Synthesis of Poly(phenyltriazolylcarboxylate)s with Aggregation‐Induced Emission Characteristics by Metal‐Free 1,3‐Dipolar Polycycloaddition of Phenylpropiolate and Azides

Two soluble poly(phenyltriazolylcarboxylate)s (PPTCs) with high molecular weights (M _w up to 26 800) are synthesized by the metal‐free 1,3‐dipolar polycycloadditions of 4,4′‐isopropylidenediphenyl diphenylpropiolate ( 1 ) and tetraphenylethene‐containing diazides ( 2 ) in dimethylformamide at 150 °C for 12 h in high yields (up to 93%). The resultant polymers are soluble in common organic solvents and are thermally stable with 5% weight loss temperatures higher than 375 °C. The PPTCs are nonemissive in solutions, but become highly luminescent upon aggregation, showing a phenomenon of aggregation‐induced emission. Their aggregates can be used as fluorescent chemosensors for high‐sensitivity detection of explosives.

     

Boron Diiminate with Aggregation‐Induced Emission and Crystallization‐Induced Emission‐Enhancement Characteristics

Organoboron complexes having aggregation‐ and crystalization‐induced emission properties are presented. The series of boron diiminates were synthesized and the emission behaviors of the synthesized compounds were investigated. Finally, it was found that significant enhancement of the emission depended on the crystallinity in the solid states.     

White‐Light Emission Strategy of a Single Organic Compound with Aggregation‐Induced Emission and Delayed Fluorescence Properties

A novel white‐light‐emitting organic molecule, which consists of carbazolyl‐ and phenothiazinyl‐substituted benzophenone (OPC) and exhibits aggregation‐induced emission‐delayed fluorescence (AIE‐DF) and mechanofluorochromic properties was synthesized. The CIE color coordinates of OPC were directly measured with a non‐doped powder, which presented white‐emission coordinates (0.33, 0.33) at 244 K to 252 K and (0.35, 0.35) at 298 K. The asymmetric donor–acceptor–donor′ (D‐A‐D′) type of OPC exhibits an accurate inherited relationship from dicarbazolyl‐substituted benzophenone (O2C, D‐A‐D) and diphenothiazinyl‐substituted benzophenone (O2P, D′‐A‐D′). By purposefully selecting the two parent molecules, that is, O2C (blue) and O2P (yellow), the white‐light emission of OPC can be achieved in a single molecule. This finding provides a feasible molecular strategy to design new AIE‐DF white‐light‐emitting organic molecules.     

Aggregation‐Induced Emission and Aggregation‐Promoted Photo‐oxidation in Thiophene‐Substituted Tetraphenylethylene Derivative

Aggregation‐induced emission combined with aggregation‐promoted photo‐oxidation has been reported only in two works quite recently. In fact, this phenomenon is not commonly observed for AIE‐active molecules. In this work, a new tetraphenylethylene derivative (TPE‐4T) with aggregation‐induced emission (AIE) and aggregation‐promoted photo‐oxidation was synthesized and investigated. The pristine TPE‐4T film exhibits strong bluish‐green emission, which turns to quite weak yellow emission after UV irradiation. Interestingly, after solvent treatment, the weakly fluorescent intermediate will become bright‐yellow emitting. Moreover, the morphology of the TPE‐4T film could be regulated by UV irradiation. The wettability of the TPE‐4T microcrystalline surface is drastically changed from hydrophobic to hydrophilic. This work contributes a new member to the aggregation induced photo‐oxidation family and enriches the photo‐oxidation study of tetraphenylethylene derivatives.     

Anthracene Modified by Aldehyde Groups Exhibiting Aggregation‐Induced Emission Properties

In order to get an easy way to achieve the transformation from aggregation‐caused quenching luminophores (ACQphores) to aggregation‐induced emission luminogens (AIEgens), we took aldehyde groups as the modifying group to decorate anthracene. The fluorescence performances of 9‐anthraldehyde (AnA) and 9,10‐anthracenedicarboxaldehyde (AnDA) in solution and aggregated state were studied. We found out that the aldehyde group can transform anthracene with aggregation‐caused quenching properties to AIEgen. The single‐crystal structures analysis of AnA and AnDA showed that their structure characteristics are responsible for the AIE properties of AnA and AnDA. On one hand, the aldehyde group can cause steric effects to lower intermolecular π‐π packing style in aggregated state. On the other hand, intermolecular H‐bonding interactions can restrict the intramolecular rotation and suppress internal charge transfer. These results may supply a new simple method for the transformation from ACQphores to AIEgens on the point of the molecular design.     

New Aggregation‐Induced Emitters: Tetraphenyldistyrylbenzenes

The synthesis of five novel distyrylbenzene (DSB) derivatives, featuring a central tetraphenylbenzene core, is reported. The targets show aggregation‐induced emission (AIE), which, however, is substituent‐dependent. For the pure hydrocarbon and derivatives that do not carry (+M) or (?M) substituents, classic AIE behavior is observed, that is, the DSBs are non‐fluorescent in solution, but are highly fluorescent in cold matrices, upon aggregate formation in poor solvents and in the solid, crystalline state. If aldehyde or dibutylamino groups are attached in the para‐position of the DSB unit, non‐classic AIE‐phores result. These are fluorescent both in dilute solution as well as in the solid state. Prolonged irradiation of the targets leads to benzotetraphene derivatives by a double cyclization.     

Coordination‐Driven Self‐Assembly of Carbazole‐Based Metallodendrimers with Generation‐Dependent Aggregation‐Induced Emission Behavior

A new family of 120° carbazole‐based dendritic donors D1 – D3 have been successfully designed and synthesized, from which a series of novel supramolecular carbazole‐based metallodendrimers with well‐defined shapes and sizes were successfully prepared by [2+2] and [3+3] coordination‐driven self‐assembly. The structures of newly designed rhomboidal and hexagonal metallodendrimers were characterized by multinuclear NMR (¹H and ³¹P) spectroscopy, ESI‐TOF mass spectrometry, FTIR spectroscopy, and the PM6 semiempirical molecular orbital method. The fluorescence emission behavior of ligands D1 – D3 , rhomboidal metallodendrimers R1 – R3 , and hexagonal metallodendrimers H1 – H3 in mixtures of dichloromethane and n‐hexane with different n‐hexane fractions were investigated. The results indicated that D1 – D3 featured typical aggregation‐induced emission (AIE) properties. However, different from ligands D1 – D3 , metallodendrimers R1 – R3 and H1 – H3 presented interesting generation‐dependent AIE properties. Furthermore, evidence for the aggregation of these metallodendrimers was confirmed by a detailed investigation of dynamic light‐scattering, Tyndall effect, and SEM. This research not only provides a highly efficient strategy for constructing carbazole‐based dendrimers with well‐defined shapes and sizes, but also presents a new family of carbazole‐based dendritic ligands and rhomboidal and hexagonal metallodendrimers with interesting AIE properties.     

Photoactivatable Aggregation‐Induced Emission Fluorophores with Multiple‐Color Fluorescence and Wavelength‐Selective Activation

Photoactivatable (caged) fluorophores are widely used in chemistry, materials, and biology. However, the development of such molecules exhibiting photoactivable solid‐state fluorescence is still challenging due to the aggregation‐caused quenching (ACQ) effect of most fluorophores in their aggregate or solid states. In this work, we developed caged salicylaldehyde hydrazone derivatives, which are of aggregation‐induced emission (AIE) characteristics upon light irradiation, as efficient photoactivatable solid‐state fluorophores. These compounds displayed multiple‐color emissions and ratiometric (photochromic) fluorescence switches upon wavelength‐selective photoactivation, and were successfully applied for photopatterning and photoactivatable cell imaging in a multiple‐color and stepwise manner.     

Aggregation‐Induced Emission Rotors: Rational Design and Tunable Stimuli Response

A novel molecular design strategy is provided to rationally tune the stimuli response of luminescent materials with aggregation‐induced emission (AIE) characteristics. A series of new AIE‐active molecules (AIE rotors) are prepared by covalently linking different numbers of tetraphenylethene moieties together. Upon gradually increasing the number of rotatable phenyl rings, the sensitivity of the response of the AIE rotors to viscosity and temperature is significantly enhanced. Although the molecular size is further enlarged, the performance is only slightly improved due to slightly increased effective rotors, but with largely increased rotational barriers. Such molecular engineering and experimental results offer more in‐depth insight into the AIE mechanism, namely, restriction of intramolecular rotations. Notably, through this rational design, the AIE rotor with the largest molecular size turns out to be the most viscosensitive luminogen with a viscosity factor of up to 0.98.     

Restriction of Intramolecular Motions: The General Mechanism behind Aggregation‐Induced Emission

Aggregation‐induced emission (AIE) has been harnessed in many systems through the principle of restriction of intramolecular rotations (RIR) based on mechanistic understanding from archetypal AIE molecules such as tetraphenylethene (TPE). However, as the family of AIE‐active molecules grows, the RIR model cannot fully explain some AIE phenomena. Here, we report a broadening of the AIE mechanism through analysis of 10,10′,11,11′‐tetrahydro‐5,5′‐bidibenzo[a,d][7]annulenylidene (THBDBA), and 5,5′‐bidibenzo[a,d][7]annulenylidene (BDBA). Analyses of the computational QM/MM model reveal that the novel mechanism behind the AIE of THBDBA and BDBA is the restriction of intramolecular vibration (RIV). A more generalized mechanistic understanding of AIE results by combining RIR and RIV into the principle of restriction of intramolecular motions (RIM).     

Decomposition‐Assembly of Tetraphenylethylene Nanoparticles With Uniform Size and Aggregation‐Induced Emission property

Tetraphenylethylene (TPE)‐substituted poly(allylamine hydrochloride) (PAH‐g‐TPE) is synthesized by a Schiff base reaction between PAH and TPE‐CHO. The PAH‐g‐TPE forms micelles in water at pH 6, which are further transformed into pure TPE‐CHO nanoparticles (NPs) with a diameter of ≈300 nm after incubation in a solution of low pH value. In contrast, only amorphous precipitates are obtained when TPE‐CHO methanol solution is incubated in water. The aggregation‐induced emission feature of the TPE molecule is completely retained in the TPE NPs, which can be internalized into cells and show blue fluorescence. Formation mechanism of the TPE NPs is proposed by taking into account the guidance effect of linear and charged PAH molecules, and the propeller‐stacking manner between the TPE‐CHO molecules.     

Unusual Aggregation‐Induced Emission of a Coumarin Derivative as a Result of the Restriction of an Intramolecular Twisting Motion

Aggregation‐induced emission (AIE) is commonly observed for propeller‐like luminogens with aromatic rotors and stators. Herein, we report that a coumarin derivative containing a seven‐membered aliphatic ring (CD‐7) but no rotors showed typical AIE characteristics, whereas its analogue with a five‐membered aliphatic ring (CD‐5) exhibited an opposite aggregation‐caused quenching (ACQ) effect. Experimental and theoretical results revealed that a large aliphatic ring in CD‐7 weakens structural rigidity and promotes out‐of‐plane twisting of the molecular backbone to drastically accelerate nonradiative excited‐state decay, thus resulting in poor emission in solution. The restriction of twisting motion in aggregates blocks the nonradiative decay channels and enables CD‐7 to fluoresce strongly. The results also show that AIE is a general phenomenon and not peculiar to propeller‐like molecules. The AIE and ACQ effects can be switched readily by the modulation of molecular rigidity.     

Fluorescent Polymeric Micelles with Aggregation‐Induced Emission Properties for Monitoring the Encapsulation of Doxorubicin

A new type of fluorescent polymeric micelles is developed by self‐assembly from a series of amphiphilic block copolymers, poly(ethylene glycol)‐b‐poly[styrene‐co‐(2‐(1,2,3,4,5‐pentaphenyl‐1H‐silol‐1‐yloxy)ethyl methacrylate)] [PEG‐b‐P(S‐co‐PPSEMA)]. Their capability of loading doxorubicin (DOX) is investigated by monitoring the loading content, encapsulation efficiency, and photophysical properties of micelles. Förster resonance energy transfer from PPSEMA to DOX is observed in DOX‐loaded micelles, which can serve as an indication of successful encapsulation of DOX in these micelles. The application of this new type of fluorescent polymeric micelles as a fluorescent probe and an anticancer drug carrier simultaneously is explored by studying the intracellular uptake of DOX‐loaded micelles.

     

A Fluorogenic Probe with Aggregation‐Induced Emission Characteristics for Carboxylesterase Assay through Formation of Supramolecular Microfibers

Herein, we report a novel fluorescent “light‐up” probe useful for carboxylesterase assay that is based on a tetraphenylethylene derivative containing carboxylic ester groups. The specific cleavage of the carboxylic ester bonds by carboxylesterase results in the generation of a relatively hydrophobic moiety that self‐assembles into supramolecular microfibers, thus giving rise to “turn‐on” fluorescent signals. A high sensitivity towards carboxylesterase was achieved with a detection limit as low as 29 pM , which is much lower than the corresponding assays based on other fluorescent approaches.     

Fluorescence Detection of Microcapsule‐Type Self‐Healing,Based on Aggregation‐Induced Emission

An extrinsic self‐healing coating system containing tetraphenylethylene (TPE) in microcapsules was monitored by measuring aggregation‐induced emission (AIE). The core healing agent comprised of methacryloxypropyl‐terminated polydimethylsiloxane, styrene, benzoin isobutyl ether, and TPE was encapsulated in a urea‐formaldehyde shell. The photoluminescence of the healing agent in the microcapsules was measured that the blue emission intensity dramatically increased and the storage modulus also increased up to 10⁵ Pa after the photocuring. These results suggested that this formulation might be useful as a self‐healing material and as an indicator of the self‐healing process due to the dramatic change in fluorescence during photocuring. To examine the ability of the healing agent to repair damage to a coating, a self‐healing coating containing embedded microcapsules was scribed with a razor. As the healing process proceeded, blue light fluorescence emission was observed at the scribed regions. This observation suggested that self‐healing could be monitored using the AIE fluorescence.

     

Synthesis and Design of Aggregation‐Induced Emission Surfactants: Direct Observation of Micelle Transitions and Microemulsion Droplets

The direct visualization of micelle transitions is a long‐standing challenge owing to the intractable aggregation‐caused quenching of light emission in the micelle solution. Herein, we report the synthesis of a surfactant with a tetraphenylethene (TPE) core and aggregation‐induced emission (AIE) characteristics. The transition processes of surfactant micelles and the microemulsion droplets (MEDs) formed by the surfactant with a TPE core were clearly visualized by a high‐contrast fluorescence imaging method. The fluorescence intensity of the MEDs decreased as the size of MEDs increased as a result of weakening of the restriction of intramolecular rotation (RIR). The results of this study deepen our understanding of micelle‐transition processes and provide solid evidence in favor of the hypothesis that the AIE phenomenon has its origin in the RIR of fluorophores in the aggregate state.