Voltamperometric determination of kinetin with a carbon paste modified electrode

The electrochemical behaviour of kinetin (6-furfurylaminopurine) on a carbon paste modified with OV-17 silicone electrode, is studied. The determination of kinetin is possible working in square wave voltammetric techniques, reaching limits of determination of 38.7 ng ml⁻¹. The proposed method was successfully applied to determine the cytokinin in extracts of apples (previously spiked with kinetin) and the obtained results were in accordance with the results obtained with HPLC-UV.     

Study of the electrochemical behaviour of a carbon steel electrode in sodium sulfate aqueous solutions using electrochemical impedance spectroscopy

The study of a plain carbon steel (AISI 1020) in Na₂SO₄ aqueous solutions at different concentrations was carried out by electrochemical impedance spectroscopy (EIS) in order to determine the corrosion mechanism and to obtain representative corrosion rates of the system. EIS was used to measure corrosion current densities at high concentrations in the range 0.1–1 wt% Na₂SO₄, but in the low concentration range, from 0.001 to 0.01 wt%, a scattered Nyquist plot was obtained. Other electrochemical techniques, such as polarization resistance (PR), Tafel plots and electrochemical noise (EN), were also used in this analysis. The charge transfer resistance was determined and compared with the PR and noise resistance. Electronic Publication     

依诺沙星在碳糊电极上的阳极吸附伏安法研究

在0.40 mol/L的NaAc-HAc(pH 4.5)缓冲液中,使用JP-303极谱分析仪,依诺沙星在碳糊电极(CPE)上有一灵敏的吸附伏安氧化峰,峰电位为1.17 V(vs.SCE).该氧化峰的二阶导数峰电流与依诺沙星的浓度在4.0×10-9～4.0×10-7 mol/L(富集90 s)范围内呈良好的线性关系,相关系数为0.995,检出限为2.0×10-9 mol/L(S/N=3,富集110 s).探讨了依诺沙星在碳糊电极上的伏安性质和电极反应机理,并且用于诺佳胶囊中依诺沙星的测定.     

Elaboration of carbon paste electrode containing pentadentate Nickel-(II) Schiff base complex: Application to electrochemical oxidation of thiosulfate in alkaline medium

A Nickel Schiff base complex, insoluble in water, was synthesized and used as modifier. A Nickel Schiff base modified carbon paste electrode MCPE was build. The electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-Ray spectroscopy (EDXS), cyclic voltammetry and chronoamperometry. The modifier is elctroactive, a well defined redox couple of Ni^III/Ni^II in alkaline medium was made in evidence. It presents a quasi-reversible system with electron transfer coefficient (0.38) and electron transfer rate of 4.5 s⁻¹. The electrogenerated Ni^III species on the surface of the electrode act as an excellent catalyst toward thiosulfate oxidation reaction with a chemical rate constant K_h equal to 23,6 M⁻¹s⁻¹. The different techniques involved in this study qualify our modified electrode as sensitive, reliable and very stable for thiosulfate analysis.     

碳糊电极阳极吸附伏安法测定洛美沙星

报道了碳糊电极阳极吸附伏安法测定洛美沙星的新方法。在0.096mol L的KHP NaOH(pH5.4)缓冲液中,用碳糊电极为工作电极,在0.3V(vs.SCE)富集一定时间,然后从0.3～1 3V以300mV s扫速线性扫描,记录其在1 02V的二次导数阳极溶出峰。溶出峰电流与洛美沙星浓度在8.0×10-9～8.0×10-8mol L(富集90s)和8.0×10-8～8.0×10-7mol L(富集30s)范围内呈良好的线性关系,相关系数分别为0.9844和0.9967,检出限为9.0×10-10mol L(S N=3)。探讨了洛美沙星在碳糊电极上的伏安性质和电极反应机理,并且成功地应用于人体尿液中洛美沙星的测定,结果与紫外光度法基本吻合。     

靛玉红在碳糊电极上的阴极吸附伏安法研究

在0.10 mol/L的K2HPO4-NaH2PO4（pH8.5）缓冲液中,使用JP-303极谱分析仪,靛玉红在碳糊电极（CPE）上有一灵敏的吸附伏安还原峰,峰电位为-0.60 V（vs.SCE）。该还原峰的二阶导数峰电流与靛玉红的浓度在8.0×10^-9-8.0×10^-7mol/L（富集90 s）范围内呈良好的线性关系,相关系数为0.9976,检出限为4.0×10^-9mol/L（S/N=3,富集110 s）。探讨了靛玉红在碳糊电极上的伏安性质和电极反应机理,并应用于中草药大青叶中靛玉红含量的测定。     

Preparation and characterization of a new carbon paste electrode based on ketotifen–hexacyanoferrate

A new type of carbon paste electrode (CPE) was made using ketotifen fumarate (C₂₃H₂₃NO₅S; an antiasthmatic/antianaphylactic drug) and hexacyanoferrate. This electrode was constructed using an acidic solution of ketotifen fumarate and potassium hexacyanoferrate. For this purpose, ketotifen fumarate was dissolved in acidic solution (pH 1) and hexacyanoferrate was added by agitation, resulting in ketotifen–hexacyanoferrate (Ket–HCF) precipitate. The obtained precipitate was separated and introduced into carbon paste. The electrochemical behavior of Ket–HCF CPE was studied by cyclic voltammetry. A modified electrode shows one pair of peaks with surface-confined characteristics, with a 0.1-M phosphate buffer as supporting electrolyte. The effects of pH, alkali metal cations, and anions of supporting electrolytes on the electrochemical characteristics of modified electrodes were studied. The diffusion coefficients of hydrated K⁺ in film (D), the transfer coefficient (α), and the transfer rate constant for electrons (k _s) were determined.     

Interaction of the mutagen ethidium bromide with DNA, using a carbon paste electrode and a hanging mercury drop electrode

The interaction of ethidium bromide (2,7-diamino-10-ethyl-9-phenylphenanthridinium bromide; EB) with double stranded (ds) calf thymus DNA and thermally denatured single stranded (ss) DNA was studied in solution and at the electrode surface by means of transfer voltammetry using a carbon paste electrode (CPE) as working electrode in 0.2 M acetate buffer, pH 5.0. As a result of intercalation of this dye between the base pairs of dsDNA, the characteristic peak of dsDNA, due to the oxidation of guanine residues, decreased and after a particular concentration of EB a new peak at +0.81 V appeared, probably due to the formation of a complex between dsDNA and EB. The non-intercalated EB gives another peak, but at an increased concentration of the dye. A similar behaviour was observed during the interaction of the dye with ssDNA.Furthermore, the interaction of EB with ds, ss and supercoiled (sc) DNA was studied at the hanging mercury drop electrode (HMDE) surface by means of alternating current voltammetry in 0.3 M NaCl and 50 mM sodium phosphate buffer (pH 8.5) as supporting electrolyte. dsDNA yields a smaller peak at −1.42 V (peak III) compared to the one yielded by ssDNA, since the latter is a relaxed and more accessible form. By addition of EB into the buffer solution an increase of peak III was observed in the dsDNA form as well as in ssDNA resulting from their interaction with EB. Furthermore, the appearance of peak III in covalently closed circular scDNA after exposure to increasing concentrations of EB is a result of the introduction of ‘free ends’ in DNA affecting its structural integrity.     

Characterization of a carbon paste electrode modified with tripolyphosphate-modified kaolinite clay for the detection of lead

We report about the use of carbon paste electrode modified with kaolinite for analytical detection of trace lead(II) in domestic water by differential pulse voltammetry. Kaolinite clay was modified with tripolyphosphate (TPP) by impregnation method. The results show that TPP in kaolinite clay plays an important role in the accumulation process of Pb(II) on the modified electrode surface. The electroanalytical procedure for determination of Pb(II) comprised two steps: chemical accumulation of the analyte under open-circuit conditions, followed by electrochemical detection of the pre-concentrated species using differential pulse voltammetry. The analytical performance of this system has been explored by studying the effects of preconcentration time, carbon paste composition, pH, supporting electrolyte concentration, as well as interferences due to other ions. The calculated detection limit based on the variability of a blank solution (3s_b criterion) for 10 measurements was 8.4 × 10⁻⁸ mol L⁻¹, and the sensitivity determined from the slope of the calibration graph was 0.910 mol L⁻¹. The reproducibility (RSD) for five replicate measurements at 1.0 mg L⁻¹ lead level was 1.6%. The results indicate that this electrode is sensitive and effective for the determination of Pb²⁺.     

贮氢电极电化学阻抗谱及其数学模型

从分析贮氢电极的放电过程着手，建立了具有明显物理意义贮氢电极电化学阻抗谱的数学模型，以该数学模型为基础，讨论了与电极材料性质和电极荷电状态相联系的一些参数。     

An ionic liquid-type carbon paste electrode for electrochemical investigation and determination of calcium dobesilate

An ionic liquid-type carbon paste electrode (IL-CPE) had been fabricated by replacing non-conductive organic binders with a conductive room temperature ionic liquid, 1-pentyl-3-methylimidazolium hexafluorophosphate (PMIMPF₆). The electrochemical responses of calcium dobesilate were investigated at the IL-CPE and the traditional carbon paste electrode (T-CPE) in 0.05 mol L⁻¹ H₂SO₄, respectively. The results showed the superiority of IL-CPE to T-CPE in terms of provision of higher sensitivity, faster electron transfer and better reversibility. A novel method for determination of calcium dobesilate was proposed. The oxidation peak current was rectilinear with calcium dobesilate concentration in the range of 8.0 × 10⁻⁷ to 1.0 × 10⁻⁴ mol L⁻¹, with a detection limit of 4.0 × 10⁻⁷ mol L⁻¹(S/N = 3) by differential pulse voltammetry. The proposed method was applied to directly determine calcium dobesilate in capsule and urine samples.     

修饰的多壁碳纳米管糊电极用于生物与制药样品中苄丙酮香豆素电催化氧化和测定

采用一种简单灵敏的方法开发了在多壁碳纳米管修饰的ZnCrFeO4糊电极(MWCNTs/ZnCrFeO4/CPE)表面测定苄丙酮香豆素的新型传感器.运用循环伏安法、差示脉冲伏安法、计时电流法和电化学阻抗谱考察了该化学修饰电极上苄丙酮香豆素的电化学性能.结果表明,MWCNTs/ZnCrFeO4/CPE电极对苄丙酮香豆素氧化表现出较高的电催化活性,在pH=4时,产生峰值氧化电流约0.97 vs Ag/AgCl参比电极.当苄丙酮香豆素浓度在0.02-920.0 μmol/L范围内,该峰电流与其呈线性关系,检测极限(3σ)为0.003 μmol/L.另外,运用差示脉冲伏安法测定了MWCNTs/ZnCrFeO/CPE电极上苄丙酮香豆素的催化反应速率常数和扩散系数.     

Electrocatalytic determination of L-cysteine using a modified carbon nanotube paste electrode:Application to the analysis of some real samples

The electrooxidation of L-cysteine(L-Cys) was studied using a benzoylferrocene(BF) modified multi-wall carbon nanotube paste electrode(BFCNPE) using cyclic voltammetry(CV),square wave voltammetry(SWV) and chronoamperometry(CHA).Under optimum pH in CV the oxidation of L-Cys occurs at a potential about 215 mV less positive than that at the surface of unmodified carbon paste electrode.The catalytic oxidation peak currents were dependent on the L-Cys concentration and a linear calibration curve was obtained in the range 0.7-350.0 mmol/L of L-Cys with SWV method.The detection limit(3s) was determined as 0.1 mmol/L.This method was also used for the determination of L-Cys in some real samples.     

Voltammetric determination of ethinylestradiol at a carbon paste electrode in the presence of cetyl pyridine bromine

Electrochemical behaviors of ethinylestradiol at a carbon paste electrode (CPE) in the presence of cetyl pyridine bromide (CPB) are investigated by electrochemical techniques. Compared with that at a CPE without CPB, the oxidation peak potential of ethinylestradiol shifts negatively and the peak current is increased significantly, due to the enhanced accumulation of ethinylestradiol via electrostatic interaction with CPB at the hydrophobic electrode surface. It is verified by the influences of different kinds of surfactants on the electrochemical signals of ethinylestradiol. Some parameters such as pH, scan rate, accumulation potential and accumulation time on the oxidation of ethinylestradiol are optimized. Under optimal conditions, the oxidation peak current is proportional to ethinylestradiol concentration in the range of 5.0 x 10(-8) to 2.0 x 10(-5) mol L(-1) with a detection limit of 3.0 x 10(-8) mol L(-1) for 150 s accumulation by linear sweep voltammetry (LSV). The proposed procedure is successfully applied to determine ethinylestradiol in pharmaceutical formulation (Levonorgestrel and Etinylestradiol tablets) and the results are satisfying compared with that of high-performance liquid chromatography (HPLC).     

Determination of linuron in water and vegetable samples using stripping voltammetry with a carbon paste electrode

A carbon paste electrode was used for the electrochemical determination of linuron concentrations in water and vegetable extracts. Optimal conditions were established with respect to electrode activation (electrochemical pretreatment), time accumulation, potential accumulation, scan rate, and pH. The limit of detection achieved with a pre-concentration step was 23.0 μg L⁻¹. Recovery measurements in vegetable extract and natural water samples were in the range of 98-103%, indicating that the proposed electrochemical method can be employed to analyze linuron in these matrices. The determination results were in good agreement with HPLC results.     

Determination of lead and cadmium using a polycyclodextrin-modified carbon paste electrode with anodic stripping voltammetry

This work reports the use of and -cyclodextrin-modified carbon paste electrodes (CPE_-CD and CPE_-CD) to determine simultaneously Pb(II) and Cd(II) by means of the electrochemical technique known as anodic stripping voltammetry (ASV). Both modified electrodes displayed good resolution of the oxidation peaks of the said metals. Statistic analysis of the results strongly suggests that the CPE_-CD exhibited a better analytical response that the CPE_-CD, while the detection limits obtained for Pb(II) were 6.3×10^–7 M for the CPE_-CD and 7.14×10^–7 M for the CPE_-CD, whereas for Cd(II) they were 2.51×10^–6 M for the CPE_-CD and 2.03×10^–6 M for the CPE_-CD.     

A sensitive determination of dopamine in the presence of ascorbic acid using a nafion-coated clinoptilolite-modified carbon paste electrode

A selective dopamine determination using a nafion-coated clinoptilolite-modified carbon paste electrode in the presence of ascorbic acid was studied. Both cyclic voltammetry (CV) and differential pulse anodic stripping voltammetry (DPASV) were used for measurements of dopamine. To improve the selectivity of the clinoptilolite-modified carbon paste electrode in presence of a high concentration of ascorbic acid, the electrode surface was coated with nafion membrane. Experimental parameters affecting the determination of dopamine, including the clinoptilolite ratio, nafion membrane thickness, preconcentration time, preconcentration solution pH, stripping solution pH and interferences are discussed. The developed sensor has a wide linear range, a low detection limit, and good stability and reproducibility. The sensor offers a good alternative to existing analytical methods for dopamine, permits a relatively short analysis time, and is simple, selective and inexpensive.     

Electrochemical oxidation of cisatracurium on carbon paste electrode and its analytical applications

The electrochemical oxidation of cisatracurium was investigated by cyclic voltammetry and differential pulse voltammetry at a carbon paste electrode and the experimental parameters have been optimized in order to obtain the optimum analytical signal. A differential pulse voltammetric method with carbon paste electrode is described for the determination of cisatracurium with detection limit of 0.38 μg/ml and quantitation limit of 1.26 μg/ml. The proposed method was applied to determine the content of cisatracurium in human urine and human serum, obtaining accurate and precise results.     

Viscosity and binder composition effects on tyrosinase-based carbon paste electrode for detection of phenol and catechol

The systematic study of the effect of binder viscosity on the sensitivity of a tyrosinase-based carbon paste electrode (CPE) biosensor for phenol and catechol is reported. Silicon oil binders with similar (polydimethylsiloxane) chemical composition were used to represent a wide range of viscosities (10–60 000 mPa s⁻¹ at 25°C) while minimizing polarity effects. The highest response for both phenol and catechol was achieved using a silicon oil binder of intermediate viscosity (100 mPa s⁻¹). The binder viscosity showed no appreciable effect on the direct oxidation of phenol and catechol using a plain CPE, suggesting the involvement of diffusion kinetics in the binder matrix for the enzyme-based CPE. The effect of the relative binder concentration in the carbon paste was measured over the range of 30–70%. Optimal results were obtained using 40% silicon oil. For comparison of the viscosity effects observed with the carbon paste electrode (CPE) containing silicon oil, other low and high viscosity mineral oils and paraffin waxes were also examined.     

Investigation of ion-selective electrodes with neutral ionophores and ionic sites by EIS. I. Theory

Models of an ion selective electrode involving an ionophore and mobile sites in a membrane are proposed. The first model, called the phase boundary potential model, supposed thermodynamic equilibrium; it allows the concentrations of the various species to be calculated. Then, a kinetic model, which takes into account the ionic transfer at the membrane|solution interfaces, was derived. The impedance of the membrane was calculated. It shows that a membrane with nernstian behavior shows only one capacitive loop in the impedance diagram, which is related to the conductivity and dielectric properties of the material of the membrane. Non-nernstian behavior is related to slow ionic transfer at the membrane|solution interfaces or/and transport limitation of the species in the membrane. Finite rate constants of the ionic transfer lead to a capacitive loop in the middle frequency range, whereas finite rate transport leads to a diffusional impedance in the low frequency range.