Growth and vibrational properties of MnOx thin films on Rh(111)

The growth, structures, and vibrational properties of ultrathin manganese oxide films on Rh(111) had been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), low energy ion scattering spectroscopy (LEIS) and Auger electron spectroscopy (AES). MnO_x grew in a layer-by-layer fashion on the Rh(111) surface. HREELS phonon features and XPS binding energies showed that an OMnO like tri-layer formed initially. Which was stable on the Rh(111) surface with MnO_x coverage less than one monolayer. At above one monolayer, Mn₃O₄ was preferred as indicated from a four-phonon feature peaked at 13.3, 39, 68 and 83 meV in HREELS. Higher temperature oxidation and annealing were found to improve the long-range order of the MnO_x films.     

Nb 3d and O 1s core levels and chemical bonding in niobates

A set of available experimental data on binding energies of Nb 3d_5/2 and O 1s core levels in niobates has been observed with using energy difference (O 1sNb 3d_5/2) as a robust parameter for compound characterization. An empirical relationship between (O 1sNb 3d_5/2) values measured with XPS for Nb⁵⁺-niobates and mean chemical bond length L(NbO) has been discussed. A range of (O 1sNb 3d_5/2) values possible in Nb⁵⁺-niobates has been defined. An energy gap ∼1.4–1.8 eV is found between (O 1sNb 3d_5/2) values reasonable for Nb⁵⁺ and Nb⁴⁺ states in niobates.     

Extrinsic fluorescence as a sensitive method for studying photo-degradation of high density polyethylene part I

Artificial ageing of high density polyethylene (HDPE) exposed to ultra-violet irradiation has been investigated by fluorescence spectroscopy. In the case of HDPE, fluorescence spectroscopy requires the addition of fluorophore, (rhodamine 101 laser dye). The spectral features of fluorescence are very sensitive to the interaction between the exited molecules and the polymer matrix. Under wavelength close to 254 nm, the diffusion of oxygen can introduce groups such as CO, CO and C(O)O into the molecular chains. Thus entail structural and chemical modifications such as polymeric chain breaking, cross linking and oxidation. In the present work, we clearly illustrate the fact that fluorescence spectroscopy is very worthwhile in particular to follow the early stages of photo-degradation.     

Growth and ordering of CuO chains on Ag(110) surface

Growth of CuO chains and their ordering on Ag(110) surface were monitored by scanning tunneling microscopy (STM). When Cu atoms were deposited on a (2 × 1)AgO/Ag(110) surface at room temperature, the AgO chains in the [001] direction diminished and new strings of CuO grew along the [110] direction and yield a (2 × 2) p2mg ordering. When a Ag(110) surface with coexisting AgO and CuO chains was exposed to CO at room temperature, the AgO chains were selectively reduced.     

Magnetic susceptibility of liquid Na1−xSbxalloys

The magnetic susceptibility of liquid NaSb alloys was measured in a temperature range between 600°C and 1100°C. The NaSb system is supposed to exhibit, as does the CsSb system, a metal to semiconductor transition dependent upon composition. A relatively strong diamagnetic minimum of x = ?26 × 10^?6 cm³/mol was found near the composition of the stoichiometric formula Na₃Sb. This minimal susceptibility can be relatively well described with an ionic type binding model.     

Nonstoichiometry of the perovskite-type solid solution La0.9Ca0.1Cr1−yAlyO3−δ

Nonstoichiometry of the perovskite-type solid solutions La_0.9Ca_0.1Cr_1−yAl_yO_3−δ was studied by high-temperature gravimetry under controlled P(O₂) atmospheres of 1–10^− 23 bar at 1073–1273 K. The observed data were described by a regular solution-like model for the randomly distributed defects of V_O¨, Cr_Cr., Ca_La,, and Al_Cr^X. With the increase in y, V_O¨ formation becomes much easier. For y > 0.8, some fraction of Ca_La, becomes surrounded only by Al_Cr^X and V_O¨ remains around such Ca_La, up to high P(O₂) to reduce the maximum oxygen content below 3.000.     

Dimethyl methylphosphonate decomposition on fully oxidized and partially reduced ceria thin films

The thermal decomposition of dimethyl methylphosphonate (DMMP) on crystalline ceria thin films grown on Ru(0 0 0 1) was studied by temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS) and infrared absorption reflection spectroscopy (IRAS). TPD experiments show that methanol and formaldehyde desorb as the two main products at 575 K, while water, formaldehyde and CO are produced above 800 K. IRAS studies demonstrate that DMMP adsorbs via the phosphoryl oxygen at 200 K, but the PO bond converts to a bridging OPO species at 300 K. DMMP decomposition initially occurs via POCH₃ bond scission to form methyl methylphosphonate (MMP) and methyl phosphonate (MP) between 300 and 500 K; XPS and IRAS data are consistent with a methoxy intermediate on the surface at these temperatures. The more stable PCH₃ bonds remain intact up to 700 K, and the only surface intermediate at higher temperatures is believed to be PO_x. Although the presence of PO_x decreases activity for DMMP decomposition, some activity on the ceria surface remains even after 7 cycles of adsorption and reaction. The ceria films become reduced by multiple DMMP adsorption-reaction cycles, with the Ce⁺⁴ content dropping to 30% after seven cycles. Investigations of DMMP reaction on reduced ceria surfaces show that CO and H₂ are produced in addition to methanol and formaldehyde. Furthermore, DMMP decomposition activity on the reduced ceria films is almost completely inhibited after only 3 adsorption-reaction cycles. Similarities between DMMP and methanol chemistry on the ceria films suggest that methoxy is a key surface intermediate in both reactions.     

Mid-wave infrared liquid crystal shutter for breathalyzer applications

There exists a problem with an in situ diagnostics of contamination of ethyl alcohol in a human being exhaled air. When ethyl alcohol in a mouth blowing (in a gaseous state) exists, the characteristic CH stretch absorption bands in CH₃ and CH₂ functional groups in ethanol (CH₃CH₂OH) appear at a wavelength of λ = 3.42 μm. To investigate the presence of ethyl alcohol in exhaled human air, the light beam of λ = 3.42 μm is passing through an air sample. If one alternately measures the intensity of the investigated beam and the reference, a percentage of ethanol in the air sample can be estimated using a sensitive nondispersive infrared (NDIR) system with a stable operating flow mass detector. To eliminate a mechanical chopper and noise generating stepper motors, a photonic chopper as a liquid crystal shutter for λ = 3.42 μm has been designed. For this purpose, an innovative infrared nematic liquid crystal mixture was intentionally prepared. The working mixture was obtained by a selective removal of CH bonds and its exchange by heavier polar substituents, what ensures a lack of absorption band of CH bonds. The paper presents theory, concept and final experimental results of the infrared nematic liquid crystals mixture and the liquid crystal shutter for breathalyzer applications.     

Structural characteristics of mixed oxides MOx/SiO2 affecting photocatalytic decomposition of methylene blue

A series of photocatalysts based on silica (nanoparticulate) supported titania, ceria, and ceria/zirconia were synthesized and characterized by a variety of techniques including surface area measurements, X-ray diffraction, Fourier transform infrared spectroscopy, zeta potential, surface charge density, and photocatalytic behavior toward methylene blue decomposition. Thermal treatment at 600 °C increases the anatase content of the titania based catalysts detected by XRD. Changes in the infrared spectra before and after thermal treatment indicate that at low temperature there are more SiOTi bonds than at high temperature. As these bonds break upon heating the SiO₂ and TiO₂ separate, allowing the TiO₂ anatase phase to form. This results in an increased catalytic activity for the thermally treated samples. Nearly all titania based samples exhibit a negative surface charge density at pH 7 (initial pH of photocatalytic studies) which aids adsorption of methylene blue. The crystallinity of ceria and ceria/zirconia based catalysts are in some cases limited, and in others non-existent. Even though the energy band gap (E_g) can be lower for these catalysts than for the titania based catalysts, their photocatalytic properties are inferior.     

Unusual oxygen re-equilibration kinetics of TiO2−δ

Oxygen re-equilibration kinetics, along with the equilibrium conductivity, have been measured on undoped, single-crystal TiO_2−δ, by a four-probe d.c. conductivity relaxation technique, against oxygen partial pressure in the range of − 16 < log(P_O2/atm) ≤ 0 at different temperatures in the range of 1173 ≤ T/K ≤ 1373. The isothermal conductivity varies as σ ∝ P_O2^m with m ≈ − 1/4, − 1/5 and − 1/6 in turn with increasing P_O2 up to 1 atm, suggesting a sequential variation of the majority ionic disorder types from Ti_i to Ti_i to V_O, respectively. Contrary to the conventional knowledge that due to the local (defect) equilibrium postulate there should be one and only one chemical diffusivity or single relaxation time for a binary oxide, the oxygen re-equilibration kinetics has turned out to be twofold with two different relaxation times depending on oxygen activities. This is interpreted as being due to the independent relaxation of each sublattice of TiO₂ in an oxygen activity gradient applied, indicating a failure of local equilibrium during oxygen re-equilibration. From the two different relaxation times the chemical diffusion coefficients of component Ti and O are separately evaluated and subsequently, their self-diffusion coefficients. The latter are found to be in a good agreement with the literature data.     

Thermal activation and reaction of allyl alcohol on Ni(100)

The thermal chemistry of allyl alcohol (CH₂CHCH₂OH) on a Ni(100) single-crystal surface was studied by the temperature programmed desorption (TPD) and the X-ray photoelectron spectroscopy (XPS). The allyl alcohol adsorbs molecularly on the metal surface at 100 K. Intact molecular desorption from the surface occurs at temperatures around 180 K, but some molecules exhibit chemical reactivity on the surface: activation of the OH, CC, and CO bonds produces η¹(O)-allyloxy CH₂CHCH₂O_(a), η²(C, C) allyl alcohol (C_(a)H₂C_(a)HCH₂OH), and η³(C, C, O)-alkoxide (C_(a)H₂C_(a)CH₂ O_(a)) intermediates. Further thermal activation of allyl alcohol on the surface yields propylene (CH₂CHCH₃), 1-propanol (CH₃CH₂CH₂OH), propanal (CH₃CH₂CHO), and combustion and dehydrogenation products (H₂O, H₂, and CO). Propylene desorbs from the surface at temperatures of around 270 K. Hydrogenation to the η³(C, C, O)-alkoxide intermediate leads to the production of propanal which desorbs from the surface around 320 K, while hydrogenation of the η²(C, C) allyl alcohol intermediate produces 1-propanol, which desorbs at around 310 K. The co-adsorption of hydrogen atoms on the surface enhances the formation of the saturated alcohol, while co-adsorption of oxygen enhances the formation of both the saturated alcohol and the saturated aldehydes.     

Oxygen chemisorption as a tool for atom discrimination in the SiGe termination layer

This Letter describes a novel method of employing the phenomenon of oxygen chemisorption for atom discrimination in the SiGe surface termination layer. Formation of SiO species on clean Si(100) gives rise to peaks at 7 and 10.2 eV in He I UPS and a peak at 532.3 eV in O 1s XPS. Whereas GeO species on a Ge(100) surface exhibits a single peak at 5.2 eV in He I UPS and a peak at 531.3 eV in O 1s XPS. These signature spectra of SiO and GeO species have been effectively employed for atom discrimination in the termination layer of SiGe surfaces. Upon dosing at room temperature, on a sample prepared by depositing 5ÅGe on Si(100) at 550°C, oxygen bonds with Ge atoms forming GeO, exclusively. This indicates termination entirely by Ge atoms. Oxygen adsorption at room temperature, on a sample prepared by codeposition of Ge and Si (total 5Å) onto Si(100) at 550°C, forms a mixture of SiO and GeO species suggesting a surface termination by both Ge and Si atoms.     

First-principles investigation of structural,elastic, electronic and magnetic properties of Be0.75Co0.25Y (YS,Se and Te) compounds

We have theoretically investigated the structural, elastic, electronic and magnetic properties of Be_0.75Co_0.25Y (YS, Se and Te) alloys, in their zinc-blend phase. This study is carried out by using the full-potential augmented plane wave plus local orbitals method within the density functional theory. Foe computing the exchange-correlation potential, the Wu and Cohen generalized gradient approximation is employed to calculate structural and elastic properties whereas the modified Becke and Johnson potential local density approximation is utilized to examine electronic and magnetic properties. By minimizing the total energy in paramagnetic (PM) and ferromagnetic (FM) phases, it is found the studied compounds are stable in FM structure. The mechanical behavior of the studied compounds is reported with the calculation of shear modulus, Young's modulus, and Poisson's ratio provides. Such mechanical aspects might be useful for the experimentalists to study the mechanical properties upon alloying BeY compounds with Co. We also compute electronic structures, density of states (total and partial), pd-exchange splitting and magnetic moments. Moreover, bond nature is studied by estimating the spin polarized charge densities of Be_0.75Co_0.25Y (YS, Se and Te).     

TG–FTIR analysis on pyrolysis and combustion of marine sediment

In this paper, the pyrolysis and combustion of sediment have been compared using thermogravimetric analysis (TG) coupled with Fourier transform infrared spectrometry (TG-FTIR) analysis. The TG results showed that both the pyrolysis and combustion of sediment presented four weight loss stages, each. The evolving gaseous products during pyrolysis were H₂O, CO₂ and hydrocarbons, while combustion yielded considerable amounts of CO₂, in addition to H₂O, CO, CC, CO and NH₃. Comparing the pyrolysis and combustion TG-FTIR curves, it is possible to evaluate the effect of oxygen presence in the temperature range of 200–600 °C, which increases the volatilisation rate of organic matter in sediment. For the better detection of organic and inorganic matter in sediment by TG-FTIR analysis it is recommended to work in combustion mode of sediment.     

Determination of nitrofurans in feeds based on silver nanoparticle-catalyzed chemiluminescence

A highly sensitive chemiluminescence (CL) method for the determination of nitrofurans (NFs) was developed based on the enhancement of CL intensity of luminol–H₂O₂–NFs system by silver nanoparticles (AgNPs). It was supposed that the oxygen-related radicals of OH and superoxide radical (O₂^?) could be produced when NFs reacted with H₂O₂. Furthermore, the enhancement mechanism was originated from the reinforcer of AgNPs, which could catalyze the generation of the OH radical. Then OH radicals reacted with luminol anion and HO₂^? to form luminol radical (L^?) and O₂^?. The excited state 3-aminophthalate anion was obtained in the reaction of L^? and O₂^?, which was the emitter (luminophor) in the luminol–H₂O₂ CL reaction system and the maximal emission of the CL spectrum was at 425 nm. The experiments of scavenging oxygen-related radicals were done to confirm these reactive oxygen species participated in the CL reaction. The limits of detection (LOD) (S/N=3) were 8×10^?7 g mL^?1 for furacilin, 8×10^?8 g mL^?1 for furantoin, 4×10^?8 g mL^?1 for furazolidone and 2×10^?7 g mL^?1 for furaltadone. The proposed method was successfully applied to the determination of NFs in feeds and pharmaceutical samples.     

Using pulsed wave ultrasound to evaluate the suitability of hydroxyl radical scavengers in sonochemical systems

Hydroxyl radical (OH) scavengers are commonly used in sonochemistry to probe the site and nature of reaction in aqueous cavitational systems. Using pulsed wave (PW) ultrasound with comparative sonochemistry we evaluated the performance of OH scavengers (i.e., formic acid, carbonic acid, terephthalic acid/terephthalate, iodide, methanesulfonate, benzenesulfonate, and acetic acid/acetate) in a sonochemical system to determine which OH scavengers react only in bulk solution and which OH scavengers interact with cavitation bubbles. The ability of each scavenger to interact with cavitation bubbles was assessed by comparing the pulse enhancement (PE) of 10 μM of a probe compound, carbamazepine (CBZ), in the presence and absence of a scavenger. Based on PE results, acetic acid/acetate appears to scavenge OH in bulk solution, and not interact with cavitation bubbles. Methanesulfonate acts as reaction promoter, increasing rather than inhibiting the degradation of CBZ. For formic acid, carbonic acid, terephthalic acid/terephthalate, benzenesulfonate, and iodide, the PE was significantly decreased compared to in the absence of the scavenger. These scavengers not only quench OH in bulk solution but also affect the cavity interface. The robustness of acetic acid/acetate as a bulk OH scavenger was validated for pH values between 3.5 and 8.9 and acetic acid/acetate concentrations from 0.5 to 0.1 M.     

IR wavelength-selective laser desorption via OH and CH stretching modes

We present new results on wavelength-selective desorption of solid samples using the resonant interaction between the laser beam and the bulk. The experimental set-up is based on the coupling of three techniques: laser desorption in the near-infrared (IR) (2.7–4 μm) with a tunable IR optical parametric oscillator (OPO), UV multi-photon ionization, and reflectron time-of-flight mass spectrometry. The resonant character of the laser desorption process has been investigated for an ice/polycyclic aromatic hydrocarbon (PAH) mixture, by excitation of the OH and CH stretching modes. Highly preferential desorption has been evidenced, with exclusive desorption of water and PAH molecules at the OH and CH resonances, respectively. Potential analytical (e.g. selective analysis of complex samples) and technological (e.g. dry laser cleaning, DLC) applications are discussed.     

Assay of hydroxyl radicals generated by focused ultrasound

Water sonolysis leads to the formation of hydroxyl radicals (OH). Various techniques are used to detect the OH production and thus to assess the level of ultrasound-mediated cavitation generated in vitro. In this study, we used terephthalic acid (TA) as an OH trap. This method is based on the fluorescent properties of hydroxyterephthalic acid (HTA) formed by the reaction of TA with OH and used as an indicator of the degree of inertial cavitation caused.The experimental system is comprised mainly of a focused piezoelectric ultrasound transmitter and a measurement cell containing 1X PBS/TA diluted solution. In the first part, we aimed to characterize the most appropriate experimental conditions (TA dosimeter solution, irradiation time) in order to optimize the resulting HTA fluorescence values. Then, we could determine that the HTA production increased with the level of the cavitation phenomenon caused by the acoustic power from which OH production may be estimated.     

Synthesis and characterization of silanized-SiO2/povidone nanocomposite as a gate insulator: The influence of Si semiconductor film type on the interface traps by deconvolution of Si2s

The polymer nanocomposite as a gate dielectric film was prepared via sol-gel method. The formation of cross-linked structure among nanofillers and polymer matrix was proved by Fourier transform infrared spectroscopy (FT-IR). Differential thermal analysis (DTA) results showed significant increase in the thermal stability of the nanocomposite with respect to that of pure polymer. The nanocomposite films deposited on the p- and n-type Si substrates formed very smooth surface with rms roughness of 0.045 and 0.058 nm respectively. Deconvoluted Si_2s spectra revealed the domination of the SiOH hydrogen bonds and SiOSi covalence bonds in the structure of the nanocomposite film deposited on the p- and n-type Si semiconductor layers respectively. The fabricated n-channel field-effect-transistor (FET) showed the low threshold voltage and leakage currents because of the stronger connection between the nanocomposite and n-type Si substrate. Whereas, dominated hydroxyl groups in the nanocomposite dielectric film deposited on the p-type Si substrate increased trap states in the interface, led to the drop of FET operation.     

Electrostatic properties of PE and PTFE subjected to atmospheric pressure plasma treatment; correlation of experimental results with atomistic modeling

The use of an atmospheric pressure glow discharge (APGD) plasma was used at Kennedy Space Center (KSC) to increase the hydrophilicity of spaceport materials to enhance their surface charge dissipation and prevent possible electrostatic discharge (ESD) in spaceport operations. Significant decreases in charge decay times were observed after tribocharging the materials using the standard KSC tribocharging test. The polarity and amount of charge transferred was dependant upon the effective work function differences between the respective materials. In this study, PE and PTFE were exposed to a He+O₂ APGD. The pre and post-treatment surface chemistries were analyzed by X-ray photoelectron spectroscopy and contact angle measurements. Semi-empirical and ab initio calculations were performed to correlate the experimental results with some plausible molecular and electronic structure features of the oxidation process. For the PE, significant surface oxidation was observed, as indicated by XPS showing C–O, CO, and O–CO bonding, and a decrease in the surface contact angle from 98.9° to 61.2°. For the PTFE, no C–O bonding appeared and the surface contact angle increased indicating the APGD only succeeded in cleaning the PTFE surface without affecting the surface structure.The calculations using the Parametric Method 3 (PM3) and Density Function Theory (DFT) methods were performed on single and multiple oligomers to simulate a wide variety of oxidation scenarios. Calculated work function results suggest that regardless of oxidation mechanism, e.g. –OH, O or a combination thereof, the experimentally observed levels of surface oxidation are unlikely to lead to a significant change in the electronic structure of PE and that its increased hydrophilic properties are the primary reason for the observed changes in its electrostatic behavior. The calculations for PTFE argue strongly against significant oxidation of that material, as confirmed by the XPS results.