共查询到18条相似文献,搜索用时 171 毫秒
1.
柔性圆柱涡激振动流体力系数识别及其特性 总被引:2,自引:0,他引:2
涡激振动是诱发海洋立管、浮式平台系泊缆和海底悬跨管道等柔性圆柱结构疲劳损伤的重要因素.目前,海洋工程中用于柔性圆柱涡激振动预报的流体力系数主要来源刚性圆柱横流向受迫振动的实验数据,存在一定缺陷和误差.本文综合考虑横流向与顺流向振动耦合作用,建立了柔性圆柱涡激振动流体力模型,运用有限元法和最小二乘法确定升力系数、脉动阻力系数和附加质量系数.为了准确识别柔性圆柱涡激振动流体力系数,设计并开展了拖曳水池模型实验,实验用柔性圆柱模型的质量比为1.82,长径比为195.5.通过与刚性圆柱流体力系数对比,深入分析了柔性圆柱流体力系数的特性.结果表明:柔性圆柱在一阶模态控制区,流体力系数随约化速度变化趋势与刚性圆柱大致相似;二阶模态控制区,升力系数和脉动阻力系数显著增大;附加质量系数在响应频率较低时与振动位移的相关性增强;当响应频率较低时,振动位移较大区域为能量耗散区,当响应频率较高时,振动位移较大区域为能量输入区. 相似文献
2.
立管是海洋工程中输送油气或其他矿产资源的必备结构, 外部洋流引起的立管涡激振动影响着立管的疲劳寿命, 危害深海资源开发. 本文基于欧拉?伯努利梁方程, 结合半经验时域水动力模型, 建立剪切流与内流耦合作用下海洋立管涡激振动预报模型, 运用有限元方法和Newmark-β逐步积分法求解方程, 首先将数值模拟结果与实验数据进行对比, 验证模型正确性. 然后, 运用此模型, 对剪切流作用下含内流的顶张立管在不同内流速度和密度下的横向涡激振动响应特性进行研究, 主要分析了立管的横向振动模态、振动频率以及均方根位移等涡激振动参数随内流速度和密度等参数的变化规律. 结果表明, 在剪切流场中, 含内流海洋立管在横向上表现出多模态多频率的涡激振动;立管横向振动的最大均方根位移随内流速度和密度的增大而增大, 特别是当内流速度较大时, 横向最大均方根位移增大明显;立管横向振动的主导频率随内流速度和密度的增大而减小, 并且内流密度的增大同样会引起模态转换和频率转换. 相似文献
3.
采用浸入边界法对细长柔性圆柱在线性剪切流条件下的涡激振动进行三维数值模拟.细长柔性圆柱振动采用三维索模型模拟,其两端铰接,质量比为6,长细比为50,无量纲顶张力为496.来流为线性剪切流,剪切率从0到0.024变化,最大雷诺数为250.研究发现:剪切流作用下柔性立管横流向振动表现为驻波模式,而顺流向振动表现为行波与驻波混合模式.随着剪切率增大,振动频谱呈现多频响应,振动能量逐渐向低频转移.阻力系数平均值随着展向变化,脉动阻力系数和升力系数的均方根值均表现为"双峰"模式.流固能量传递系数沿立管轴向的分布表明,振动激励区集中于高流速区,而振动阻尼区多位于低流速区.剪切率较小时,圆柱的泻涡为平行交叉模式;剪切率较大时,圆柱的泻涡为倾斜泻涡模式,且由于泻涡频率沿立管轴向变化,尾流发生涡裂现象,形成泻涡频率不同的胞格结构. 相似文献
4.
海洋热塑性增强管(RTP)涡激振动数值计算 总被引:1,自引:1,他引:0
基于Van der Pol尾流振子模型和多体系统传递矩阵法(transfer matrix method for multibody systems,MSTMM),建立了可以快速预测海洋热塑性增强管(reinforced thermoplastic pipe, RTP)振动特性和涡激振动响应的动力学模型.仿真结果与ANSYS软件仿真结果以及文献实验数据对比,验证了本文模型的准确性.研究了考虑RTP立管刚性接头,不同顶张力,不同来流分布等情况对RTP立管涡激振动响应的影响.计算结果表明:流速越大,立管涡激振动激发出的模态越高;立管涡激振动主要受低阶模态控制;立管的刚性接头对立管的湿模态影响较小,但是对较高阶模态为主所激发出的涡激振动振幅分布影响较大;剪切流对沿立管轴向的涡激振动振幅分布影响较大,低流速能量小所引起的涡激振动幅值较小,但是当剪切流流速达到能激发出较高阶模态时,相比同等流速的均匀流所引起的涡激振动振幅要大. 相似文献
5.
不同剪切率来流作用下柔性圆柱涡激振动数值模拟 总被引:1,自引:0,他引:1
采用浸入边界法对细长柔性圆柱在线性剪切流条件下的涡激振动进行三维数值模拟。细长柔性圆柱振动采用三维索模型模拟,其两端铰接,质量比为6,长细比为50,无量纲顶张力为496。来流为线性剪切流,剪切率从0到0.024变化,最大雷诺数为250。研究发现:剪切流作用下柔性立管横流向振动表现为驻波模式,而顺流向振动表现为行波-驻波混合模式。随着剪切率增大,振动频谱呈现多频响应,振动能量逐渐向低频转移。阻力系数平均值随着展向变化,脉动阻力系数和升力系数的均方根值均表现为“双峰”模式。流固能量传递系数沿立管轴向的分布表明,振动激励区集中于高流速区,而振动阻尼区多位于低流速区。剪切率较小时,圆柱的泻涡为平行交叉模式;剪切率较大时,圆柱的泻涡为倾斜泻涡模式,且由于泻涡频率沿立管轴向变化,尾流发生涡裂现象,形成泻涡频率不同的胞格结构。 相似文献
6.
深海采矿系统中悬臂式立管涡激振动分析 总被引:1,自引:0,他引:1
不同于传统的海洋立管, 深海采矿系统中的垂直提升管道可以被视为一个底部无约束的柔性悬臂式立管, 工作过程中同样面临涡激振动和柔性变形问题. 本文采用一种无网格离散涡方法和有限元耦合的准三维时域求解数值模型, 系统性地研究了不同流速下悬臂式立管的涡激振动问题. 结果表明: 悬臂式立管的横向振动模态阶数随折合速度增加而增大, 在一定折合速度范围内主导振动模态保持不变; 当主导模态转变时, 对应的横向振幅会发生突降, 但是当新的高阶模态被激发后, 立管振幅随来流速度增加而再次逐渐增大; 在相同的振动模态下, 立管底部位移均方根值随折合速度线性增加, 主导振动频率在模态转变时会出现跳跃现象; 特别地, 本文讨论了三阶主导模态下悬臂式立管的振动响应, 无约束的立管底部呈现出较大的振动能量, 且振幅的驻波特征随折合速度增加而逐渐增强; 本文比较了两端铰支立管与悬臂式立管的涡激振动响应特征, 两者在振幅和主导振动频率两方面均表现出了相同的变化趋势. 相似文献
7.
8.
海洋柔性结构涡激振动的流固耦合机理和响应 总被引:1,自引:0,他引:1
对近几十年来国内外在涡激振动的基础研究包括机理认识和动响应分析等方面的进展进行了论述,尤其针对海洋油气平台中的立管、隔水管等细长柔性结构的涡激振动.描述了涡激振动这种典型的非线性流固耦合现象所具有的特征,包括自激、自限制、展向相关、尾迹水动力与结构动力的流固耦合等及其主要影响参数.介绍了目前常用的结构响应预测方法和相关实验.通过讨论当前理论研究和实际工程中的热点问题,诸如多模态宽带振动、浮体运动与水下立管的耦合、响应抑制措施、双向振动、高雷诺数下的大尺度物理实验等,对今后该领域的研究方向进行了力所能及的展望. 相似文献
9.
为研究输运不同流体的海洋立管在海流作用下的振动规律,在大型波浪流水槽中进行涡激振动模型实验。实验分别将四种不同质量比的立管模型竖直固定于支架上,立管外部承受不同速度的流体作用,上端施加顶张力。立管模型上均匀布置六个测点,根据每个测点布置的两个应变计,分别测得来流向和横向两个方向振动响应。通过小波变换对实验数据进行去噪处理,利用振型分解法求解立管各点涡激振动位移。考察输运不同流体对立管自振频率以及涡激振动响应的影响,并利用雨流计数法对模型进行疲劳分析。实验结果表明,随质量比增加立管涡激振动频率降低;低质量比的立管更容易产生大位移。 相似文献
10.
11.
流致振动现象广泛存在于机械、航空、土木和石油等重要工程领域, 为防止工程结构因流致振动行为而造成疲劳破坏, 有必要对稳定性、动力学响应及其振动控制做深入研究. 本文提出了一种由弹簧和质量块构成的非线性吸能器(nonlinear targeted energy transfer, NTET), 研究了该非线性吸能器对弹性支承圆柱体涡激振动的被动控制影响机制. 基于能量法推导了圆柱体涡激振动非线性被动控制的耦合动力学方程, 通过设计非线性弹簧?质量块构型的NTET, 进一步开展了涡激振动控制的实验研究, 并与理论预测结果进行了较好的对比, 获得提升涡激振动控制效果的最佳参数值. 研究发现, NTET的质量、弹簧刚度以及弹簧预应力等参数会对涡激振动控制效果产生显著的影响. 本文研究结果表明, 该耦合系统中圆柱体和NTET均表现出周期性的稳态振动响应, NTET质量的改变会显著影响系统的耦合频率. 在无预应力状态下, NTET质量越大、刚度越小时, 有更好的减振效果. 当弹簧预应力逐渐增大时, NTET的非线性刚度逐渐变弱, 会降低涡激振动控制性能. 参数分析表明: 随着涡激振动控制性能的提升, 圆柱体的振幅逐渐较小, NTET的振幅逐渐增大, 能量传递效率逐渐提高. 研究结果可为工程中涡激振动控制策略的高效设计提供有用的理论支撑和实验数据. 相似文献
12.
Vortex-induced vibration (VIV) of long flexible cylindrical structures (e.g. risers, pipelines, tendons, mooring lines) enduring ocean currents is ubiquitous in the offshore industry. Though significant effort has gone into understanding this complicated fluid–structure interaction problem, major challenges remain in modeling and predicting the response of such structures (for example a riser). The work presented in this paper provides a systematic approach to estimate and analyze the vortex-induced motions of a marine riser. A systematic framework is developed, which allows reconstruction of the riser motion from a limited number of sensors placed along its length. A full reconstruction criterion is developed, which classifies when the measurements from the sensors contain all information pertinent to riser VIV response, and when they do not, in which case additional, analytical methods must be employed. Reconstruction methods for both scenarios are developed and applied to experimental data. Finally, a systematic study on the error during the reconstruction is also undertaken. The methods developed in this paper can be applied to: improve understanding of the vortex shedding mechanisms, including the presence of traveling waves and higher-harmonic forces; develop tools for in-situ estimation of fatigue damage on marine risers; and estimate the vortex-induced forces on marine risers. 相似文献
13.
14.
H. Mukundan Y. Modarres-Sadeghi J.M. Dahl F.S. Hover M.S. Triantafyllou 《Journal of Fluids and Structures》2009,25(4):617-628
Long flexible cylinders (e.g., risers, tendons and mooring lines) exposed to the marine environment encounter ocean currents leading to vortex-induced vibration (VIV). These oscillations, often driven at high frequencies over extended periods of time, may result in structural failure of the member due to fatigue damage accumulation. Recent developments in instrumentation and installation of data acquisition systems on board marine risers have made accurate measurement of riser responses possible. This paper aims at using the data from these data acquisition devices (typically strain gages and accelerometers) in order to understand the evolution of the riser VIV, with the final aim of estimating the fatigue damage. For this purpose we employ systematic techniques to reconstruct riser VIV response using the data from the available sensors. The reconstructed riser response allows estimation of the dynamic axial stresses due to bending and consequently the estimates of the fatigue damage along the entire riser. The above methods can take into account the fatigue damage arising from complicated riser motions involving the presence of traveling waves even with the use of very few sensors. An alternate approach using a Van der Pol wake oscillator model is also explored to obtain fatigue life estimates caused by riser VIV. 相似文献
15.
为了研究宽幅流线型箱梁断面的涡振性能,以某跨越长江的大跨悬索桥为背景,进行1∶50节段模型风洞试验。分析了检修轨道、人行道栏杆等涡振敏感构件的影响,研究了改变人行道栏杆形式、附加斜腹板导流板以及风嘴分流板等气动措施的制振效果。研究结果表明,宽幅箱梁涡振性能随来流攻角增大而逐渐变差,且由于漩涡Strouhal数的变化易诱发多区间涡振,扭转涡振幅值随阻尼增加线性衰减显著。人行道栏杆是此类断面的涡振敏感构件,去掉栏杆踢脚石能明显改善涡振性能;斜腹板导流板对改善其涡振性能效果微弱;风嘴分流板具有显著的制振效果,不仅能有效地抑制主梁涡振的发生,且能提高颤振临界风速。 相似文献
16.
H. Mukundan F. Chasparis F.S. Hover M.S. Triantafyllou 《Journal of Fluids and Structures》2010,26(1):160-175
Significant past effort has gone into understanding the complicated flow–structure interaction problem of vortex-induced vibration (VIV) of long flexible cylindrical structures (e.g., risers, mooring lines, tendons, conductors) in the ocean environment. However, major challenges persist with regard to riser VIV modeling and response prediction. The existing prediction schemes are based on a number of hypotheses, experimental facts and data like strip theory, energy balance, correlation length and, most importantly, the use of lift force coefficient databases. Recent advances in observing the VIV motions on experimental risers with high confidence shows that some of these assumptions may not be valid. One important source of the discrepancies between theoretical estimates and experimental observations arise from the use of experimentally obtained lift coefficient databases. These databases were obtained under the laboratory conditions of limited Reynolds number, and under the assumption that the cross-flow motions are not influenced by restraining the in-line motions. In this paper we develop a method to improve the modeling capability of riser VIV by extracting empirical lift coefficient databases from field riser VIV measurements. The existing laboratory-based lift coefficient databases are represented in a flexible parameterized form using a set of carefully chosen parameters. Extraction of the lift coefficient parameters is posed as an optimization problem, where the objective is to minimize the error between the prediction using a theoretical model and the experimental data. Application of the method to data from the Norwegian Deepwater Programme experiments shows that the new optimal databases significantly reduce the error in estimating the riser VIV cross-flow response. 相似文献
17.
An experiment was conducted in a combined wave–current water flume on two tandem risers subjected to uniform flow. The riser model has an effective length of 2.0 m. The aspect ratio is 111.11. The upstream riser is smooth and the downstream riser fitted with three-strand helical strakes with pitch 17.5D and height 0.25D. By varying the external flow velocities and spacing ratios, through comparisons with the dynamic response of isolated smooth and isolated straked riser, the paper observe how interference effect impacts the dynamic characteristics and dynamic response of two risers in tandem arrangement, reveal how the suppression efficiency of the three-strand helical strakes responds to spacing ratio and external flow velocity, and explore the wake excitation effect of inter-riser fluids on the downstream riser and their dynamic feedback to the upstream riser. The results show that the dominant frequency of the upstream smooth riser is sensitivity to the change of the spacing ratio is low, and the displacement response is offset or enhanced in different degree due to the difference of the interference efficiency. The downstream straked riser dominates frequency and displacement higher than the isolated straked riser. The wake vortex of the upstream smooth riser acts on the downstream riser, occupying a dominant position in the vibration of the downstream riser. It degrades the vibration suppression efficiency of the three-strand helical strakes: the suppression efficiency is the highest at spacing ratio of 8, being a merely 70.57%. With the increase of the spacing ratio, the CF displacement of the riser gradually decreases, and the IL displacement gradually increases. The interference efficiency partition and suppression efficiency at different spacing ratios reflects the dynamic feedback of the upstream smooth riser is much smaller than the interference effect of the downstream suppression riser. 相似文献
18.
内孤立波是一种发生在水面以下的在世界各个海域广泛存在的大幅波浪, 其剧烈的波面起伏所携带的巨大能量对以海洋立管为代表的海洋结构物产生严重威胁, 分析其传播演化过程的流场特征及立管在内孤立波作用下的动力响应规律对于海洋立管的设计具有重要意义. 本文基于分层流体的非线性势流理论, 采用高效率的多域边界单元法, 建立了内孤立波流场分析计算的数值模型, 可以实时获得内孤立波的流场特征. 根据获得的流场信息, 采用莫里森方程计算内孤立波对海洋立管作用的载荷分布. 将内孤立波流场非线性势流计算模型与动力学有限元模型结合来求解内孤立波作用下海洋立管的动力响应特征, 讨论了内孤立波参数、顶张力大小以及内部流体密度对立管动力响应的影响. 发现随着内孤立波波幅的增大, 海洋立管的流向位移和应力明显增大. 由于上层流体速度明显大于下层, 且在所研究问题中拖曳力远大于惯性力, 因此管道顺流向的最大位移发生在上层区域. 顶张力通过改变几何刚度阵的值进而对立管的响应产生明显影响. 对于弱约束立管, 内部流体的密度对管道的流向位移影响较小. 相似文献