来源于类芽孢杆菌属碱性甲壳素酶的分离纯化及其性质（英文）

甲壳素,又名几丁质(chitin),是自然界中含量仅次于纤维素的第二大天然多糖,有第六生命要素之美称.其主要存在于甲壳类动物的外壳、真菌细胞的细胞壁以及一些昆虫的外壳中,每年自然界中约有100多亿吨甲壳素生成.甲壳素是由2-乙酰氨基-2-脱氧-D-吡喃葡萄糖和2-氨基-2-脱氧-D-吡喃葡萄糖通过β-1,4糖苷键连接而成的二元线性聚合物,分子链中分布许多羟基、氨基及乙酰氨基,形成大量分子间及分子内氢键,致使其结晶度较高,化学性质十分稳定,直接利用较为困难.甲壳素不溶于稀酸、稀碱以及一般有机溶剂,工业上常用强酸强碱法处理甲壳素,以制备壳寡糖类产品,但该方法具有产品结构不单一,环境污染较为严重等缺点.甲壳素酶可特异性水解甲壳素链中β-1,4糖苷键,得到甲壳寡糖和乙酰氨基葡萄糖.酶解法降解甲壳素工艺简单、反应条件温和、环境友好,有很好的应用前景.我们以Paenibacillus pasadenensis CS0611为出发菌株,以蟹壳粉末为培养基唯一碳源及氮源,在适宜条件下培养48h.发酵液经离心、硫酸铵(80%饱和度)盐析、透析除盐后得到粗酶液.再利用HiTrap DEAE FF离子交换层析和HiLoad 26/600Superdex 200pg凝胶过滤层析对该粗酶液进行分离纯化,以得到电泳纯甲壳素酶.所制备甲壳素酶比活力为10.28U/mg,最终纯化倍数为5.3,酶活得率为15.7%.SDS-PAGE结果表明,该甲壳素酶相对分子质量约为69 kDa.后经MALDI-TOF-MS鉴定,该酶部分肽段和来源于另一株Paenibacillus pasadenenss的甲壳素酶(accession No:gi655151624)具有较高的同源性,进一步证实所纯化蛋白为甲壳素酶.对上述纯化的甲壳素酶的酶学性质进行研究,结果发现:其最适反应温度为50℃,在20-35℃内有较好的稳定性,50℃及以上热稳定性较差;最适pH为5.0,在pH4.0-11.0间具有较高稳定性,表明该酶具有很好的耐碱性;金属离子对该酶催化活性没有明显的激活作用,表明该甲壳素酶是非金属酶.同时,对该酶的底物特异性进行研究,发现该酶对胶体甲壳素和甲壳素水解能力较强,对淀粉和纤维素无水解能力,对不同脱乙酰度的壳聚糖的水解程度随脱乙酰度不同而变化,表明该酶只能特异性识别并降解GlcNAc-GlcNAc之间的糖苷键;以胶体甲壳素为底物时,米氏常数K_m为4.41 mg/mL,最大反应初速度为1.08 mg/min.利用薄板层析和高效液相色谱对酶解产物进行分析,结果表明该甲壳素酶对胶体甲壳素的降解产物主要是(G1cNAc)_2.综上所述,本研究所涉甲壳素酶在甲壳二糖的酶法制备方面具有较好的应用前景.     

用于固定抗体的新型温敏性核—壳结构聚合物微球的合成及其初步应用研究

利用无皂乳液聚合和种子聚合的方法合成了一种以聚苯乙烯为核,聚(N-异丙基丙烯酰胺-co-N-丙烯酸琥珀酰亚胺酯)为壳的单分散的核-壳结构的聚合物微球.用扫描电镜和透射电镜观察了球的形貌特征,发现微球具有清晰的核-壳结构和较好的单分散性,红外光谱显示了在1738cm-1处有酯羰基的特征吸收峰.动态光散射测定发现该聚合物微球具有温敏性,当温度高于聚N-异丙基丙烯酰胺的最低临界溶液温度(LCST)时,球的流体力学直径变小.利用微球壳层所含有的琥珀酰亚胺酯基与伯氨基的高反应活性,将抗体Rabbit IgG化学固定在球的壳层上.由于壳层的聚N-异丙基丙烯酰胺具有温敏性,反应温度不同结合的抗体的量也不同,在0℃和36.5℃,微球对抗体的结合率分别为61.6%和38.6%.     

来源于类芽孢杆菌属碱性甲壳素酶的分离纯化及其性质

甲壳素,又名几丁质(chitin),是自然界中含量仅次于纤维素的第二大天然多糖,有第六生命要素之美称.其主要存在于甲壳类动物的外壳、真菌细胞的细胞壁以及一些昆虫的外壳中,每年自然界中约有100多亿吨甲壳素生成.甲壳素是由2-乙酰氨基-2-脱氧-D-吡喃葡萄糖和2-氨基-2-脱氧-D-吡喃葡萄糖通过β-1,4糖苷键连接而成的二元线性聚合物,分子链中分布许多羟基、氨基及乙酰氨基,形成大量分子间及分子内氢键,致使其结晶度较高,化学性质十分稳定,直接利用较为困难.甲壳素不溶于稀酸、稀碱以及一般有机溶剂,工业上常用强酸强碱法处理甲壳素,以制备壳寡糖类产品,但该方法具有产品结构不单一,环境污染较为严重等缺点.甲壳素酶可特异性水解甲壳素链中β-1,4糖苷键,得到甲壳寡糖和N-乙酰氨基葡萄糖.酶解法降解甲壳素工艺简单、反应条件温和、环境友好,有很好的应用前景.我们以Paenibacillus pasadenensis CS0611为出发菌株,以蟹壳粉末为培养基唯一碳源及氮源,在适宜条件下培养48 h.发酵液经离心、硫酸铵(80％饱和度)盐析、透析除盐后得到粗酶液.再利用HiTrap DEAE FF离子交换层析和HiLoad 26/600Superdex 200 pg凝胶过滤层析对该粗酶液进行分离纯化,以得到电泳纯甲壳素酶.所制备甲壳素酶比活力为10.28 U/mg,最终纯化倍数为5.3,酶活得率为15.7％.SDS-PAGE结果表明,该甲壳素酶相对分子质量约为69 kDa.后经MALDI-TOF-MS鉴定,该酶部分肽段和来源于另一株Paenibacillus pasadenenss的甲壳素酶(accession No:gi655151624)具有较高的同源性,进一步证实所纯化蛋白为甲壳素酶.对上述纯化的甲壳素酶的酶学性质进行研究,结果发现:其最适反应温度为50℃,在20-35℃内有较好的稳定性,50℃及以上热稳定性较差;最适pH为5.0,在pH4.0-11.0间具有较高稳定性,表明该酶具有很好的耐碱性;金属离子对该酶催化活性没有明显的激活作用,表明该甲壳素酶是非金属酶.同时,对该酶的底物特异性进行研究,发现该酶对胶体甲壳素和甲壳素水解能力较强,对淀粉和纤维素无水解能力,对不同脱乙酰度的壳聚糖的水解程度随脱乙酰度不同而变化,表明该酶只能特异性识别并降解GlcNAc-GlcNAc之间的糖苷键;以胶体甲壳素为底物时,米氏常数Km为4.41 mg/mL,最大反应初速度为1.08 mg/min.利用薄板层析和高效液相色谱对酶解产物进行分析,结果表明该甲壳素酶对胶体甲壳素的降解产物主要是(GlcNAc)2.综上所述,本研究所涉甲壳素酶在甲壳二糖的酶法制备方面具有较好的应用前景.     

聚丙烯中二苄叉山梨醇类透明剂含量的红外光谱法测定

建立了用傅立叶红外光谱仪快速检测聚丙烯中二苄叉山梨醇类透明剂含量的方法.二苄叉山梨醇类透明剂都含有相似的缩醛结构,在波数约1 100 cm-41处有较强的红外吸收.以对氯二苄叉山梨醇(CDBS)为例,选取1 092 cm-1处的最大吸收峰为分析对象,利用吸光度积分面积法进行了定量分析.由得到的标准曲线可知,透明剂的含量与其特征峰的吸收强度有很好的线性关系,相关系数达0.998以上.     

红外光谱法对六氟磷酸锂的快速定量分析

本文建立了一种用傅里叶红外光谱(FT-IR)法快速定量分析LiPF6的方法。采用红外光谱(IR)法和X射线衍射(XRD)法对LiPF6样品进行了定性分析。选取LiPF6红外光谱847cm-1处的特征吸收峰为分析对象,利用吸光度峰面积积分法进行定量分析,由标准曲线可知,LiPF6的含量与其红外光谱特征峰的吸收强度有很好的线性关系,相关系数达0.9998,线性范围在0.04～25mg.mL-1,检出限可达0.02mg.mL-1。LiPF6样品定量测定的相对标准偏差(RSD)约为0.18%,回收率为96%～98%。     

傅里叶变换红外吸收光谱识别五种植物油的研究

以花生油、大豆油、芝麻油、棉籽油和米糠油为样品,采用傅里叶变换红外光谱仪,采集傅里叶变换红外吸收光谱,对光谱预处理后,提取红外特征信息,以1746cm-1和2855cm-1处的吸收峰面积比值为横坐标,1099cm-1处与1119cm-1处的吸收峰面积比为纵坐标,在Origin6.0上做出二维分布图,对各种油脂进行识别分析。结果显示,大豆油与其它4种油脂之间有明显区分;大豆油、花生油和芝麻油分布效果好,但棉籽油各样品点之间比较分散;能与其它油脂区分开的有以下几种分布花生油明显区别于芝麻油、棉籽油和大豆油;米糠油明显区别于棉籽油和大豆油。分布有交叉的油脂有米糠油与花生油或芝麻油有交叉,棉籽油与芝麻油有交叉。     

更低温度下和重复再生时NiO/SiO2催化剂上甲苯完全氧化反应

采用原子层沉积法将NiO沉积到粒径约为100 mm、平均孔径为14 nm的中孔SiO2颗粒的壳层(壳层厚度11 nm)区域,并分别在450和600°C进行热处理。将制得的这两种Ni/SiO2样品用于催化甲苯分子吸附及其氧化为CO2的反应中。结果发现,在450°C热处理的样品在甲苯吸附及其随后氧化为CO2的反应中表现出更高的活性;当将该样品暴露在160°C甲苯蒸气中,然后加热到450°C时,排放出CO2,而几乎没有甲苯脱附出来。这表明该催化剂可用于在200°C以下操作的、用于消除建筑物内有味气体的设备中,且该催化剂可以在450°C下经过热处理得到再生。     

电化学发光法检测鲎素

基于鲎素(TCP)能强烈抑制钌联吡啶/N,N-二丁基乙醇胺(Ru(bpy)32+/DBAE)体系的电化学发光(ECL)信号,建立了检测鲎素的方法。在最优实验条件下,Ru(bpy)32+/DBAE体系的ECL淬灭值△IECL与TCP质量浓度的对数logρ呈良好的线性关系,线性范围为3.0×10-10~1.5×10-8g/mL,检出限达50 pg/mL(S/N=3)。方法用于鲎试剂样品分析,鲎素的加标回收率为93.0%~107.6%。     

蚕蛹甲壳素的脱色方法与机理探讨

研究了从粗甲壳素 (分离蚕蛹蛋白质后的残渣 )中提取蚕蛹甲壳素的工艺条件 ,探索了H2 O2 氧化脱色方法。实验结果表明 ,在 70℃的水浴中 ,按照m(蚕蛹渣 )∶m(5 %氢氧化钠 ) =30∶80的质量比处理 2h ,可脱净残余蛋白 ,得到黑褐色的粗蚕蛹甲壳素。用H2 O2 脱色漂白 ,工艺条件为 :6 5～ 70℃ ,pH值为 8 5± 0 5 ,时间 5h ,m (蚕蛹渣 )∶m(30 %H2 O2 ) =5 0∶130。所得甲壳素白度为 30 % ,收率为 2 5 %。双氧水脱除蚕蛹甲壳素颜色的机理可能是H2 O2 分解的O2 -2 作用于铁硫蛋白与细胞色素复合物体系中的硫 ,将体系中半胱氨酸硫氧化成亚砜 ,使得色蛋白与甲壳素相连的键断开 ,从而使色素从甲壳素上分离下来。     

CdS／聚电解质核-壳式复合微球的光谱特性研究

合成了CdS/聚电解质核-壳式复合微球并研究了其红外光谱、拉曼光谱和真空紫外光谱.在复合微球的红外光谱中出现的619.1 cm-1 Cd-S伸缩振动峰,与固态CdS相比出现了明显的蓝移现象.拉曼光谱中,与CdS特征纵光学声子模(1LO)相对应的299.4 cm-1也发生了蓝移现象.常温(290 K)和低温(20 K)下的真空紫外光谱存在差异.对于激发光谱,常温下主峰在269 nm,并有一些副峰,而低温下仅在253 nm处有1个明显的激发峰;常温下的发光峰在382 nm,并且有322、542和585 nm的副峰,而低温下则在394 nm处有明显的发光峰.这些结果说明CdS和聚电解质之间形成了包裹关系,并且具有很好的光学性能,可以作为荧光量子点标记材料.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。