Renewable nanocomposite layer-by-layer assembled catalytic interfaces for biosensing applications

A novel, easily renewable nanocomposite interface based on layer-by-layer (LbL) assembled cationic/anionic layers of carbon nanotubes customized with biopolymers is reported. A simple approach is proposed to fabricate a nanoscale structure composed of alternating layers of oxidized multiwalled carbon nanotubes upon which is immobilized either the cationic enzyme organophosphorus hydrolase (OPH; MWNT-OPH) or the anionic DNA (MWNT-DNA). The presence of carbon nanotubes with large surface area, high aspect ratio and excellent conductivity provides reliable immobilization of enzyme at the interface and promotes better electron transfer rates. The oxidized MWNTs were characterized by thermogravimetric analysis and Raman spectroscopy. Fourier transform infrared spectroscopy showed the surface functionalization of the MWNTs and successful immobilization of OPH on the MWNTs. Scanning electron microscopy images revealed that MWNTs were shortened during sonication and that LbL of the MWNT/biopolymer conjugates resulted in a continuous surface with a layered structure. The catalytic activity of the biopolymer layers was characterized using absorption spectroscopy and electrochemical analysis. Experimental results show that this approach yields an easily fabricated catalytic multilayer with well-defined structures and properties for biosensing applications whose interface can be reactivated via a simple procedure. In addition, this approach results in a biosensor with excellent sensitivity, a reliable calibration profile, and stable electrochemical response.     

Enzyme-quantum dots architecture for highly sensitive electrochemiluminescence biosensing of oxidase substrates

A simple strategy for the fabrication of the first biosensor based on the intrinsic electrochemiluminescence of quantum dots coupled with an enzymatic reaction is proposed with glucose oxidase as a model, which could be applied in more bioanalytical systems for oxidase substrates.     

Electron donor solvent effects provide biosensing with quantum dots

A palmitate biosensor that uses the emission intensity of a semiconducting nanoparticle to report palmitate concentration is presented. This method uses electron transfer to quench the emission from a ZnS-coated CdSe nanoparticle. The fatty acid binding pocket of intestinal fatty acid binding protein is used to modulate the electron transfer properties of [Ru(L)(NH3)4](PF6)2 (L = 5-maleimido-1,10-phenanthroline) that is covalently attached within this pocket. Once the metal-complex-modified protein is attached to ZnS-coated CdSe nanoparticles, palmitate addition excludes water from around the metal complex and increases the electron transfer from the metal complex to the valence band hole of the nanoparticle excited state. A 1.6-fold change in emission intensity is observed upon adding a saturated amount (500 nM) of sodium palmitate. The dissociation constant was calculated as 5 nM with a 1 nM lower limit of detection. Since palmitate does not alter the global conformation of intestinal fatty acid binding protein, palmitate-mediated changes in pocket solvation are suggested. This represents a new method in biosensor construction with semiconducting nanoparticles. Including previous conformation-dependent biosensors, there are thousands of potential analytes that can be detected with these strategies. Such biosensors will provide fluorescence contrast imaging reagents for small molecule analytes.     

具有红色荧光性质的掺硒碳点在生物传感和抗菌中的多功能应用

以易得的苯亚硒酸(BA)和邻苯二胺(o-PDA)作为前体，通过一步水热法成功设计并合成了掺杂硒的碳点(Se-CDs)。制备的Se-CDs发出红色波段的荧光，并被用于开发一种检测microRNA-21(miR-21)的灵敏荧光传感器。通过脱氧核糖核酸酶Ⅰ(DNase Ⅰ)介导的信号放大方法，将miR-21的检测限从78 nmol·L^-1改进到了6.8 nmol·L^-1。此外，Se-CDs对大肠杆菌等革兰氏阴性菌具有理想的抑制活性。     

Carbon nanospheres enhanced electrochemiluminescence of CdS quantum dots for biosensing of hypoxanthine

This work developed a novel method to greatly enhance the electrochemiluminescence (ECL) of CdS quantum dots (QDs). The ECL amplification was achieved by the assembly of QDs on poly (diallyldimethylammonium chloride)-functionalized carbon nanospheres (PFCNSs), and successfully employed for sensitive ECL biosensing of oxidase substrates. The carbon nanospheres were prepared by a “green” method, and the high loading of QDs on carbon nanospheres led to a 4-times increased ECL intensity with dissolved O₂ as the coreactant. Using xanthine oxidase (XOD) as a model, an ECL biosensor was fabricated by immobilizing the enzyme on the mixing membrane of PFCNSs and QDs. The ECL biosensor showed a fast response to hypoxanthine with a linear concentration range from 2.5 × 10⁻⁸ to 1.4 × 10⁻⁵ M. The limit of detection was 5 nM at a signal-to-noise ratio of 3. The assay results of hypoxanthine in fish samples were in a good agreement with the reference values by amperometric technique. This facile approach to prepare the PFCNSs/QDs system for ECL biosensing could be of promising application in bioanalysis and electronic device.     

Signal amplification using functional nanomaterials for biosensing

Signal amplification based on biofunctional nanomaterials has recently attracted considerable attention due to the need for ultrasensitive bioassays and the trend towards miniaturized assays. The biofunctional nanomaterials can not only produce a synergic effect among catalytic activity, conductivity and biocompatibility to accelerate the signal transduction, but also provide amplified recognition events by high loading of signal tags, leading to a highly sensitive and specific biosensing. Most importantly, nanoscaled materials are in direct contact with the environment, which permits them to act as chemical and biological sensors in single-molecule detection of biomolecules. In this tutorial review, we will focus on recent significant advances in signal amplification strategies combining the cross-disciplines of chemistry, biology, and materials science, and highlight some elegant applications of biofunctional nanomaterials as excellent electronic or optical signal tags in ultrasensitive bioanalysis. The biofunctional nanomaterials-based biosensing opens a series of concepts for basic research and offers new tools for detection of trace amounts of a wide variety of analytes in clinical, environmental, and industrial applications.     

Visible light induced photoelectrochemical biosensing based on oxygen-sensitive quantum dots

A visible light induced photoelectrochemical biosensing platform based on oxygen-sensitive near-infrared quantum dots (NIR QDs) was developed for detection of glucose. The NIR QDs were synthesized in an aqueous solution, and characterized with scanning electron microscopy and X-ray photoelectron spectroscopy. The as-prepared NIR QDs were employed to construct oxygen-sensitive photoelectrochemical biosensor on a fluorine-doped tin oxide (FTO) electrode. The oxygen dependency of the photocurrent was investigated at as-prepared electrode, which demonstrated the signal of photocurrent is suppressed with the decreasing of oxygen. Coupling with the consumption of oxygen during enzymatic reaction, a photoelectrochemical strategy was proposed for the detection of substrate. Using glucose oxidase (GOx) as a model enzyme, that is, GOx was covalently attached to the surface of CdTe QDs, the resulting biosensor showed the sensitive response to glucose. Under the irradiation of visible light of a wavelength at 505 nm, the proposed photoelectrochemical method could detect glucose ranging from 0.1 mM to 11 mM with a detection limit of 0.04 mM. The photoelectrochemical biosensor showed a good performance with high upper detection limit, acceptable stability and accuracy, providing an alternative method for monitoring biomolecules and extending the application of near-infrared QDs.     

Electrochemical biosensing for dsDNA damage induced by PbSe quantum dots under UV irradiation

<正>An electrochemical sensor for the detection of the natural double-stranded DNA(dsDNA) damage induced by PbSe quantum dots(QDs) under UV irradiation was developed.The biosensing membranes were prepared by successively assembling 3- mercaptopropionic acid,polycationic poly(diallyldimethyl ammonium) and dsDNA on the surface of the gold electrode.Damage of dsDNA was fulfilled by immersing the sensing membrane electrode in PbSe QDs suspension and illuminating it with an UV lamp. Cyclic voltammetry was utilized to detect dsDNA damage with Co(phen)_3~(3+) as the electroactive probe.The UV irradiation,Pb~(2+) ions liberated from the PbSe QDs under the UV irradiation and the reactive oxygen species(ROS) generated in the presence of the PbSe QDs also under the UV irradiation were the three factors of inducing the dsDNA damage.The synergistic effect of the three factors might dramatically enhance the damage of dsDNA.This electrochemical sensor provided a simple method for detecting DNA damage,and may be used for investigating the DNA damage induced by other QDs.     

The coupling of localized surface plasmon resonance-based photoelectrochemistry and nanoparticle size effect: towards novel plasmonic photoelectrochemical biosensing

Visible light-activated localized surface plasmon resonance-based photoelectrochemical detection is reported for the first time.     

基于碳纳米管/钯纳米粒子复合材料的电化学传感平台

在碳纳米管存在下合成了直径2~10nm的钯纳米粒子,利用全氟磺酸盐聚合物Nafion溶解碳纳米管/钯纳米粒子复合物,构建了检测H2O2的电化学传感平台.循环伏安法证实所合成的钯纳米粒子在复合材料中保持了其电化学活性,该纳米复合物对H2O2具有催化能力.将葡萄糖氧化酶固定在碳纳米管/钯纳米粒子复合物修饰的玻碳电极上,制备...     

Reagentless pH-based biosensing using a fluorescently-labelled dextran co-entrapped with a hydrolytic enzyme in sol-gel derived nanocomposite films

We report on the development of reagentless fluorescence-based sensing films utilizing hydrolytic enzymes co-entrapped with polymers that are labelled with pH sensitive fluorophores. Aqueous solutions of a hydrophilic enzyme (urease) or a lipophilic enzyme (lipase) containing fluorescein or carboxy-seminaphtharhodafluor-1 (SNARF-1), either free or conjugated to a dextran polymer backbone, were mixed with hydrolyzed alkoxysilane solutions and cast onto planar surfaces to form thin, biologically active sol-gel derived films (ca. 500 nm thick). The films also contained various additives, such as methyltrimethoxysilane, dimethyldimethoxysilane, polyethylene glycol or polyvinyl alcohol, to optimize the activity of the entrapped enzymes. The photostability, leaching, pK_a and pH response of the entrapped probes were characterized, as was the performance of the entrapped enzymes, and an optimal set of processing conditions was obtained for each different sensing film. In general, the results indicated that SNARF-labelled dextran was the most useful pH sensitive dye owing to insensitivity to leaching and photobleaching. Furthermore, it was observed that the pK_a and pH response of this probe was insensitive to preparation conditions. The performance of the co-entrapped enzymes was highly dependent on the type and level of additive, but in all cases, it was possible to obtain active enzymes with good performance characteristics. Reagentless sensing films for urea and glyceryl tributyrate (GTB) are demonstrated based on the detection of enzyme-mediated pH changes from films coated onto planar substrates.     

ZnO/Cu nanocomposite: a platform for direct electrochemistry of enzymes and biosensing applications

Unique structured nanomaterials can facilitate the direct electron transfer between redox proteins and the electrodes. Here, in situ directed growth on an electrode of a ZnO/Cu nanocomposite was prepared by a simple corrosion approach, which enables robust mechanical adhesion and electrical contact between the nanostructured ZnO and the electrodes. This is great help to realize the direct electron transfer between the electrode surface and the redox protein. SEM images demonstrate that the morphology of the ZnO/Cu nanocomposite has a large specific surface area, which is favorable to immobilize the biomolecules and construct biosensors. Using glucose oxidase (GOx) as a model, this ZnO/Cu nanocomposite is employed for immobilization of GOx and the construction of the glucose biosensor. Direct electron transfer of GOx is achieved at ZnO/Cu nanocomposite with a high heterogeneous electron transfer rate constant of 0.67 ± 0.06 s(-1). Such ZnO/Cu nanocomposite provides a good matrix for direct electrochemistry of enzymes and mediator-free enzymatic biosensors.     

Exploiting multi-function Metal-Organic Framework nanocomposite Ag@Zn-TSA as highly efficient immobilization matrixes for sensitive electrochemical biosensing

A novel multi-function Metal-Organic Framework composite Ag@Zn-TSA (zinc thiosalicylate, Zn(C₇H₄O₂S), Zn-TSA) was synthesized as highly efficient immobilization matrixes of myoglobin (Mb)/glucose oxidase (GOx) for electrochemical biosensing. The electrochemical biosensors based on Ag@Zn-TSA composite and ionic liquid (IL) modified carbon paste electrode (CPE) were fabricated successfully. Furthermore, the properties of the sensors were discussed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and amperometric current-time curve, respectively. The results showed the proposed biosensors had wide linear response to hydrogen peroxide (H₂O₂) in the range of 0.3–20,000 μM, to nitrite (NO₂⁻) for 1.3 μM–1660 μM and 2262 μM–1,33,000 μM, to glucose for 2.0–1022 μM, with a low detection limit of 0.08 μM for H₂O₂, 0.5 μM for NO₂⁻, 0.8 μM for glucose. The values of the apparent heterogeneous electron transfer rate constant (k_s) for Mb and GOx were estimated as 2.05 s⁻¹ and 2.45 s⁻¹, respectively. Thus, Ag@Zn-TSA was a kind of ideal material as highly efficient immobilization matrixes for sensitive electrochemical biosensing. In addition, this work indicated that MOF nanocomposite had a great potential for constructing wide range of sensing interface.     

Carbon dots as building blocks for the construction of functional nanocomposite materials

Journal of the Iranian Chemical Society - Carbon dots (CDs) are carbon-based quasi-spherical fluorescent nanoparticles with unique physical and chemical properties. Due to their complexity and...     

Catalytic and peroxidase-like activity of carbon based-AuPd bimetallic nanocomposite produced using carbon dots as the reductant

In this report, carbon-based AuPd bimetallic nanocomposite (AuPd/C NC) was synthesized using carbon dots (C-dots) as the reducing agent and stabilizer by a simple green sequential reduction strategy, without adding other agents. The as synthesized AuPd/C NC showed good catalytic activity and peroxidase-like property. The structure and morphology of these nanoparticles were clearly characterized by UV–Vis spectroscopy, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The AuPd/C NC catalyst exhibits noticeably higher catalytic activity than Pd and Au nanoparticles in catalysis reduction of 4-nitrophenol (4-NP). Moreover, based on the high peroxidase-like property of AuPd/C NC, a new colorimetric detection method for hydrogen peroxide (H₂O₂) has been designed using 3,3′,5,5′-tetramethyl-benzidine (TMB) as the substrate, which provides a simple and sensitive means to detect H₂O₂ in wide linear range of 5 μM–500 μM and 500 μM–4 mM with low detection limit of 1.6 μM (S/N = 3). Therefore, the facile synthesis strategy for bimetallic nanoparticles by the mild reductant of carbon dot will provide some new thoughts for preparing of carbon-based metal nanomaterials and expand their application in catalysis and analytical chemistry areas.     

双量子点纳米复合物NO比率荧光探针的合成与应用

通过静电吸附作用,合成了CdSe@SiO_2-CdTe双量子点的纳米复合物.一氧化氮(NO)与CdTe量子点表面Cd离子结合形成Cd-NO复合物,引起CdTe量子点荧光猝灭,而不影响CdSe量子点的荧光.当NO浓度在0.1~2.2μmol/L之间变化时,该探针荧光强度比值I_(603)/I_(532)符合线性关系(R=-0.995 4),从而实现对NO的定量检测.     

Reagentless biosensing using electrochemical impedance spectroscopy.

The use of electrochemical impedance spectroscopy (EIS) and the conducting polymer, poly (pyrrole), as an integrated recognition and transduction system for reagentless biosensor systems was demonstrated with two different systems. The first system being an immunoassay for detection of luteinising hormone (LH) with the antibody being entrapped with in the poly (pyrrole) matrix and the second, a construct for DNA hybridisation discrimination able to differentiate single- and double-stranded DNA based on the interaction of the DNA with poly (pyrrole).     

A novel silica-coated multiwall carbon nanotube with CdTe quantum dots nanocomposite

A novel silica-coated multiwall carbon nanotube (MWNTs) with CdTe quantum dots nanocomposite was synthesized in this paper. Here, we show the in situ growth of crystalline CdTe quantum dots on the surfaces of oxidized MWNTs. The approach proposed herein differs from previous attempts to synthesize nanotube assemblies in that we mix the oxidized MWNTs into CdCl₂ solution of CdTe nanocrystals synthesized in aqueous solution. Reinforced the QD–MWNTs heterostructures with silica coating, this method is not invasive and does not introduce defects to the structure of carbon nanotubes (CNTs), and it ensures high stability in a range of organic solvents. Furthermore, a narrow SiO₂ layer on the MWNT–CdTe heterostructures can eliminate the biological toxicity of quantum dots and carbon nanotubes. This is not only a breakthrough in the synthesis of one-dimensional nanostructures, but also taking new elements into bio-nanotechnology.