barrier thus experience two-step tunneling, the coherent followed by the noncoherent process, and lead to lower tunnel magnetoresistance, higher junction resistance, as well as increased bias and temperature dependence. The characteristic length of the symmetry scattering process is determined to be about 1.6 nm.     

Study of MgO tunnel barriers with conducting atomic force microscopy

The local topographic and conducting properties of ultra-thin MgO films with polycrystalline Ru and amorphous CoFeB as lower electrodes were investigated. The local conductance and topography of the ultra-thin MgO films (from 0.5 to 1.0 nm) were simultaneously measured with a modified conducting atomic force microscope (CAFM). The imaging force was carefully chosen in order to avoid structural damages in the insulating layers. The promising results include the decrease of the density of hotspots with large conductance with the thickness of MgO and show that an insulating barrier is obtained at 1 nm thickness.     

Electric and thermo spin transfer torques in Fe/Vacuum/Fe tunnel junction

We present first-principle calculations of electric and thermo spin transfer torques (STT) in Fe/Vacuum(Vac)/Fe magnetic tunnel junctions (MTJs). Our quantitative studies demonstrate rich bias dependence of STT and tunnel magneto resistance (TMR) behaviors with respect to the interface roughness. Thermoelectric effects in Fe/Vac/Fe MTJs is remarkable. We observe larger ZT of 6.2 in 8 ML clean Vacuum barrier, where the heavily restrained thermal conductance should be responsible for. Thermo-STT in Fe/Vac/Fe MTJs show same order as that in Fe/MgO/Fe MTJs with similar barrier thickness.     

0-π oscillations in nanostructured Nb/Fe/Nb Josephson junctions

The physics of the π phase shift in ferromagnetic Josephson junctions may enable a range of applications for spin-electronic devices and quantum computing. We investigate transitions from “0” to “π” states in Nb/Fe/Nb Josephson junctions by varying the Fe barrier thickness from 0.5 nm to 5.5 nm. From magnetic measurements we estimate for Fe a magnetic dead layer of about 1.1 nm. By fitting the characteristic voltage oscillations with existing theoretical models we extrapolate an exchange energy of 256 meV, a Fermi velocity of 1.98 ×10⁵ m/s and an electron mean free path of 6.2 nm, in agreement with other reported values. From the temperature dependence of the I_CR_N product we show that its decay rate exhibits a nonmonotonic oscillatory behavior with the Fe barrier thickness.     

Magnetic Behaviour of Sm2Co7/Fe/Sm2 Co7, Nanocomposite Trilayers with Cr and Ti Additions

Trilayered Sm2Co7/Fe/Sm2Co7 spring exchange magnets are fabricated by dc magnetron sputtering on MgO substrates. Very thin layers （0.3-0.7 nm） of Cr and Ti are added at the interfaces of the two magnetic phases. The thickness of StucCo7 is kept at 20nm and Fe at 6nm while the thickness of Cr and Ti are varied as 0.3, 0.5, and 0.7nm. The base pressure of sputtering chamber is kept below 10^-7 Torr and Ar pressure at 3-8m Torr. The samples are characterized by x-ray diffraction （XRD） and SQUID magnetometer. We report improvement in exchange coupling of nonacomposite magnets by addition of thin layers of Cr at interfaces.     

Evidence of a symmetry-dependent metallic barrier in fully epitaxial MgO based magnetic tunnel junctions

We report on the experimental observation of tunneling across an ultrathin metallic Cr spacer layer that is inserted at the interface of a Fe/MgO/Fe(001) junction. We show how this remarkable behavior in a solid-state device reflects a quenching in the transmission of particular electronic states, as expected from the symmetry-filtering properties of the MgO barrier and the band structure of the bcc Cr(001) spacer in the epitaxial junction stack. This ultrathin Cr metallic barrier can promote quantum well states in an adjacent Fe layer.     

Effect of Ta buffer layer and TaO x barrier thickness on the evolution of the structural and magnetic properties of the Fe/TaO x /Co trilayers

Fe/TaO _x /Co trilayers were grown on Si(100)/SiO₂ substrates and on tantalum buffer layers by a high vacuum magnetron sputtering system. The effects of both Ta buffer layer and tantalum-oxide barrier layer thickness on the structural and magnetic properties and the coupling of the ferromagnetic layers have been studied. It was observed that Ta improves the structural properties of the Fe layer resulting in an increased coercive field. For a barrier thickness of 4 nm a weak decoupling starts to appear between the ferromagnetic layers and a clear step formation is observed with increasing thickness. The minor hysteresis loops predict an interlayer coupling for thin barriers. The annealing of trilayers up to 250°C shows an increased coercivity for only the Fe layer. Annealing further at 400°C has the opposite effect of decreasing the coercivity, indicating intermixing at the interfaces of the Fe. The refractive index of the insulator barrier shows that the barrier layer is not totally in the form of tantalum-pentoxide.     

NiO-thickness dependent magnetic anisotropies in Fe/NiO/Au(001) and Fe/NiO/MgO(001) systems

The in-plane magnetic anisotropy of Fe/NiO bilayers was studied quantitatively as a function of NiO thickness using the magneto-optical Kerr effect with a rotating field. For NiO thicker than the ordering transition thickness, the total in-plane fourfold anisotropy of the Fe layer decreases with NiO thickness in Fe/NiO/Au(001), but increases in Fe/NiO/MgO(001). Our result indicates that the exchange coupling in an Fe/NiO bilayer might induce an additional in-plane fourfold anisotropy, and the opposite thickness dependent behaviors may be attributed to the different Ni²⁺ antiferromagnetic spin orientations for NiO films grown on Au(001) and MgO(001) surfaces.     

MgO单晶势垒磁性隧道结的第一性原理计算和实验研究

在MgO单晶势垒磁性隧道结中发现的室温高隧穿磁电阻现象,是近些年自旋电子学以及磁性隧道结磁电阻材料研究中的又一重大突破.本文主要评述和介绍2001年以来MgO单晶势垒磁性隧道结第一性原理计算和实验上的重要进展,以及介绍利用Layer-KKR第一性原理计算方法研究的Fe(001)/MgO/Fe、Fe(001)/FeO/MgO/Fe、Fe(001)/Mg/MgO/Fe、Fe(001)/Co/MgO/Co/Fe和Fe(001)[MgO/Fe/MgO/Fe等基于单晶MgO(001)单势垒及双势垒磁性隧道结材料的电子结构和自旋相关输运性质研究的最新进展.这些第一性原理定量计算的结果,不仅从物理上增强了对MgO单晶势垒磁性隧道结的电子结构和自旋相关输运特性的了解,而且对于研究新型室温磁电阻隧道结材料及其在自旋电子学器件中的广泛应用,具有一定的参考价值.     

Low-height sputter-deposited magnesium oxide tunnel barriers: experimental report and free electron modeling

Magnetic tunnel junctions with a barrier of magnesium oxide were prepared by plasma oxidation of sputter-deposited magnesium. They show magnetoresistance ratios up to 4.5% at room temperature and 5.5% at low temperatures for barrier thickness of 1.6 nm. The material exhibits low barrier heights of around 0.7 eV. These junctions follows the predictions of the free electron model which contrast with the predictions of band structure calculations and experimental results on epitaxial MgO based tunnel junctions.Received: 23 April 2004, Published online: 3 August 2004PACS: 73.40.Rw Metal-insulator-metal structures - 75.70.Pa Giant magnetoresistance - 73.40.Gk Tunneling - 73.61.Ng Insulators     

First-principle study on the electronic structure and magnetic properties in Fe/MgO/Fe magnetic tunnel junction with Mg insertion layer

The effect of a Mg insertion layer between the Fe electrode and the MgO barrier layer on the electronic structure and magnetic properties of Fe/MgO/Fe magnetic tunnel junction has been studied by first-principle method. Two models of (a) Fe(1 0 0)/MgO(1 0 0)/Fe(1 0 0) and (b) Fe(1 0 0)/Mg/MgO(1 0 0)/Mg/Fe(1 0 0) were established. Our calculation results show that the Mg insertion layer has enhanced both the spin polarization and the magnetic moment of its adjacent Fe layer. The results have been discussed in terms of the variation in the DOS features and charge transfer with the Mg insertion layer.     

Structure of sputter-deposited Pt/Fe and Cr/Fe multilayers

Conversion electron Mössbauer spectroscopy (CEMS) and X-ray diffraction (XRD) have been used to investigate the structure of Pt/Fe and Cr/Fe multilayers deposited by magnetron sputtering. The Cr/Fe samples consisted of four samples prepared under Ar sputtering pressures of 1.3, 3.0, 5.0, and 10.0 mT, all with the same multilayer structure of 3.5 nm Cr/2.5 nm Fe, repeated 35 times onto c-Si wafer substrates. The quality of the interfaces between Cr and Fe is clearly degraded with increasing sputter pressure, as seen by changes in the relative intensities of four magnetic subspectra in the CEMS and the gradual appearance of a single-line resonance similar to Fe in solution in Cr. The low-angle XRD superlattice peaks also disappear with increasing sputter pressure, while the high-angle XRD shows a tendency for loss of the preferred (110) texture. Two films of Pt/Fe were deposited epitaxially onto MgO single crystals with bilayer periods of 1.3 nm and 2.6 nm and total thickness of 300 nm each. A transition from fcc-PtFe with near-perpendicular magnetic anisotropy to a bcc-Fe/fcc-PtFe mixture with in-plane magnetic texture is observed by CEMS for the factor of two increase in bilayer period.     

First-principles theory of quantum well resonance in double barrier magnetic tunnel junctions

Quantum well (QW) resonances in Fe(001)/MgO/Fe/MgO/Fe double barrier magnetic tunnel junctions are calculated from first principles. By including the Coulomb blockade energy due to the finite size islands of the middle Fe film, we confirm that the oscillatory differential resistance observed in a recent experiment [T. Nozaki, Phys. Rev. Lett. 96, 027208 (2006)10.1103/PhysRevLett.96.027208] originates from the QW resonances from the Delta1 band of the Fe majority-spin channel. The primary source of smearing at low temperatures is shown to be the variation of the Coulomb blockade energy.     

Thermal and irradiation induced interdiffusion in magnetite thin films grown on magnesium oxide (0 0 1) substrates

Epitaxial Fe₃O₄(0 0 1) thin films (with a thickness in the range of 10-20 nm) grown on MgO substrates were characterized using low-energy electron diffraction (LEED), conversion electron Mössbauer spectroscopy (CEMS) and investigated using Rutherford backscattering spectrometry (RBS), channeling (RBS-C) experiments and X-ray reflectometry (XRR). The Mg out-diffusion from the MgO substrate into the film was observed for the directly-deposited Fe₃O₄/MgO(0 0 1) films. For the Fe₃O₄/Fe/MgO(0 0 1) films, the Mg diffusion was prevented by the Fe layer and the surface layer is always a pure Fe₃O₄ layer. Annealing and ion beam mixing induced a very large interface zone having a spinel and/or wustite formula in the Fe₃O₄-on-Fe film system.     

‘In-situ’ ink-jet printed Fe-doped MgO thin films with tunable ferromagnetism

Magnetism in wide band gap materials is of great interests for future spintronic device applications. We prepared MgO and Fe-doped MgO films ‘in-situ’ on substrates by inkjet printing, and investigated the ferromagnetism tuned by the doping of Fe, the annealing temperature and the film thickness. It is found that the Fe-doping improves the crystallinity of the films with lattice structure changed by annealing temperature. The saturation magnetization (M_s) of the films enhanced by ~5 times comparing with the pure MgO thin film of similar thickness (~90 nm), because of both the long-range ordering of localized 3d electrons in Fe and the defects induced magnetism. The M_s at 5 K decreases with the film thickness, which is mainly attributed to the interface induced ferromagnetism. The Fe-doped MgO films with ferromagnetism in this work can be used in future spintronic devices.     

反应磁控溅射ZnO/MgO多量子阱的光致荧光光谱分析

采用反应射频磁控溅射方法，在Si(001)基片上制备了具有高c轴择优取向的ZnO/MgO多量子阱.利用X射线反射、X射线衍射、电子探针，光致荧光光谱等表征技术，研究了ZnO/MgO多量子阱的结构、成份和光致荧光特性.研究结果表明，多量子阱的调制周期在1.85—22.3 nm之间，所制备的多量子阱具有量子限域效应，导致了室温光致荧光峰的蓝移，并观测到了量子隧穿效应引起的荧光效率下降.建立了基于多声子辅助激子复合跃迁理论的室温光致荧光光谱优化拟合方法，通过室温光致荧光光谱拟合发现，ZnO/MgO比ZnO/ZnMgO多量子阱具有更大的峰位蓝移，探讨了导致光致荧光光谱展宽的可能因素. 关键词： ZnO/MgO 多量子阱 磁控溅射 光致荧光 量子限域效应