含固氮酶钼微环境结构单元O_3MoS_3的Mo－S，Mo－Fe－S化合物的研究

研究了含固氮酶钼微环境Ｏ_３ＭｏＳ_３结构单元四个系列化合物［Ｍｏ（Ｓ，Ｏ－Ｃ_６Ｈ_４－１，２］~－（Ｍ）［Ｍｏ_２（ＣＯ）_３（Ｓ，Ｏ－Ｃ_６Ｈ_４－１，２）_３］~（２－）（Ｄ），［Ｍｏ_３（ＣＯ）_７（Ｓ，Ｏ－Ｃ_６Ｈ_４－１，２）_３］~（２－）（Ｔ），和［Ｍｏ_２Ｆｅ（ＣＯ）_４（Ｓ，Ｏ－Ｃ_６Ｈ_４－１，２）_３Ｃｌ_２］~（２－）（Ｔ_ｆ）的合成化学与结构化学，并通过Ｘ－射线光电子能谱，红外光谱和电化学环伏安研究，深入探讨了它们的混合价，电子迁移和电化学行为，也讨论了有趣的Ｏ_３ＭｏＳ_３结构单元。     

Do S,S'-coordinated o-dithiobenzosemiquinonate(1-) radicals exist in coordination compounds? the [AuIII(1,2-C6H4S2)2]1 -/0 couple

The square planar, light-green, diamagnetic complex [N(n-Bu)(4)][Au(III)(L(t)()(-)(Bu))(2)] (1) reacts with iodine in acetone affording the neutral paramagnetic species [Au(L(t)()(-)(Bu))(2)] (1a) (S = (1)/(2)) where H(2)[L(t)()(-)(Bu)] represents the ligand 3,5-di-tert-butyl-1,2-benzenedithiol. The corresponding complexes containing the unsubstituted ligand H(2)[L], 1,2-benzenedithiol, namely [N(n-Bu)(3)H][Au(L)(2)] (2) and [Au(L)(2)] (2a), have also been prepared and characterized by X-ray crystallography; the structure of the latter has been reported in ref 10. (197)Au M?ssbauer spectra of 1 and 1a clearly show that the one-electron oxidation is ligand-centered and does not involve the formation of Au(IV) (d(7)). The spectroscopic features of the ligand mixed-valent species 1a were determined by UV-vis, EPR, and IR spectroscopy which allows the detection of S,S-coordinated 1,2-dithiobenzosemiquinonate(1-) radicals in coordination compounds.     

Addition of nitriles to alkaline earth metal complexes of 1,2-bis[(phenyl)imino]acenaphthenes

Compounds [Sr(dpp-bian)(thf)4] (2), [Ba(dpp-bian)(dme)2.5] (3) and [Mg(dtb-bian)(thf)2] (4) (dpp-bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene; dtb-bian = 1,2-bis[(2,5-di-tert-butylphenyl)imino]acenaphthene) were prepared by reduction of dpp-bian and dtb-bian with an excess of metallic Mg, Sr, or Ba in THF or DME. Reactions of [Mg(dpp-bian)(thf)3], 3, and 4 with diphenylacetonitrile gave keteniminates [Mg(dpp-bianH)(NCCPh2)(thf)2] (5), [Mg(dtb-bianH)(NCCPh2)(thf)2] (6), and [Ba(dpp-bianH)(NCCPh2)(dme)2] (7), respectively. The reaction of 2 with CH3C[triple chemical bond]N in THF gave [{Sr(dpp-bianH)[N(H)C(CH3)C(H)CN](thf)}2] (8). The compounds 2, 3, 5-8 were characterized by elemental analysis, and IR and NMR spectroscopy. Molecular structures of 2, 3, 7, and 8 were determined by single-crystal X-ray diffraction. In contrast to reactions of alkali-metal reagents, magnesium amides, or yttriumalkyls with alpha-H acidic nitriles, which are accompanied by an amine or an alkane elimination, the reactions of [Mg(dpp-bian)(thf)3] (1), 2, 3, and 4 with such nitriles proceeded with formation of Mg, Sr, and Ba keteniminates and simultaneous protonation of one nitrogen atom of the bian ligand. The NMR spectroscopic data obtained for complex 5 indicated that in solution the amino hydrogen atom underwent the fast (on the NMR timescale) shuttle transfer between both nitrogen atoms of the dpp-bianH ligand.     

Copper Carboxylate-phosphonates: Syntheses,Crystal Structures and Magnetic Properties

Two novel copper carboxyly-phosphonates, namely, Cu_(2.5)(5-pnc)(SO_4)_(0.5)(OH)(H_2O)_(0.5)(1) and Cu_(0.5)(5-pncH_2)(H_2O)_(1.5)(2)(5-pncH_3 = 5-phosphono-1-naphthalenecarboxylic acid), have been synthesized and characterized by X-ray diffraction, infrared spectroscopy, elemental analysis, and thermogravimetric analysis. In compound 1, each {PO_3C} tetrahedron is corner-shared with two {Cu(1)O_4}, two {Cu(2)O_5} and one {Cu(3)O_5},thus forming a one-dimensional inorganic chain along the c axis containing 8-membered rings of [Cu_3O_4S] and 19-membered cages of [Cu_5O_(10)P_4]. The inorganic chains are further connected by a 5-pnc~(3-) ligand to generate a three-dimensional framework. Compound 2 exhibits a one-dimensional structure, in which the inorganic chains of [Cu-O-Cu]_n are connected by the organic ligands through hydrogen bonding interactions, forming an infinite two-dimensional layer. Magnetic measurements of 1 indicate that dominant antiferromagnetic interactions are mediated between the Cu~(2+) centers.     

Fabrication of nanoreactors based on polyoxoperoxometalates and enhancement of their catalytic activity

The nanoreactors were fabricated by reacting amphiphilic quaternary ammoniums and polyoxoperoxometalates K_n[PW_12-xTi_x- O_40-x（O₂）_x]（x=1,2 and 3;n = 5,7 and 9）(K₅[PW₁₁TiO₃₉（O₂）],K₇[PW₁₀Ti₂O₃₈（O₂）₂]and K₉[PW₉Ti₃O₃₇（O₂）₃]).Fourier transform infrared spectroscopy（FT-IR）,transmission electron microscopy（TEM） were used to characterize the resulting samples. This kind of nanocatalysts could promote NH₄SCN’ degradation into simple inorganic compounds such as SO₄^2-,HCO₃^- and NO₃^- only using oxygen as an oxidant under room conditions.     

Spectroscopic characterization of molybdenum dinitrogen complexes containing a combination of di- and triphosphine coligands: 31P NMR analysis of five-spin systems

The three molybdenum-N2 complexes [Mo(N2)(dpepp)(depe)] (1), [Mo(N2)(dpepp)(dppe)] (2), and [Mo(N2)(dpepp)(1,2-dppp)] (3), all of which contain a combination of a bi- and a tridentate phosphine ligand, were prepared and investigated by vibrational and (31)P NMR spectroscopy. As a tridentate ligand bis(2-diphenylphosphinoethyl)phenylphosphine (dpepp) has been employed. The three different bidentate ligands are 1,2-bis(diethylphosphino)ethane (depe), 1,2-bis(diphenylphosphino)ethane (dppe), and R-(+)-1,2-bis(diphenylphosphino)propane (1,2-dppp). N-N as well as metal-N vibrations of 1-3 are identified and interpreted in terms of the geometric and electronic structures of the complexes. (31)P NMR spectra are recorded and fully analyzed. Moreover, correlation spectroscopy (COSY)-45 measurements are performed to determine the relative signs of coupling constants. Special attention is directed to a detection of different isomers and their (31)P NMR, as well as vibrational spectroscopic properties. The implications of the results for the area of synthetic nitrogen fixation with phosphine complexes are discussed.     

Synthesis, structure, and characterization of molybdenum(VI) imido complexes with N-salicylidene-2-aminophenol

Diimido complexes of the type Mo(NAr)2Cl2(dme) (dme = 1,2-dimethoxyethane) react with N-salicylidene-2-aminophenol (sapH2) in methanol in the presence of 2 equiv of triethylamine to form complexes with the general formula Mo(NAr)(1,2-OC6H4NH)(sap). The structures of three of these compounds (NAr = 2,6-dimethylphenylimido (1), 2,4,6-trimethylphenylimido (2), 2-tert-butylphenylimido3) have been determined by X-ray crystallography. The coordination sphere around the Mo is a distorted octahedron. The oxygen from the 2-aminophenol is trans to the imido nitrogen, whereas the amido nitrogen and the tridentate sap occupy the four equatorial positions. The Mo-N-C imido linkages have angles of 167.5(2) degrees (1), 163.2(2) degrees (2), and 162.4(1) degrees (3). A precursor complex to the imido-amido complex, Mo(NAr)(sap)(OCH3)2 (4, NAr = 2,4,6-trimethylphenylimido), has been isolated and characterized. Compound 4 reacts with 2-aminophenol to form 2, with 2-aminothiophenol to form Mo(NAr)(1,2-SC6H4NH)(sap) (5), with catechol to form Mo(NAr)(1,2-OC6H4O)(sap) (6), with naphthalene-2,3-diol to form Mo(NAr)(naphthalene-2,3-diolate)(sap) (7), with 1,2-benzenedithiol to form Mo(NAr)(1,2-SC6H4S)(sap) (8), and with 1,2-phenylenediamine to form Mo(NAr)(1,2-HNC6H4NH)(sap) (9). The structures of compounds 5-9 have been determined by X-ray crystallography. With the exception of compound 8, the structures are similar to those of 1,2, and 3, with the bidentate ligand occupying one axial and one equatorial position. In 8, 1,2-benzendithiolate occupies two equatorial positions, and the nitrogen from sap is located trans to the imido nitrogen. All complexes were characterized by 1H NMR spectroscopy, cyclic voltammetry, and UV-vis spectroscopy. When a solution of 4 is exposed to moisture-containing air, MoO2(sap)(CH3OH) (10) is formed. The structure of 10 was also determined.     

Platinum complexes of dibenzo[1,2]dithiin, dibenzo[1,2]dithiin oxides and related polyaromatic hydrocarbon ligands

The synthesis of platinum bisphosphine complexes of biphenyl- 2,2'-dichalcogenates and the oxides of dibenzo[1,2]dithiin and related ligand systems by oxidative addition to [Pt(PPh(3))(4)] is reported. We also describe the synthesis of a new compound, dibenzothiophen-4-yldiselenide and its simple platinum complex (obtained by oxidative addition). All complexes have been fully characterised, principally by using multinuclear NMR spectroscopy and in six cases by means of single-crystal X-ray diffraction studies. The majority are simple S/S or Se/Se complexes, however the addition of dibenzo[1,2]dithiin trioxide to [Pt(PPh(3))(4)] gives a bimetallic system, [Pt[2-[S(O)],2'-[S(O)(2)]-biphen}(PPh(3))](2), containing a central Pt(2)S(2)O(2) core in which the ligand behaves as a tridentate S,S,O donor.     

Reaction of [M(eta3-allyl)(eta2-amidinato)(CO)2(pyridine)] complexes (M = Mo, W) with bidentate ligands: nitrogen donor vs. phosphorus donor

The reactivity of amidinato complexes of molybdenum and tungsten bearing pyridine as a labile ligand, [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)(pyridine)](M = Mo; 1-Mo, M = W; 1-W), toward bidentate ligands such as 1,10-phenanthroline (phen) and 1,2-bis(diphenylphosphino)ethane (dppe) was investigated. The reaction of 1 with phen at ambient temperature resulted in the formation of monodentate amidinato complexes, [M(eta(3)-allyl)(eta(1)-amidinato)(CO)(2)(eta(2)-phen)](M = Mo; 2-Mo, M = W; 2-W), which has pseudo-octahedral geometry with the amidinato ligand coordinated to the metal in an eta(1)-fashion. The phen ligand was located coplanar with two CO ligands and the eta(1)-amidinato ligand was positioned trans to the eta(3)-allyl ligand. In solution, both complexes 2-Mo and 2-W showed fluxionality, and complex 2-Mo afforded allylamidine (3) on heating in solution. In the reaction of 1 with dppe at ambient temperature, the simple substitution reaction took place to give dppe-bridged binuclear complexes [{M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)}(2)(mu-dppe)](M = Mo; 5-Mo, M = W; 5-W), whereas mononuclear monocarbonyl complexes [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(eta(2)-dppe)](M = Mo; 6-Mo, M = W; 6-W) were obtained under acetonitrile- or toluene-refluxing conditions. Mononuclear complex 6 was also obtained by the reaction of binuclear complex 5 with 0.5 equivalents of dppe under refluxing in acetonitrile or in toluene. The X-ray analyses and variable-temperature (31)P NMR spectroscopy of complex 6 indicated the existence of the rotational isomers of the eta(3)-allyl ligand, i.e., endo and exo forms, with respect to the carbonyl ligand. The different reactivity of complex 1 toward phen and dppe seems to have come from the difference in the pi-acceptability of each bidentate ligand.     

Factors that influence the antiproliferative activity of half sandwich Ru(II)-[9]aneS3 coordination compounds: activation kinetics and interaction with guanine derivatives

Half sandwich Ru(ii)-[9]aneS3 complexes ([9]aneS3 = 1,4,7-trithiacyclononane) are being studied for their antiproliferative activity. We investigated here the activation kinetics of three such complexes, namely [Ru([9]aneS3)(en)Cl](PF(6)) (1), [Ru([9]aneS3)(bpy)Cl](PF(6)) (2) and [Ru([9]aneS3)(pic)Cl] (3) (en = 1,2-diaminoethane, pic = picolinate), and their interaction with DNA model bases. The aim of the study was to assess how they are affected by the nature and charge of the chelating ligand. The model reactions of 1-3 with the guanine derivatives 9-methylguanine (9MeG), guanosine (Guo), and guanosine 5'-monophosphate (5'-GMP) were studied by NMR spectroscopy. All reactions lead, although with different rates and to different extents, to the formation of monofunctional adducts with the guanine derivatives N7-bonded to the Ru center. Two products, the complexes [Ru([9]aneS3)(en)(9MeG-N7)](PF(6))(2) (4) and [Ru([9]aneS3)(pic)(9MeG-N7)](PF(6)) (10), were structurally characterized also by X-ray crystallography. The structure of 4 is stabilized by strong intramolecular H-bonding between an NH of en and the carbonyl O6 of 9MeG. The kinetics of aquation and anation of complexes 2 and 3, as well as the kinetics and the mechanism of the reaction of complexes 1-3 with the biologically more relevant 5'-GMP ligand were studied by UV-Vis spectroscopy. The rate of the reaction of 1-3 with 5'-GMP depends on the nature of the chelating ligand rather than on the charge of the complex, decreasing in the order 3≈2 > 1. The measured enthalpies and entropies of activation (ΔH(≠) > 0, ΔS(≠) < 0) support an associative mechanism for the substitution process.     

Zeolitic boron imidazolate frameworks with 4-connected octahedral metal centers

Solvent selection! The organically templated co-assembly between tetrahedral [B(imidazolate)(4) ](-) and [Co(ac)](+) units leads to two previously unknown zeolitic boron imidazolate frameworks with ACO and ABW topologies (denoted BIF-22 and BIF-23; e-urea=ethyleneurea), respectively. BIF-22 is chiral and shows interesting CO(2) selectivity over N(2) and CH(4) .     

Atropisomeric discrimination in new Ru(II) complexes containing the C(2)-symmetric didentate chiral phenyl-1,2-bisoxazolinic ligand

A new family of Ru(II) complexes containing the tridentate meridional 2,2':6',2'-terpyridine (trpy) ligand, a C(2)-symmetric didentate chiral oxazolinic ligand 1,2-bis[4'-alkyl-4',5'-dihydro-2'-oxazolyl]benzene (Phbox-R, R = Et or iPr), and a monodentate ligand, of general formula [Ru(Y)(trpy)(Phbox-R)](n+) (Y = Cl, H(2)O, py, MeCN, or 2-OH-py (2-hydroxypyridine)) have been prepared and thoroughly characterized. In the solid state the complexes have been characterized by IR spectroscopy and by X-ray diffraction analysis in two cases. In solution, UV/Vis, cyclic voltammetry (CV), and one-dimensional (1D) and two-dimensional (2D) NMR spectroscopy techniques have been used. We have also performed density functional theory (DFT) calculations with these complexes to interpret and complement experimental results. The oxazolinic ligand Phbox-R exhibits free rotation along the phenyloxazoline axes. Upon coordination this rotation is restricted by an energy barrier of 26.0 kcal mol(-1) for the case of [Ru(trpy)(Phbox-iPr)(MeCN)](2+) thus preventing its potential interconversion. Furthermore due to steric effects the two atropisomers differ in energy by 5.7 kcal mol(-1) and as a consequence only one of them is obtained in the synthesis. Subtle but important structural effects occur upon changing the monodentate ligands that are detected by NMR spectroscopy in solution and interpreted by using their calculated DFT structures.     

Synthesis, characterization, antioxidant activities, and DNA-binding studies of (E)-N'-[1-(pyridin-2-yl)ethylidene]isonicotinohydrazide and its Pr(III) and Nd(III) complexes

A new ligand, (E)-N'-[1-(pyridin-2-yl)ethylidene]isonicotinohydrazide (HL), was prepared by condensation of 2-acetylpyridine and isonicotinohydrazide in ethanol. Its two lanthanide(III) complexes, [Nd(III)(L)(2)(NO(3))(CH(3)OH)(2)]·CH(3)CH(2)OH (1), and [Pr(III)(L)(2)(NO(3))(CH(3)OH)(2)]·CH(3)CH(2)OH (2), have been synthesized and characterized on the basis of element analyses, molar conductivities and IR spectra. The structure of complex 2 has been confirmed by X-ray diffraction. In addition, the DNA-binding properties of the two complexes have been investigated by electronic absorption spectroscopy, fluorescence spectroscopy, circular dichroic (CD) spectroscopy and viscosity measurements. The experimental results suggest that the two complexes bind to DNA via a groove binding mode, and the binding affinity of complex 2 is higher than that of complex 1. Furthermore, the antioxidant activities (superoxide and hydroxyl radical) of the ligand and its metal complexes were determined by spectrophotometry methods in vitro. These complexes were found to possess potent antioxidant activity and be superior to standard antioxidant like mannitol.     

含杂环卡宾碳的铁羰基簇合物的结构化学研究Ⅱ．—Fe_3(CO)_8[:CNHC(S)C(CH_3)_2NH]的合成和晶体结构

Ｆｅ３（ＣＯ）＿（１２）和取代２，４＿二硫代乙内酰脲反应，得到新的取代物Ｆｅ３（ＣＯ）＿８－［：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ＿３）＿２ＮＨ］（μ＿３－Ｓ）＿２，并进行了ＩＲ、１￣ＨＮＭＲ、ＭＳ表征，测定了它的分子和晶体结构，讨论了杂环卡宾碎片：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ＿３）＿２ＮＨ的取代位置，它是通过卡宾碳原子与Ｆｅ配位。     

XAS characterization of end-on and side-on peroxoiron(III) complexes of the neutral pentadentate N-donor ligand N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine

Peroxo intermediates are implicated in the catalytic cycles of iron enzymes involved in dioxygen metabolism. X-ray absorption spectroscopy has been used to gain insight into the iron coordination environments of the low-spin complex [Fe(III)(Me-TPEN)(eta(1)-OOH)](2+)(1) and the high-spin complex [Fe(III)(Me-TPEN)(eta(2)-O(2))](+)(2)(the neutral pentadentate N-donor ligand Me-TPEN =N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine) and obtain metrical parameters unavailable from X-ray crystallography. The complexes exhibit relatively large pre-edge peak areas of approximately 15 units, indicative of iron centers with significant distortions from centrosymmetry. These distortions result from the binding of peroxide, either end-on hydroperoxo for 1 (r(Fe-O)= 1.81A) or side-on peroxo for 2 (r(Fe-O)= 1.99 A). The XAS analyses of 1 strongly support a six-coordinate low-spin iron(III) center coordinated to five nitrogen atoms from Me-TPEN and one oxygen atom from an end-on hydroperoxide ligand. However, the XAS analyses of 2 are not conclusive: Me-TPEN can act either as a pentadentate ligand to form a seven-coordinate peroxo complex, which has precedence in the DFT geometry optimization of [Fe(III)(N4Py)(eta(2)-O(2))](+)(the neutral pentadentate N-donor ligand N4Py =N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), or as a tetradentate ligand with a dangling pyridylmethyl arm to form a six-coordinate peroxo complex, which is precedented by the crystal structure of [Fe(2)(III)(Me-TPEN)(2)(Cl)(2)(mu-O)](2+).     

Ruthenium-olefin complexes: effect of ligand variation upon geometry

The development of a model system to study ruthenium-olefin complexes relevant to the mechanism of olefin metathesis has been reported recently. Upon addition of the ligand precursor 1,2-divinylbenzene to [RuCl(2)(Py)(2)(H(2)IMes)(==CHPh)] (H(2)IMes=1,3-dimesityl-4,5-dihydroimidazol-2-ylidene), two ruthenium-olefin adducts are formed. Based on (1)H NMR spectroscopy experiments and X-ray crystallographic analysis, these complexes are assigned as side-bound isomers in which the olefin and H(2)IMes ligands are coordinated cis to each other. Herein is reported an investigation of the generality of these observations through variation of the N-heterocyclic carbene ligand and the ligand precursor.     

New ruthenium(II) complexes with enantiomerically pure bis- and tris(pinene)-fused tridentate ligands. Synthesis, characterization and stereoisomeric analysis

A new set of Ru-Cl complexes containing either the pinene[5,6]bpea ligand (L1) or the C3 symmetric pinene[4,5]tpmOMe (L2) tridentate ligand in combination with the bidentate (B) 2,2'-bipyridine (bpy) or 1,2-diphenylphosphinoethane (dppe) with general formula [RuCl(L1 or L2)(B)](+) have been prepared and thoroughly characterized. In the solid state, X-ray diffraction analysis techniques have been used. In solution, cyclic voltammetry (CV) and 1D and 2D NMR spectroscopy have been employed. DFT calculations have been also performed on these complexes and their achiral analogues previously reported in our group, to interpret and complement experimental results. Whereas isomerically pure complexes ([Ru(II)Cl(L2)(bpy)](BF4), 5 and [Ru(II)Cl(L2)(dppe)](BF4), 6) are obtained when starting from the highly symmetric [Ru(III)Cl3(L2)], 2, isomeric mixtures of cis, fac-[Ru(II)Cl(L1)(bpy)](BF4) (3b/3b'), trans,fac- (3a) and up/down,mer- (3c, 3d) isomers are formed when bpy is added to the less symmetric [Ru(III)Cl3(L1)], 1, in contrast to the case of the bulky dppe ligand that, upon coordination to 1, leads to the trans,fac-[Ru(II)Cl(L1)(dppe)](BF4) (4a) complex as a sole isomer due to steric factors.     

Syntheses and Structures of Two Ruthenium(III)Complexes [Ru(PPh_3)_2(S_2CNR_2)Cl_2]·CH_2Cl_2(R=Et and ~iPr)

Oxidation reaction of [Ru(PPh_3)_3Cl_2] with tetraethylthiuram disulfide[Et_2NCS_2]_2 or tetra-iso-pmpylthiumm disulfide[~iPr_2NCS_2]_2 afforded mthenium(Ⅲ)complexes[Ru(PPh_3)_2(S_2CNR_2)cl_2]·CH2Cl2(R=Et 1,~iPr 2)which were characterized by single-crystal X-ray diffraction.Complex 1 crystallizes in triclinic,space group Pīwith a=11.5065(6),b=12.1458(7),C=18.0034(9)(A),α=109.380(4),β=95.279(4),γ=97.969(4)°,ν=2324.8(2)(A)~3 and Z=2.Complex 2 belongs to the monoclinic system,space group P21/n with a=12.5752(3),b=20.7562(5),e=17.6821(3)(A),β=105.934(1)°,ν=4437.94(17)(A)~3 and Z=4.Both mononuclear complexes 1 and 2 have an octahedral configuration around the central ruthenium atom which is bonded to one chelated dithiocarbamate ligand,two PPh_3 ligands in mutually tram and two chlorides in mutually cis positions.The average Ru-S,Ru-P and Ru-Cl bond lengths are 2.377(2),2.412(2)and 2.369(2)(A) for 1,and 2.376(2),2.414(1)and 2.383(2)(A) for 2,respectively.The electrochemical properties of these two complexes were studied in CH_2Cl_2 solution by cyclic voltammetry.     

Synthesis of palladium(II) complexes containing a new alpha-D-xylofuranose-modified diphosphine and their application as catalyst precursors in the co- and terpolymerization of CO-ethene and propene

The diphosphine 3,5-dideoxy-1,2-O-isopropylidene-3,5-bis(di(2-methoxyphenyl)phosphanyl)-alpha-D-xylofuranose (o-MeO-xylophos), which differs from the known 3,5-dideoxy-1,2-O-isopropylidene-3,5-bis(diphenylphosphanyl)-alpha-D-xylofuranose (xylophos) by the presence of 2-methoxy substituents on the P-aryl rings, has been synthesized and characterized. These two ligands have been employed to stabilize the Pd(II) complexes [PdCl2(o-MeO-xylophos)] (1a), [PdCl2(xylophos)] (2a), [PdClMe(o-MeO-xylophos)] (1b), [PdClMe(xylophos)] (2b), [Pd(OTs)(H2O)(o-MeO-xylophos)](OTs) (1c) and [Pd(OTs)(H2O)(xylophos)](OTs) (2c). All complexes have been characterized by multinuclear-NMR spectroscopy. The solid-state structure of 1a has been determined by a single crystal X-ray analysis. The Pd-aqua complexes 1c and 2c have been employed to catalyse the CO-ethene and CO-propene copolymerization as well as the CO-ethene-propene terpolymerization reaction in MeOH. The catalytic activity and the molecular weight of the polyketones have been compared to those of the products obtained with analogous catalysts, [Pd(H2O)2(o-MeO-dppp)](OTs)2 (3c) and [Pd(H2O)(OTs)(dppp)](OTs) (4c), bearing the classical 1,3-bis(diphenylphoshino)propane ligand (dppp). Under comparable catalytic conditions, all catalysts produce structurally similar polymeric materials, with 1c yielding the largest propene incorporation as well as the highest productivity of low-molecular-weight terpolymers.