Electrochemical and photosensitized redox reactions of a prussian blue film layered on a WO3/[Ru(bpy)3]2+/polymer hybrid film.

A hybrid film of WO(3)/tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)(3)](2+))/poly(sodium 4-styrenesulfonate) (PSS) (denoted as a WRP hybrid film) was prepared as a base layer on an indium tin oxide electrode substrate by cathodic electrodeposition from a colloidal ternary solution containing peroxotungstic acid, [Ru(bpy)(3)](2+), and PSS. Prussian blue, Fe(III) (4)[Fe(II)(CN)(6)](3) (Fe(II)-Fe(III)) was cathodically electrodeposited on the WRP hybrid film from a Berlin brown (Fe(III)-Fe(III)) colloidal solution to give a WRP/Fe(II)-Fe(III) bilayer film. Spectrocyclic voltammetry measurement of the WRP/Fe(II)-Fe(III) bilayer film reveals that Prussian white (Fe(II)-Fe(II)) is oxidized to Fe(II)-Fe(III) by electrogenerated Ru(III), and Fe(II)-Fe(III) is re-reduced to Fe(II)-Fe(II) by electrogenerated H(x)WO(3). Visible-light irradiation of the WRP hybrid film generates a small photocurrent (approximately 8 nA cm(-2)) at 0.4 V of an applied potential, whereas irradiation of the WRP/Fe(II)-Fe(II) bilayer film (Fe(II)-Fe(III) is electrochemically reduced to the Fe(II)-Fe(II) state) significantly generates a steady photoanodic current of 2.0-1.1 microA cm(-2) under the same conditions, thus demonstrating that the photoanodic current is produced by the layered Fe(II)-Fe(II) film. The photoaction spectrum of the bilayer film reveals that the photoanodic current is based on the photoexcitation of [Ru(bpy)(3)](2+). The photogeneration of Fe(II)-Fe(III) from Fe(II)-Fe(II) is shown by the absorption spectral change of the bilayer film on irradiation. These results corroborate the notion that Fe(II)-Fe(II) is oxidized by photogenerated Ru(III) to generate Fe(II)-Fe(III). However, the rate of photogeneration of Fe(II)-Fe(III) is slow, which could be ascribed to the fast back electron transfer (ET) from WO(3) to Ru(III), comparable with the forward ET from Fe(II)-Fe(II) to Ru(III). The fast back ET could be a crucial problem for the [Ru(bpy)(3)](2+)-sensitized reaction in the hybrid film.     

Electrochromic hysteresis performance of a prussian blue film arising from electron-transfer control by a tris(2,2'-bipyridine)ruthenium(II)-doped WO(3) film as studied by a spectrocyclic voltammetry technique

A [Ru(bpy)(3)](2+) (bpy=2,2'-bipyridine)-doped WO(3) film was prepared as a base layer on a substrate by cathodic electrodeposition from a colloidal triad solution containing peroxotungstic acid (PTA), [Ru(bpy)(3)](2+), and poly(sodium 4-styrenesulfonate) (PSS). A Prussian blue (PB; Fe(II)-Fe(III)) film was cathodically electrodeposited on the [Ru(bpy)(3)](2+)-doped WO(3) film or neat WO(3) film from an aqueous Berlin brown (BB; Fe(III)-Fe(III)) colloid solution to yield a [Ru(bpy)(3)](2+)-doped WO(3)/PB bilayer film or WO(3)/PB bilayer film. For the spectrocyclic voltammogram (SCV) of the WO(3)/PB film, a redox response of Prussian white (PW; Fe(II)-Fe(II))/PB was observed at 0.11 V, however, further oxidation of PB to BB was not allowed by the interfacial n-type Schottky barrier between the WO(3) and PB layers. For the [Ru(bpy)(3)](2+)-doped WO(3)/PB film, any electrochemical response assigned to the redox of PB was not observed in the cyclic voltammogram, however, the in situ absorption spectral change recorded simultaneously showed the significant redox reactions based on PB. The SCV revealed that PW on the [Ru(bpy)(3)](2+)-doped WO(3) film is completely oxidized to PB by a geared reaction of Ru(II)/Ru(III) at 1.05 V, and that 32 % of PB formed is further oxidized to BB by the same geared reaction in the potential scan to 1.5 V. PB was completely re-reduced to PW by a geared reaction of H(x)WO(3)/WO(3) at -0.5 V in the reductive potential scan. These geared electrochemical reactions produced an electrochromic hysteresis performance of the PB film layered on the [Ru(bpy)(3)](2+)-doped WO(3) film.     

Organic Redox Probes for the Key Oxidation States in Mixed Valence Ruthenium Oxide/Cyanometallate (Ruthenium Prussian Blue Analogue) Catalysts

The electrochemical redox behavior of the polynuclear mixed valence ruthenium oxide cyanometallate complexes (mvRuOx? MCN, M=Fe, Cr, Ni, Cu, Ru and Pt) have been systematically studied in this report by using three redox sensitive organic probes of glucose, ethanol and formaldehyde. The results were interpreted by the well‐established ruthenium oxide and Prussian blue chemistry. The mvRuOx? MCN, under the category of Ru‐based Prussian blue analogue, was found to possess superior electrocatalytic activity than either ruthenium oxide or Prussian blue in acidic mediums. The electrogenerated oxy/hydroxy‐Ru^VII state (at +1.1 V vs. Ag/AgCl) was unusually stabilized in the mvRuOx? MCN matrix without any disproportion reaction in acidic environments. In contrast to those of earlier studies, possible structure in terms of the ? Ru^III/II? NC? M? and ? Ru^III/II? O? Ru^VII/VI? sites was proposed here. Enzyme‐less analytical detection of glucose in acidic conditions was first time demonstrated with sensitivity comparable to that of ruthenium oxide‐based electrodes in alkaline solutions.     

Chemical and Photochemical Water Oxidation Catalyzed by Mononuclear Ruthenium Complexes with a Negatively Charged Tridentate Ligand

Two mononuclear ruthenium complexes [RuL(pic)₃] ( 1 ) and [RuL(bpy)(pic)] ( 2 ) (H₂L=2,6‐pyridinedicarboxylic acid, pic=4‐picoline, bpy=2,2′‐bipyridine) have been synthesized and fully characterized. Both complexes could promote water oxidation chemically and photochemically. Compared with other known ruthenium‐based water oxidation catalysts using [Ce(NH₄)₂(NO₃)₆] (Ce^IV) as the oxidant in solution at pH 1.0, complex 1 is one of the most active catalysts yet reported with an initial rate of 0.23 turnover s^?1. Under acidic conditions, the equatorial 4‐picoline in complex 1 dissociates first. In addition, ligand exchange in 1 occurs when the Ru^III state is reached. Based on the above observations and MS measurements of the intermediates during water oxidation by 1 using Ce^IV as oxidant, [RuL(pic)₂(H₂O)]⁺ is proposed as the real water oxidation catalyst.     

Structural studies on ruthenium(II) complexes used in interphase catalysis for the hydrogenation of ketones

Structural studies were performed on catalytically active ruthenium(II) complexes used in interphases, by means of XAFS spectroscopy. The EXAFS investigations indicate that the complexes retain their structural integrity when they are embedded on polysiloxane matrices to form stationary phase materials. The AXAFS studies reveal that the variations in the catalytic activity of the complexes with different ligands can be correlated to the differences in the electronic structure around the active ruthenium center. The EXAFS investigations show that, in asymmetric transfer hydrogenation reactions catalysed by ruthenium(II) complexes, the co‐catalyst plays a crucial role not only in enhancing the catalytic activity, but also in determining the structure of the intermediate species. Copyright © 2007 John Wiley & Sons, Ltd.     

Electrochemical analysis of the coordination sphere of ruthenium(ii) as electron transfer mediator in glucose oxidase catalysis in aqueous solutions

The redox potentials of the cis-[Ru(LL)₂XY]ⁿ⁺ complexes (LL = 2,2"-bipyridyl (bpy), 1,10-phenanthroline (phen), and 4,4"-dimethyl-2,2"-bipyridyl (Me₂bpy); X, Y = Cl^–, Br^–, CO₃ ^2–, NO₂ ^–, SCN^–, N₃ ^–, H₂O, and DMSO) in aqueous buffer solutions were measured and analyzed in the framework of the Lever theory on the additivity of contributions of ligands (E _L) to the apparent redox potential of the complex (E ^o"). The complexes manifest the properties of reversible or quasireversible redox systems, whose formal redox potentials lie in the 0.2—0.5 V range. The complexes are efficient electron transfer mediators between the active center of glucose oxidase (GO) from Aspergillus niger and an electrode.     

Bridging nanogap electrodes by in situ electropolymerization of a bis(terthiophenylphenanthroline)ruthenium complex

A novel complex containing a 3,8-bis[terthiophenyl-(1,10-phenanthroline)] ligand coordinated to [Ru(bpy)(2)] was synthesized and characterized by electrochemical and spectroscopic techniques. The complex was shown to be a suitable starting material for the electrodeposition of functionalized molecular wires between nanogap electrodes to generate stable molecular nanodevices. Temperature-dependent nonlinear I-V curves were obtained at 80-300 K. The material can also be deposited on indium tin oxide (ITO) to form compact electrochromic films at surface concentrations lower than approximately 1 x 10(-8) mol cm(2); however, a more loosely bond fibrous form is preferentially deposited at higher surface concentrations.     

Amperometric biosensors based on the immobilization of oxidases in a Prussian blue film by electrochemical codeposition

Prussian blue has been formed by cyclic voltammetry onto the basal pyrolytic graphite surface to prepare a chemically modified electrode which provides excellent electrocatalysis for both oxidation and reduction of hydrogen peroxide. It is found for the first time that glucose oxidase or -amino oxidase can be incorporated into a Prussian blue film during its electrochemical growth process. Two amperometric biosensors were fabricated by electrochemical codeposition, and the resulting sensors were protected by coverage with a thin film of Nafion. The influence of various experimental conditions was examined for optimum analytical performance. The glucose sensor responds rapidly to substrates with a detection limit of 2 × 10⁻⁶ M and a linear concentration range of 0.01–3 mM. There was no interference from 2 mM ascorbic acid or uric acid. Another ( -amino acid) sensor gave a detection limit of 3 × 10⁻⁵ M -alanine, injected with a linear concentration range of 7.0 × 10⁻⁵-1.4 × 10⁻² M. Glucose and -amino acid sensors remain relatively stable for 20 and 15 days, respectively. There is no obvious interference from anion electroactive species due to a low operating potential and excellent permselectivity of Nafion.     

Prussian Blue‐Derived Iron Phosphide Nanoparticles in a Porous Graphene Aerogel as Efficient Electrocatalyst for Hydrogen Evolution Reaction

Tailoring of new hydrogen evolution reaction (HER) electrocatalyst with earth abundant elements is important for large scale water splitting and hydrogen production. In this work, we present a simple synthetic method for incorporating iron phosphide (FeP) particles into three‐dimensional (3D) porous graphene aerogel (GA) structure. The FeP formed in porous 3D GA (FeP/GA) is derived from electroactive Fe hexacyanoferrate (FeHCF). The advantage of incorporating FeP, in the porous 3D graphene network enables high accessibility for HER. As synthesized FeP/GA catalyst shows good electrocatalytic activity for HER in both acidic and alkaline solutions. The developed method can be useful for synthesizing metal hexacyanoferrate derived mono/bimetal phosphide catalyst in porous 3D graphene aerogels.     

Application and Mechanistic Studies of a Water‐Oxidation Catalyst in Alcohol Oxidation by Employing Oxygen‐Transfer Reagents

By using a dimeric ruthenium complex in combination with tert‐butyl hydrogen peroxide (TBHP) as stoichiometric oxidant, a mild and efficient protocol for the oxidation of secondary benzylic alcohols was obtained, thereby giving the corresponding ketones in high yields within 4 h. However, in the oxidation of aliphatic alcohols, the TBHP protocol suffered from low conversions owing to a competing Ru‐catalyzed disproportionation of the oxidant. Gratifyingly, by switching to Oxone (2 KHSO₅ ? KHSO₄ ? K₂SO₄ triple salt) as stoichiometric oxidant, a more efficient and robust system was obtained that allowed for the oxidation of a wide range of aliphatic and benzylic secondary alcohols, giving the corresponding ketones in excellent yields. The mechanism for these reactions is believed to involve a high‐valent Ru^V–oxo species. We provide support for such an intermediate by means of mechanistic studies.