血红蛋白过氧化物模拟酶胶束催化显色体系

在胶束Tween80介质中，研究了以血红蛋白（hemoglobin,Hb)作为过氧化物模拟酶、隐性亮绿（recessive brilliant green,RGB)为氢供体底物、溶解氧为受氢体的酶催化反应特性。在pH5.64(NH4)2HPO4-KH2PO4缓冲溶液中，利用模拟酶对溶解氧作为受氢体催化RBG氧化生成亮绿（brilliant green,BG)而拟定了测定Hb含量的新方法。讨论了胶束介质对酶体系催化反应的影响及酶催化反应的可能机理。     

Electrospray ionization tandem mass spectrometric study of salt cluster ions: part 2--salts of polyatomic acid groups and of multivalent metals

Salt cluster ions formed from 0.05 M solutions of CaCl(2), CuCl(2) and Na(A)B (where A = 1 or 2 and B = CO(3)(2-), HCO(3)(-), H(2)PO(4)(-) and HPO(4)(2-)) were studied by electrospray ionization tandem mass spectrometry. The effects on salt cluster ions of droplet pH and of redox reactions induced by electrospray provide information on the electrospray process. CaCl(2) solution yielded salt cluster ions of the form (CaCl(2))(n)(CaCl)(x)(x+) and (CaCl(2))(n)(Cl)(y)(y-), where x, y = 1-3, in positive- and negative-ion modes, respectively. Upon collision induced dissociation (CID), singly charged CaCl(2) cluster ions fragmented, doubly charged cluster ions generated either singly or both singly and doubly charged fragment ions, depending on the cluster mass, and triply charged clusters fragmented predominantly by the loss of charged species. CuCl(2) solution yielded nine series of cluster ions of the form (CuCl(2))(n)(CuCl)(m) plus Cu(+), CuCl(+), or Cl(-). CuCl, the reductive product of CuCl(2), was observed as a neutral component of positively and negatively charged cluster ions. Free electrons were formed in a visible discharge that bridged the gap between the electrospray capillary and the sampling cone brought about the reduction of Cu(2+) to Cu(+). Upon CID, these cluster ions fragmented to lose CuCl(2), CuCl, Cl, and Cl(2). Na(2)CO(3) and NaHCO(3) solutions yielded cluster ions of the form (Na(2)CO(3))(n) plus Na(+) or NaCO(3)(-). Small numbers of NaHCO(3) molecules were found in some cluster ions obtained with the NaHCO(3) solution. For both Na(2)HPO(4) and NaH(2)PO(4) solutions, ions of the form (Na(2)HPO(4))(h), (NaH(2)PO(4))(i), (Na(3)PO(4))(j), (NaPO(3))(k) plus Na(+), PO(3)(-) or H(2)PO(4)(-) were observed. In addition, ions having one or two phosphoric acid (H(3)PO(4)) molecules were observed from the NaH(2)PO(4) solution while ions containing one sodium hydroxide (NaOH) molecule were observed from the Na(2)HPO(4) solution. The cluster ions observed from these four salts of polyatomic acid groups indicate that changes in pH occur in both directions during the electrospray process principally by solvent evaporation; the pH value of the acidic solution became lower and that of the basic solution higher.     

Adsorption of human serum albumin (HSA) onto colloidal TiO2 particles, Part I

The adsorption of human serum albumin (HSA) onto colloidal TiO2 (P25 Degussa) particles was studied in NaCl electrolyte at different solution pH and ionic strength. The HSA-TiO2 interactions were studied using adsorption isotherms and the electrokinetic properties of HSA-covered TiO2 particles were monitored by electrophoretic mobility measurements. The adsorption behavior shows a remarkable dependence of the maximum coverage degree on pH and was almost independent of the ionic strength. Other characteristic features such as maximum adsorption values at the protein isoelectric point (IEP approximately 4.7) and low-affinity isotherms that showed surface saturation even under unfavorable electrostatic conditions (at pH values far away from the HSA IEP and TiO2 PZC) were observed. Structural and electrostatic effects can explain the diminution of HSA adsorption under these conditions, assuming that protein molecules behave as soft particles. Adsorption reactions are discussed, taking into account acid-base functional groups of the protein and the surface oxide in different pH ranges, considering various types of interactions.     

羟基磷灰石对牛血清白蛋白的吸附特性研究

研究了羟基磷灰石表面电位随溶液PO₄^3-浓度、Ca²⁺浓度、离子强度和pH的变化规律;测定了不同操作条件下牛血清白蛋白在羟基磷灰石上的吸附容量;吸附等温线的测定结果表明该吸附属于Langmuir型;通过对该吸附过程的动力学研究,计算得到的表观活化能和吸附热数值较低,表明该吸附是物理吸附.     

1-乙基-3-甲基咪唑磷酸二甲酯盐+K3PO4/K2HPO4/K2CO3+H2O离子液体双水相体系在T=298.15 K时相图数据的测量和相关性

实验测定了1-乙基-3-甲基咪唑磷酸二甲酯盐(1-ethyl-3-methylimidazolium dimehtyl phosphate,[Emim]DMP)+盐(K3PO4,K2HPO4和K2CO3)+H2O体系在298.15 K的双节点数据.用3个经验方程与双节点数据关联,发现Merchuk方程简便并且准确性好.不同盐的分相能力顺序为K3PO4>K2HPO4>K2CO3,这与水合离子Gibbs自由能(ΔhydG)有关.用Othmer-Tobias方程、Bancroft方程和二元参数方程计算此方法和相应系线数据的可靠性.[Emim]DMP是常见的离子液体,广泛用于萃取石油燃料中的硫.报道了[Emim]DMP+盐+H2O体系的相图数据.     

Formation of thin calcium carbonate films with aragonite and vaterite forms coexisting with polyacrylic acids and chitosan membranes

CaCO3 crystallization on a chitosan membrane was studied using diffusion of (NH4)2CO3 vapors into a CaCl2 solution containing differing added amounts of two polyacrylic acids (PAAs) with molecular weights of ca. 2.0 x 10(3) and ca. 4.5 x 10(4). The coexistence of PAA and the chitosan membranes produced thin CaCO3 island crystals, which developed into a continuous CaCO3 film on the membranes. Continuous CaCO3 films consisting of only aragonite formed on the chitosan membranes at the optimum amount of PAA. When the amount of PAA is not optimum, the polymorph of CaCO3 switches from aragonite to vaterite, and the morphology has a tendency to become an isolated island structure. The formation of the aragonite and vaterite island crystals and the appearance of a range of added PAA suitable for their formation are explained by the action of two parallel phenomena: (a) the high concentration of Ca2+ ions in the chitosan membrane vicinity is achieved by the interaction between the -COO- groups of PAA adsorbed by the -NH3+ groups of the chitosan membrane through an electrostatic force and free Ca2+ ions in the CaCl2 solution, which produces the high supersaturation with CaCO3 in the membrane vicinity during CO2 diffusion; (b) PAA, remaining as mobile carboxylic anions in the CaCO3 solution, inhibits the growth of the CaCO3 island crystals by its adsorption. The CaCO3 supersaturation in the membrane vicinity is controlled by regulating the balance of these phenomena, which leads to the formation of the desired CaCO3 polymorph.     

Sorption and permeation behaviour of metal thiocyanate complexes on cellulose acetate polymers

Various metal thiocyanate complexes in aqueous solution were sorbed on solid cellulose acetate polymers. The sorption selectivity increased in the order Zn(2+) > Fe(3+) > Cu(2+) > Co(2+) > Ni(2+). The sorption behaviour followed a Langmuir-type adsorption isotherm, and the maximum adsorption capacity was 6.1 x 10(-5) mole of complex per g of polymer under optimum conditions. The zinc species sorbed appear to be NH(4)Zn(H(2)O)(SCN)(3) or (NH(4))(2)Zn(SCN)(4) according to analysis of the sorption equilibrium. The ion-association species formed by the complex zinc anion and the ammonium ion was supposed to be sorbed (or "extracted") onto the polymer matrix. As an application of sorption of metal complexes, a new hyperfiltration process was proposed for selective separation of metal ions. Thus, a mixture of metal thiocyanate complexes was hyperfiltered through cellulose acetate membranes. Permeation of certain metal complexes was preferred, and the selectivity was found to be similar to the sorption selectivity. These findings lead to a generalized idea that hyperfiltration separation of ionic species, particularly anionic metal complexes, can be attained by using polymer membranes which selectively adsorb or extract such ionic species as ion-association complexes onto the polymer matrix.     

多晶Fe60Ni40合金阳极钝化膜的XPS研究

过渡金属Fe、Ni或其合金由于它们具有磁性和在工业上被用作催化剂等，它们与氧化腐蚀性气体02、C12等的作用已被广泛研究［‘－3］．含Ni的不锈钢和含Ni50％的FeNi基合金在酸性溶液中表现出比铁更好的耐腐蚀性并增强了氧化钝化层的附着力，放它们在溶液的腐蚀与钝性研究已引起广泛的兴趣，甚至包括对F6Ni基非晶合全玻璃的腐蚀与钝性研究【4一刊，用不同的方法研究溶液状态下的自然氧化膜或阳极钝化膜，得出的结果不同，对腐蚀与钝性解释也很不一致，硼酸一础砂或磷酸一磷酸盐缓冲液在工业上被广泛用作清洗剂、缓蚀剂或成膜剂等·因此，…     

Hydrothermal synthesis, thermal, and magnetic data on new alkaline vanadium phosphate My(VO)9 + x(PO4)4x(HPO4)12 - 4x with M = Cs+ (y = 5.29, x = 1) and M = NH4+, Rb+ (y approximately 5, x approximately 1)

Brownish platelet crystals of My(VO)9 + x(PO4)4x(HPO4)12 - 4x (M = Cs+, NH4+ and Rb+) were prepared hydrothermally. The structure of Cs approximately 5(VO)10(PO4)4(HPO4)8 was solved from single-crystal X-ray diffraction data in the centrosymmetric monoclinic space group C2/c (No. 15) a = 21.1951(8) A, b = 12.2051(4) A, c = 20.6230(8) A, beta = 109.742(2) degrees, Z = 4 (R1(Fo) = 0.054, wR2(Fo2) = 0.123). The structure of Cs approximately 5(VO)10(PO4)4(HPO4)8 is described and compared to that of K2(VO)3(HPO4)4 previously reported by Lii. For the three compounds, thermogravimetric data and susceptibility measurements were investigated and were found to be in agreement with the structural study.     

Naphthalene sulfonate functionalized dendrimers at the solid-liquid interface: influence of core type, ionic strength, and competitive ionic adsorbates

The adsorption of naphthalene disulfonic acid surface-functionalized dendrimers (generation 4) on to colloidal alumina particles is reported, considering the role of dendrimer core type (ammonia vs benzylhydrylamine-polylysine) and electrolyte addition on the adsorption affinity and interfacial packing and competitive adsorption. Irrespective of the dendrimer core type, the maximum adsorbed amount increased with increasing ionic strength. The adsorption affinity of a benzylhydrylamine-cored SPL-7013 increased with increasing ionic strength, whereas a decrease was observed for the ammonia-cored SPL-2923. At high ionic strengths (>or=10(-1) M NaCl) dendrimers close pack at the interface as an array of equivalent hard spheres, whereas at lower ionic strengths both dendrimers occupy a lower area than theoretically predicted for either cubic or hexagonal close packing, based on double layer repulsion. The additional attraction between dendrimers is attributed to the intercalation of the neighboring dendrons. Adsorption of SPL-2923 is enhanced by the presence of Ca2+ ions and depressed by the presence of HCO3- and HPO4(2-) ions, whereas SPL-7013 adsorption is only depressed by the presence of HPO4(2-) ions, suggesting a dendrimer-specific competitive adsorption process. This work clearly demonstrates the role of dendrimer architecture on adsorption at an interface, a process of fundamental importance to a wide range of dendrimer applications.     

(CH3)2NH(CH2)2NH(CH3)2][(UO2)2F2(HPO4)2]: a new organically templated layered uranium phosphate fluoride--synthesis, structure, characterization, and ion-exchange reactions

A new organically templated layered uranium phosphate fluoride, [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has been synthesized by hydrothermal reaction of UO(3), H(3)PO(4), HF, and (CH(3))(2)NCH(2)CH(2)N(CH(3))(2) at 140 degrees C. [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has a layered crystal structure consisting of seven-coordinated UO(5)F(2) pentagonal bipyramids and four-coordinated HPO(4) tetrahedra. Each anionic layer containing three-, four-, and six-membered rings is separated by [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations. The [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations may be readily exchanged with the M(2+) ions (M = Ba, Sr and Ca) in water to give high crystalline AE(UO(2))(2)(PO(4))(2).6H(2)O (AE = Ca, Sr, Ba).     

Speciation of arsenic by ion chromatography inductively coupled plasma mass spectrometry using ammonium eluents

A method based on ion chromatography (IC) and inductively coupled plasma MS (ICP-MS) was developed for the speciation of arsenic in water and soil extracts. An anion-exchange column (G3154A/101) was used to separate As(III), As(V), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) with excellent resolution. Various ammonium salts, including NH4H2PO4, (NH4)2HPO4, (NH4)2CO3, and NH4HCO3, were examined as eluents to reduce matrix interference from chloride and to solve clogging problems. The best arsenic speciation was obtained within 9 min with excellent resolution and without interference from high chloride concentrations using an eluent containing 7.5 mM (NH4)2HPO4 at pH 7.9. The detection limits for the target arsenic species ranged from 0.1 to 0.4 microg/L with direct injection of sample without matrix elimination. The proposed method was effectively demonstrated by determining arsenic species in contaminated waters and soils of Bangladesh.     

Effect of background electrolytes and pH on the adsorption of Cu(II)/EDTA onto TiO2

Cu(II)/EDTA adsorption onto TiO2 has been studied with a variation of pH, ionic strength, and type of background electrolytes. Cu(II) adsorption onto TiO2 increased as ionic strength increased when NaClO4 was used as a background electrolyte. This can be explained by the increase of exp(-FPsi/RT) as a part of the electrostatic correction within a surface complexation model. Model predictions described experimental adsorption trends. Types of background anions (ClO4, Cl, NO2, NO3, SO3, and PO4) did not affect adsorption trends and adsorption amounts of Cu(II) onto TiO2. However, different trends were observed with various types of background ions used as ionic strength in EDTA and Cu(II)-EDTA adsorption. EDTA adsorption was decreased by using Na2SO3 and Na3PO4 as background ions, while NaClO4, NaCl, NaNO2, and NaNO3 showed negligible interference on the EDTA adsorption, which matched well with model predictions. The presence Na2SO3 and Na3PO4 also interfered with Cu(II)-EDTA adsorption, to a somewhat greater extent compared to EDTA adsorption, especially at lower pH. This interference was also noted in Cu(II)-EDTA adsorption with a variation of Cu(II)-EDTA concentration at constant ionic strength (3 x 10(-3) M) by using Na2SO3 and Na3PO4, especially at lower ratios of Cu(II)-EDTA to Na2SO3 and Na3PO4. These results suggest that the ratio of Cu(II)-EDTA to Na2SO3 and Na3PO4 is an important factor for the controlling of competition between these background ions and Cu(II)-EDTA onto TiO2. Model prediction generally matched well with experimental adsorption using NaClO4, NaCl, NaNO2, and NaNO3 as backgrounds ions, while a severe deviation was observed in the presence of Na2SO3 and Na3PO4. These results suggest that the mobility of copper ions as Cu(II)-EDTA can be increased from polluted area in the presence of multivalent background ions, especially as the ratio of adsorbates/background ions decreased.     

Kinetic parameters of urease immobilized on modified acrylonitrile copolymer membranes in the presence and absence of Cu(II) ions

Poly(acrylonitrile-methylmethacrylate-sodium vinylsulfonate) membranes were subjected to seven different chemical modifications and the amount of the newly formed groups was measured for each membrane. Urease was then covalently immobilized onto the modified membranes and the amount of bound protein was determined. The kinetic parameters V(max) and K(m) of the immobilized urease were studied under static and dynamic conditions. Results showed that the rate of the enzyme reaction was higher for the membranes modified with NH(2)OH . H(2)SO(4), NH(2)NH(2) . H(2)SO(4), NaOH + EDA and NaOH + GA + EDA. It was confirmed that the reaction rate, measured under dynamic conditions, was higher than that one determined under static conditions. The influence of Cu(II) ions, as inhibitors, on the enzyme reaction kinetics (V(i) and K(i)) was also investigated. It turned out that the most sensitive membranes towards Cu(II) were those modified with NH(2)NH(2) . H(2)SO(4), NaOH + EDA and H(2)O(2). The results initiated further investigations on the influence of other heavy metal ions (Cd(II), Zn(II), Ni(II) and Pb(II)) over urease bound to a NH(2)OH . H(2)SO(4)-modified membrane. It was found that the inhibition effect of the heavy metal ions over immobilized urease decreases in the order: Cu(II) > Cd(II) > Zn(II) > Ni(II) > Pb(II). [Diagram: see text]     

Electrokinetic properties of wavellite and its floatability with cationic and anionic collectors

The reverse apatite flotation with fatty acids has been widely used for the reduction of phosphorus content of magmatic origin iron ores. However, the occurrence of phosphorus intensely disseminated as secondary minerals such as wavellite renders the anionic reverse flotation a challenge. Zeta potential measurements and microflotation tests of wavellite with the use of anionic and cationic collectors were carried out in this work. The wavellite's IEP value was achieved at pH 4.5. Below the IEP value, the surface positively charged sites are made up of aluminum ions. The species H(+), Al(OH)(2)(+), Al(OH)(2+), Al(3+), OH(-), H(2)PO(4)(-), HPO(4)(2-), and PO(4)(3-) play a role in the protonation and deprotonation reactions that will determine the wavellite-solution interface properties. The highest values of wavellite's floatability under basic pH conditions were achieved in the presence of cationic collectors (1 × 10(-4) mol L(-1)). The formation of surface complexes and the precipitation of insoluble salt of aluminum onto wavellite surface seems to be the most likely hypothesis for the chemical nature interactions between amines and wavellite. The surface formation of aluminum oleate on the wavellite's surface seems to be the most probable hypothesis for the adsorption mechanism and the resultant high floatability of wavellite between pH 7.5 and pH 10.0 in the presence of sodium oleate (1 × 10(-4) mol L(-1)). The results showed that the cationic reverse flotation of secondary phosphates is a promising route to reduce the phosphorus content of iron ores from deposits that underwent a supergene enrichment process, since wavellite floatability in the alkaline pH range, using amine as collector, was not significantly affected by the presence of corn starch.     

Simultaneous uptake of Ni2+, NH4+ and PO4(3-) by amorphous CaO-Al2O3-SiO2 compounds

Simultaneous uptake of Ni2+, NH4+, and PO4(3-) by amorphous CaO-Al2O3-SiO2 (C-A-S) compounds was investigated using batch and column methods. Fifteen different C-A-S samples with systematically varied chemical compositions were prepared by coprecipitation from ethanol-water solutions containing Ca(NO3)2.4H2O, Al(NO3)3.9H2O, and Si(OC2H5)4, using NH4OH as the precipitating agent. The resulting precipitates were dried and heated at various temperatures to produce the C-A-S samples, which were then characterized by XRD, FTIR, solid state MAS NMR, DTA-TG, and N2 adsorption. All the C-A-S samples prepared at 600-900 degrees C were amorphous, apart from the CaO-rich samples. Simultaneous uptake of Ni2+, NH4+, and PO4(3-) was determined by a batch method using a solution with an initial concentration of 2 mM. In these experiments, the uptake abilities of the C-A-S samples for Ni2+ and PO4(3-) were high, but were relatively low for NH4+. The uptake abilities for Ni2+ and PO4(3-) increased but that for NH4+ decreased as the silica content in the C-A-S decreased, suggesting that similar uptake mechanisms (ion substitution and/or precipitation) are operating for Ni2+ and PO4(3-), but the uptake mechanism for NH4+ is different (physical adsorption). The column experiments indicate that the order of uptake ability of C-A-S for the three ions is NH4+ < PO4(3-) < Ni2+. Although the silica content of the C-A-S does not have the expected influence on the uptake of these three ions, for NH4+ it plays an important role in the formation of the amorphous phase and also in the suppression of Ca2+ and/or Al3+ release from the C-A-S during the uptake experiments. The optimum uptake properties of the C-A-S can thus be controlled by adjusting the chemical compositions and heating conditions under which the samples are prepared.     

手性膦酸锆的原位合成与表征

不对称催化和对映体拆分是有机化学中最活跃的高技术领域,其中手性固体材料的设计与合成是极具挑战性的前沿课题之一.据Corey等研究的手性技术机理,手性固体一般应该具有空间允许、手性源为官能化的有机化合物和金属离子作为反应的活性中心等三大特征．然而,迄今同时具有上述特征的手性固体材料却很少．     

一种用于鸡蛋中氯霉素残留测定的吡啶类离子液体双水相体系

建立了由亲水性离子液体N-乙基吡啶溴化盐([Epy]Br)和K2HPO4形成的双水相体系对鸡蛋中痕量氯霉素(CAP)检测的高效液相色谱方法.优化了离子液体[Epy]Br和K2HPO4成相的条件,研究了萃取CAP的最佳体系.采用混合溶液(pH=7磷酸盐溶液,NaCl溶液,甲醇)提取样品,离子液体双水相体系富集,V(甲醇):V(水)=30:70为流动相,流速1.0 mL/min,UV检测器,检测波长278 nm,柱温25 ℃,进样量20 μL.对鸡蛋中氯霉素残留进行了测定,在0.05～15 mg/L范围内,CAP的响应峰面积与其相应浓度呈良好相关性(r=0.9994).不同浓度的回收率为90.3%～101.7%,相对标准偏差为1.7%～2.6%.本该法检测鸡蛋中氯霉素残留具有干扰小、速度快、灵敏度高等优点.最低检出限为1 μg/kg.     

Synthesis and crystal structure of thorium bis(hydrogenphosphate) monohydrate

Microcrystals of Th(HPO 4) 2.H 2O were hydrothermally obtained from a Th(NO 3) 4-CO(NH 2) 2-H 3PO 3-H 2O system ( T = 180 masculineC). The structure [orthorhombic, Pbca, a = 9.1968(2) A, b = 18.6382(2) A, c = 8.7871(2) A], unlike alpha-Zr(HPO 4) 2.H 2O-type layered compounds, consists of a three-dimensional framework with PO 4 tetrahedra coordinated to Th atoms. The water molecule is also coordinated to the Th atom and projected toward small channels running along the directions of the a and c axes. The ThO 6O(w) environment could be described as a highly distorted pentagonal bipyramid.