Stress analysis of the cylinder subjected to arbitrarily distributed axisymmetrical loads

Summary Stress analysis has been carried out for a finite cylinder subjected to arbitrarily distributed axisymmetrical surface loads. Direct stress _x in the axial direction is assumed to be of the form _x = ₀+r ₁ +r ₂ where ₀ to ₂ are functions of x. Using the equations of equilibrium and compatibility the other direct stresses and the shearing stress are expressed by ₁ and ₂. Fundamental equations governing ₁ and ₂ are introduced using the variational principle of complementary energy. From the results of the present analysis it is evident that the boundary conditions can be satisfied completely even for the case where the external forces are specified in complicated form, and that more accurate solutions can easily be obtained by introducing additional terms in _x.

---

Spannungsanalyse für den Zylinder unter axialsymmetrischer Last in beliebiger Verteilung

Übersicht Für einen endlichen Zylinder unter axialsymmetrischer Oberflächenlast in beliebiger Verteilung werden die Spannungen ermittelt. Die Normalspannung in Axialrichtung wird in der Form _x = ₀+r ₁ +r ₂ angesetzt mit ₀, ₁, ₂ als Funktionen von x. Mit Hilfe der Gleichgewichtsund Verträglichkeitsbedingungen werden die anderen Normalspannungen und die Schubspannung durch ₁ und ₂ ausgedrückt. Über das Variationsprinzip für die Komplementärenergie werden die grundlegenden Gleichungen für ₁ und ₂ eingeführt. Die Ergebnisse zeigen, daß die Randbedingungen selbst für komplizierte Belastungsarten vollständig erfüllbar sind und mit zusätzlichen Termen in _x mühelos noch genauere Lösungen bestimmt werden können.

     

Zur Variationsformulierung nichtlinearer Randwertprobleme

Übersicht Es werden verschiedene Bedingungen aufgestellt, die es erlauben, die durch die beiden (Systeme von) nichtlinearen DifferentialgleichungenA (u, ) = q, B (u, ) = und Randbedingungen zusammen mit den nichtlinearen algebraischen Relationenq = C(u, ), = D(u, ) beschriebene Aufgabe durch äquivalente Variationsprobleme zu ersetzen. Dabei zeigt sich ein enger Zusammenhang mit den in der Festkörpermechanik wohlbekannten Prinzipien der virtuellen Verschiebungen und der virtuellen Kräfte. Die auf systematischem Weg konstruierten Variationsfunktionale enthalten viele in der Physik bekannte Funktionale als Sonderfälle, insbesondere jene, die in der Elastomechanik nach Green, Castigliano, Hellinger, Reißner, Hu und Washizu benannt werden.

---

Summary In this paper there are established various conditions which allow a variational formulation of the problem described by the two (systems of) nonlinear differential equationsA(u, ) = q, B(u, ) = and boundary conditions together with the nonlinear algebraic relationsq = C(u, ), = D(u, ). Besides a close relationship is revealed to the principles of virtual displacements and virtual forces which are wellknown in solid mechanics. The systematically constructed variational functional contain many functionals in physics as special cases, mainly those of Green, Castigliano, Hellinger, Reißner, Hu and Washizu in elastomechanics.

     

Theoretical derivation of tangential velocity profiles in a flat vortex chamber-influence of turbulence and wall friction

Summary As part of a study on the hydrodynamics of a cyclone separator, a theoretical investigation of the flow pattern in a flat box cyclone (vortex chamber) has been carried out. Expressions have been derived for the tangential velocity profile as influenced by internal friction (eddy viscosity) and wall friction. The most important parameter controlling the tangential velocity profile is = –u ₀ R/(v+ ), where u ₀ is the radial velocity at the outer radius R of the cyclone, the kinematic liquid viscosity and is the kinematic eddy viscosity. For values of greater than about 10 the tangential velocity profile is nearly hyperbolic, for smaller than 1 the tangential velocity even decreases towards the centre. It is shown how and also the wall friction coefficient may be obtained from experimental velocity profiles with the aid of suitable graphs. Because of the close relation between eddy viscosity and eddy diffusion, measurements of velocity profiles in flat box cyclones will also provide information on the eddy motion of particles in a cyclone, a motion reducing its separation efficiency.List of symbols A cross-sectional area of cyclone inlet - h height of cyclone - p static pressure in cyclone - p static pressure difference in cyclone between two points on different radius - r radius in cyclone - r ₁ radius of cyclone outlet - R radius of cyclone circumference - u radial velocity in cyclone - u ₀ radial velocity at circumference of flat box cyclone - v tangential velocity - v ₀ tangential velocity at circumference of flat box cyclone - w axial velocity - z axial co-ordinate in cyclone - friction coefficient in flat box cyclone (for definition see § 5) - ₁ value of friction coefficient for ₁<< ₂ - ₂ value of friction coefficient for ₂<<1 - = - ₁ value of for ₁<< ₂ - ₂ value of for ₂<<1 - thickness of laminar boundary layer - =/h - turbulent kinematic viscosity - ratio of z to h - k ratio of height of cyclone to radius R of cyclone - parameter describing velocity profile in cyclone =–u ₀ R/(+) - kinematic viscosity of fluid - density of fluid - ratio of r to R - ₁ value of at outlet of cyclone - ₂ value of at inner radius of cyclone inlet - _w shear stress at cyclone wall - angular momentum in cyclone/angular momentum in cyclone inlet - ₁ value of at = ₁ - ₂ value of at = ₂     

Viscous properties of soil

Dynamic problems connected with the wave propagation in soils not saturated with water and with wave interaction with obstacles and structural elements at the present time are solved on the basis of models in which plastic but not viscous soil properties are taken into account [1–5]. An analysis of experimental data and their comparison with the calculated results [4, 5] confirms that it is permissible to apply the model of an elasticplastic medium to soils in problems concerning the interaction of waves and structures. At the same time plane-wave damping in soils takes place more intensively than would follow from calculations carried out on the basis of models of an elastic-plastic medium. For example, if in a section of a poured sandy soil, taken as the initial section, the maximum stress in the wave is _m=ll kgf/cm² and its duration is 6=8 msec, then at a distance of 25 cm the calculations give _m=9.5 kgf/cm², while the experiment gives _m= 5 kgf/cm². If in the initial section _m= 20 kgf/cm² and =6 msec, then at a distance of 35 cm the calculation gives _m= l7 kgf/cm², while the experiment gives _m= 9 kgf/cm². In the calculations it was assumed that unloading takes place with a constant strain. This deviation of the calculated results from the experiment can be explained, in the first place, by the dependence of the () on the strain rate , which is not taken into account in the model of an elastic-plastic medium. The viscous properties cause additional energy losses and a more intensive damping of the waves. Experimentally the dependence of the () curves on the strain rate has been investigated for many soils [5–8]. The dynamic load on the test sample was produced by a body falling from a height or being accelerated by some method. Below we present test results of viscous soil properties when the test sample is compressed by an air shock wave. Compression curves and approximate numerical values of the coefficient of viscosity are obtained.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, Vol. 9, No. 4, pp. 68–71, July–August, 1968.The author thanks A. I. Shishikin for his participation in the experiments.     

Transport in ordered and disordered porous media V: Geometrical results for two-dimensional systems

In this paper we continue the geometrical studies of computer generated two-phase systems that were presented in Part IV. In order to reduce the computational time associated with the previous three-dimensional studies, the calculations presented in this work are restricted to two dimensions. This allows us to explore more thoroughly the influence of the size of the averaging volume and to learn something about the use of anon-representative region in the determination of averaged quantities.

Nomenclature

Roman Letters A interfacial area of the– interface associated with the local closure problem, m² - a _i i=1, 2, gaussian probability distribution used to locate the position of particles - l unit tensor - characteristic length for the-phase particles, m - ⁰ reference characteristic length for the-phase particles, m - characteristic length for the-phase, m - _i i=1,2,3 lattice vectors, m - m convolution product weighting function - m _V special convolution product weighting function associated with a unit cell - n _i i=1, 2 integers used to locate the position of particles - n unit normal vector pointing from the-phase toward the-phase - r _p position vector locating the centroid of a particle, m - r gaussian probability distribution used to determine the size of a particle, m - r ₀ characteristic length of an averaging region, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume,V, m³ - x position of the centroid of an averaging area, m - x ₀ reference position of the centroid of an averaging area, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters V /V, volume average porosity - _{a i} standard deviation ofa _i - _r standard deviation ofr - intrinsic phase average of      

Boundary layer stability on a rotating disk with corotation of the surrounding fluid

The stability of the steady self-similar flow in the boundary layer on a rotating disk of infinite radius with corotation of the surrounding fluid is analyzed by the normal mode method. The spectral problem for infinitesimal three-dimensional disturbances is solved by a collocation method with expansion of the amplitude functions in Chebyshev polynomials. It is established that for all values of the parameter 0, equal to the ratio of the angular velocities of the fluid and the disk, the lower critical Reynolds number is determined byA-type, waves, whose development is governed by the parallel instability mechanism typical of an Ekman layer. TheB-type instability, associated with the presence of an inflection point on the velocity profile, disappears when 4. The neutral surfaces are calculated for Karman flow (=0) and Bödewadt flow (). It is found that in Karman flowA-type waves may grow at values of the Reynolds number several times smaller than the critical Reynolds number for spiral vortices. The results of the analysis are compared with the available experimental data.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.5, pp. 69–77, September–October, 1992.     

Mixed convection on vertical plate for fluids of any prandtl number

A mixed convection parameter=(Ra) ^1/4/(Re)^1/2, with=Pr/(1+Pr) and=Pr/(1 +Pr)^1/2, is proposed to replace the conventional Richardson number, Gr/Re², for combined forced and free convection flow on an isothermal vertical plate. This parameter can readily be reduced to the controlling parameters for the relative importance of the forced and the free convection,Ra ^1/4/(Re ^1/2 Pr ^1/3) forPr 1, and (RaPr)^1/2/(RePr ^1/2 forPr 1. Furthermore, new coordinates and dependent variables are properly defined in terms of, so that the transformed nonsimilar boundary-layer equations give numerical solutions that are uniformly valid over the entire range of mixed convection intensity from forced convection limit to free convection limit for fluids of any Prandtl number from 0.001 to 10,000. The effects of mixed convection intensity and the Prandtl number on the velocity profiles, the temperature profiles, the wall friction, and the heat transfer rate are illustrated for both cases of buoyancy assisting and opposing flow conditions.

---

Mischkonvektion an einer vertikalen Platte für Fluide beliebiger Prandtl-Zahl

Zusammenfassung Für die kombinierte Zwangs- und freie Konvektion an einer isothermen senkrechten Platte wird ein Mischkonvektions-Parameter=( Ra) ^1/4 (Re)^1/2, mit=Pr/(1 +Pr) und=Pr/(1 +Pr)^1/2 vorgeschlagen, den die gebräuchliche Richardson-Zahl, Gr/Re², ersetzen soll. Dieser Parameter kann ohne weiteres auf die maßgebenden Kennzahlen für den relativen Einfluß der erzwungenen und der freien Konvektion reduziert werden,Ra ^1/4/(Re ^1/2 Pr ^1/3) fürPr 1 und (RaPr)^1/4/(RePr)^1/2 fürPr 1. Weiterhin werden neue Koordinaten und abhängige Variablen als Funktion von definiert, so daß für die transformierten Grenzschichtgleichungen numerische Lösungen erstellt werden können, die über den gesamten Bereich der Mischkonvektion, von der freien Konvektion bis zur Zwangskonvektion, für Fluide jeglicher Prandtl-Zahl von 0.001 bis 10.000 gleichmäßig gültig sind. Der Einfluß der Intensität der Mischkonvektion und der Prandtl-Zahl auf die Geschwindigkeitsprofile, die Temperaturprofile, die Wandreibung und den Wärmeübergangskoeffizienten werden für die beiden Fälle der Strömung in und entgegengesetzt zur Schwerkraftrichtung dargestellt.

---

Nomenclature C _f local friction coefficient - C _p specific heat capacity - f reduced stream function - g gravitational acceleration - Gr local Grashoff number,g T _w –T )x³/v² - Nu local Nusselt number - Pr Prandtl number,v/ - Ra local Rayleigh number,g T _w –T x ³/( v) - Re local Reynolds number,u x/v - Ri Richardson number,Gr/Re ² - T fluid temperature - T _w wall temperature - T free stream temperature - u velocity component in thex direction - u free stream velocity - v velocity component in they direction - x vertical coordinate measuring from the leading edge - y horizontal coordinate Greek symbols thermal diffusivity - thermal expansion coefficient - mixed convection parameter (Ra)1/4/Re)^1/2 - pseudo-similarity variable,(y/x) - ₀ conventional similarity variable,(y/x)Re ^1/2 - dimensionless temperature, (T–T T _W –T - unified mixed-flow parameter, [(Re) ^1/2 + (Ra)^1/4] - dynamic viscosity - kinematic viscosity - stretched streamwise coordinate or mixed convection parameter, [1 + (Re)^1/2/(Ra) ^1/4]^–1=/(1 +) - density - Pr/(1 + Pr) _w wall shear stress - stream function - Pr/(l+Pr)^1/3 This research was supported by a grand from the National Science Council of ROC     

The extension of Beltrami's ellipsoid to anisotropic bodies

Summary The spectral decomposition of the compliance, stiffness, and failure tensors for transversely isotropic materials was studied and their characteristic values were calculated using the components of these fourth-rank tensors in a Cartesian frame defining the principal material directions. The spectrally decomposed compliance and stiffness or failure tensors for a transversely isotropic body (fiber-reinforced composite), and the eigenvalues derived from them define in a simple and efficient way the respective elastic eigenstates of the loading of the material. It has been shown that, for the general orthotropic or transversely isotropic body, these eigenstates consist of two double components, ₁ and ₂ which are shears (₂ being a simple shear and ₁, a superposition of simple and pure shears), and that they are associated with distortional components of energy. The remaining two eigenstates, with stress components ₃, and ₄, are the orthogonal supplements to the shear subspace of ₁ and ₂ and consist of an equilateral stress in the plane of isotropy, on which is superimposed a prescribed tension or compression along the symmetry axis of the material. The relationship between these superimposed loading modes is governed by another eigenquantity, the eigenangle .The spectral type of decomposition of the elastic stiffness or compliance tensors in elementary fourth-rank tensors thus serves as a means for the energy-orthogonal decomposition of the energy function. The advantage of this type of decomposition is that the elementary idempotent tensors to which the fourth-rank tensors are decomposed have the interesting property of defining energy-orthogonal stress states. That is, the stress-idempotent tensors are mutually orthogonal and at the same time collinear with their respective strain tensors, and therefore correspond to energy-orthogonal stress states, which are therefore independent of each other. Since the failure tensor is the limiting case for the respective _x, which are eigenstates of the compliance tensor S, this tensor also possesses the same remarkable property.An interesting geometric interpretation arises for the energy-orthogonal stress states if we consider the projections of _x in the principal₃D stress space. Then, the characteristic state ₂ vanishes, whereas stress states ₁, ₃ and ₄ are represented by three mutually orthogonal vectors, oriented as follows: The ₃ and ₄ lie on the principal diagonal plane (₃₁₂) with subtending angles equaling (–/2) and (-), respectively. On the positive principal ₃-axis, is the eigenangle of the orthotropic material, whereas the ₁-vector is normal to the (₃₁₂)-plane and lies on the deviatoric -plane. Vector ₂ is equal to zero.It was additionally conclusively proved that the four eigenvalues of the compliance, stiffness, and failure tensors for a transversely isotropic body, together with value of the eigenangle , constitute the five necessary and simplest parameters with which invariantly to describe either the elastic or the failure behavior of the body. The expressions for the _x-vector thus established represent an ellipsoid centered at the origin of the Cartesian frame, whose principal axes are the directions of the ₁-, ₃- and ₄-vectors. This ellipsoid is a generalization of the Beltrami ellipsoid for isotropic materials.Furthermore, in combination with extensive experimental evidence, this theory indicates that the eigenangle alone monoparametrically characterizes the degree of anisotropy for each transversely isotropic material. Thus, while the angle for isotropic materials is always equal to _i = 125.26° and constitutes a minimum, the angle || progressively increases within the interval 90–180° as the anisotropy of the material is increased. The anisotropy of the various materials, exemplified by their ratiosE _L/2G_L of the longitudinal elastic modulus to the double of the longitudinal shear modulus, increases rapidly tending asymptotically to very high values as the angle approaches its limits of 90 or 180°.     

Über den Einfluß von Querkrümmung und Dichte bei inhomogenen turbulenten Freistrahlen

Zusammenfassung Zur Berechnung turbulenter Strömungen wird das k--Modell im Ansatz für die turbulente Scheinzähigkeit erweitert, so daß es den Querkrümmungs- und Dichteeinfluß auf den turbulenten Transportaustausch erfaßt. Die dabei zu bestimmenden Konstanten werden derart festgelegt, daß die bestmögliche Übereinstimmung zwischen Berechnung und Messung erzielt wird. Die numerische Integration der Grenzschichtgleichungen erfolgt unter Verwendung einer Transformation mit dem Differenzenverfahren vom Hermiteschen Typ. Das erweiterte Modell wird auf rotationssymmetrische Freistrahlen veränderlicher Dichte angewendet und zeigt Übereinstimmung zwischen Rechnung und Experiment.

---

On the influence of transvers-curvature and density in inhomogeneous turbulent free jets

The prediction of turbulent flows based on the k- model is extended to include the influence of transverse-curvature and density on the turbulent transport mechanisms. The empirical constants involved are adjusted such that the best agreement between predictions and experimental results is obtained. Using a transformation the boundary layer equations are solved numerically by means of a finite difference method of Hermitian type. The extended model is applied to predict the axisymmetric jet with variable density. The results of the calculations are in agreement with measurements.

---

Bezeichnungen Wirbelabsorptionskoeffizient - c_i Massenkonzentration der Komponente i - c_D, c_L, c, c₁, c₂ Konstanten des Turbulenzmodells - d Düsendurchmesser - E bezogene Dissipationsrate - f bezogene Stromfunktion - f Korrekturfunktion für die turbulente Scheinzähigkeit - j turbulenter Diffusionsstrom - k Turbulenzenergie - k_i Schrittweite in -Richtung - K dimensionslose Turbulenzenergie - L turbulentes Längenmaß - M_i Molmasse der Komponente i - p Druck - allgemeine Gaskonstante - r Querkoordinate - r_0,5 Halbwertsbreite der Geschwindigkeit - r_0,5c Halbwertsbreite der Konzentration - T Temperatur - u Geschwindigkeitskomponente in x-Richtung - v Geschwindigkeitskomponente in r-Richtung - x Längskoordinate - y allgemeine Funktion - Y_i diskreter Wert der Funktion y - Relaxationsfaktor für Iteration - turbulente Dissipationsrate - transformierte r-Koordinate - kinematische Zähigkeit - Exponent - transformierte x-Koordinate - Dichte - _k, Konstanten des Turbulenzmodells - Schubspannung - allgemeine Variable - Stromfunktion - Turbulente Transportgröße Indizes 0 Strahlanfang - m auf der Achse - r mit Berücksichtigung der Krümmung - t turbulent - mit Berücksichtigung der Dichte - im Unendlichen - Schwankungswert oder Ableitung einer Funktion - – Mittelwert Herrn Professor Dr.-Ing. R. Günther zum 70. Geburtstag gewidmet     

New trends in the analysis of masonry structures

The modern theory of masonry structures has been set up on the hypothesis of no-tension behaviour, with the aim of offering a reference model, independent of materials and building techniques employed. This hypothesis gives rise to inequalities which have to be satisfied by the stress tensor components and, as a dual aspect, to the kinematic behaviour characteristics of media which can be classified as lying between solids and fluids: the structure of the masonry material consists of particles reacting elastically only when in contact. An examination of the plane-stress problem leads us to define, within the prescribed domain under admissible loads, three different subdomains with null, regular, or non-regular principal stress tensors, respectively. As the boundaries of such subdomains are not known a priori, the problem can be classified as a free boundary value problem. The analysis concerns mainly the subdomains where the stress tensor is non-regular; and a non-regularity condition det =0 is added to the equilibrium equations. This condition makes the stress problem isostatic and leads to a violation of Saint-Venant's compliance conditions on strains. Hence there is a need to introduce a strain tensor, not related to the stress tensor, which can be decomposed into an extensional component and a shearing component; we prove that such strains, of the class ^c, are similar to those of the theory of plastic flow. From the point of view of computational analysis the anelastic strains are considered as given distortions; they are computed by means of the Haar-Kármán principle, modified for computational purposes by an idea of Prager and Hodge.

---

Sommario La moderna teoria delle strutture murarie, fondata sulla rigorosa non reagenza a trazione del materiale, ha lo scopo di fornire un modello di riferimento indipendente sia dalle caratteristiche del materiale sia dalle techniche costruttive impiegate. L'ipotesi di non reagenza a trazione si traduce in disuguaglianze che le componenti del tensore di stress devono verificare; dualmente il comportamento caratteristico cinematico può esser classificato di confine, come del resto la stessa statica, tra solidi e fluidi: la struttura ipotizzata del materiale muratura consiste di particelle che reagiscono solo se sono in contatto. L'esame del problema piano porta a definire all'interno del dominio di definizione tre differenti tipi di sub-regioni in cui lo stress è nullo, canonico, o singolare. Poiché le frontiere di queste sub-regioni non sono note a priori il problema può anche essere classificato di frontiera libera. L'analisi concerne fondamentalmente la sub-regione in cui il tensore è non regolare, perché deve verificare anche la condizione det =0. Ciò rende isostatico il problema e conduce anche alla violazione della condizione di integrabilità delle deformazioni. Questo passaggio può essere superato introducendo un tensore di deformazioni a tensioni nulle che si può decomporre in una componente estensionale ed in una componente di scorrimento; si dimostra che queste deformazioni sono equivalenti a quelle che intervengono nella Teoria del flusso plastico. Dal punto di vista computazionale le deformazioni anelastiche sono considerate come distorsioni impresse determinate attraverso il principio di Haar-Kármán modificato, per le techniche computazionali, su idee di Prager e Hodge.

     

Propagation of a spherical wave in nonlinearly compressible and elastoplastic materials

The problem of spherical wave propagation in soil under the action of an intense uniformly decreasing load ₀(t) applied to the boundary of a cavity with radius r₀ is considered. Soil with a high stress level is modeled either by ideally nonlinearly compressible or elastoplastic material, taking account of linear irreversible unloading for the material. In contrast to [1–7], in order to describe material movement use is made of strain theory [8] with determining functions = (), _i=_i(_i), where , _i, , _i are the first and second invariants of strain and stress tensors. During material loading these functions are presented in the form of polynomials ()=(_i+₂¦¦), _ii)=(_i-_2i)_i, in which constant coefficients _i, _i=1, 2) are determined by experiment, taking account of the triaxial stressed state of soil. Solution of the problem is constructed by an analytically reversible method, with prescribed shape for the shock-wave (SW) surface in the form of a second-degree polynomial relating to time t and a numerical method of characteristics for a prescribed arbitrarily decreasing load _i(t). On the basis of the analytical equations obtained, calculations are carried out for material parameters (including loading profile) in a computer and stresses and mass velocity of plastic and elastoplastic materials are compared.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 95–100, July–August, 1986.The authors express their sincere thanks to Kh. A. Rakhmatulin for discussing the results of this work.     

Analytical evaluation of stress-strain test data

An analytical model for deducing the actual stress-strain properties from laboratory test results is discussed. As an illustration, an elastic bilinear material is used for unconfined cylindrical compression test conditions, as simulated with a finite element analysis. The results obtained are applicable for assisting in evaluating measured strength and stiffness properties of some clay soils, concrete test cylinders, concrete cores, and rock cores.The quantitative results of this study can be used for interpreting measured stress-strain data for unconfined compression test conditions. The error in measured results is shown to be influenced by Poisson's ratio, length-to-diameter ratio of the specimen, end condition, and ratio of inelastic modulus to initial elastic modulus. Curves for adjusting the measured results to the theoretical results are presented.Nomenclature D specimen diameter - E _i initial elastic stiffness modulus - E _y elastic stiffness modulus beyond the yield stress, plastic or inelastic modulus - L specimen length - axial strain - _av average strain - _g gage length strain - _y yield strain - Poisson's ratio - compressive stress - _av average stress - _t theoretical compressive stress - _y yield stress - _ym measured stress at the yield strain     

Free convection heat transfer from an isothermal plate with arbitrary inclination

This paper presents a new formulation for the laminar free convection from an arbitrarily inclined isothermal plate to fluids of any Prandtl number between 0.001 and infinity. A novel inclination parameter is proposed such that all cases of the horizontal, inclined and vertical plates can be described by a single set of transformed equations. Moreover, the self-similar equations for the limiting cases of the horizontal and vertical plates are recovered from the transformed equations by setting=0 and=1, respectively. Heated upward-facing plates with positive and negative inclination angles are investigated. A very accurate correlation equation of the local Nusselt number is developed for arbitrary inclination angle and for 0.001 Pr .

---

Wärmeübertragung bei freier Konvektion an einer isothermen Platte mit beliebiger Neigung

Zusammenfasssung Diese Untersuchung stellt eine neue Formulierung der laminaren freien Konvektion von Flüssigkeiten mit einer Prandtl-Zahl zwischen 0,001 und unendlich an einer beliebig schräggestellten isothermen Platte dar. Ein neuer Neigungsparameter wird eingeführt, so daß alle Fälle der horizontalen, geneigten oder vertikalen Platte von einem einzigen Satz transformierter Gleichungen beschrieben werden können. Die unabhängigen Gleichungen für die beiden Fälle der horizontalen and vertikalen Platte wurden für=0 und=1 aus den transformierten Gleichungen wieder abgeleitet. Es wurden erwärmte aufwärtsgerichtete Platten mit positiven und negativen Neigungswinkeln untersucht. Eine sehr genaue Gleichung wurde für die lokale Nusselt-Zahl bei beliebigen Neigungswinkeln und für 0,001 Pr entwickelt.

---

Nomenclature C _p specific heat - f reduced stream function - g gravitational acceleration - Gr local Grashof number,g(T _w –T _w ) x³/v² - h local heat transfer coefficient - k thermal conductivity - n constant exponent - Nu local Nusselt number,hx/k - p pressure - Pr Prandtl number, v/ - Ra local Rayleigh number,g(T _w –T )J x³/v - T fluid temperature - T _w wall temperature - T temperature of ambient fluid - u velocity component in x-direction - v velocity component in y-direction - x coordinate parallel to the plate - y coordinate normal to the plate Greek symbols thermal diffusivity - thermal expansion coefficient - (Ra¦sin¦)^1/4/( Ra cos()^1/5 - pseudo-similarity variable, (y/) - dimensionless temperature, (T–T )/(T _w–T ) - ( Ra cos)^1/5+(Rasin)^1/4 - v kinematic viscosity - 1/[1 +(Ra cos)^1/5/( Ra¦sin)^1/4] - density of fluid - Pr/(1+Pr) - _w wall shear stress - angle of plate inclination measured from the horizontal - stream function - dimensionless dynamic pressure     

Flow in porous media III: Deformable media

Stokes flow in a deformable medium is considered in terms of an isotropic, linearly elastic solid matrix. The analysis is restricted to steady forms of the momentum equations and small deformation of the solid phase. Darcy's law can be used to determine the motion of the fluid phase; however, the determination of the Darcy's law permeability tensor represents part of the closure problem in which the position of the fluid-solid interface must be determined.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - E Young's modulus for the-phase, N/m² - e i unit base vectors (i = 1, 2, 3) - g gravity vector, m²/s - H height of elastic, porous bed, m - k unit base vector (=e ₃) - characteristic length scale for the-phase, m - L characteristic length scale for volume-averaged quantities, m - n unit normal vector pointing from the-phase toward the-phase (n = -n ) - p pressure in the-phase, N/m² - P p – g·r, N/m² - r ₀ radius of the averaging volume, m - r position vector, m - t time, s - T total stress tensor in the-phase, N/m² - T ⁰ hydrostatic stress tensor for the-phase, N/m² - u displacement vector for the-phase, m - V averaging volume, m₃ - V volume of the-phase contained within the averaging volume, m³ - v velocity vector for the-phase, m/s Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - shear coefficient of viscosity for the-phase, Nt/m² - first Lamé coefficient for the-phase, N/m² - second Lamé coefficient for the-phase, N/m² - bulk coefficient of viscosity for the-phase, Nt/m² - T –T ⁰ , a deviatoric stress tensor for the-phase, N/m²     

Low power laser Rayleigh probe for flow mixing studies

A laser Rayleigh correlation probe was constructed, which allows the application of low cost, low power (milliwatt) laser sources. It was tested for basic mixing studies in isothermal binary gas flows. Here, it can be used for the time and space resolved measurement of the concentration mean value and of all important statistical quantities, which give information on the distribution around the concentration mean value (rms, skewness, kurtosis) and on the relation of adjecent fluctuations in time or space (autocorrelation function, power spectral density).List of symbols c concentration (mole fraction) of investigated gas species - c time averagered mean concentration - c instantaneous fluctuating concentration - rms concentration - D Rayleigh intensity difference of two gas species (I _R1–I _R2) - d width of the rectangular channels (x-direction), see Fig. 3 - f frequency - G() Rayleigh autocorrelation function (ACF) - I ₀ intensity of irradiated laser light - I _Ri intensity of Rayleigh signal of gas species i - K, k calibration constant of Rayleigh probe - l lenght of observed scattering volume - n(t) temporally fluctuating number density of gas molecules - R() normalized ACF - S Rayleigh intensity of gas components 2 in a binary mixture (I _R2) - T gas temperature - t time - u exit velocity - skewness of the concentration distribution around the mean value - kurtosis of the concentration distribution around the mean value - (d/d)_eff effective scattering cross section of the binary gas mixture - solid angle of collection optics - delay time - sample time     

Periodic axisymmetrical laminar flow of second-order liquids in cylindrical pipes of circular cross section

Summary After a few basic remarks, equations of unsteady slow of second-order incompressible fluids are given for the axifymmetrical case. The solution is worked out to give the expression of velocity and discharge, when the hydraulic slope represents any periodic function of time; the average energy dissipated in a period is also calculated. Particularly, when the hydraulic slope reduces to the expression a sin t+b cos t only, the dependence of pressure on r is also given, and it is recognized and emphasized that some components of the stress tensor oscillate with a frequency which is twice the frequency of motion.

---

Sommario Dopo brevi richiami, si scrivono le equazioni del moto vario per un fluido incomprimibile del secondo ordine, nel caso di simmetria assiale. Viene trovata la soluzione, esprimendo la velocità e la portata, nel caso in cui la pendenza motrice sia una qualsiasi funzione periodica del tempo; si calcola anche l'energia dissipata mediamente in un periodo. Nel caso particolare in cui la pendenza motrice si riduca all'espressione a sin t+b cos t, si dà la dipendenza della pressione da r, riconoscendo e mettendo in evidenza che alcune componenti del tensore degli sforzi oscillano con frequenza doppia rispetto a quella del moto.

     

Reservoir transport equations by compositional approach

The objective of this paper is to present an overview of the fundamental equations governing transport phenomena in compressible reservoirs. A general mathematical model is presented for important thermo-mechanical processes operative in a reservoir. Such a formulation includes equations governing multiphase fluid (gas-water-hydrocarbon) flow, energy transport, and reservoir skeleton deformation. The model allows phase changes due to gas solubility. Furthermore, Terzaghi's concept of effective stress and stress-strain relations are incorporated into the general model. The functional relations among various model parameters which cause the nonlinearity of the system of equations are explained within the context of reservoir engineering principles. Simplified equations and appropriate boundary conditions have also been presented for various cases. It has been demonstrated that various well-known equations such as Jacob, Terzaghi, Buckley-Leverett, Richards, solute transport, black-oil, and Biot equations are simplifications of the compositional model.Notation List B reservoir thickness - B formation volume factor of phase - Cⁱ mass of component i dissolved per total volume of solution - C ⁱ mass fraction of component i in phase - C heat capacity of phase at constant volume - C_p heat capacity of phase at constant pressure - D ⁱ hydrodynamic dispersion coefficient of component i in phase - D_MTf thermal liquid diffusivity for fluid f - F = F(x, y, z, t) defines the boundary surface - f_p fractional flow of phase - g gravitational acceleration - H_p enthalpy per unit mass of phase - J_p volumetric flux of phase - k_rf relative permeability to fluid f - k₀ absolute permeability of the medium - M_p ⁱ mass of component i in phase - n porosity - N rate of accretion - P_f pressure in fluid f - p_ca capillary pressure between phases and =p-p - Rⁱ rate of mass transfer of component i from phase to phase - Rⁱ _source source rate of component i within phase - S saturation of phase - s gas solubility - T temperature - t time - U displacement vector - u velocity in the x-direction - v velocity in the y-direction - V volume of phase - V_s velocity of soil solids - W_i body force in coordinate direction i - x horizontal coordinate - z vertical coordinate Greek Letters _p volumetric coefficient of compressibility - _T volumetric coefficient of thermal expansion - _ij Kronecker delta - volumetric strain - _m thermal conductivity of the whole matrix - internal energy per unit mass of phase - gf suction head - density of phase - _ij tensor of total stresses - _ij tensor of effective stresses - volumetric content of phase - f viscosity of fluid f     

Das Dispersionsmodell

Zusammenfassung Ein Vergleich im Frequenzbereich zeigt, daß bei der Berechnung der Verweilzeitverteilung mit dem Dispersionsmodell das endlich begrenzte System für Péclet-Zahlen Pe > 10 mit guter Näherung durch ein einseitig unbegrenztes System und für Pe > 50 durch ein beidseitig unbegrenztes System ersetzt werden kann.

---

The dispersion model. A comparison of approximations

A comparison in the frequency domain shows that for the determination of the residence time distribution with the dispersion model the finitely restricted system may be substituted with good approximation for Peclet numbers Pe > 10 by a one-side unrestricted system and for Pe > 50 by a both-side unrestricted system.

---

Bezeichnungen A Rohrquerschnitt - A=A mittlerer Strömungsquerschnitt in der Schüttschicht - Konzentration (Partialdichte) der Bezugskomponente i - Bezugskonzentration nach Gl. (5) - c_i Konzentration (Dichte) der reinen Bezugskomponente i - D axialer Dispersionskoeffizient - E Fehler im Frequenzbereich nach Gl. (36) - G(,) Übertragungsfunktion - G(,i) Frequenzgang - L Länge der Schüttschicht - m Masse - Massenstrom - Péclet-Zahl - s Laplace-Variable - t Zeit - t Impulsbreite - v Strömungsgeschwindigkeit im leeren Rohr - mittlere axiale Strömungsgeschwin digkeit in der Schüttschicht - V=AL Zwischenraumvolumen der Schüttschicht - x Ortskoordinate - (t) Dirac-Stoss - Porosität - dimensionslose Zeit - dimensionslose Konzentration - Laplace-Transformierte der Konzentration - Fourier-Transformierte der Konzentration - dimensionslose Ortskoordinate - =s dimensionslose Laplace-Variable - mittlere Verweilzeit - Kreisfrequenz - = dimensionslose Kreisfrequenz Indices A Ausgang - D Dispersion - E Eingang - i Bezugskomponente - K Konvektion Mitteilung Nr. 44 des Institutes für Mess-und Regel-technik der Eidgenössischen Technischen Hochschule Zürich (Vorsteher: Prof. Dr. P. Profos)     

On an analogue of the Euler-Cauchy polygon method for the numerical solution of ux y = f(x,y, u,ux, uy)

This paper develops, with an eye on the numerical applications, an analogue of the classical Euler-Cauchy polygon method (which is used in the solution of the ordinary differential equation dy/dx=f(x, y), y(x ₀)=y ₀) for the solution of the following characteristic boundary value problem for a hyperbolic partial differential equation u _xy =f(x, y, u, u _x , y _y ), u(x, y ₀)=(x), u(x ₀, y)=(y), where (x ₀)=(y ₀). The method presented here, which may be roughly described as a process of bilinear interpolation, has the advantage over previously proposed methods that only the tabulated values of the given functions (x) and (y) are required for its numerical application. Particular attention is devoted to the proof that a certain sequence of approximating functions, constructed in a specified way, actually converges to a solution of the boundary value problem under consideration. Known existence theorems are thus proved by a process which can actually be employed in numerical computation.

---

     

Electric and thermal conductivity anisotropy of an articulated medium

It is well known that articulation may cause the electric and thermal conducting properties of a medium to become anisotropic. Extensive experimental data relating to the conductivity of rock were presented in [1], and according to these data the ambient resistance in the case of an orderly arrangement of cracks noticeably depends on the direction along which it is measured; an ellipsoid of resistance anisotropy can be constructed from the measurement results. A pronounced correlation between the orientations of the resistivity extrema and the orientation of the crack system is observed here. A comparison betwen the direction rose of the fractures and the direction rose of the articulation carried out for different regions has shown that they are identical. A crack density tensor T describing the average (with respect to a given volume) geometry of the articulation has been introduced [2, 3]. In the current work, it is proved that T can be effectively used in problems involving anisotropic electrical and thermal conductivity. The resistivity tensor and thermal-conductivity coefficient tensor K, which characterize the anisotropy of the electrical and thermal conducting properties, are expressed in terms of t. The structure of this relation is established; the equations presented allow us to find the form of and K if the articulation parameters are known.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 141–144, January–February, 1976.