Unique elution behavior of bromide and nitrate in anion-exchange chromatography using aqueous potassium chloride eluent containing cadmium or zinc ion

In anion-exchange chromatography using a high-concentration eluent and high-capacity ion-exchange resin, the effect of the countercation contained in the eluent was investigated. Cadmium(II) and zinc(II) ions were examined as additives in an aqueous potassium chloride eluent. The addition of these cations resulted in a reversed elution order of bromide and nitrate, as compared with conventional anion-exchange chromatography. The separation factor for these two anions increased as the cadmium concentration in the eluent was increased. Zinc(II) ion was also effective, but a relatively high concentration was necessary.     

Precise determination of Pu isotopes in a seawater reference material using ID-SF-ICP-MS combined with two-stage anion-exchange chromatography.

In order to obtain the precise Pu isotope composition of Irish Sea water reference material issued by the International Atomic Energy Agency (IAEA-381), we analyzed the activities of (239)Pu, (240)Pu and the atom ratio of (240)Pu/(239)Pu by a highly sensitive isotope dilution SF-ICP-MS method combined with two-stage chromatographic separation and purification. With a mean chemical yield of 65% for (242)Pu tracer, the experimentally established values for (239)Pu, (240)Pu and (239+240)Pu activities are in good agreement with the certified ones. For the (240)Pu/(239)Pu atom ratio, we obtain a value of 0.2315 +/- 0.0008 with a high precision (RSD, 0.35%), which is much more precise than the information value of 0.22 +/- 0.03 (RSD, 13.6%) provided by the IAEA certification report. The precise determination of Pu isotopes in this seawater reference material will be useful for the validation of analytical methods for the study of radionuclides in the marine environment.     

Determination of nitrite, nitrate, bromide, and iodide in seawater by ion chromatography with UV detection using dilauryldimethylammonium-coated monolithic ODS columns and sodium chloride as an eluent

A method was developed for determination of inorganic anions, including nitrite (NO ₂ ^? ), nitrate (NO ₃ ^? ), bromide (Br^?), and iodide (I^?), in seawater by ion chromatography (IC). The IC system used two dilauryldimethylammonium bromide (DDAB)-coated monolithic ODS columns (50?×?4.6?mm i.d. and 100?×?4.6?mm i.d.) connected in series for separation of the ions. Aqueous NaCl (0.5?mol/L; flow rate, 3?mL/min) containing 5?mmol/L phosphate buffer (pH 5) was used as the eluent, and detection was with a UV detector at 225?nm. The monolithic ODS columns were coated and equilibrated with a 1-mmol/L DDAB solution (in H₂O/methanol, 90:10 v/v). The hydrophilic ions (NO ₂ ^? , NO ₃ ^? , and Br^?) were separated within 3?min and the retention time of I^? was 16?min. No interferences from matrix ions, such as chloride and sulfate ions, were observed in 35?‰ artificial seawater. The detection limits were 0.6?μg/L for NO ₂ ^? , 1.1?μg/L for NO ₃ ^? , 70?μg/L for Br^?, and 1.6?μg/L for I^? with a 200-μL sample injection. The performance of the coated columns was maintained without addition of DDAB in the eluent. The IC system was successfully applied to real seawater samples with recovery rates of 94–108?% for all ions.

离子排斥色谱结合光度检测的水质监测系统用于测定离子型营养物（英文）

A unified ion-exclusion chromatography(IEC) system for monitoring anionic and cationic nutrients like NH + 4,NO 2,NO 3,phosphate ion,silicate ion and HCO 3 was developed and applied to several environmental waters.The IEC system consisted of four IEC methodologies,including the IEC with ultraviolet(UV) detection at 210 nm for determining NH + 4 on anion-exchange separation column in OH form connected with anion-exchange UV-conversion column in I form in tandem,the IEC with UV-detection at 210 nm for determining simultaneously NO 2 and NO 3 on cation-exchange separation column in H + form,the IEC with UV-detection at 210 nm for determining HCO 3 on cation-exchange separation column in H + form connected with anion-exchange UV-conversion column in I form in tandem,and the IEC with visible-detection based on molybdenum-blue reaction for determining simultaneously silicate and phosphate ions on cation-exchange separation column in H + form.These IEC systems were combined through three manually-driven 6-port column selection valves to select each separation column to determine selectively the ionic nutrients.Using this sequential water quality monitoring system,the analytical performances such as calibration linearity,reproducibility,detection limit and recovery were also tested under the optimized chromatographic conditions.This novel water quality monitoring system has been applied successfully for the determination of the ionic eutrophication components in sub-urban river waters.     

Simultaneous determination of chloride, nitrate and sulphate in vegetable samples by single-column ion chromatography

A new ion chromatography method is described for the simultaneous determination of Cl⁻, NO₃⁻ and SO₄²⁻, using a selected eluent 1.3-mM sodium gluconate/1.3-mM borax (pH 8.5). The extraction methods of Cl⁻, NO₃⁻, SO₄²⁻ in vegetables are studied. The determination limits of Cl⁻, NO₃⁻, SO₄²⁻ are 0.17 μg/ml, 0.63 μg/ml and 0.81 μg/ml. The linear ranges are 060 μg/ml, 090 μg/ml and 090 μg/ml. The relative S.D. are <2.5%. The mean recoveries of Cl⁻, NO₃⁻, SO₄²⁻ in vegetables range from 97.0 to 104%.     

强碱阴离子交换树脂及碱性洗脱剂的离子排阻/阴离子交换色谱法同时测定NH4+ ，NO2-和NO3-（英文）

Ion-exclusion/anion-exchange chromatography(IEC/AEC) on a combination of a strongly basic anion-exchange resin in the OH——form with basic eluent has been developed.The separation mechanism is based on the ion-exclusion/penetration effect for cations and the anion-exchange effect for anions to anion-exchange resin phase.This system is useful for simultaneous separation and determination of ammonium ion(NH+4),nitrite ion(NO-2),and nitrate ion(NO-3) in water samples.The resolution of analyte ions can be manipulated by changing the concentration of base in eluent on a polystyrene-divinylbenzene based strongly basic anion-exchange resin column.In this study,several separation columns,which consisted of different particle sizes,different functional groups and different anion-exchange capacities,were compared.As the results,the separation column with the smaller anion-exchange capacity(TSKgel Super IC-Anion) showed well-resolved separation of cations and anions.In the optimization of the basic eluent,lithium hydroxide(LiOH) was used as the eluent and the optimal concentration was concluded to be 2 mmol/L,considering the resolution of analyte ions and the whole retention times.In the optimal conditions,the relative standard deviations of the peak areas and the retention times of NH+4,NO-2,and NO-3 ranged 1.28%-3.57% and 0.54%-1.55%,respectively.The limits of detection at signal-to-noise of 3 were 4.10 μmol/L for NH+4,1.87 μmol/L for NO-2 and 2.83 μmol/L for NO-3.     

Ion chromatography for determination of nitrite and nitrate in seawater using monolithic ODS columns

A fast and highly sensitive ion chromatographic method using monolithic ODS columns was developed for the determination of nitrite (NO2-) and nitrate (NO3-) in seawater. Two monolithic ODS columns (50 mm x 4.6 mm i.d. + 100 mm x 4.6 mm i.d.) connected in series were coated and equilibrated with 5 mM cetyltrimethylammonium chloride (CTAC) aqueous solution. The column efficiency with 0.5 M NaCl as the mobile phase did not decrease in spite of the increase in flow rate of the mobile phase. Thus, good chromatograms were obtained within 3 minutes for NO2- and NO3 in artificial seawater without interferences by coexisting ions. The detection limit (S/N = 3) with UV detection at 225 nm was 0.8 and 1.6 microg/L for NO2- and NO3-, respectively. The characteristics of the monolithic CTA(+)-coated ODS columns were discussed. The present method was successfully applied to the fast and sensitive determination of NO2- and NO3- in real seawater samples.     

Determination of oxybutinin chloride in pharmaceuticals by reversed-phase ion-pair liquid chromatography with two counter-ions in the eluent

A reliable stability-indicating method using reversed-phase ion-pair high-performance liquid chromatography for the determination of the anticholinergic drug oxybutinin chloride in pharmaceuticals is reported. Sample extraction is easy and fairly rapid and recovery and precision of the method are excellent. Due to the simultaneous use of an organic amine and of an alkanesulphonate in the mobile phase, good selectivity towards related (quaternary ammonium) anticholinergic drugs was obtained.     

Experimental determination of chlorine isotope separation factor by anion-exchange chromatography

Chlorine isotope fractionation factor was determined by strongly basic anion-exchange chromatography with 0.1 mol/l HCl at 25 °C. The magnitude of the factor was calculated as a single-stage separation factor of 1.00030 with analytical precision of 0.00006 (1σ). The results showed that the lighter isotope () was preferentially fractionated into the resin phase, while the heavier one () enriched into the aqueous phase. This trend suggested that the hydrated Cl⁻ ions in the aqueous phase were slightly more stable than the hydrated Cl⁻ ions electrostatically interacting with the ion-exchange groups of the resin.     

Highly efficient separation of lithium chloride from seawater

A complexing reagent composed of two bipyridine moieties enabled the efficient separation of lithium chloride through liquid membrane from seawater, in which 0.005% lithium chloride is contained (more than 99% metal chlorides are NaCl, KCl, MgCl2, and CaCl2). That is, two separations by our liquid membrane changed the molar ratio of LiCl from 0.005% to 80%. The striking characteristic of this compound is that the lithium ion is separated efficiently from alkali and alkaline earth metal ions without the lipophilic anion. Thus this new membrane system contructed by us offers a low-energy, low-cost, and environmentally friendly method to enable the routine use of lithium chloride separation from seawater.     

Interpretation of solute retention of some monovalent inorganic anions in anion-exchange chromatography using a dicarboxylic Acid as an eluent.

In single-column anion-exchange chromatography, the retention volume of some monovalent inorganic anions (Cl(-), Br(-), NO(3)(-), NCS(-) and NO(2)(-)) were observed as a function of the pH of a mobile phase at a fixed concentration of 2-phenylmalonic acid or 1,4-benzenediacetic acid used as an eluent. The experimental retention volume of such an anion was decreased with an increase in the pH of a mobile phase, and was able to be described by the following equation taking account of anion-exchange equilibria of a sample anion with a hydrogen dicarboxylate ion (HE(-)) and with a dicarboxylate ion (E(2-)): alpha(1s)/V(R)'[HE(-)] = 1/m(T)wK(ex1) + (2K(a2)/m(T)w(2)K(ex2))(V(R)'/alpha(1s)[H(+)]), where V(R)', m(T), w, K(a2), K(ex1) and K(ex2) are the adjusted retention volume of a given sample anion, the capacity for the anion-exchange of column packings and the weight of column packings packed into a separating column, the second acid-dissociation constant of the dicarboxylic acid used as an eluent, and equilibrium constants for the anion exchange of a sample anion with a monovalent hydrogen dicarboxylate ion and with a divalent dicarboxylate ion, respectively. The term alpha(1s), defined as K(as)/([H(+)] + K(as)), where K(as) is the acid-dissociation constant of HX, is the mole fraction of a sample anion, X(-), and is equal to 1 when using a strong acid anion as a sample anion.     

Reversed-phase liquid chromatography coupled on-line with capillary gas chromatography use of an anion-exchange membrane to remove an ion-pair reagent from the eluent

Summary In order to enable the coupling of reversed-phase liquid chromatography (RPLC) with capillary gas chromatography (GC), the performance of an anion-exchange micromembrane device has been studied to remove the ion-pair reagent methanesulphonic acid from an acetonitrile/water LC eluent. The regenerant in the membrane was tetrabutylammonium hydroxide dissolved in acetonitrile/water, which effects an anion-exchange of methanesulphonate ions for regenerant hydroxide ions. The efficiency of the exchange process was found to be 99.9%. This enabled the direct introduction of the LC eluent, free of ions and with the proper acetonitrile/water ratio, into the GC. The applicability of the on-line LC-micromembrane-GC system has been illustrated for the potential drug eltoprazine, which is quantitatively recovered with a coefficient of variation for standard solutions of 3% at the 150 g/ml analyte level.     

Precise determination of lithium isotopes in seawater using MC-ICP-MS

Li (lithium) isotope analysis using MC-ICP-MS is a very powerful tracer measurement method. This is widely used for identification of Li isotopes in many fields of study. This useful method, however, has an effect on the natural Li isotope background. This is impacted by the instrument matrix. In this study, we show that the MC-ICP-MS condition is characterized by both a low baseline background and a high-sensitivity distance at Ar plasma condition. In addition, the Li isotope ratio was measured by the use of experimental conditions that were superior to both the general plasma condition and those used in other studies. The samples were subjected to both acid leaching and a cation exchange resin (Bio-Rad AG 50 W-X8 200–400 mesh) modified for seawater samples. The isotope variations were corrected using the bracket method, the measured Li isotope ratio of sample, and the mean ratios of the L-SVEC standard (NIST L-SVEC Li₂CO₃) measured before and after the sample run. The isotope variation was presented as the deviation (per mil) of the measured ratio from that of the recommended value.     

Quantitative determination of taurine in real samples by high-performance anion-exchange chromatography with integrated pulsed amperometric detection

As taurine is a very important compound involved in a large number of metabolic processes, it is naturally present in the mammal tissues and is often deliberately added in some foods as a fortifying component. A detailed knowledge of taurine metabolic roles in biological systems can be obtained only if a sensitive, reliable and rapid analytical method is available. This article describes the successful application of high-performance anion-exchange chromatography coupled with integrated pulsed amperometric detection (HPAEC-IPAD) for taurine determination in egg white and yolk samples, as well extracts of human serum and urine. Applications are shown for determination of taurine in soft drinks and pharmaceutical preparations where the taurine content was evaluated by standard additions. These results were achieved without prior derivatization of taurine.     

Simultaneous determination of amino acids and carbohydrates by anion-exchange chromatography with integrated pulsed amperometric detection

A direct, sensitive, simple and practical method for simultaneous determination of amino acids and carbohydrates by anion-exchange chromatography with integrated pulsed amperometric detection was developed. The retention behavior of amino acids and carbohydrates on the anion-exchange column and the detection of amino acids and carbohydrates at different integrated pulsed amperometric detection waveforms were investigated. The optimized gradient eluent conditions for analysis of 17 amino acids and nine carbohydrates were obtained. Separation time was 100 min. Detection limits for amino acids and carbohydrates were 5.2-207.1 nM under injection volume of 25 microl. The RSDs of peak area were 1.2-3.3%. The calibration graphs of peak area for the analytes were linear over about three orders of magnitude with a correlation coefficient of 0.9950-0.9999. The method was applied to determine amino acids and carbohydrates in a liquid condiment with satisfactory results.     

Continuous dialysis of hydrochloric acid and lithium chloride: permeability of anion-exchange membrane to chloride ions

A counter-current two-compartment dialyzer equipped with an anion-exchange membrane Neosepta-AFN was used to study dialysis of a hydrochloric acid and lithium chloride mixture. To quantify this process, several characteristics were calculated from the data obtained at steady state. First, the dialysis process was characterized by the acid recovery yield and rejection coefficient of salt, which were in the range of 61–98% and 62–94%, respectively (for HCl and LiCl concentrations from 0.1 to 1.0 kmol m^?3 and volumetric liquid flow rates from 8 × 10^?9 to 24 × 10^?9 m³ s^?1). Furthermore, this study proved that dialysis of an HCl + LiCl mixture can be quantified by a single characteristic, i.e., the permeability coefficient of the membrane to chloride ions, which is a function of the concentration of both the components in the feed.     

Separation and determination of alditols and sugars by high-pH anion-exchange chromatography with pulsed amperometric detection

Carbohydrates such as alditols (polyols or sugar alcohols), monosaccharides and disaccharides are separated as anions by anion-exchange chromatography with a sodium hydroxide eluent, MA1 CarboPac column and pulsed amperometric detection. We report a high-pH anion-exchange chromatographic-pulsed amperometric detection (HPAEC-PAD) method that determines all the polyols used as food additives in food products and the most commonly found mono- and disaccharides on a routine basis. The linearity, repeatability, internal reproducibility and accuracy are described. The applicability of the method has been demonstrated by the analysis of 46 relevant samples and by participation twice in the Food Analysis Performance Assessment Scheme (FAPAS) testing programme for food additives.     

Analysis of bronze by anion-exchange chromatography

Summary An ion-exchange procedure is recommended for the analysis of bronzes. Accuracy and precision of the results is satisfactory and less time is required than with classical methods.

---

Zusammenfassung Zur Analyse von Bronzen wird ein Ionenaustauschverfahren empfohlen, das zufriedenstellende Ergebnisse liefert. Gegenüber klassischen Methoden hat es den Vorteil geringeren Zeitbedarfs.