Extraction properties of 25,27-bis(carbonylmethoxy)calix[4]arenes towards Sr2+: competitive extraction and extraction in a synthetic groundwater

The Sr²⁺ extraction properties of some 25,27-bis(carbonylmethoxy)calix[4]arenes, in which ester (–CH₂CO₂Et), keto (–CH₂COCH₃) and acid functionalities (–CH₂CO₂H) have been attached to the lower rim, are reported. Strontium ion extraction experiments were performed in a chloroform/water system, and the extraction performance analyzed by radiotracing using the short-lived radio nuclide ⁸⁵Sr. Effects of pH value, ligand to metal ratio, temperature, extraction time and strontium species on the extraction behavior were examined. It was observed that the 25,27-bis(carboxymethoxy)calix[4]arene derivatives are potent extracting agents towards the strontium ion, showing remarkable extraction performance in competition with a series of organic and inorganic impurities and in a synthetic groundwater. The crystal structure of 25,27-bis(acetonyloxy)calix[4]arene is also reported.     

Preorganization of diglycolamides on the calix[4]arene platform and its effect on the extraction of Am(III)/Eu(III)

Different diglycolamide (DGA)-substituted calix[4]arene-based extractants were synthesized and evaluated for the extraction of Am(III) and Eu(III), representative trivalent actinide and lanthanide ions, respectively. On the narrow rim of the calix[4]arene platform, the DGA moiety was either 1,3-di- or tetrasubstituted with a varying spacer length between the oxygen and amide nitrogen atom. In addition, DGA groups were appended both to the wide rim and to both rims of calix[4]arenes and their efficiencies were compared for Am(III) and Eu(III) extraction at three different feed acidities. The extraction and separation efficiencies strongly depended on the N-alkyl substituent as well as the spacer length. 1,3-Di-DGA-substituted calix[4]arenes are inferior extractants to the corresponding tetra-DGA-substituted ones. Narrow rim DGA-functionalized derivatives resulted in high extraction efficiencies, while the wide rim DGA-functionalized calix[4]arenes showed practically no extraction.     

Decorating Channel Walls in Metal–Organic Frameworks with Crown Ethers for Efficient and Selective Separation of Radioactive Strontium(II)

Nuclear accidents and the improper disposal of nuclear wastes have led to serious environmental radioactive pollutions. The rational design of adsorbents for the highly efficient separation of strontium(II) is essential in treating nuclear waste and recovering radioactive strontium resources. Metal–organic frameworks (MOFs) are potential materials for the separation of aqueous metal ions owing to their designable structure and tunable functionality. Herein, a novel 3D MOF material MOF-18Cr6, in which 1D channels are formed using 18-crown-6-ether-containing ligands as channel walls, is fabricated for strontium(II) separation. In contrast to traditional MOFs designed by grafting functional groups in the framework pores, MOF-18Cr6 possesses regular 18-crown-6-ether cavities on the channel walls, which not only can transport and intake strontium(II) via the channels, but also prevent blockage of the channels after the binding of strontium(II). Consequently, the functional sites are fully utilized to achieve a high strontium(II) removal rate of 99.73 % in simulated nuclear wastewater. This study fabricates a highly promising adsorbent for the separation of aqueous radioactive strontium(II), and more importantly, can provide a new strategy for the rational design of high-performance MOF adsorbents for separating target substances from complex aqueous environments.     

Some aspects of fundamental chemistry of the Universal Extraction (UNEX) process for the simultaneous separation of major radionuclides (cesium, strontium, actinides, and lanthanides) from radioactive wastes

Summary Scientists at the Idaho National Laboratory (INL) and Khlopin Radium Institute (KRI) collaboratively developed and validated the concept of a Universal Extraction (UNEX) process for simultaneously removing the major radionuclides (Cs, Sr, actinides, and lanthanides) from acidic radioactive waste in a single solvent extraction process. The process chemistry is unique and complicated, since the extractants, chlorinated cobalt dicarbollide (CCD), polyethylene glycol (PEG), and diphenyl-N,N-di-n-butylcarbamoylmethylphosphine oxide (Ph₂CMPO), operatesynergistically to extract the major radionuclides.A combination of classical chemistry techniques, infrared (IR) spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy were utilized to identify and explain the structures formed in the organic phase with protons or metal ions. Model systems, CCD-PEG and CCD-bidentate organophosphorus compounds were studied and possible structures of complexes, existing in the organic phase, are proposed and properties of the UNEX extractant are discussed.     

The effect of phenoxy oxygen atoms on extremely high extraction ability and less separation efficiency of trivalent rare earth elements with tetraphosphonic acid derivative of calix[4]arene

A cone confomational p-t-octylcalix[4]arene with four methylenephosphonic acids at the lower rim as well as its monomeric analog have been synthesized as a new extraction reagent to investigate the extraction behavior of the nine trivalent rare earth elements: Y, La, Pr, Nd, Sm, Eu, Gd, Ho and Er. The new calix[4]arene exhibited significantly higher extraction capacity than not only the monomeric derivative and the commercial extraction reagent, 2-ethylhexyl hydrogen 2-ethylhexylphosphonate, but also the cone conformational calix[4]arene extractants employed in our previous work, composed of a tetrapropylenephosphonic acid with a longer spacer, a tetraphosphonic acid at the upper rim, and tetraacetic acid at the lower rim. A dependence on the pH was observed for the new extractant in the highly acidic region, and the extraction took place via a simple ion-exchange mechanism. Using slope analysis, the stoichiometries of tetrameric and monomeric extractants to rare earth metal ions were determined to be 2:1 and 3:1, respectively. Using the proposed extraction equations, extraction equilibrium constants and separation factors were estimated. The extremely high extraction ability and moderate separation efficiency were attributed to the chelating effect of the phosphonic acid and the phenoxy oxygen atom. The effect of the phenoxy oxygen atom on extraction ability and separation efficiency of calix[4]arene derivatives was found to be significant.     

Synthesis and structure of Sr3GaN3 and Sr6GaN5: strontium gallium nitrides with isolated planar [GaN3]6- anions

Two new strontium gallium nitrides were obtained as single crystals by reaction in molten Na. Black Sr(3)GaN(3) is isostructural with its transition metal analogues, Sr(3)MnN(3), Ba(3)MnN(3), Sr(3)CrN(3), Ba(3)CrN(3), and Ba(3)FeN(3), and is the first example of a 313-ternary nitride containing only main group metals. It crystallizes in space group P6(3)/m (No. 176) with a = 7.584(2) A, c = 5.410(3) A, and Z = 2. Black Sr(6)GaN(5) is isostructural with Ca(6)GaN(5) and also with its transition metal analogues, Ca(6)MnN(5) and Ca(6)FeN(5). It crystallizes in space group P6(3)/mcm (No. 193) with a = 6.6667(6) A, c = 12.9999(17) A, and Z = 2. Both Ga compounds contain isolated planar [GaN(3)](6)(-) nitridometallate anions of D(3)(h)() symmetry.     

A New Family of Indoaniline-Derived Calix[4]arenes: Synthesis and Optical Recognition Properties as a Chromogenic Receptor(1)

A new family of indoaniline-derived calix[4]arenes has been synthesized for the purpose of developing a new chromogenic receptor. A condensing reaction of calix[4]arene (1) with 4-(diethylamino)-2-methylaniline hydrochloride (2) in the presence of an oxidizing agent under alkaline conditions affords mono- (3), 1,2-bis- (4), 1,3-bis- (5), and tetrakisindoaniline-derived (6) calix[4]arenes after careful column chromatography. Compound 3 is crystallized from a CHCl(3)-MeOH solution, and the crystal structure was determined by X-ray analysis. The crystal is monoclinic, space group P2(1)/n, Z = 4, a = 19.507(6) ?, b = 18.591(6) ?, c = 8.524(2) ?, beta = 94.69(2) degrees. The final R value for 2406 reflections of F(o) > 3sigma(F(o)) is 0.085. A unique intramolecular hydrogen-bonding network involving the carbonyl oxygen of indoaniline for 3 implied that the quinone carbonyl group as an acceptor of the chromophore can easily be subjected to an electrostatic interaction in the lower rim. Indeed, 1,3-bis(indoaniline)-derived 2,4-bis((ethoxycarbonyl)methoxy)calix[4]arene 7, prepared by the reaction of 5 with ethyl bromoacetate in the presence of NaH, is capable of undergoing an efficient ion-dipole interaction between the binding cation and the two quinone carbonyl groups of the chromophores, so that a selective Ca(2+)-induced pronounced color change (wavelength change > 100 nm) occurs with an association constant on the order of 10(6) in 99% EtOH, making 7 of potential use as an optical sensor for Ca(2+) detection. The IR and NMR studies have indicated that Ca(2+) is encapsulated in the cavity made by the distally located OCH(2)CO(2) groups on the lower rim of the cone-shaped calix[4]arene segment. Interestingly, however, the shape of the cavity in which Ca(2+) has been encapsulated does not have a C(2) axis of symmetry, as inferred from the (1)H-(1)H COSY experiment. On the other hand, 1,2-bis(indoaniline)-derived analogue 8 shows no response with metal ions, which can be interpreted to mean the absence of a cavity for encapsulation on the lower rim.     

Sorption of the long-lived radionuclides cesium-134, strontium-85 and cobalt-60 on bentonite

The sorption of long-lived radionuclides of cesium, strontium and cobalt (¹³⁴Cs, ⁸⁵Sr and ⁶⁰Co) on bentonite under various experimental conditions, such as contact time, pH, sorbent and sorbate concentrations have been studied. The uptake of Cs and Sr was rapid and equilibrium was reached almost instantaneously in both the cases, while Co sorption was time dependent. The sorption of these nuclides increased by increasing pH. The uptake of Cs, Sr and Co increased with increasing the amount of the bentonite clay. The percentage sorption for Cs, Sr and Co decreased with increasing metal concentrations. The desorption studies with 0.01M CaCl₂ and ground water at low-metal loadings on bentonite showed that about 95% of Cs, 85-90% of Sr and 97% of Co were irreversibly sorbed. These results could be helpful for nuclear waste management, for waste water effluents containing low concentrations of cesium, strontium and cobalt.     

Developments in heterobimetallic s-block systems: synthesis and structural survey of molecular M/Ae (M=Li, Na, K, Cs; Ae=Ca, Sr) aryloxo complexes

A series of novel heterobimetallic group 1/strontium and group 1/calcium aryloxo complexes having the composition [MAe(Odpp)3] [Ae=Sr and M=Na (1), K (2, 3), Cs (4); Ae=Ca and M=Na (5), K (6), Cs (7)] or [M2Ae(Odpp)4] [M=Li and Ae=Sr (9), Ca (10)] have been prepared using 2,6-diphenylphenol (HOdpp) as the ligand. Through the use of solid-state direct metalation, these compounds were obtained either directly from the reaction vessel or after workup in toluene. The Lewis base adduct [KCa(Odpp)3(thf)] (8) was obtained by treatment of [KCa(Odpp)3] (6) with tetrahydrofuran (thf). All of the compounds displayed extensive metal-pi-arene interactions, which provide significant stabilization in these reactive species. The thermal stabilities and volatilities of representative heterobimetallic strontium and calcium complexes were investigated using thermogravimetric analysis.     

Molybdocalixarene structure control via rim deprotonation. synthesis, characterization, and crystal structures of calix[4]arene Mo(VI) monooxo complexes and calix[4]arene alkali metal/Mo(VI) dioxo complexes

We report a series of calix[4]arene Mo(VI) dioxo complexes M2RC4MoO2 (M = alkali metal, R = H or Bu(t)) that were fully characterized by NMR, X-ray, IR, UV/vis, and elemental analysis. Molybdocalix[4]arene structures can be controlled via lower rim deprotonation, groups at para positions of calix[4]arene, and alkali metal counterions. Mono deprotonation at the lower rim leads to calix[4]arene Mo(VI) monooxo complexes RC4MoO (R = H, Bu(t), or allyl), and full deprotonation gives rise to calix[4]arene Mo(VI) dioxo complexes. Structural studies indicate that HC4 Mo(VI) dioxo complexes easily form polymeric structures via cation-pi interaction and coordination between different calixarene units. However, Bu(t)C4 Mo(VI) dioxo complexes tend to form dimers or tetramers due to steric hindrance of the tert-butyl groups at para positions in calixarene. The structures of the reduced side products A and C were determined by X-ray diffraction studies. The mechanism of RC4MoO formation from the reaction of calixarene monoanions with MoO2Cl2 appears to include the addition of a calixarene -OH group across a Mo=O bond.     

Beiträge zur Chemie des Hydrazins und seiner Derivate. XVII. Darstellung und Eigenschaften von Barium-, Strontium- und Calciumhydrazid

Barium, strontium and calcium hydrazide have been synthesised and characterised for the first time from the corresponding pernitrides Me₃N₄ (Me = Ba, Sr, Ca) and anhydrous hydrazine. Analytical and IR-spectroscopic studies show that these hydrazides have the composition Me(N? NH₂). Bariumhydrazile has also been obtained from barium or barium amide and anhydrous hydrazine, and strontium hydrazide from strontium and anhydrous hydrazine.     

Salen-type compounds of calcium and strontium

Salen complexes of the heavy alkaline-earth metals, calcium and strontium, were prepared by the reaction of various salen(t-Bu)H(2) ligands with the metals in ethanol. Six new calcium and strontium compounds, [Ca(salen(t-Bu))(HOEt)(2)(thf)] (1), [Ca(salen(t-Bu))(HOEt)(2)] (2), [Ca(salpen(t-Bu))(HOEt)(3)] (3), [Ca(salophen(t-Bu))(HOEt)(thf)] (4), [Sr(salen(t-Bu))(HOEt)(3)] (5), and [Sr(salophen(t-Bu))(HOEt)(thf)(2)] (6), were formed in this way with the quatridentate Schiff-base ligands N,N'-bis(3,5-di-tert-butylsalicylidene)ethylenediamine (salen(t-Bu)H(2)), N,N'-bis(3,5-di-tert-butylsalicylidene)-1,3-propanediamine (salpen(t-Bu)H(2)), and N,N'-o-phenylenebis(3,5-di-tert-butylsalicylideneimine (salophen(t-Bu)H(2)). Initially, ammonia solutions of the metals were combined with the salen(t-Bu)H(2) ligands, and in the reaction of strontium with salen(t-Bu)H(2), the unusual tetrametallic cluster [(OC(6)H(2)(t-Bu)(2)CHN(CH(2))(2)NH(2))Sr(mu(3)-salean(t-Bu)H(2))Sr(mu(3)-OH)](2) (7) was produced (salean(t-Bu)H(4) = N,N'-bis(3,5-di-tert-butyl-2-hydroxybenzyl)ethylenediamine). In this compound, the imine bonds of the salen(t-Bu)H(2) ligand were reduced to form the known ligands salean(t-Bu)H(4) and (HO)C(6)H(2)(t-Bu)(2)CHN(CH(2))(2)NH(2). Compounds 1, 5, 6, and 7 were structurally characterized by single-crystal X-ray diffraction. Crystal data for 1 (C(44)H(74)CaN(2)O(6)): triclinic space group P(-)1, a = 8.3730(10) A, b = 14.8010(10) A, c = 18.756(2) A, alpha = 72.551(10) degrees, beta = 81.795(10) degrees, gamma = 78.031(10) degrees, Z = 2. Crystal data for 5 (C(38)H(64)SrN(2)O(5)): monoclinic space group P2(1)/c, a = 23.634(3) A, b = 8.4660(10) A, c = 24.451(3) A, beta = 101.138(10) degrees, Z = 4. Crystal data for 6 (C(46)H(67)N(2)O(5)Sr): orthorhombic space group P2(1)2(1)2(1), a = 10.5590(2) A, b = 16.2070(3) A, c = 26.7620(6) A, Z = 4. Crystal data for 7 (C(98)H(156)N(8)O(8)Sr(4)): triclinic space group P(-)1, a = 14.667(1) A, b = 15.670(1) A, c = 18.594(2) A, alpha = 92.26(1) degrees, beta = 111.84(1) degrees, gamma = 117.12(1) degrees, Z = 4.     

The extraction behavior of some dicarbollylcobaltate crown extraction systems

The extraction of cesium, strontium and barium by a nitrobenzene solution of dicarbollylcobaltate in the presence of various crown ethers has been investigated and the influence of the substituent of crown to the extraction possibility has been observed. It has been found, that the addition of DB15C5, DB18C6 and DB21C7 (but not DB24C8 and DCH24C8) increases the distribution ratio of Cs by one order of magnitude. The fivemembered crowns are usually more efficient extractants for strontium than DCH18C6, which is widely used for strontium separation. The distribution ratio of strontium D_Sr decreases in the order 15-crown-5>benzo-15-crown-5>2-hydroxymethyl-15-crown-5>cyclohexyl-15-crown-5 >dibenzo-15-crown-5> nitrobenzo-15-crown-5. The selectivity α(Sr/Ca) decreases in the order 15C5>B15C5>DB15C5>2HM15C5>CH15C5. A selectivity factor α(Sr/Ca)≥1000 can be reached in the presence of 15C5 and B15C5. Six-membered and four-membered crowns extract strontium worse than most of the five-membered crowns. The selectivity factors α(Sr/Ca)≈100 have been reached for six-membered crowns and α(Sr/Ca)<1 has been found for 12C4. The extraction of barium by a nitrobenzene solution of dicarbollylcobaltate in the presence of 15C5 is even more efficient as the extraction of strontium. In that system D_Sr>10⁴ and D_Ba>10⁴ have been found for the extraction of Sr and Ba by a 0.01M nitrobenzene solution of dicarbollylcobaltate (c_B=0.01 mol/l) from 0.1M HNO₃. Maximal values of separation factor α(Ba/Sr) have been found in the system containing DB21C7.     

Metal(II) hexafluorophosphates(V) (M = Sr, Pb) containing XeF(2)-coordinated metal ions [M(XeF(2))(3)](PF(6))(2), [Pb(3)(XeF(2))(11)](PF(6))(6), and [Sr(3)(XeF(2))(10)](PF(6))(6)

From the system MF(2)/PF(5)/XeF(2)/anhydrous hydrogen fluoride (aHF), four compounds [Sr(XeF(2))(3)](PF(6))(2), [Pb(XeF(2))(3)](PF(6))(2), [Sr(3)(XeF(2))(10)](PF(6))(6), and [Pb(3)(XeF(2))(11)](PF(6))(6) were isolated and characterized by Raman spectroscopy and X-ray single-crystal diffraction. The [M(XeF(2))(3)](PF(6))(2) (M = Sr, Pb) compounds are isostructural with the previously reported [Sr(XeF(2))(3)](AsF(6))(2). The structure of [Sr(3)(XeF(2))(10)](PF(6))(6) (space group C2/c; a = 11.778(6) Angstrom, b = 12.497(6) Angstrom, c = 34.60(2) Angstrom, beta = 95.574(4) degrees, V = 5069(4) Angstrom(3), Z = 4) contains two crystallographically independent metal centers with a coordination number of 10 and rather unusual coordination spheres in the shape of tetracapped trigonal prisms. The bridging XeF(2) molecules and one bridging PF(6)- anion, which connect the metal centers, form complicated 3D structures. The structure of [Pb(3)(XeF(2))(11)](PF(6))(6) (space group C2/m; a = 13.01(3) Angstrom, b = 11.437(4) Angstrom, c = 18.487(7) Angstrom, beta = 104.374(9) degrees, V = 2665(6) Angstrom(3), Z = 2) consists of a 3D network of the general formula {[Pb(3)(XeF(2))(10)](PF(6))(6)}n and a noncoordinated XeF(2) molecule fixed in the crystal structure only by weak electrostatic interactions. This structure also contains two crystallographically independent Pb atoms. One of them possesses a unique homoleptic environment built up by eight F atoms from eight XeF(2) molecules in the shape of a cube, whereas the second Pb atom with a coordination number of 9 adopts the shape of a tricapped trigonal prism common for lead compounds. [Pb(3)(XeF(2))(11)](PF(6))(6) and [Sr(3)(XeF(2))(10)](PF(6))(6) are formed when an excess of XeF(2) is used during the process of the crystallization of [M(XeF(2))(3)](PF(6))(2) from their aHF solutions.     

Calcium,Strontium, and Barium Acetylides—New Evidence for Bending in the Structures of Heavy Alkaline Earth Metal Derivatives

An unprecedented ligand bending mode is displayed by the acetylide ligands in the first structurally characterized σ‐bound organometallic strontium and barium complexes [M([18]crown‐6)(CCSiPh₃)₂] (M=Sr, Ba). Furthermore, the observed decrease of the angle at the sp‐hybridized C atom on descending Group 2 (see structures depicted) affords new information that will lead to a better understanding of the bonding in alkaline earth metal compounds.     

Synthese,Struktur und Hydrolyse von Tetrakis(tetrahydropyran)strontium-bis[bis(dimethylisopropylsilyl)phosphanid]

Synthesis, Structures, and Hydrolysis of Tetrakis(tetrahydropyran)strontium Bis[bis(dimethylisopropylsilyl)phosphanide] The metalation of bis(dimethylisopropylsilyl)phosphane in tetrahydropyran with strontium bis[bis(trimethylsilyl)amide] yields almost quantitatively tetrakis(tetrahydropyran)strontium bis[bis(dimethylisopropylsilyl)phosphanide], which crystallizes in the monoclinic space group C2/c (a = 2340.71(1), b = 1028.74(1), c = 2186.02(1) pm, β = 91.03(1)°, Z = 4, wR₂ = 0.0759). The phosphanide ligands are in trans-positions and the P–Sr–P bond angle is found to be 168.5°. Partial hydrolysis of this compound leads to the formation of bis(dimethylsilylisopropylsilyl)phosphane and Sr₄O[P(SiMePr)₂]₆ with a central oxygen atom surrounded tetrahedrally by four alkaline earth metal atoms (monoclinic, space group C2/c, C2/c, a = 2265.83(6), b = 1702.11(5), c = 2462.46(9) pm, β = 91.34(1)°, Z = 4, wR₂ = 0.1057). The edges of the strontium tetrahedron are bridged by phosphanide ligands. The metal atoms are coordinated trigonal planarily by three phosphanide groups.     

杯芳烃酰胺类衍生物对金属离子的萃取性能

以吗啉和六氢吡啶修饰的四种对叔丁基杯[n]芳烃酰胺类衍生物(n=6,8)为萃取试剂,研究了它们对Na+,K+及部分过渡金属等十种金属离子的萃取作用.结果表明此类杯芳烃酰胺类衍生物对过渡金属离子有良好的选择性识别作用.其中,吗啉取代基修饰的杯[8]芳烃萃取效果最好.     

Distribution of Strontium in the System Water — Ca(NO3)2 — Nitrobenzene — Strontium Dicarbollylcobaltate — 18-crown-6

From several strontium distribution experiments with ⁸⁵Sr tracer, the extraction constant corresponding to the equilibrium Ca²⁺(aq)+SrL²⁺(nb) CaL²⁺(nb)+Sr²⁺ (aq) in the two-phase water-nitrobenzene system (L = 18-crown-6; aq = aqueous phase, nb = nitrobenzene phase) was tentatively evaluated as log K _ex (Ca²⁺,SrL²⁺) = –1.9±0.1. Furthermore, the stability constant of the calcium — 18-crown-6 complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log _nb(Cal²⁺) = 10.1±0.1.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

Pyrazole Based Mono‐ and Di‐Substituted Half Sandwich d6 Platinum Group Metal Complexes: Synthesis and Spectral Characterization

Reactions of pyrazole based ligand and halide bridged arene d⁶ metal precursors resulted a series of mono and di‐substituted pyrazole based half sandwich d⁶ metal complexes. In general, they are formulated as [(arene)MLCl₂] [M = Ru, arene = benzene ( 1 ), p‐cymene ( 2 ), arene = Cp*, M = Rh ( 3 ) and Ir ( 4 )] and [(arene)ML₂Cl] [M = Ru, arene = benzene ( 5 ), p‐cymene ( 6 ), arene = Cp*, M = Rh ( 7 ) and Ir ( 8 )]. All these complexes were characterized by various spectroscopic techniques (IR, ¹H NMR, ESI‐MS, and UV/Vis). The molecular structures were confirmed by single‐crystal X‐ray diffraction technique. Spectroscopic studies revealed that complexation i.e., mono‐ and di‐substitution occurred by the ratio‐based reaction between pyrazole ligand and metal precursor through the neutral nitrogen rather than protic nitrogen. In these complexes deprotonation of the protic nitrogen does not occur unlike the other complexes containing pyrazole derivatives, in which the pyrazole ligand is anionic.