Optimization of Fermentation Process of Pomegranate Peel and Schisandra Chinensis and the Biological Activities of Fermentation Broth: Antioxidant Activity and Protective Effect Against H2O2-induced Oxidative Damage in HaCaT Cells

In this study, the lactobacillus fermentation process of pomegranate (Punica granatum L.) peel and Schisandra chinensis (Turcz.) Baill (PP&SC) was optimized by using the response surface method (RSM) coupled with a Box-Behnken design. The optimum fermentation condition with the maximal yield of ellagic acid (99.49 ± 0.47 mg/g) was as follows: 1:1 (w:w) ratio of pomegranate peel to Schisandra chinensis, 1% (v:v) of strains with a 1:1 (v:v) ratio of Lactobacillus Plantarum to Streptococcus Thermophilus, a 37 °C fermentation temperature, 33 h of fermentation time, 1:20 (g:mL) of a solid–liquid ratio and 3 g/100 mL of a glucose dosage. Under these conditions, the achieved fermentation broth (FB) showed stronger free radical scavenging abilities than the water extract (WE) against the ABTS⁺, DPPH, OH⁻ and O₂⁻ radicals. The cytotoxicity and the protective effect of FB on the intracellular ROS level in HaCaT cells were further detected by the Cell Counting Kit-8 (CCK-8) assay. The results showed that FB had no significant cytotoxicity toward HaCaT cells when its content was no more than 8 mg/mL. The FB with a concentration of 8 mg/mL had a good protective effect against oxidative damage, which can effectively reduce the ROS level to 125.94% ± 13.46% (p < 0.001) compared with 294.49% ± 11.54% of the control group in H₂O₂-damaged HaCaT cells. The outstanding antioxidant ability and protective effect against H₂O₂-induced oxidative damage in HaCaT cells promote the potential for the FB of PP&SC as a functional raw material of cosmetics.     

Valorization of Fermented Shrimp Waste with Supercritical CO2 Conditions: Extraction of Astaxanthin and Effect of Simulated Gastrointestinal Digestion on Its Antioxidant Capacity

Lactic acid fermentation increases the bioactive properties of shrimp waste. Astaxanthin is the principal carotenoid present in shrimp waste, which can be found esterified in the liquid fraction (liquor) after its lactic acid fermentation. Supercritical CO₂ technology has been proposed as a green alternative to obtain astaxanthin from fermented shrimp waste. This study aimed to optimize astaxanthin extraction by supercritical CO₂ technology from fermented liquor of shrimp waste and study bioaccessibility using simulated gastrointestinal digestion (GD) of the optimized extract. A Box–Behnken design with three variables (pressure, temperature, and flow rate) was used to optimize the supercritical CO₂ extraction. The optimized CO₂ extract was obtained at 300 bar, 60 °C, and 6 mL/min, and the estimated characteristics showed a predictive extraction yield of 11.17%, antioxidant capacity of 1.965 mmol of Trolox equivalent (TE)/g, and astaxanthin concentration of 0.6353 µg/g. The experiment with optimal conditions performed to validate the predicted values showed an extraction yield of 12.62%, an antioxidant capacity of 1.784 mmol TE/g, and an astaxanthin concentration of 0.52 µg/g. The astaxanthin concentration decreased, and the antioxidant capacity of the optimized extract increased during gastrointestinal digestion. In conclusion, our optimized supercritical CO₂ process is suitable for obtaining astaxanthin from shrimp by-products after lactic acid fermentation.     

Comparative Study of Antioxidant and Pro-Oxidant Properties of Homoleptic and Heteroleptic Copper Complexes with Amino Acids,Dipeptides and 1,10-Phenanthroline: The Quest for Antitumor Compounds

In a search for new antitumoral agents, a series of homoleptic copper(II) complexes with amino acids and dipeptides, as well as heteroleptic complexes containing both dipeptides and 1,10-phenanthroline, were studied. Furthermore, a single-crystal structure containing alanyl-leucinato ([Cu₃(AlaLeu)₃(H₂O)₃(CO₃)]·PF₆·H₂O), which is the first homotrinuclear carbonato-bridged copper(II) complex with a dipeptide moiety, is presented. To assess possible antitumor action mechanisms, we focused on the comparative analysis of pro- and antioxidant behaviors. Pro-oxidant activity, in which the reactive oxygen species (ROS) formed by the reaction of the complexes with H₂O₂ produce oxidative damage to 2-deoxy-d-ribose, was evaluated using the TBARS method. Additionally, the antioxidant action was quantified through the superoxide dismutase (SOD)-like activity, using a protocol based on the inhibitory effect of SOD on the reduction of nitrobluetetrazolium (NBT) by the superoxide anion generated by the xanthine/xanthine oxidase system. Our findings show that Cu–amino acid complexes are strong ROS producers and moderate SOD mimics. Conversely, Cu–dipeptide–phen complexes are good SOD mimics but poor ROS producers. The activity of Cu–dipeptide complexes was strongly dependent on the dipeptide. A DFT computational analysis revealed that complexes with high SOD-like activity tend to display a large dipole moment and condensed-to-copper charge, softness and LUMO contribution. Moreover, good ROS producers have higher global hardness and copper electrophilicity, lower copper softness and flexible and freely accessible coordination polyhedra.     

A Low‐Cost Neutral Zinc–Iron Flow Battery with High Energy Density for Stationary Energy Storage

Flow batteries (FBs) are one of the most promising stationary energy‐storage devices for storing renewable energy. However, commercial progress of FBs is limited by their high cost and low energy density. A neutral zinc–iron FB with very low cost and high energy density is presented. By using highly soluble FeCl₂/ZnBr₂ species, a charge energy density of 56.30 Wh L⁻¹ can be achieved. DFT calculations demonstrated that glycine can combine with iron to suppress hydrolysis and crossover of Fe³⁺/Fe²⁺. The results indicated that an energy efficiency of 86.66 % can be obtained at 40 mA cm⁻² and the battery can run stably for more than 100 cycles. Furthermore, a low‐cost porous membrane was employed to lower the capital cost to less than $ 50 per kWh, which was the lowest value that has ever been reported. Combining the features of low cost, high energy density and high energy efficiency, the neutral zinc–iron FB is a promising candidate for stationary energy‐storage applications.     

On the additivity of basis set effects in some simple fluorine containing systems

The reactions F + H₂ → HF + H, HF → H + F, F → F⁺ + e^? and F + e^? → F^? were used as simple test cases to assess the additivity of basis set effects on reaction energetics computed at the MP4 level. The 6-31G and 6-311G basis sets were augmented with 1, 2, and 3 sets of polarization functions, higher angular momentum polarization functions, and diffuse functions (27 basis sets from 6-31Gd, p) to 6-31 ++ G(3df, 3pd) and likewise for the 6-311G series). For both series substantial nonadditivity was found between diffuse functions on the heavy atom and multiple polarization functions (e.g., 6-31 + G(3d, 3p) vs. 6-31 + G(d, p) and 6-31G(3d, 3p)). For the 6-311G series there is an extra nonadditivity between d functions on hydrogen and multiple polarization functions. Provided that these interactions are taken into account, the remaining basis set effects are additive to within ±0.5 kcal/mol for the reactions considered. Large basis set MP4 calculations can also be estimated to within ±0.5 kcal/mol using MP2 calculations, est. E_MP4(6-31 ++ G(3df, 3pd)) ≈ E_MP4(6-31G(d, p)) + E_MP2(6-31 ++ G(3df, 3pd)) – E_MP2(6-31G(d, p)) or E_MP4(6-31 + G(d, p) + E_MP2(6-31 ++ G(3df, 3pd)) – E_MP2(6-31 + G(d, p)) and likewise for the 6-311G series.     

Antioxidant Activity of Ruthenium Cyclopentadienyl Complexes Bearing Succinimidato and Phthalimidato Ligands

In these studies, we investigated the antioxidant activity of three ruthenium cyclopentadienyl complexes bearing different imidato ligands: (η⁵-cyclopentadienyl)Ru(CO)₂-N-methoxysuccinimidato (1), (η⁵-cyclopentadienyl)Ru(CO)₂-N-ethoxysuccinimidato (2), and (η⁵-cyclopentadienyl)Ru(CO)₂-N-phthalimidato (3). We studied the effects of ruthenium complexes 1–3 at a low concentration of 50 µM on the viability and the cell cycle of peripheral blood mononuclear cells (PBMCs) and HL-60 leukemic cells exposed to oxidative stress induced by hydrogen peroxide (H₂O₂). Moreover, we examined the influence of these complexes on DNA oxidative damage, the level of reactive oxygen species (ROS), and superoxide dismutase (SOD) activity. We have observed that ruthenium complexes 1–3 increase the viability of both normal and cancer cells decreased by H₂O₂ and also alter the HL-60 cell cycle arrested by H₂O₂ in the sub-G1 phase. In addition, we have shown that ruthenium complexes reduce the levels of ROS and oxidative DNA damage in both cell types. They also restore SOD activity reduced by H₂O₂. Our results indicate that ruthenium complexes 1–3 bearing succinimidato and phthalimidato ligands have antioxidant activity without cytotoxic effect at low concentrations. For this reason, the ruthenium complexes studied by us should be considered interesting molecules with clinical potential that require further detailed research.     

Impact of Peels Extracts from an Italian Ancient Tomato Variety Grown under Drought Stress Conditions on Vascular Related Dysfunction

Background: Tomato by-products contain a great variety of biologically active substances and represent a significant source of natural antioxidant supplements of the human diet. The aim of the work was to compare the antioxidant properties of a by-product from an ancient Tuscan tomato variety, Rosso di Pitigliano (RED), obtained by growing plants in normal conditions (-Ctr) or in drought stress conditions (-Ds) for their beneficial effects on vascular related dysfunction. Methods: The antioxidant activity and total polyphenol content (TPC) were measured. The identification of bioactive compounds of tomato peel was performed by HPLC. HUVEC were pre-treated with different TPC of RED-Ctr or RED-Ds, then stressed with H₂O₂. Cell viability, ROS production and CAT, SOD and GPx activities were evaluated. Permeation of antioxidant molecules contained in RED across excised rat intestine was also studied. Results: RED-Ds tomato peel extract possessed higher TPC than compared to RED-Ctr (361.32 ± 7.204 mg vs. 152.46 ± 1.568 mg GAE/100 g fresh weight). All extracts were non-cytotoxic. Two hour pre-treatment with 5 µg GAE/mL from RED-Ctr or RED-Ds showed protection from H₂O₂-induced oxidative stress and significantly reduced ROS production raising SOD and CAT activity (* p < 0.05 and ** p < 0.005 vs. H₂O₂, respectively). The permeation of antioxidant molecules contained in RED-Ctr or RED-Ds across excised rat intestine was high with non-significant difference between the two RED types (41.9 ± 9.6% vs. 26.6 ± 7.8%). Conclusions: RED-Ds tomato peel extract represents a good source of bioactive molecules, which protects HUVECs from oxidative stress at low concentration.     

Kinetic parameters for the reaction of hydroxyl radical with CH3OCH2F (HFE‐161) in the temperature range of 200–400 K: Transition state theory and Ab initio calculations

Rate coefficients for the reaction of the hydroxyl radical with CH₃OCH₂F (HFE‐161) were computed using transition state theory coupled with ab initio methods, viz., MP2, G3MP2, and G3B3 theories in the temperature range of 200–400 K. Structures of the reactants and transition states (TSs) were optimized at MP2(FULL) and B3LYP level of theories with 6‐31G* and 6‐311++G** basis sets. The potential energy surface was scanned at both the level of theories. Five different TSs were identified for each rotamer. Calculations of Intrinsic reaction coordinates were performed to confirm the existence of all the TSs. The kinetic parameters due to all different TSs are reported in this article. The rate coefficients for the title reaction were computed to be k = (9 ± 1.08) × 10^?13 exp [?(1,713 ± 33)/T] cm³ molecule^?1 s^?1 at MP2, k = (7.36 ± 0.42) × 10^?13 exp [?(198 ± 16)/T] cm³ molecule^?1 s^?1 at G3MP2 and k = (5.36 ± 1.57) × 10^?13 exp [?(412 ± 81)/T] cm³ molecule^?1 s^?1 at G3B3 theories. The atmospheric lifetimes of CH₃OCH₂F at MP2, G3MP2, and G3B3 level of theories were estimated to be 20, 0.1, and 0.3 years, respectively. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Self‐Assembly of Multi‐nanozymes to Mimic an Intracellular Antioxidant Defense System

In this work, for the first time, we constructed a novel multi‐nanozymes cooperative platform to mimic intracellular antioxidant enzyme‐based defense system. V₂O₅ nanowire served as a glutathione peroxidase (GPx) mimic while MnO₂ nanoparticle was used to mimic superoxide dismutase (SOD) and catalase (CAT). Dopamine was used as a linker to achieve the assembling of the nanomaterials. The obtained V₂O₅@pDA@MnO₂ nanocomposite could serve as one multi‐nanozyme model to mimic intracellular antioxidant enzyme‐based defense procedure in which, for example SOD, CAT, and GPx co‐participate. In addition, through assembling with dopamine, the hybrid nanocomposites provided synergistic antioxidative effect. Importantly, both in vitro and in vivo experiments demonstrated that our biocompatible system exhibited excellent intracellular reactive oxygen species (ROS) removal ability to protect cell components against oxidative stress, showing its potential application in inflammation therapy.     

Characterization,Antioxidant and Anti-Inflammation Capacities of Fermented Flammulina velutipes Polyphenols

This work investigated the preparation, characterization, antioxidant, and anti-inflammation capacities of Flammulina velutipes polyphenols (FVP) and fermented FVP (FFVP). The results revealed that the new syringic acid, accounting for 22.22%, was obtained after fermentation (FFVP). FFVP exhibits higher antioxidant and anti-inflammation activities than FVP, enhancing cell viability and phagocytosis, inhibiting the secretion of NO and ROS, and reducing the inflammatory response of RAW264.7 cells. This study revealed that FFVP provides a theoretical reference for in-depth study of its regulatory mechanisms and further development of functional antioxidants that are applicable in the food and health industry.     

Apoptosis induced by NaYF<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> nanoparticles in liver cells via mitochondria damage dependent pathway

As lanthanide-doped sodium yttrium flouride (NaYF₄) nanoparticles have great potential in biomedical applications, their biosafety is important and has attracted significant attention. In the present work, three different sized NaYF₄:Eu³⁺ nanoparticles have been prepared. Liver BRL 3A cell was used as a cell model to evaluate their biological effects. Cell viability and apoptosis assays were used to confirm the cytotoxicity induced by NaYF₄:Eu³⁺ NPs. Apart from the elevated malondialdehyde (MDA), the decrease of superoxide dismutase (SOD), glutathione peroxidase (GSH-PX) and catalase (CAT) activity indicated reactive oxygen species (ROS) generation, which were associated with oxidative damage. The decrease of mitochondrial membrane potential (MMP) value demonstrated the occurrence of mitochondria damage. Then, release of cytochrome c from mitochondria and activation of caspase-3 confirmed that NaYF₄:Eu³⁺ NPs induced apoptosis was mitochondria damage-dependent.     

Machine learning for flow batteries: opportunities and challenges

With increased computational ability of modern computers, the rapid development of mathematical algorithms and the continuous establishment of material databases, artificial intelligence (AI) has shown tremendous potential in chemistry. Machine learning (ML), as one of the most important branches of AI, plays an important role in accelerating the discovery and design of key materials for flow batteries (FBs), and the optimization of FB systems. In this perspective, we first provide a fundamental understanding of the workflow of ML in FBs. Moreover, recent progress on applications of the state-of-art ML in both organic FBs and vanadium FBs are discussed. Finally, the challenges and future directions of ML research in FBs are proposed.

A fundamental workflow of ML in flow batteries and recent progress of the state-of-art ML applications in both organic FBs and vanadium FBs are discussed. The challenges and future directions of ML research in FBs are proposed.     

An ab initio evaluation of the role of p,π interaction: II. Molecules of the CH3COX series

The RHF/6-311G(d) and MP2/6-311G(d) calculations with full geometry optimization were performed for CH₃COX molecules (X = F, Cl, Br, CH₃). Variations in the populations of the p _y orbitals of their halogen and carbon atoms (orbitals whose symmetry axes are perpendicular to the molecular plane) from X = F to X = Cl, Br, and CH₃ are not associated with variations in the extent of the p,π conjugation between the lone electron pair of the halogen atom and the π-electron system of the carbonyl group. The bonding molecular orbitals formed by these atomic p _y orbitals are not determined by this interaction. The RHF/6-311G(d) and MP2/6-311G(d) calculations give similar results.     

Vibrational study of fluorobenzene and its solvation with methanol via polarized Raman measurements and quantum chemical calculations

Raman spectra of neat fluorobenzene (C₆H₅F, FB) and its binary mixtures with methanol (CH₃OH, M) at varying mole fractions of FB from 0.1 to 0.9 were recorded in order to understand the influence of intermolecular interaction on spectral features corresponding to some selected vibrational bands of FB in the region 1200-450 cm⁻¹. Only few vibrational bands of fluorobenzene show a significant change in their peak position in going from neat liquid to the complexes. The 803, 829 and 994 cm⁻¹ bands show blue shift upon complexation which indicates significant amount of charge transfer between the reference molecule and the solvent. However, the linewidths do not show any appreciable change. Density functional theory (DFT) calculations were performed employing B3LYP method and high level basis set 6-311++G(d,p) to obtain the ground state geometry of neat FB and its hydrogen bonded complexes with methanol in gas phase. In order to account for the solvent effect and also to realize a condition quite close to the experiment, polarizable continuum model (PCM) calculations considering bulk solvation as well as explicit (specific plus bulk) solvation approaches were also performed. A detailed vibrational assignment of the various normal modes has been performed on the basis of potential energy distribution (PED) calculations. Depolarization ratios for the different vibrational bands were calculated and the values match nicely with the depolarization ratio determined from the experimental data.     

An investigation on the reaction mechanism of the F2+Cl2→2ClF using the B3LYP method

The reaction mechanism of F₂+Cl₂→2ClF has been investigated with the density functional theory at the B3LYP/6‐311G* level. Six transition states have been found for the three possible reaction paths and verified by the normal mode vibrational and IRC analyses. Ab initio MP2/6‐311G* geometry optimizations and CCSD(T)/6‐311G(2df)//MP2/6‐311G* single‐point energy calculations have been performed for comparison. It is found that when the F₂ (or Cl₂) molecule decomposes into atoms first and then the F (or Cl) atom reacts with the molecule Cl₂ (or F₂) nearly along the molecular axis, the energy barrier is very low. The calculated energy barrier of F attacking Cl₂ is zero and that of Cl attacking F₂ is only 15.57 kJ?mol^?1 at the B3LYP level. However, the calculated dissociation energies of F₂ and Cl₂ are as high as 145.40 and 192.48 kJ?mol^?1, respectively. When the reaction proceeds through a bimolecular reaction mechanism, two four‐center transition states are obtained and the lower energy barrier is 218.69 kJ?mol^?1. Therefore, the title reaction F₂+Cl₂→2ClF is most probably initiated from the atomization of the F₂ molecule and terminated by the reaction of F attacking Cl₂ nearly along the Cl? Cl bond. MP2 calculations lead to the same conclusion, but the geometry of TS and the energy barrier are somewhat different. © 2002 John Wiley & Sons, Inc. Int J Quantum Chem, 2002     

Halogen switching of azacarbenes C2NH ground states at ab initio and DFT levels

Relative stabilities and singlet–triplet energy differences are calculated for 24 C₂NX azacarbenes (where X is H, F, Cl, and Br). Three skeletal arrangements are employed including azacyclopropenylidene, [(imino)methylene]carbene, and cyanocarbene. Halogens appear to alternate the electronic ground states of C₂NH azacarbenes, from triplet to singlet states, at MP3/6‐311++G**, B1LYP/6‐311++G**, B3LYP/6‐311++G**, MP2/6‐311++G**, MP4(SDTQ)/6‐311++G**, QCISD(T)/6‐311++G**, CCSD(T)/6‐311++G**, CCSD(T)/cc‐pVTZ, G1, and G2 levels of theory. The aromatic characters of singlet cyclic azacyclopropenylidenes are measured using GIAO–NICS calculations. Linear correlations are found between the B3LYP/6‐311++G** calculated LUMO–HOMO energy gaps (ΔE_{HOMO ‐ LUMO}) of the singlet carbenes versus their corresponding singlet–triplet energy separations (ΔE). Electrophilic characters are found for all singlet azacarbenes in their addition reactions to alkenes with the highest electrophilicity being exhibited for X = F. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:377–388, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20442     

Intramolecular Hypervalent X←X Interaction in Mono- and Bicyclic Heteroelement Compounds Containing Se and Te Atoms

Chalcogen-containing heterapentalene and quasimonocyclic compounds having SeÄSeÄSe and TeÄTeÄTe triads or SeÄSe and TeÄTe diads were studied by the ab initio [MP2(full)/6-31G**, MP2(fc)/6-31+G**, and MP2(fc)/LANL2DZ] and DFT methods (B3LYP/6-31G^**, B3LYP/6-31+G^**, and B3LYP/LANL2DZ). Heterapentalene compounds were found to be stable as planar bicyclic structures having a C _2v symmetry. The stability of quasimonocycic -chalcogenovinyl aldehydes increases with increase in the electron-acceptor power of the substituent at the X atom.     

Ab initio study on the reaction mechanism of ozone with bromine atom

Ab initio calculations of the potential energy surface (PES) for the Br+O₃ reaction have been performed using the MP2, CCSD(T), and QCISD(T) methods with 6‐31G(d), 6‐311G(d), and 6‐311+G(3df). The reaction begins with a transition state (TS) when the Br atom attacks a terminal oxygen of ozone, producing an intermediate, the bromine trioxide (M), which immediately dissociates to BrO+O₂. The geometry optimizations of the reactants, products, and intermediate and transition states are carried out at the MP2/6‐31G(d) level. The reaction potential barrier is 3.09 kcal/mol at the CCSD(T)/6‐311+G(3df)//MP2 level, which shows that the bromine atom trends intensively to react with the ozone. The comparison of the Br+O₃ reaction with the F+O₃ and Cl+O₃ reactions indicates that the reactions of ozone with the halogen atoms have the similar reaction mechanism. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Aqueous Flow Batteries: Research and Development

Flow batteries (FBs) have become a central topic recently, due to their promising prospect of addressing the issues of the random and intermittent nature of renewable energy sources. However, the successful industrialization of current FB systems is still limited by their relatively low energy densities and high cost. Research and development into novel aqueous FB systems with high energy density, high safety, and low cost are accordingly urgently required. Some novel aqueous FB systems have been explored in recent years to overcome issues of traditional FBs and vanadium FBs, in particular. Further modifications have also been made to improve their performance. In this review, appealing novel aqueous FB systems, such as zinc- and quinone-based FB systems, are reviewed, in terms of the operating principles, advantages, drawbacks, corresponding performance, and subsequent modifications. Moreover, recent investigations and advancements, and prospective research directions for novel aqueous FB systems, are summarized. Therefore, this review will provide guidance and perspectives for developing new aqueous FB systems.     

Development and Optimization of Djulis Sourdough Bread Fermented by Lactic Acid Bacteria for Antioxidant Capacity

This study developed a nutritionally valuable product with bioactive activity that improves the quality of bread. Djulis (Chenopodium formosanum), a native plant of Taiwan, was fermented using 23 different lactic acid bacteria strains. Lactobacillus casei BCRC10697 was identified as the ideal strain for fermentation, as it lowered the pH value of samples to 4.6 and demonstrated proteolysis ability 1.88 times higher than controls after 24 h of fermentation. Response surface methodology was adopted to optimize the djulis fermentation conditions for trolox equivalent antioxidant capacity (TEAC). The optimal conditions were a temperature of 33.5 °C, fructose content of 7.7%, and dough yield of 332.8, which yielded a TEAC at 6.82 mmol/kg. A 63% increase in TEAC and 20% increase in DPPH were observed when compared with unfermented djulis. Subsequently, the fermented djulis was used in different proportions as a substitute for wheat flour to make bread. The total phenolic and flavonoid compounds were 4.23 mg GAE/g and 3.46 mg QE/g, marking respective increases of 18% and 40% when the djulis was added. Texture analysis revealed that adding djulis increased the hardness and chewiness of sourdough breads. It also extended their shelf life by approximately 2 days. Thus, adding djulis to sourdough can enhance the functionality of breads and may provide a potential basis for developing djulis-based functional food.