A uniform doping ultra-thin SOI LDMOS with accumulation-mode extended gate and back-side etching technology

A uniform doping ultra-thin silicon-on-insulator(SOI) lateral-double-diffused metal-oxide-semiconductor(LDMOS)with low specific on-resistance(R_on,sp) and high breakdown voltage(BV) is proposed and its mechanism is investigated.The proposed LDMOS features an accumulation-mode extended gate(AG) and back-side etching(BE). The extended gate consists of a P– region and two diodes in series. In the on-state with VGD 0, an electron accumulation layer is formed along the drift region surface under the AG. It provides an ultra-low resistance current path along the whole drift region surface and thus the novel device obtains a low temperature distribution. The R_on,sp is nearly independent of the doping concentration of the drift region. In the off-state, the AG not only modulates the surface electric field distribution and improves the BV, but also brings in a charge compensation effect to further reduce the R_on,sp. Moreover, the BE avoids vertical premature breakdown to obtain high BV and allows a uniform doping in the drift region, which avoids the variable lateral doping(VLD) and the "hot-spot" caused by the VLD. Compared with the VLD SOI LDMOS, the proposed device simultaneously reduces the R_on,sp by 70.2% and increases the BV from 776 V to 818 V.     

Novel high-K with low specific on-resistance high voltage lateral double-diffused MOSFET

A novel voltage-withstand substrate with high-K (HK, k>3.9, k is the relative permittivity) dielectric and low specific on-resistance (R_on,sp) bulk-silicon, high-voltage LDMOS (HKLR LDMOS) is proposed in this paper. The high-K dielectric and highly doped interface N⁺-layer are made in bulk silicon to reduce the surface field drift region. The high-K dielectric can fully assist in depleting the drift region to increase the drift doping concentration (N_d) and reshape the electric field distribution. The highly doped N⁺-layer under the high-K dielectric acts as a low resistance path to reduce the R_on,sp. The new device with the high breakdown voltage (BV), the low R_on,sp, and the excellent figure of merit (FOM=BV²/R_on,sp) is obtained. The BV of HKLR LDMOS is 534 V, R_on,sp is 70.6 mΩ·cm², and FOM is 4.039 MW·cm^-2.     

Terminal-optimized 700-V LDMOS with improved breakdown voltage and ESD robustness

A novel terminal-optimized triple RESURF LDMOS(TOTR-LDMOS) is proposed and verified in a 0.25-μm bipolarCMOS-DMOS(BCD) process. By introducing a low concentration region to the terminal region, the surface electric field of the TOTR-LDMOS decreases, helping to improve the breakdown voltage(BV) and electrostatic discharge(ESD) robustness. Both traditional LDMOS and TOTR-LDMOS are fabricated and investigated by transmission line pulse(TLP) tests,direct current(DC) tests, and TCAD simulations. The results show that comparing with the traditional LDMOS, the BV of the TOTR-LDMOS increases from 755 V to 817 V without affecting the specific on-resistance(R_(on,sp)) of 6.99 ?·mm~2.Meanwhile, the ESD robustness of the TOTR-LDMOS increases by 147%. The TOTR-LDMOS exhibits an excellent performance among the present 700-V LDMOS devices.     

A low on-resistance triple RESURF SOI LDMOS with planar and trench gate integration

A low on-resistance(Ron,sp) integrable silicon-on-insulator(SOI) n-channel lateral double-diffused metal-oxide-semiconductor(LDMOS) is proposed and its mechanism is investigated by simulation.The LDMOS has two features:the integration of a planar gate and an extended trench gate(double gates(DGs));and a buried P-layer in the N-drift region,which forms a triple reduced surface field(RESURF)(TR) structure.The triple RESURF not only modulates the electric field distribution,but also increases N-drift doping,resulting in a reduced specific on-resistance(Ron,sp) and an improved breakdown voltage(BV) in the off-state.The DGs form dual conduction channels and,moreover,the extended trench gate widens the vertical conduction area,both of which further reduce the Ron,sp.The BV and Ron,sp are 328 V and 8.8 m.cm2,respectively,for a DG TR metal-oxide-semiconductor field-effect transistor(MOSFET) by simulation.Compared with a conventional SOI LDMOS,a DG TR MOSFET with the same dimensional device parameters as those of the DG TR MOSFET reduces Ron,sp by 59% and increases BV by 6%.The extended trench gate synchronously acts as an isolation trench between the high-voltage device and low-voltage circuitry in a high-voltage integrated circuit,thereby saving the chip area and simplifying the fabrication processes.     

高k介质电导增强SOI LDMOS机理与优化设计

本文提出一种高k介质电导增强SOI LDMOS新结构（HK CE SOI LDMOS）,并研究其机理. HK CE SOI LDMOS的特征是在漂移区两侧引入高k介质,反向阻断时,高k介质对漂移区进行自适应辅助耗尽,实现漂移区三维RESURF效应并调制电场,因而提高器件耐压和漂移区浓度并降低导通电阻. 借助三维仿真研究耐压、比导通电阻与器件结构参数之间的关系. 结果表明,HK CE SOI LDMOS与常规超结SOI LDMOS相比,耐压提高16%–18%,同时比导通电阻降低13%–20%,且缓解了由衬底辅助耗尽效应带来的电荷非平衡问题. 关键词： k介质')" href="#">高k介质 绝缘体上硅 (SOI) 击穿电压 比导通电阻     

Ultra-low specific on-resistance high-voltage vertical double diffusion metal–oxide–semiconductor field-effect transistor with continuous electron accumulation layer

A new ultra-low specific on-resistance(Ron,sp) vertical double diffusion metal–oxide–semiconductor field-effect transistor(VDMOS) with continuous electron accumulation(CEA) layer, denoted as CEA-VDMOS, is proposed and its new current transport mechanism is investigated. It features a trench gate directly extended to the drain, which includes two PN junctions. In on-state, the electron accumulation layers are formed along the sides of the extended gate and introduce two continuous low-resistance current paths from the source to the drain in a cell pitch. This mechanism not only dramatically reduces the Ron,sp but also makes the Ron,sp almost independent of the n-pillar doping concentration(Nn). In off-state, the depletion between the n-pillar and p-pillar within the extended trench gate increases the Nn, and further reduces the Ron,sp.Especially, the two PN junctions within the trench gate support a high gate–drain voltage in the off-state and on-state, respectively. However, the extended gate increases the gate capacitance and thus weakens the dynamic performance to some extent. Therefore, the CEA-VDMOS is more suitable for low and medium frequencies application. Simulation indicates that the CEA-VDMOS reduces the Ron,sp by 80% compared with the conventional super-junction VDMOS(CSJ-VDMOS)at the same high breakdown voltage(BV).     

A super-junction SOI-LDMOS with low resistance electron channel

A novel super-junction LDMOS with low resistance channel(LRC), named LRC-LDMOS based on the silicon-oninsulator(SOI) technology is proposed. The LRC is highly doped on the surface of the drift region, which can significantly reduce the specific on resistance(Ron,sp) in forward conduction. The charge compensation between the LRC, N-pillar,and P-pillar of the super-junction are adjusted to satisfy the charge balance, which can completely deplete the whole drift,thus the breakdown voltage(BV) is enhanced in reverse blocking. The three-dimensional(3 D) simulation results show that the BV and R_(on,sp) of the device can reach 253 V and 15.5 mΩ·cm~2, respectively, and the Baliga's figure of merit(FOM = BV~2/R_(on,sp)) of 4.1 MW/cm~2 is achieved, breaking through the silicon limit.     

A snapback-free TOL-RC-LIGBT with vertical P-collector and N-buffer design

A reverse-conducting lateral insulated-gate bipolar transistor(RC-LIGBT) with a trench oxide layer(TOL), featuring a vertical N-buffer and P-collector is proposed. Firstly, the TOL enhances both of the surface and bulk electric fields of the N-drift region, thus the breakdown voltage(BV) is improved. Secondly, the vertical N-buffer layer increases the voltage drop VPNof the P-collector/N-buffer junction, thus the snapback is suppressed. Thirdly, the P-body and the vertical N-buffer act as the anode and the cathode, respectively, to conduct the reverse current, thus the inner diode is integrated. As shown by the simulation results, the proposed RC-LIGBT exhibits trapezoidal electric field distribution with BV of 342.4 V, which is increased by nearly 340% compared to the conventional RC-LIGBT with triangular electric fields of 100.2 V. Moreover,the snapback is eliminated by the vertical N-buffer layer design, thus the reliability of the device is improved.     

Breakdown voltage improvement of LDMOSs by charge balancing: An inserted P-layer in trench oxide (IPT-LDMOS)

For the first time, the novel inserted P-layer in trench oxide of LDMOS structure (IPT-LDMOS) is proposed in which a trench oxide with inserted P-layer is considered in the drift region to improve the breakdown voltage. Our simulation with two dimensional ALTAS simulator shows that by determining the optimum doping concentration of the P-layer, the charges of the N-drift and P-layer regions would be balanced. Therefore, complete depletion at the breakdown voltage in the drift region happens. Also, electric field in the IPT-LDMOS is modified by producing additional peaks which decrease the common peaks near the drain and source junctions.     

背栅效应对SOI横向高压器件击穿特性的影响

提出一种SOI基背栅体内场降低BG REBULF(back-gate reduced BULk field)耐压技术. 其机理是背栅电压诱生界面电荷，调制有源区电场分布，降低体内漏端电场，提高体内源端电场，从而突破习用结构的纵向耐压限制，提高器件的击穿电压. 借助二维数值仿真，分析背栅效应对厚膜高压SOI LDMOS (>600V) 击穿特性的影响，在背栅电压为330V时，实现器件击穿电压1020V，较习用结构提高47.83%. 该技术的提出，为600V以上级SOI基高压功率器件和高压集成电路的实现提供了一种新的设计思路. 关键词： SOI 背栅 体内场降低 LDMOS     

Low Specific On-Resistance SOI LDMOS with Non-Depleted Embedded P-Island and Dual Trench Gate

A new silicon-on-insulator(SOI) trench lateral double-diffused metal oxide semiconductor(LDMOS) with a reduced specific on-resistance R_(on),sp is presented. The structure features a non-depleted embedded p-type island(EP) and dual vertical trench gate(DG)(EP-DG SOI). First, the optimized doping concentration of drift region is increased due to the assisted depletion effect of EP. Secondly, the dual conduction channel is provided by the DG when the EP-DG SOI is in the on-state. The increased optimized doping concentration of the drift region and the dual conduction channel result in a dramatic reduction in R_(on),sp. The mechanism of the EP is analyzed,and the characteristics of R_(on),sp and breakdown voltage(BV) are discussed. Compared with conventional trench gate SOI LDMOS, the EP-DG SOI decreases R_(on),sp by 47.1% and increases BV from 196 V to 212 V at the same cell pitch by simulation.     

Design and simulation of AlN-based vertical Schottky barrier diodes

The key parameters of vertical AlN Schottky barrier diodes(SBDs) with variable drift layer thickness(DLT) and drift layer concentration(DLC) are investigated. The specific on-resistance(R_(on,sp)) decreased to 0.5 m? · cm~2 and the breakdown voltage(V_(BR)) decreased from 3.4 kV to 1.1 kV by changing the DLC from 10~(15) cm~(-3) to 3×10~(16) cm~(-3). The VBRincreases from 1.5 kV to 3.4 kV and the Ron,sp also increases to 12.64 m? · cm~2 by increasing DLT from 4-μm to 11-μm. The VBRenhancement results from the increase of depletion region extension. The Baliga's figure of merit(BFOM) of3.8 GW/cm~2 was obtained in the structure of 11-μm DLT and 10~(16) cm~(-3) DLC without FP. When DLT or DLC is variable,the consideration of the value of BFOM is essential. In this paper, we also present the vertical AlN SBD with a field plate(FP), which decreases the crowding of electric field in electrode edge. All the key parameters were optimized by simulating based on Silvaco-ATLAS.     

A novel P-channel SOI LDMOS structure with non-depletion potential-clamped layer

A novel structure is proposed for doubling the vertical breakdown voltage of silicon-on-insulator(SOI) devices. In this new structure, the conventional buried oxide(BOX) in an SOI device is split into two sections: the source-section BOX and the drain-section BOX. A highly-doped Si layer, referred to as a non-depletion potential-clamped layer(NPCL), is positioned under and close to the two BOX sections. In the split BOXes and the Si region above the BOXes, the blocking voltage(BV) is divided into two parts by the NPCL. The voltage in the NPCL is clamped to be nearly half of the drain voltage. When the drain voltage approaches a breakdown value, the voltage sustained by the source-section BOX and the Si region under the source are nearly the same as the voltage sustained by the drain-section BOX and the Si region under the drain. The vertical BV is therefore almost doubled. The effectiveness of this new structure was verified for a P-channel SOI lateral double-diffused metal-oxide semiconductor(LDMOS) and can be applied to other high-voltage SOI devices. The simulation results show that the BV in an NPCL P-channel SOI LDMOS is improved by 55% and the specific on-resistance(Ron,sp) is reduced by 69% in comparison to the conventional structure.     

Modeling of a triple reduced surface field silicon-on-insulator lateral double-diffused metal–oxide–semiconductor field-effect transistor with low on-state resistance

An analytical model for a novel triple reduced surface field(RESURF) silicon-on-insulator(SOI) lateral doublediffused metal–oxide–semiconductor(LDMOS) field effect transistor with n-type top(N-top) layer, which can obtain a low on-state resistance, is proposed in this paper. The analytical model for surface potential and electric field distributions of the novel triple RESURF SOI LDMOS is presented by solving the two-dimensional(2D) Poisson's equation, which can also be applied to single, double and conventional triple RESURF SOI structures. The breakdown voltage(BV) is formulized to quantify the breakdown characteristic. Besides, the optimal integrated charge of N-top layer(Q_(ntop)) is derived, which can give guidance for doping the N-top layer. All the analytical results are well verified by numerical simulation results,showing the validity of the presented model. Hence, the proposed model can be a good tool for the device designers to provide accurate first-order design schemes and physical insights into the high voltage triple RESURF SOI device with N-top layer.     

Dual-gate lateral double-diffused metal—oxide semiconductor with ultra-low specific on-resistance

A new high voltage trench lateral double-diffused metal-oxide semiconductor (LDMOS) with ultra-low specific onresistance (R on,sp ) is proposed. The structure features a dual gate (DG LDMOS): a planar gate and a trench gate inset in the oxide trench. Firstly, the dual gate can provide a dual conduction channel and reduce R on,sp dramatically. Secondly, the oxide trench in the drift region modulates the electric field distribution and reduces the cell pitch but still can maintain comparable breakdown voltage (BV). Simulation results show that the cell pitch of the DG LDMOS can be reduced by 50% in comparison with that of conventional LDMOS at the equivalent BV; furthermore, R on,sp of the DG LDMOS can be reduced by 67% due to the smaller cell pitch and the dual gate.     

Improving breakdown voltage performance of SOI power device with folded drift region

A novel silicon-on-insulator(SOI) high breakdown voltage(BV) power device with interlaced dielectric trenches(IDT) and N/P pillars is proposed. In the studied structure, the drift region is folded by IDT embedded in the active layer,which results in an increase of length of ionization integral remarkably. The crowding phenomenon of electric field in the corner of IDT is relieved by the N/P pillars. Both traits improve two key factors of BV, the ionization integral length and electric field magnitude, and thus BV is significantly enhanced. The electric field in the dielectric layer is enhanced and a major portion of bias is borne by the oxide layer due to the accumulation of inverse charges(holes) at the corner of IDT.The average value of the lateral electric field of the proposed device reaches 60 V/μm with a 10 μm drift length, which increases by 200% in comparison to the conventional SOI LDMOS, resulting in a breakdown voltage of 607 V.     

A 4H-SiC merged P-I-N Schottky with floating back-to-back diode

A novel 4H-SiC merged P-I-N Schottky (MPS) with floating back-to-back diode (FBD), named FBD-MPS, is proposed and investigated by the Sentaurus technology computer-aided design (TCAD) and analytical model. The FBD features a trench oxide and floating P-shield, which is inserted between the P+/N-(PN) junction and Schottky junction to eliminate the shorted anode effect. The FBD is formed by the N-drift/P-shield/N-drift and it separates the PN and Schottky active region independently. The FBD reduces not only the V_turn to suppress the snapback effect but also the V_on at bipolar operation. The results show that the snapback can be completely eliminated, and the maximum electric field (E_max) is shifted from the Schottky junction to the FBD in the breakdown state.     

具有半绝缘多晶硅完全三维超结横向功率器件

为了突破传统LDMOS (lateral double-diffused MOSFET)器件击穿电压与比导通电阻的硅极限的2.5 次方关系, 降低LDMOS器件的功率损耗, 提高功率集成电路的功率驱动能力, 提出了一种具有半绝缘多晶硅SIPOS (semi-insulating poly silicon)覆盖的完全3 D-RESURF (three-dimensional reduced surface field)新型Super Junction-LDMOS结构(SIPOS SJ-LDMOS). 这种结构利用SIPOS的电场调制作用使SJ-LDMOS的表面电场分布均匀, 将器件单位长度的耐压量提高到19.4 V/μupm; 覆盖于漂移区表面的SIPOS使SJ-LDMOS沿三维方向均受到电场调制, 实现了LDMOS的完全3 D-RESURF效应, 使更高浓度的漂移区完全耗尽而达到高的击穿电压; 当器件开态工作时, 覆盖于薄场氧化层表面的SIPOS的电场作用使SJ-LDMOS的漂移区表面形成多数载流子积累, 器件比导通电阻降低. 利用器件仿真软件ISE分析获得, 当SIPOS SJ-LDMOS的击穿电压为388 V时, 比导通电阻为20.87 mΩ·cm², 相同结构参数条件下, N-buffer SJ-LDMOS的击穿电压为287 V, 比导通电阻为31.14 mΩ·cm²; 一般SJ-LDMOS 的击穿电压仅为180 V, 比导通电阻为71.82 mΩ·cm².     

Analysis of the breakdown mechanism for an ultra high voltage high-side thin layer silicon-on-insulator p-channel low-density metal-oxide semiconductor

This paper discusses the breakdown mechanism and proposes a new simulation and test method of breakdown voltage(BV) for an ultra-high-voltage(UHV) high-side thin layer silicon-on-insulator(SOI) p-channel lateral double-diffused metal-oxide semiconductor(LDMOS).Compared with the conventional simulation method,the new one is more accordant with the actual conditions of a device that can be used in the high voltage circuit.The BV of the SOI p-channel LDMOS can be properly represented and the effect of reduced bulk field can be revealed by employing the new simulation method.Simulation results show that the off-state(on-state) BV of the SOI p-channel LDMOS can reach 741(620) V in the 3-μm-thick buried oxide layer,50-μm-length drift region,and at 400 V back-gate voltage,enabling the device to be used in a 400 V UHV integrated circuit.     

Novel high-voltage power device based on self-adaptive interface charge

This paper presents a novel high-voltage lateral double diffused metal--oxide semiconductor (LDMOS) with self-adaptive interface charge (SAC) layer and its physical model of the vertical interface electric field. The SAC can be self-adaptive to collect high concentration dynamic inversion holes, which effectively enhance the electric field of dielectric buried layer (E_I) and increase breakdown voltage (BV). The BV and E_I of SAC LDMOS increase to 612 V and 600 V/μm from 204 V and 90.7 V/μm of the conventional silicon-on-insulator, respectively. Moreover, enhancement factors of η which present the enhanced ability of interface charge on E_I are defined and analysed.