两类三组份反应产物：1,3-恶嗪及嘧啶-2-酮类化合物的质谱学行为研究

电喷雾质谱被应用于分辨2-氨基-1,3-恶嗪及六氢化-4-苯基-吡喃[2,3-d]嘧啶-2-酮的杂环结构。两类化合物均为三组份反应的产物,且其杂环的结构很难用NMR判断。实验首次系统研究了两类化合物的质谱学行为（包括氘代实验和高分辨质谱研究）,发现前者在CID实验中丢失CH2N2和HCNO,而后者为直接丢失尿素。这些特征丢失为该类衍生物的结构判断,尤其是高通量的合成产物分析提供了重要的依据。     

Synthesis of [3,3′(4H,4′H)‐Bi‐2H‐1,3‐oxazine]‐4,4′‐diones and Their Hydrolysis

The [3,3′(4H,4′H)‐bi‐2H‐1,3‐oxazine]‐4,4′‐diones 3a – 3i were obtained by [2+4] cycloaddition reactions of furan‐2,3‐diones 1a – 1c with aromatic aldazines 2a – 2d (Scheme 1). So, new derivatives of bi‐2H‐1,3‐oxazines and their hydrolysis products, 3,5‐diaryl‐1H‐pyrazoles 4a – 4c (Scheme 3), which are potential biologically active compounds, were synthesized for the first time.     

Stereospecific Synthesis of β‐Lactams from Heterocyclic Imines Using the Staudinger Reaction

The reactions of the heterocyclic imines 5,6‐dihydro‐2H‐[1,3]oxazines and 2H‐1,4‐benzothiazines with different substituted acetyl chlorides in the presence of triethylamine forming β‐lactams were examined focusing on the stereochemistry of the Staudinger reaction.     

New Approaches to the Synthesis of 4‐(2‐Aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones and 3‐Ureidoindoles and a Study of Their Interconversion

3‐Alkyl/aryl‐3‐ureido‐1H,3H‐quinoline‐2,4‐diones ( 2 ) and 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) react in boiling concentrated HCl to give 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ). The same compounds were prepared by the same procedure from 2‐alkyl/aryl‐3‐ureido‐1H‐indoles ( 4 ), which were obtained from the reaction of 3‐alkyl/aryl‐3‐aminoquinoline‐2,4(1H,3H)‐diones ( 1 ) with 1,3‐diphenylurea or by the transformation of 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) and 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ) in boiling AcOH. The latter were converted into 1,3‐bis[2‐(2‐oxo‐2,3‐dihydro‐1H‐imidazol‐4‐yl)phenyl]ureas ( 5 ) by treatment with triphosgene. All compounds were characterized by ¹H‐ and ¹³C‐NMR and IR spectroscopy, as well as atmospheric pressure chemical‐ionisation mass spectra.     

Reactions of Imidoyl Isoselenocyanates with Aromatic 2‐Amino N‐Heterocycles and 1‐Methyl‐1H‐imidazole

The reaction of N‐phenylimidoyl isoselenocyanates 1 with 2‐amino‐1,3‐thiazoles 10 in acetone proceeded smoothly at room temperature to give 4H‐1,3‐thiazolo[3,2‐a] [1,3,5]triazine‐4‐selones 13 in fair yields (Scheme 2). Under the same conditions, 1 and 2‐amino‐3‐methylpyridine ( 11 ) underwent an addition reaction, followed by a spontaneous oxidation, to yield the 3H‐4λ⁴‐[1,2,4]selenadiazolo[1′,5′:1,5] [1,2,4]selenadiazolo[2,3‐a]pyridine 14 (Scheme 3). The structure of 14 was established by X‐ray crystallography (Fig. 1). Finally, the reaction of 1‐methyl‐1H‐imidazole ( 12 ) and 1 led to 3‐methyl‐1‐(N‐phenylbenzimidoyl)‐1H‐imidazolium selenocyanates 15 (Scheme 4). In all three cases, an initially formed selenourea derivative is proposed as an intermediate.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Temperature‐induced solid‐to‐solid transformation in helical homochiral coordination polymers

The reactions of (R)‐ and (S)‐4‐(1‐carboxyethoxy)benzoic acid (H₂CBA) with 1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene (1,3‐BMIB) ligands afforded a pair of homochiral coordination polymers (CPs), namely, poly[[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(S)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)] monohydrate], {[Zn(C₁₀H₈O₅)(C₁₄H₁₄N₄)]·H₂O}_n or {[Zn{(S)‐CBA}(1,3‐BMIB)]·H₂O}_n ( 1‐L ), and poly[[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(R)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)] monohydrate] ( 1‐D ). Three kinds of helical chains exist in compounds 1‐D and 1‐L , which are constructed from Zn^II atoms, 1,3‐BMIB ligands and/or CBA^2? ligands. When the as‐synthesized crystals of 1‐L and 1‐D were further heated in the mother liquor or air, poly[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(S)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)], [Zn(C₁₀H₈O₅)(C₁₄H₁₄N₄)]_n or [Zn{(S)‐CBA}(1,3‐BMIB)]_n ( 2‐L ), and poly[[μ‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene][μ‐(R)‐4‐(1‐carboxylatoethoxy)benzoato]zinc(II)] ( 2‐D ) were obtained, respectively. The single‐crystal structure analysis revealed that 2‐L and 2‐D only contained one type of helical chain formed by Zn^II atoms and 1,3‐BMIB and CBA^2? ligands, which indicated that the helical chains were reconstructed though solid‐to‐solid transformation. This result not only means the realization of helical transformation, but also gives a feasible strategy to build homochiral CPs.     

A Facile Synthesis of Oxoindenothiazine and Dioxospiro(indene‐2,4′‐thiazine) Derivatives from (Substituted ethylidene)hydrazinecarbothioamides

(E)‐2‐[2‐(1‐Substituted ethylidene)hydrazinyl]‐5‐oxo‐9b‐hydroxy‐5,9b‐dihydroindeno[1,2‐d][1,3]‐thiazine‐4‐carbonitriles and (E)‐5‐oxo‐[(E)‐(1‐substituted ethylidene)hydrazinyl]‐2,5‐dihydroindeno[1,2‐d][1,3]thiazine‐4‐carbonitriles have been obtained from the reaction of 2‐(substituted ethylidene)hydrazinecarbothioamides with 2‐(1,3‐dioxo‐2,3‐dihydro‐1H‐inden‐2‐ylidene)propanedinitrile ( 1 ) in ethyl acetate solution. However, (Z)‐6′‐amino‐1,3‐dioxo‐3′‐substituted‐2′‐[(E)‐(1‐phenylethylidene)hydrazono]‐1,2′,3,3′‐tetrahydrospiro(indene‐2,4′‐[1,3]thiazine)‐5′‐carbonitriles were observed during the reaction of N‐substituted‐2‐(1‐phenylethylidene)hydrazinecarbothioamides with ( 1 ). The structure assignment of products has been confirmed on the basis of ¹H‐, ¹³C‐NMR, and mass spectrometry, as well as theoretical calculations.     

HClO4‐SiO2: An Efficient and Useful Catalyst for the Synthesis of 3‐Aryl‐2H‐benzo[1,4]oxazine

HClO₄‐SiO₂, efficiently catalyzed the condensation of o‐aminophenols and 2‐bromo‐1‐aryl‐ethanones to yield 3‐aryl‐2H‐benzo[1,4]oxazines in good yields.     

Diastereoselective synthesis of dispirooxindoline fused [1,3]oxazines via Diels–Alder reaction of functionalized 1,2-dihydropyridines with (E)-1,3-dihydro-3-phenacylidene-2H-indol-2-ones

An efficient synthetic procedure for the complex dispirooxindoline fused [1,3]oxazines was successfully developed via Diels–Alder reaction of (E)-1,3-dihydro-3-phenacylidene-2H-indol-2-ones with 1,2-dihydro-2-oxospiro[3H-indole-3,2′-[2H,9aH-pyrido[2,1-b][1,3]oxazines], which were obtained from three-component reactions of pyridine and isatins with acetylenedicarboxylate or propiolate. ¹H NMR data and single crystal structures indicated that this reaction has both high regioselectivity and diastereoselectivity.     

Modified Riemschneider Reaction of 3‐Thiocyanatoquinolinediones

The Riemschneider reaction of 3‐thiocyanatoquinoline‐2,4(1H,3H)‐diones with conc. H₂SO₄ was investigated. Using different reaction conditions, 13 types of reaction products were isolated. Compounds bearing a Me, Et, or Bu group at C(3) afforded mainly [1,3]thiazolo[5,4‐c]quinoline‐2,4‐diones and 1,9b‐dihydro‐9b‐hydroxythiazolo[5,4‐c]quinoline‐2,4‐diones. In the case of the 3‐Bu derivatives of the starting compounds, C‐debutylation was also observed. If a Bn group is present at C(3), rapid C‐debenzylation of the starting thiocyanates occurred, yielding [1,3]oxathiolo[4,5‐c]quinoline‐2,4‐diones, and mixtures of mono‐, di‐, and trisulfides derived from 4‐hydroxy‐3‐sulfanylquinoline‐2‐ones. The reaction mechanism of all of the transformations is discussed. All new compounds were characterized by IR, ¹H‐ and ¹³C‐NMR, and EI and ESI mass spectra, and in some cases, ¹⁵N‐NMR spectra were also used to characterize new compounds.     

Three‐Component Reaction for Construction of Spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and Spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines]

The three‐component reaction of thiazole (benzothiazole), dialkyl but‐2‐ynedioate, and isatinylidene malononitriles in toluene at 110–120°C in a sealed tube afforded a mixture of cis/trans‐isomers of functionalized diastereoisomeric spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines] in good yields. Both cis‐isomers and trans‐isomers were successfully separated out and fully characterized with spectroscopy and single crystal determination. Under similar conditions, the three‐component reaction containing 2‐(1,3‐dioxo‐1H‐inden‐2(3H)‐ylidene)malononitrile resulted in spiro[indene‐2,7′‐thiazolo[3,2‐a]pyridine] derivatives.     

Two new isostructural mercury(II) complexes involving the N‐heterocyclic 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole ligand: syntheses,structures and properties

The unsymmetrical N‐heterocyclic ligand 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole (bmi) has three potential N‐atom donors and can act in monodentate or bridging coordination modes in the construction of complexes. In addition, the bmi ligand can adopt different coordination conformations, resulting in complexes with different structures due to the presence of the flexible methylene spacer. Two new complexes, namely bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}dibromidomercury(II), [HgBr₂(C₁₀H₉N₅)₂], and bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}diiodidomercury(II), [HgI₂(C₁₀H₉N₅)₂], have been synthesized through the self‐assembly of bmi with HgBr₂ or HgI₂. Single‐crystal X‐ray diffraction shows that both complexes are mononuclear structures, in which the bmi ligands coordinate to the Hg^II ions in monodentate modes. In the solid state, both complexes display three‐dimensional networks formed by a combination of hydrogen bonds and π–π interactions. The IR spectra and PXRD patterns of both complexes have also been recorded.     

One‐pot,fast cyclopropanation reaction of indandione with various aldehydes in the presence of cyanogen bromide and trimethylamine

A new, fast, and easy one‐pot cyclopropanation reaction of aromatic and aliphatic aldehydes with 1H‐indene‐1,3(2H)‐dione and cyanogen bromide (BrCN) was developed for synthesizing 3′‐(aryl[alkyl])‐dispiro[indan‐2,1′‐cyclopropane‐2′,2′′‐indan]‐1,1′′,3,3′′‐tetrone in excellent yields in a short time (about 15 s) under basic media. All structures were characterized using IR, ¹H NMR, and ¹³C NMR spectroscopy techniques.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.     

Synthesis and Characterization of New 3‐(3‐Hydroxyphenyl)‐4‐ alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione Compounds

A series of 3‐(3‐hydroxyphenyl)‐4‐alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione compounds with general formula C_nH_2n+1CNO(CO)₂C₆H₄(C₆H₄OH) in which n are even parity numbers from 2 to 18. The structure determinations on these compounds were performed by FT‐IR spectroscopy which indicated that the terminal alkyl chain attached to the oxazepine ring was fully extended. Conformational analysis in DMSO at ambient temperature was carried out for the first time via high resolution ¹H NMR and ¹³C NMR spectroscopy.     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Synthesis,Interionic Structure,and Reactivity toward CO and p‐Methylstyrene of Palladacyclic Compounds Bearing α‐Diimine Ligands

Palladacyclic compounds [Pd(C₆H₄(C₆H₅C?O)C?N? R)(N? N)] [X] (R = Et, ⁱPr, 2,6‐ⁱPr₂C₆H₃; N? N = bpy = 2,2′‐bipyridine, or 1,4‐(o,o′‐dialkylaryl)‐1,4‐diazabuta‐1,3‐dienes; [X]^? = [BF₄]^? or [PF₆]^?) were synthesized from the dimers [{Pd(C₆H₄(C₆H₅C?O)C?N? R)(μ‐Cl)}₂] and N? N ligands. Their interionic structure in CD₂Cl₂ was determined by means of ¹⁹F,¹H‐HOESY experiments and compared with that in the solid state derived from X‐ray single‐crystal studies. [Pd(C₆H₄(C₆H₅C?O)C?N? R)(N? N)] [X] complexes were found to copolymerize CO and p‐methylstyrene affording syndiotactic or isotactic copolymers when bpy or 1,4‐(o,o′‐dimethylaryl)‐1,4‐diazabuta‐1,3‐dienes were used, respectively. The reactions with CO and p‐methylstyrene of the bpy derivatives were investigated. Two intermediates derived from a single and a double insertion of CO into the Pd? C bonds were isolated and completely characterized in solution.     

Conformational Studies of (±)‐11,12‐Didehydro‐11‐deoxycorynoline and (+)‐11,13‐Didehydro‐11‐deoxychelidonine,Hexahydrobenzo[c]phenanthridine‐Type Alkaloid Derivatives,by X‐Ray Crystal Structure and NMR Analyses

The X‐ray crystal analyses of the two 11‐deoxy‐didehydrohexahydrobenzo[c]phenanthridine‐type alkaloid derivatives 3 and 4 , derived from (±)‐corynoline ( 1 ) and (+)‐chelidonine ( 2 ), established their structures as (±)‐(5bRS,12bRS)‐5b,12b,13,14‐tetrahydro‐5b,13‐dimethyl[1,3]benzodioxolo[5,6‐c]‐1,3‐dioxolo[4,5‐i]phenanthridine ( 3 ) and (+)‐rel‐(12bR)‐7,12b,13,14‐tetrahydro‐13‐methyl[1,3]benzodioxolo[5,6‐c]‐1,3‐dioxolo[4,5‐i]phenanthridine ( 4 ). The conformations of 3 and 4 in CDCl₃ were determined on the basis of ¹H‐ and ¹³C‐NMR spectroscopy.     

Synthesis of New Bis‐imidazole Derivatives

The reaction of aldimines with α‐(hydroxyimino) ketones of type 10 (1,2‐diketone monooximes) was used to prepare 2‐unsubstituted imidazole 3‐oxides 11 bearing an alkanol chain at N(1) (Scheme 2, Table 1). These products were transformed into the corresponding 2H‐imidazol‐2‐ones 13 and 2H‐imidazole‐2‐thiones 14 by treatment with Ac₂O and 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione, respectively (Scheme 3). The three‐component reaction of 10 , formaldehyde, and an alkane‐1,ω‐diamine 15 gave the bis[1H‐imidazole 3‐oxides] 16 (Scheme 4, Table 2). With Ac₂O, 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione or Raney‐Ni, the latter reacted to give the corresponding bis[2H‐imidazol‐2‐ones] 19 and 20 , bis[2H‐imidazol‐2‐thione] 21 , and bis[imidazole] 22 , respectively (Schemes 5 and 6). The structures of 11a and 16b were established by X‐ray crystallography.