Solid asymmetric electrochemical capacitors using proton-conducting polymer electrolytes

Solid asymmetric electrochemical capacitors (EC) using polyvinyl alcohol (PVA)–heteropoly acid (HPA) electrolytes and RuO₂–graphite electrodes were developed. The devices were about 0.2 mm thick and had a working voltage window of 0–1.5 V, 50% wider than that of any proton-conducting symmetric EC. Pseudocapacitance from HPA contributes to the total capacitance of the asymmetric EC within a certain potential window. The PVA–HPA polymers have been proven to function both as electrolyte and as pseudocapacitive electrode material in EC cells.     

Anhydrous proton-conducting polymeric electrolytes for fuel cells

The need to design proton-conducting electrolytes for fuel cells operating at temperatures of 120 degrees C and above has prompted the investigation of various "water-free" polymeric materials. The present study investigates the properties of "water-free" proton-conducting membranes prepared from high-molecular-weight polymeric organic amine salts. Specifically, the properties of bisulfates and dihydrogenphosphates of poly-2-vinylpyridine (P2VP), poly-4-vinylpyridine (P4VP), and polyvinylimidazoline (PVI) have been investigated over the temperature range of 25-180 degrees C. Nanocomposites of these polymeric organic amine salts and hydroxylated silica have also been investigated in this study. These polymers are found to be stable and proton-conducting at temperatures up to 200 degrees C. In all the polymer examples studied herein, the phosphates are more conducting than the bisulfates. The activation energy for ionic conduction was found to decrease with increasing temperature, and this is associated with the increased polymer mobility and ionization of the proton. This is confirmed by the high degree of motional narrowing that is observed in proton NMR experiments. The measured values of conductivity and the differences in pKa values of the polymeric organic amine and the mineral acid are clearly correlated. This observation provides the basis for the design of other water-free acid-base polymer systems with enhanced proton conductivity. The results presented here suggest that anhydrous polymer systems based on acid-base polymer salts could be combined with short-range proton conductors such as nanoparticulate silica to achieve acceptable conductivity over the entire temperature range.     

Heteropolyacid-encapsulated self-assembled materials for anhydrous proton-conducting electrolytes

The composite material of heteropolyacid (12-phosphotungstic acid; PWA) and polystyrene sulfonic acid (PSS) construct the PWA-encapsulated material by the self-assembly of -SO3H onto the PWA surface; as a result, the fast proton transfer occurred at the interface between the PWA and -SO3H, and the encapsulated material indicated the high anhydrous proton conductivity of 1 x 10(-2) S cm(-1) at 180 degrees C. These anhydrous proton-conducting materials without the existence of water molecules are quite different from customary ion-exchange membrane, such as Nafion, and may have advantages as an electrolyte membrane for polymer electrolyte membrane fuel cells operating at intermediate temperatures under anhydrous conditions but also for electrochemical devices including electrochromic displays, chemical sensors, and others.     

Red algae-derived k-carrageenan-based proton-conducting electrolytes for the wearable electrical devices

Journal of Solid State Electrochemistry - Proton-conducting non-porous nature of k-carrageenan-based flexible solid electrolytes was prepared by facile solution casting technique. Altering the...     

Versatile heat resistant solid electrolytes with performances of liquid electrolytes

The confinement of ionic liquids (room temperature molten salts) within a porous silica matrix was performed by a one-step non-hydrolytic sol–gel route, leading to hybrid materials featuring both the mechanic and transparency properties of silica gels and the high ionic conductivity of ionic liquids, as well as a thermal stability up to around 550 K. Butylmethylimidazolium [BMI] or butylpyridinium [BPy] as cations with bis(trifluorosulfonyl)imide [TFSI] or tetrafluoroborate [BF₄] as anions along with a silica matrix showed similar properties.     

Ethylene hydrogenation in electrochemical cell with solid proton-conducting electrolyte

The effect of electrochemical H⁺ pumping on the hydrogenation rate of ethylene on Ni electrode catalysts in a solid proton-conducting electrolyte cell has been studied.

---

Ni — .

     

Transformation of proton-conducting Perovskite-type into fluorite-type fast oxide ion electrolytes using a CO2 capture technique and their electrical properties

Fast oxide ion conducting Ce 1- x M x O 2-delta (M = In, Sm; x = 0.1, 0.2) and Ce 0.8Sm 0.05Ca 0.15O 1.825 were prepared from the corresponding perovskite-like structured materials with nominal chemical composition of BaCe 1- x M x O 3-delta and BaCe 0.8Sm 0.05Ca 0.15O 2.825, respectively, by reacting with CO 2 at 800 degrees C for 12 h. Powder X-ray diffraction (PXRD) analysis showed the formation of fluorite-type CeO 2 and BaCO 3 just after reaction with CO 2. The amount of CO 2 gained per ceramic gram was found to be consistent with the Ba content. The CO 2 reacted samples were washed with dilute HCl and water, and the resultant solid product was characterized structurally and electrically employing various solid-state characterization methods, including PXRD, and alternating current (ac) impedance spectroscopy. The lattice constant of presently prepared Ce 1- x M x O 2-delta and Ce 0.8Sm 0.05Ca 0. 15O 1.825 by a CO 2 capture technique follows the expected ionic radii trend. For example, In-doped Ce 0.9In 0.1O 1.95 (In (3+) (VIII) = 0.92 A) sample showed a fluorite-type cell constant of 5.398(1) A, which is lower than the parent CeO 2 (5.411 A, Ce (4+) (VIII) = 0.97 A). Our attempt to prepare single-phase In-doped CeO 2 samples at 800, 1000, and 1500 degrees C using the ceramic method was unsuccessful. However, we were able to prepare single-phase Ce 0.9In 0.1O 1.95 and Ce 0.8In 0.2O 1.9 by the CO 2 capture method from the corresponding barium perovskites. The PXRD studies showed that the In-doped samples are thermodynamically unstable above 800 degrees C. The ac electrical conductivity studies using Pt electrodes showed the presence of bulk, grain-boundary, and electrode contributions over the investigated temperature range in the frequency range of 10 (-2)-10 (7) Hz. The bulk ionic conductivity and activation energy for the electrical conductivity of presently prepared Sm- and (Sm + Ca)-doped CeO 2 samples shows conductivities similar to those of materials prepared by the ceramic method reported in the literature. For instance, the conductivity of Ce 0.8Sm 0.2O 1.9 using the CO 2 capture technique was determined to be 4.1 x 10 (-3) S/cm, and the conductivity of the same sample prepared using the ceramic method was 3.9 x 10 (-3) S/cm at 500 degrees C. The apparent activation energy of the area-specific polarization resistance for the symmetric cell (Sm,Sr)CoO 3- x |Ce 0.8Sm 0.2O 1.9|(Sm,Sr)CoO 3- x was determined to be 1 eV in air.     

Synthesis, electrochemical properties and self-assembly of a proton-conducting core-shell macromolecule

Let the protons flow: The synthesis of a core-shell macromolecule bearing phosphonic acids is presented. The rigid central core serves as a scaffold to stabilize the flexible polymer shells. Pronounced proton conductivity is obtained under humidified conditions. The self-assembly of such dendritic macromolecules by electrostatic interactions on a modified gold substrate is investigated and characterized.     

Determination of the effective concentration of free charge carriers in solid proton-conducting electrolytes

A method for the theoretical determination of the effective concentration of free charge carriers in solid proton-conducting electrolytes with the use of experimentally measured values of the electrical conductivity has been proposed. Polyantimonic acid has been considered as an example. It has been shown that the high electrical conductivity of solid proton-conducting electrolytes in comparison to other compounds with hydrogen bonds is due to the high concentration of effective free charge carriers and the low activation energy for the mobility of a proton.Translated from Teoreticheskaya i éxperimental'naya Khimiya, Vol. 24, No. 1, pp. 111–114, January–February, 1988.     

Synthesis and electrochemical characterization of aPEO-based polymer electrolytes

In this paper, the preparation and purification of an amorphous polymer network, poly[oxymethylene-oligo(oxyethylene)], designated as aPEO, are described. The flexible CH₂CH₂O segments in this host polymer combine appropriate mechanical properties, over a critical temperature range from −20 to 60 °C, with labile salt-host interactions. The intensity of these interactions is sufficient to permit solubilisation of the guest salt in the host polymer while permitting adequate mobility of ionic guest species. We also report the preparation and characterisation of a novel polymer electrolyte based on this host polymer with lithium tetrafluoroborate, LiBF₄, as guest salt. Electrolyte samples are thermally stable up to approximately 250 °C and completely amorphous above room temperature. The electrolyte composition determines the glass transition temperature of electrolytes and was found to vary between −50.8 and −62.4 °C. The electrolyte composition that supports the maximum room temperature conductivity of this electrolyte system is n = 5 (2.10 × 10⁻⁵ S cm⁻¹ at 25 °C). The electrochemical stability domain of the sample with n = 5 spans about 5 V measured against a Li/Li⁺ reference. This new electrolyte system represents a promising alternative to LiCF₃SO₃ and LiClO₄-doped PEO analogues.     

Al掺杂Ni(OH)2的结构及电化学性能

用化学共沉淀法合成了A l掺杂N i(OH)2,用XRD表征了合成样品的结构特征:研究了合成样品的循环伏安性能,以及用A l掺杂N i(OH)2为正极活性物质的Zn/N i试验电池的充放电性能。研究结果表明:所合成的A l掺杂N i(OH)2为具有α-型晶体结构的材料,A l掺杂N i(OH)2具有优良的电化学可逆性、良好的充放电性能和较好的电化学循环性能;A l掺杂N i(OH)2作为正极活性物质的Zn/N i试验电池等250次充放电循环容量保持率130.1%,最高放电比容量为420.5mAh/g。     

Functional mesoporous carbon nanotubes and their integration in situ with metal nanocrystals for enhanced electrochemical performances

Functional mesoporous carbon nanotubes (MCNTs) and their integration in situ with Pt nanocrystals (Pt/MCNTs) have been designed and successfully developed via a facile route, which exhibited enhanced performances in energy storage and conversion applications.     

Sn-O dual-doped Li-argyrodite electrolytes with enhanced electrochemical performance

As a type of candidate for all-solid-state Li batteries,argyrodite solid electrolytes possess high ionic conductivity,but poor compatibility against Li metal.He...     

Solid polymer electrochemical capacitors using heteropoly acid electrolytes

An electrochemical capacitor utilizing a polyvinyl alcohol (PVA) and H₄SiW₁₂O₄₀ (SiWA) solid polymer electrolyte was developed. The electrolyte was deposited via precursor solution coating followed by thermal pressing and exhibited an ionic conductivity of 0.01 S/cm. The electrolyte has also shown good stability and cycle life. The performance of the solid polymer electrolyte-based capacitor was characterized using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), and was compared to a similar capacitor with an aqueous electrolyte.     

Effects of structural properties of silicon carbide-derived carbons on their electrochemical double-layer capacitance in aqueous and organic electrolytes

High surface area silicon carbide-derived carbons (Si-CDCs) synthesized by chlorination of beta silicon carbide (βSiC) with two different particle sizes (6 μm and 50 nm) show different porosities with graphitic structure. Transmission electron microscopy, Raman spectroscopy and argon (Ar) and carbon dioxide (CO₂) sorption analyses are used to examine the textural properties of the Si-CDCs. The results show that the particle size of the precursor affects the surface area and porosity of carbons. Furthermore, an additional heat treatment of the Si-CDC with 50-nm particle size for 24 h at 1,000 °C results in a collapse of the pore structure and reduces the surface area. The capacitive behaviours are investigated in H₂SO₄ and in tetraethyl ammonium tetrafluoroborate (TEABF₄)/acetonitrile (AN). The electrochemical performance of the Si-CDCs is influenced by the particle size, surface area, pore volume and pore size distribution. The Si-CDCs exhibit capacitances in 1 M H₂SO₄ of up to 179 F g^?1 and very stable charge–discharge performance over 5,000 cycles. This study shows the crucial importance of ultramicropores less than 1 nm combined with nanosized particles for achieving high capacitance in aqueous electrolyte. Moreover, the graphitic degree at the surface of the Si-CDCs enhances considerably the rate capability and stability in both electrolytes.     

Electrical and electrochemical studies on magnesium ion-based polymer gel electrolytes

The development of polymer gel electrolyte system with high ionic conductivity is the main objective of polymer research. Electrochemical devices based on lithium ion-conducting polymer electrolyte are not safe due to the explosive nature of lithium. An attempt has been made to synthesize magnesium ion-conducting polymeric gel electrolytes, poly (vinylidene fluoride-co-hexafluoropropylene)–propylene carbonate–magnesium perchlorate, PVdF(HFP)-PC–Mg(ClO₄)₂ using standard solution-cast techniques. The maximum room temperature ionic conductivity of the synthesized electrolyte system has been observed to be 5.0 × 10⁻³ S cm⁻¹, which is quite acceptable from a device fabrication point of view. The temperature-dependent conductivity and the dielectric behavior were also analyzed. The pattern of the temperature-dependent conductivity shows the Arrhenius behavior. The dielectric constant ε _r and dielectric loss ε _i increases with temperature in the low-frequency region but almost negligible in the high-frequency region. This behavior can be explained on the basis of electrode polarization effects. The real part M _r and imaginary part M _i versus frequency indicate that the systems are predominantly ionic conductors. Further, the synthesized electrolyte materials have been checked for its suitability in energy storage devices namely redox supercapacitor with conducting polymer polypyrrole as electrode materials, and finally, it was observed that it shows good capacitive behavior in low-frequency region. Preliminary studies show that the overall capacitance of 22 mF cm⁻² which is equivalent to a single electrode specific capacitance of 117 F gm⁻¹ was observed for the above said supercapacitors.     

Hybrid electrochemical capacitors in aqueous electrolytes: Challenges and prospects

In an internal hybrid capacitor, at least one electrode displays battery-like charge/discharge and the other electrode stores charge reversibly at the electric double-layer (EDL). Recently, a plethora of hybrid cells in aqueous electrolytes have been proposed by coupling an EDL electrode with a battery electrode, the latter made from a variety of redox-active/redox-mediator species either dissolved in the electrolyte or adsorbed/immobilized in nanoporous electrodes. This review presents current opinions, discusses challenges, and supplies recommendation about the hybrid cells with aqueous electrolytes and carbon electrodes.     

pH-controlled morphological structure and electrochemical performances of polyaniline/nickel hexacyanoferrate nanogranules during electrochemical deposition

To explore the dependences of morphology and electrochemical performance of polyaniline/nickel hexacyanoferrate (PANI/NiHCF) nanogranules on pH value of the reaction system, electrodeposition of PANI/NiHCF nanogranules was performed across a pH range from 0 to 7 on carbon nanotubes (CNTs)-modified platinum substrate by cyclic voltammetry in a mixture of 0.002 mol L^?1 NiSO₄, 0.25 mol L^?1 Na₂SO₄, 0.002 mol L^?1 K₃Fe(CN)₆, and 0.01 mol L^?1 aniline solutions. The morphology and structure of PANI/NiHCF nanogranules were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy, respectively. The supercapacitive performances of the nanogranules were investigated with cyclic voltammetry (CV), charge/discharge tests, and electrochemical impedance spectroscopy (EIS). The results showed that the nanogranules with different morphology and sizes were obtained with the change of pH values from 0 to 7, which could control the mechanism of homogeneous or heterogeneous nucleation directly. The nanogranules were dispersed in matrix uniformly at pH 0 and pH 1, while the size of which decreased with the increase of pH values. The smooth cross-linking network structure was found from pH 2 to 7. The structure of PANI/NiHCF nanogranules had slightly changed from pH 0 to 7. PANI/NiHCF nanogranules had good electrochemical performance from pH 0 to 7 in a mixture of 0.5 mol L^?1 H₂SO₄ and 0.5 mol L^?1 KNO₃ solutions, and the highest specific capacitance value of 274 F g^?1 was obtained at current densities of 2 mA cm^?2 in neutral medium. PANI/NiHCF nanogranules had high stability in neutral medium after 2,000 cycles by CV.     

Preparation and electrochemical performances of carbon-coated nanoscale SnS for supercapacitors

Carbon-coated SnS as electrode materials for supercapacitor were synthesized by high-energy ball milling and following co-heating with polyvinyl alcohol. The morphology and structure of prepared carbon-coated SnS were studied by high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). Electrochemical investigation indicated that carbon-coated SnS presented preferable electrochemical performances than pristine SnS. In comparison to pristine SnS, carbon-coated SnS had better capacitive response in cyclic voltammetry and could deliver larger specific capacitance of 28.47 F/g in galvanostatical charge–discharge process. Enhanced conductivity of carbon-coated SnS revealed by Nyquist plots was considered to be responsible for its enhanced electrochemical performances.