Two Energetic Salts based on 5,5′‐Bitetrazole‐1,1′‐diolate: Syntheses,Characterization, and Properties

Two salts based on 1H,1′H‐5,5′‐bitetrazole‐1,1′‐diolate (BTO) anion with pyrazole ( 1 ) and imidazole ( 2 ) cations were synthesized with metathesis reactions. Structural characterization was accomplished for them by using the element analysis, Fourier transform infrared spectroscopy (FT‐IR), NMR and mass spectrum, and X‐ray single crystal diffraction. Thermal analysis for the title salts were determined by means of differential scanning calorimetry (DSC) and thermogravimetry‐derivative thermogravimetry (TG‐DTG) as well as the calculation of non‐isothermal kinetic parameters. Consequently, both salts shown acceptable thermal stabilities as the decomposition temperatures were over 200 °C. The enthalpies of formation were calculated for these salts using the measured combustion energies with a result of 70.6 kJ · mol^–1 for 1 and –47.8 kJ · mol^–1 for 2 , respectively. Impact and friction sensitivities were also tested and the results indicated that these salts both have low sensitivities (>40 J, 120 N). The title energetic salts possess acceptable performance, they can therefore be applied in the field of energetic materials.     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

5,5′‐Hydrazinebistetrazole: An Oxidation‐stable Nitrogen‐rich Compound and Starting Material for the Synthesis of 5,5′‐Azobistetrazolates

All 5,5′‐hydrazinebistetrazoles reported in the literature are sensitive to oxidation and react with atmospheric oxygen to yield the corresponding 5,5′‐azobistetrazolates on time. Herewith, we report on the synthesis of the free acid 5,5′‐hydrazinebistetrazole (HBT) which showed to be stable on air for extended periods of time. The compound was fully characterized by analytical and spectroscopic methods and its X‐ray structure was determined by diffraction techniques. Besides, we determined its explosive properties by BAM methods and calculated its heat of formation (+414 kJ mol^?1), detonation velocity (8523 m s^?1) and detonation pressure (27.7 GPa). HBT proved to be very safe to handle (impact sensitivity: >30 J, friction sensitivity: ～108 N) and was used as a starting material for the synthesis of some already reported 5,5′‐azobistetrazolates: NH₄⁺, NH₂NH₃⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺.     

A three‐dimensional CdII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands

The title coordination polymer, poly[[aqua(μ₅‐1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dicadmium(II)] dihydrate], {[Cd₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)₂(H₂O)]·2H₂O}_n, was crystallized from a mixture of 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylic acid (H₄bpta), 1,4‐bis(1H‐imidazol‐1‐yl)benzene (1,4‐bib) and cadmium nitrate in water–dimethylformamide. The crystal structure consists of two crystallographically independent Cd^II cations, with one of the Cd^II cations possessing a slightly distorted pentagonal bipyramidal geometry. The second Cd^II centre is coordinated by carboxylate O atoms and imidazole N atoms from two separate 1,4‐bib ligands, displaying a distorted octahedral CdN₂O₄ geometry. The completely deprotonated bpta⁴⁻ ligand, exhibiting a new coordination mode, bridges five Cd^II cations to form one‐dimensional chains viaμ₃‐η¹:η²:η¹:η² and μ₂‐η¹:η¹:η⁰:η⁰ modes, and these are further linked by 1,4‐bib ligands to form a three‐dimensional framework with a (4².6⁴)(4.6²)(4³.6⁵.7²) topology. The structure of the coordination polymer is reinforced by intermolecular hydrogen bonding between carboxylate O atoms, aqua ligands and crystallization water molecules. The solid‐state photoluminescence properties were investigated and the complex might be a candidate for a thermally stable and solvent‐resistant blue fluorescent material.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

1,1′‐Diethyl‐4,4′‐bipyridine‐1,1′‐diium bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide): multiple C—H...N hydrogen bonds form a complex sheet structure

In the title salt, C₁₄H₁₈N₂²⁺·2C₉H₅N₄O⁻, the 1,1′‐diethyl‐4,4′‐bipyridine‐1,1′‐diium dication lies across a centre of inversion in the space group P2₁/c. In the 1,1,3,3‐tetracyano‐2‐ethoxypropenide anion, the two independent –C(CN)₂ units are rotated, in conrotatory fashion, out of the plane of the central propenide unit, making dihedral angles with the central unit of 16.0 (2) and 23.0 (2)°. The ionic components are linked by C—H...N hydrogen bonds to form a complex sheet structure, within which each cation acts as a sixfold donor of hydrogen bonds and each anion acts as a threefold acceptor of hydrogen bonds.     

New organo‐soluble aromatic polyimides based on 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride and aromatic diamines

New aromatic tetracarboxylic dianhydride, having isopropylidene and bromo‐substituted arylene ether structure 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride, was synthesized by the reaction of 4‐nitrophthalonitrile with 3,3′,5,5′‐tetrabromobisphenol A, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). The novel aromatic polyetherimides having inherent viscosities up to 1.04 dL g⁻¹ were obtained by either a one‐step or a conventional two‐step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), pyridine, and even in less polar solvents like chloroform and tetrahydrofuran (THF). These aromatic polyimides had glass transition temperatures in the range of 256–303°C, depending on the nature of the diamine moiety. Thermogravimetric analysis (TGA) showed that all polymers were stable, with 10% weight loss recorded above 470°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1673–1680, 1999     

Two ZnII‐based MOFs constructed with biphenyl‐2,2′,5,5′‐tetracarboxylic acid and flexible N‐donor ligands: syntheses,structures and properties

Two new Zn²⁺‐based metal–organic frameworks (MOFs) based on biphenyl‐2,2′,5,5′‐tetracarboxylic acid, i.e. H₄(o,m‐bpta), and N‐donor ligands, namely, poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] dimethylformamide monosolvate dihydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·C₃H₇NO·2H₂O}_n or {[Zn₂(o,m‐bpta)(1,3‐bimb)₂]·C₃H₇NO·2H₂O}_n ( 1 ) {1,3‐bimb = [1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}, and poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] monohydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·H₂O}_n or {[Zn₂(o,m‐bpta)(1,4‐bimb)₂]·H₂O}_n ( 2 ) {1,4‐bimb = [1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}, have been synthesized under solvothermal conditions. The complexes were characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction analysis. Structurally, the (o,m‐bpta)^4? ligands are fully deprotonated and combine with Zn²⁺ ions in μ₄‐coordination modes. Complex 1 is a (3,4)‐connected porous network with honeycomb‐like [Zn₂(o,m‐bpta)]_n sheets formed by 4‐connected (o,m‐bpta)^4? ligands. Complex 2 exhibits a (2,4)‐connected network formed by 4‐connected (o,m‐bpta)^4? ligands linking Zn²⁺ ions in left‐handed helical chains. The cis‐configured 1,3‐bimb and 1,4‐bimb ligands bridge Zn²⁺ ions to form multi‐membered [Zn₂(bimb)₂] loops. Optically, the complexes show strong fluorescence and display larger red shifts compared to free H₄(o,m‐bpta). Complex 2 shows ferroelectric properties due to crystallizing in the C_2v polar point group.     

Synthesis,crystal structure and magnetic properties of (acetato‐κ2O,O′)bis(5,5′‐dimethyl‐2,2′‐bipyridine‐κ2N,N′)nickel(II) perchlorate monohydrate

The title hydrated ionic complex, [Ni(CH₃COO)(C₁₂H₁₂N₂)₂]ClO₄·H₂O or [Ni(ac)(5,5′‐dmbpy)₂]ClO₄·H₂O (where 5,5′‐dmbpy is 5,5′‐dimethyl‐2,2′‐bipyridine and ac is acetate), (1), was isolated as violet crystals from the aqueous ethanolic nickel acetate–5,5′‐dmbpy–KClO₄ system. Within the complex cation, the Ni^II atom is hexacoordinated by two chelating 5,5′‐dmbpy ligands and one chelating ac ligand. The mean Ni—N and Ni—O bond lengths are 2.0628 (17) and 2.1341 (15) Å, respectively. The water solvent molecule is disordered over two partially occupied positions and links two complex cations and two perchlorate anions into hydrogen‐bonded centrosymmetric dimers, which are further connected by π–π interactions. The magnetic properties of (1) at low temperatures are governed by the action of single‐ion anisotropy, D, which arises from the reduced local symmetry of the cis‐NiO₂N₄ chromophore. The fitting of the variable‐temperature magnetic data (2–300 K) gives g_iso = 2.134 and D/hc = 3.13 cm⁻¹.     

Synthesis,Characterization, and Energetic Properties of Alkaline and Alkaline Earth Salts of 5,5′‐bistetrazole‐1,1′‐diolate

5,5′‐Bistetrazole‐1,1′‐diolate‐based energetic salts from alkaline (Li⁺, K⁺, and Na⁺) and alkaline earth metal salts (Mg²⁺, Ca²⁺, and Ba²⁺) were synthesized in a simple, straightforward manner and were characterized by IR and NMR spectroscopy, and elemental analysis. Single‐crystal X‐ray diffraction of 4 salts (Li⁺, Na⁺, K⁺, and Mg²⁺) is given. The X‐ray structures show that in the title compounds, the metal atoms are bonded to the nitrogen and oxygen in the bistetrazole ring to form the sandwich structure. In addition, thermal stabilities of all title compounds were determined with differential thermal analysis‐thermal gravity analysis. All these new materials exhibit excellent thermal stabilities, high density, and excellent insensitivity to impact (h ₅₀ > 60 cm). Especially, the potassium salt is of interest as potential “green heat‐resistance explosive” with high density and high thermal stability as well as low sensitivity.     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

Two CoII coordination polymers of biphenyl‐2,2′,5,5′‐tetracarboxylic acid with flexible N‐donor ligands: syntheses,structures and magnetic properties

Two Co^II‐based coordination polymers, namely poly[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato){μ₂‐1,3‐bis[(1H‐imidazol‐1‐yl)methyl]benzene}dicobalt(II)], [Co₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]_n or [Co₂(o,m‐bpta)(1,3‐bimb)₂]_n ( I ), and poly[[aqua(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato){1,4‐bis[(1H‐imidazol‐1‐yl)methyl]benzene}dicobalt(II)] dihydrate], {[Co₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂(H₂O)₂]·4H₂O}_n or {[Co₂(o,m‐bpta)(1,4‐bimb)₂(H₂O)₂]·4H₂O}_n ( II ), were synthesized from a mixture of biphenyl‐2,2′,5,5′‐tetracarboxylic acid, i.e. [H₄(o,m‐bpta)], CoCl₂·6H₂O and N‐donor ligands under solvothermal conditions. The complexes were characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction analysis. The bridging (o,m‐bpta)^4? ligands combine with Co^II ions in different μ₄‐coordination modes, leading to the formation of one‐dimensional chains. The central Co^II atoms display tetrahedral [CoN₂O₂] and octahedral [CoN₂O₄] geometries in I and II , respectively. The bis[(1H‐imidazol‐1‐yl)methyl]benzene (bimb) ligands adopt trans or cis conformations to connect Co^II ions, thus forming two three‐dimensional (3D) networks. Complex I shows a (2,4)‐connected 3D network with left‐ and right‐handed helical chains constructed by (o,m‐bpta)^4? ligands. Complex II is a (4,4)‐connected 3D novel network with ribbon‐like chains formed by (o,m‐bpta)^4? linkers. Magnetic studies indicate an orbital contribution to the magnetic moment of I and II due to the longer Co…Co distances. An attempt has been made to fit the χ_MT results to the magnetic formulae for mononuclear Co^II complexes, the fitting indicating the presence of weak antiferromagnetic interactions between the Co^II ions.     

Cobalt(II) chloride complexes with 1,1′‐dimethyl‐4,4′‐bipyrazole featuring first‐ and second‐sphere coordination of the ligand

In catena‐poly[[dichloridocobalt(II)]‐μ‐(1,1′‐dimethyl‐4,4′‐bipyrazole‐κ²N²:N^2′)], [CoCl₂(C₈H₁₀N₄)]_n, (1), two independent bipyrazole ligands (Me₂bpz) are situated across centres of inversion and in tetraaquabis(1,1′‐dimethyl‐4,4′‐bipyrazole‐κN²)cobalt(II) dichloride–1,1′‐dimethyl‐4,4′‐bipyrazole–water (1/2/2), [Co(C₈H₁₀N₄)₂(H₂O)₄]Cl₂·2C₈H₁₀N₄·2H₂O, (2), the Co²⁺ cation lies on an inversion centre and two noncoordinated Me₂bpz molecules are also situated across centres of inversion. The compounds are the first complexes involving N,N′‐disubstituted 4,4′‐bipyrazole tectons. They reveal a relatively poor coordination ability of the ligand, resulting in a Co–pyrazole coordination ratio of only 1:2. Compound (1) adopts a zigzag chain structure with bitopic Me₂bpz links between tetrahedral Co^II ions. Interchain interactions occur by means of very weak C—H...Cl hydrogen bonding. Complex (2) comprises discrete octahedral trans‐[Co(Me₂bpz)₂(H₂O)₄]²⁺ cations formed by monodentate Me₂bpz ligands. Two equivalents of additional noncoordinated Me₂bpz tectons are important as `second‐sphere ligands' connecting the cations by means of relatively strong O—H...N hydrogen bonding with generation of doubly interpenetrated pcu (α‐Po) frameworks. Noncoordinated chloride anions and solvent water molecules afford hydrogen‐bonded [(Cl⁻)₂(H₂O)₂] rhombs, which establish topological links between the above frameworks, producing a rare eight‐coordinated uninodal net of {4²⁴.5.6³} ( ilc ) topology.     

Structural and theoretical characterization of a new twisted 4′‐substituted terpyridine compound: 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine

4′‐Substituted derivatives of 2,2′:6′,2′′‐terpyridine with N‐containing heteroaromatic substituents, such as pyridyl groups, might be able to coordinate metal centres through the extra N‐donor atom, in addition to the chelating terpyridine N atoms. The incorporation of these peripheral N‐donor sites would also allow for the diversification of the types of noncovalent interactions present, such as hydrogen bonding and π–π stacking. The title compound, C₂₄H₁₆N₄, consists of a 2,2′:6′,2′′‐terpyridine nucleus (tpy), with a pendant isoquinoline group (isq) bound at the central pyridine (py) ring. The tpy nucleus deviates slightly from planarity, with interplanar angles between the lateral and central py rings in the range 2.24 (7)–7.90 (7)°, while the isq group is rotated significantly [by 46.57 (6)°] out of this planar scheme, associated with a short H_tpy…H_isq contact of 2.32 Å. There are no strong noncovalent interactions in the structure, the main ones being of the π–π and C—H…π types, giving rise to columnar arrays along [001], further linked by C—H…N hydrogen bonds into a three‐dimensional supramolecular structure. An Atoms In Molecules (AIM) analysis of the noncovalent interactions provided illuminating results, and while confirming the bonding character for all those interactions unquestionable from a geometrical point of view, it also provided answers for some cases where geometric parameters are not informative, in particular, the short H_tpy…H_isq contact of 2.32 Å to which AIM ascribed an attractive character.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

A three‐dimensional ZnII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands exhibiting photoluminescence

Ligands based on polycarboxylic acids are excellent building blocks for the construction of coordination polymers; they may bind to a variety of metal ions and form clusters, as well as extended chain or network structures. Among these building blocks, biphenyltetracarboxylic acids (H₄bpta) with C ₂ symmetry have recently attracted attention because of their variable bridging and multidentate chelating modes. The new luminescent three‐dimensional coordination polymer poly[(μ₅‐1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dizinc(II)], [Zn₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)]_n , was synthesized solvothermally and characterized by single‐crystal X‐ray diffraction, elemental analysis and IR spectroscopy. The crystal structure contains two crystallographically independent Zn^II cations. Both metal cations are located on twofold axes and display distorted tetrahedral coordination geometries. Neighbouring Zn^II centres are bridged by carboxylate groups in the syn –anti mode to form one‐dimensional chains. Adjacent chains are linked through 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands to form a three‐dimensional network. In the solid state, the compound exhibits blue photoluminescence and represents a promising candidate for a thermally stable and solvent‐resistant blue fluorescent material.