Effect of morphology on ultrafast free carrier generation in polythiophene:fullerene organic solar cells

Despite significant study, the precise mechanisms that dictate the efficiency of organic photovoltaic cells, such as charge separation and recombination, are still debated. Here, we directly observe efficient ultrafast free charge generation in the absence of field in annealed poly(3-hexylthiophene):methanofullerene (P3HT:PCBM). However, we find this process is much less efficient in unannealed and amorphous regiorandom blends, explaining the superior short-circuit current and fill-factor of annealed RR-P3HT:PCBM solar cells. We use transient optical spectroscopy in the visible and near-infrared spectral region covering, but not limited to, the previously unobserved and highly relevant time scale spanning 1 to 100 ns, to directly observe both geminate and nongeminate charge recombination. We find that exciton quenching leads directly (time scale less than 100 fs) to two populations: bound charges and free charges. The former do not lead to photocurrent in a photovoltaic cell; they recombine geminately within 2 ns and are a loss channel. However, the latter can be efficiently extracted in photovoltaic cells. Therefore, we find that the probability of ultrafast free charge formation after exciton quenching directly limits solar cell efficiency. This probability is low in disordered P3HT:PCBM blends but approaches unity in annealed blends.     

Chlorinated polymer solar cells simultaneously enhanced by fullerene and non-fullerene ternary strategies

To achieve efficient polymer solar cells(PSCs)with full utilization of the whole spectrum,the multicomponent devices are of great importance to be deeply explored,especially for their capability of one-step fabrication.However,the research about one same binary system simultaneously derivated various multi-component PSC is still very limited.Herein,we achieved the whole constructions from one binary host to different ternary systems and even the quaternary one.The ternary strategies with fullerene acceptor,PC₇₁BM,and non-fullerene acceptor,BT₆IC-BO-4Cl,as the third component,both boosted the device efficiencies of PBT4Cl-Bz:IT-4F binary system from about 9% to comparatively beyond 11%.Despite the comparable improvement of performance,there existed other similarities and differences in two ternary strategies.In detail,the isotropic carrier transport of PC₇₁BM which largely elevated the fill factor(FF)in the corresponding devices,while the strong absorption of BT₆IC-BO-4Cl enhanced the short current density(J_SC)most.More interestingly,quaternary devices based on PBT4Cl-Bz:IT-4F:PC71 BM:BT₆IC-BO-4Cl could combine both advantages of fullerene and non-fullerene ternary strategies,further pumped the J_SC from 16.44 to the highest level of 19.66 mA cm^-2 among all devices,eventually resulted in an optimized efficiency of 11.69%.It reveals that both fullerene and non-fullerene ternary strategies have their unique feature to elevate the device performance either by efficient isotropic carrier transport or better coverage of whole sunlight spectrum and easy tunable energy levels from organic materials.The key is how to integrate the two pathways in one system and provide a more competitive solution facing high-quality PSCs.     

Study of barrier height inhomogeneity at zinc oxide/polymer:fullerene interface in polymer solar cells

Dark current density‐voltage (J‐V) characteristics of polymer solar cell with inverted structure have been measured in the temperature range 190 to 350 K. Ideality factor (n) and dark saturation current (J₀) have been extracted from forward bias J‐V characteristics at different temperatures. The ideality factor is found to decrease, and J₀ increases with the increase in temperature. Estimated zero‐bias barrier height (Φ_B) with the temperature also shows similar trend like J₀. This observed behavior is attributed to the presence of inhomogeneous Schottky barrier at the ZnO/polymer:fullerene interface. Further, this has been confirmed that the barrier height inhomogeneities at the interface have Gaussian distribution with mean zero‐bias barrier height  = 1.15 eV and zero‐bias standard deviation σ_S0 = 0.155 V. We calculated the Richardson constant (A*) using modified versus 1/T plot and obtained value as approximately 48.11 A cm⁻² K⁻², which is close to the value taken from the literature.     

Transport and recombination dynamics studies of polymer/fullerene based solar cells

We have studied the electron/hole transport and recombination dynamics in blends of poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene], (MDMO-PPV) and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) at room temperature, as a function of laser excitation density and PCBM concentration. The experimental results of these studies indicate the important role played by hole-trap states in MDMO-PPV. Electron and hole transport are not balanced within the blend. PCBM is a less disordered material than MDMO-PPV and electron transport dominates the response of the solar cell device.     

High-efficiency single and tandem fullerene solar cells with asymmetric monofluorinated diketopyrrolopyrrole-based polymer

Design and synthesis of low bandgap(LBG) polymer donors is inevitably challenging and their processability from a non-halogenated solvent system remains a hurdle to overcome in the area of highperformance polymer solar cells(PSCs).Due to a high aggregation tendency of LBG polymers,especially diketopyrrolopyrrole(DPP)-based polymers coupled with bithiophenes in the polymer backbones,their widespread adoption in non-ha logena ted solvent-processed PSCs has been limited.Herein,a novel LBG DPP-based...     

An acrylated fullerene derivative for efficient and thermally stable polymer solar cells

The continuous microstructure evolution occurring in active layers of polymer-fullerene solar cells is one of the main causes for their device instability. With aim to tackle it, this work developed a new polymerizable fullerene acceptor, [6,6]-phenyl-C₆₁-butyl acrylate (PC₆₁BA). It was found that PC₆₁BA has similar light-absorption properties and HOMO and LUMO energy levels as [6,6]-phenyl-C₆₁-butyric acid methyl ester (PC₆₁BM), and can be converted into insoluble oligomers upon heating at 150 °C. Polymer-fullerene solar cells using poly(3-hexylthiophene) (P3HT) as donor and PC₆₁BA as acceptor exhibited an optimized efficiency of 3.54%, the performance comparable to P3HT/PC₆₁BM cells (optimized efficiency: 3.70%). But, the former possess much better thermal stability than the latter owing to aggregation suppression by the polymerized PC₆₁BA. These results indicate that PC₆₁BA, unlike most previous reported, is a unique polymerizable fullerene derivative that can be used alone as acceptor to achieve both efficient and thermally stable polymer solar cells.     

Dihydronaphthyl-based [60]fullerene bisadducts for efficient and stable polymer solar cells

Dihydronaphthyl-based [60]fullerene bisadduct derivative, NC(60)BA, was synthesized at mild temperature in high yield. NC(60)BA not only possesses a LUMO energy level 0.16 eV higher than PC(61)BM but also has amorphous nature that can overcome thermal-driven crystallization. The fabricated P3HT:NC(60)BA-based polymer solar cells exhibit superior photovoltaic performance and thermal stability compared to PC(61)BM-based devices under the same conditions.     

Hydrogen-bonded network: An effective approach to improve the thermal stability of organic/polymer electro-optic materials

Preparation of PMMA-co-PHPMN-(4-hydroxyphenyl)maleimide was prepared according tothe literature [1]. The monomer mixtures, comprising of 0.6g N-(4-hydroxyphenyl)maleimide, 0.4 g MMA and 0.004 g , ′-azobisisobutyronitrile (AIBN) were dissolved in 2 mLDMF. Air above the monomers was swept out using thefreeze-pump-thaw procedure three times and filled with     

Orthogonal solubility in fully conjugated donor-acceptor block copolymers: Compatibilizers for polymer/fullerene bulk-heterojunction solar cells

Donor-acceptor (D-A) type fully conjugated block copolymer systems have been rarely reported due to the challenges in synthetic approaches to prepare well-defined low-polydispersity products. In this work, fully conjugated block copolymers are synthesized in a one-pot reaction through Stille coupling polycondensation, by utilizing the end-functional polymer copolymerization method. End-functional P3HT are copolymerized with AA (2,7-dibromo-9-(heptadecan-9-yl)-9H-carbazole) and BB (4,7-bis(5-(trimethylstannyl)thiophen-2-yl)benzo[c][1,2,5]thiadiazole, TBT) type monomers, respectively. The orthogonal solubility between the very soluble P3HT donor and the insoluble PCDTBT acceptor block improves the purity of block copolymers as well as distinct nano-scale phase-separation compared with other reports on miscibility of donor and acceptor polymer block. Further purification via preparative GPC is carried out to remove the excess of unreacted P3HT and free PCDTBT as well as to achieve low polydispersity of block copolymers. The chemical structure of the P3HT-b-PCDTBT block copolymers are verified via ¹H-NMR, and further confirmed by FTIR spectra. The block copolymer shows broad absorption and moderate optical band gap of 1.8 eV. Furthermore, the fully conjugated block copolymer films exhibit significant fine structures, much smoother film morphology compared to P3HT/PCDTBT polymer blends. By adding a small amount of block copolymer P3HT-b-PCDTBT as a compatibilizer into the bulk-heterojunction of P3HT:PC₆₁BM blends, polymer solar cells with an 8% increase of short circuit current (J _sc and 10% increase of power conversion efficiency (PCE) are achieved owing to the improvement of the active-layer film morphology. To the best of our knowledge, this is the first report on donor-acceptor type fully conjugated block copolymer as an effective ternary additive in polymer: fullerene bulk heterojunction solar cells.     

Broad absorbing low-bandgap polythiophene derivatives incorporating separate and content-tunable benzothiadiazole and carbazole moieties for polymer solar cells

Three novel low-bandgap (LGB) conjugated polythiophenes (PThBTD_mCz_n) incorporating separate and content-tunable benzothiadiazole and carbazole moieties have been designed and synthesized for application in bulk heterojunction polymer solar cells (PSCs). The absorption spectral, thermal, electrochemical and photovoltaic properties of the random copolymers were investigated. Broad absorption from a single polymer covering the visible region from 300 to 800 nm was observed, which was ideal for highly efficient harvesting of the solar spectrum. DSC analysis showed that the polymers readily crystallized, indicating highly ordered intermolecular packing, which is beneficial for efficient charge-carrier transport. Electrochemical studies indicate desirable HOMO/LUMO levels that enable a high open-circuit voltage while blending them with fullerene derivatives as electron acceptors. Polymer solar cells using 1:1 or 1:2 wt/wt polymer: PC₆₁BM (methanofullerene [6,6-phenyl C61-butyric acid methyl ester] blends as the photoactive layers were fabricated and characterized. The preliminary investigation on the photovoltaic device of the PThBTD_mCz_n polymers gave similar power conversion efficiency of 1.1-1.2% with V_oc of 0.64-0.68 V under simulated solar light AM 1.5 G (100 mW/cm²).     

聚合物太阳能电池材料研究进展

本文介绍了几种常见的聚合物太阳电池材料。综述了聚合物太阳电池材料的合成、发展历史和现状,对其应用前景进行了展望。参考文献59篇。     

Competition between the charge transfer state and the singlet states of donor or acceptor limiting the efficiency in polymer:fullerene solar cells

We study the appearance and energy of the charge transfer (CT) state using measurements of electroluminescence (EL) and photoluminescence (PL) in blend films of high-performance polymers with fullerene acceptors. EL spectroscopy provides a direct probe of the energy of the interfacial states without the need to rely on the LUMO and HOMO energies as estimated in pristine materials. For each polymer, we use different fullerenes with varying LUMO levels as electron acceptors, in order to vary the energy of the CT state relative to the blend with [6,6]-phenyl C61-butyric acid methyl ester (PCBM). As the energy of the CT state emission approaches the absorption onset of the blend component with the smaller optical bandgap, E(opt,min) ≡ min{E(opt,donor); E(opt,acceptor)}, we observe a transition in the EL spectrum from CT emission to singlet emission from the component with the smaller bandgap. The appearance of component singlet emission coincides with reduced photocurrent and fill factor. We conclude that the open circuit voltage V(OC) is limited by the smaller bandgap of the two blend components. From the losses of the studied materials, we derive an empirical limit for the open circuit voltage: V(OC) ? E(opt,min)/e - (0.66 ± 0.08)eV.     

Enhancing the healing ability and charge transport thermal stability of a diketopyrrolopyrrole based conjugated polymer by incorporating coumarin groups in the side chains

In this paper, we present a new design strategy for healable polymeric semiconductors, which are demanding for the future flexible electronics, by incorporating coumarin groups in the polymer side chains. The selection of coumarin groups is based on the fact that photo-dimerization can occur to coumarins upon UV light irradiation, thus side chains of conjugated polymers with coumarins can be cross-linked. The photo-crosslinking of side chains has negligible effect on the thin film morphology and interchain packing order for the DPP-based conjugated polymer PDPP4T-DCM with coumarins in the side chains. However, the photo-crosslinking can facilitate the repair of the mechanically damaged thin film of PDPP4T-DCM and the recovery of the semiconducting properties. Additionally, the photo-crosslinking due to the coumarins in the side chains can lock thin film morphology and thus improve the thermal stability of charge transport.     

Enhancing the thermal stability of silica-mineralized wood via layer-by-layer self-assembly

Journal of Thermal Analysis and Calorimetry - Employing a combination of a layer-by-layer self-assembly and sol gel methods, a negatively charged silica sol was successfully deposited into the cell...     

Intrinsic thermal stability of inverted perovskite solar cells based on electrochemical deposited PEDOT

Thermal stability of perovskite materials is an issue impairing the long-term operation of inverted perovskite solar cells(PSCs). Herein, the thermal attenuation mechanism of the MAPb I3films that deposited on two different hole transport layers(HTL), poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS) and poly(3,4-ethylenedioxythiophene)(PEDOT), is comprehensively studied by applying a heat treatment at 85 °C. The thermal stress causes the mutual ions migration of I, Pb and Ag t...     

Enhancing the device performance of Sb2S3-sensitized heterojunction solar cells by embedding Au nanoparticles in the hole-conducting polymer layer

Performance of Sb(2)S(3)-sensitized heterojunction solar cells is enhanced by embedding Au nanoparticles in the poly-3-hexylthiophene (P3HT) hole-conducting polymer layer. The improved charge transfer/transport at the Sb(2)S(3)/P3HT/Au interface by extended interface area of the P3HT/Au counter electrode and the re-absorption of the backscattering light from the embedded Au nanoparticles enhanced the device performance: J(sc) 11.0 to 12.8 mA cm(-2), V(oc) 606 to 626 mV, fill factor (FF) 60.5 to 61.2%, and power conversion efficiency (η) 4.0 to 4.9%. Simultaneous enhancement of V(oc), J(sc), and FF in Au nanoparticle-embedded systems is mainly attributed to the improved charge collection efficiency and light harvesting efficiency of Sb(2)S(3) due to the improved charge transfer/transport in the Sb(2)S(3)/P3HT/Au interface.     

Aqueous-processed insulating polymer/nanocrystal solar cells with effective suppression of the leakage current and carrier recombination

As one of the most environmentally friendly photovoltaic(PV) conversion equipments,aqueousprocessed CdTe nanocrystal solar cells(NC SCs) have attracted great interest in recent years because of their excellent properties such as high charge-carrier mobility and broad absorption.However,two issues including interfacial recombination and leakage current seriously restrict their performance.In this paper,insulating polymer poly(vinyl pyrrolidone)(PVP) is introduced into CdTe NC SCs to solve the problems.The experimental results of transmission electron microscopy(TEM),atomic force micro scopy(AFM) and dark current measurements,etc.,demonstrate the leakage current is effectively suppressed by introducing PVP.Through further designing device structure,the reduction of interfacial recombination after introducing PVP is confirmed.By strategically taking the advantages of PVP properties(e.g.,water solubility and thermostability),the power conversion efficiency of the devices with PVP is enhanced by almost 37% compared to pure CdTe devices.This work demonstrates an effective and low-cost method to fabricate NC SCs via aqueous route.Moreover,it also proves that appropriate content of insulating polymer is of beneficial in promoting the PV performance.     

Role of gadolinium(III) complex in improving thermal stability of polythiophene composite

This paper involves the preparation of polythiophene (PTP) and its composite by the oxidative polymerisation method by using ferric chloride as an oxidant and thiophene monomer. The gadolinium(III) complex obtained by the refluxing technique was used as dopant in the PTP matrix. On the basis of the spectroscopic characterisation, seven-coordinate geometry is proposed for the complex. Conductance measurement confirms the non-selectrolyte nature of complex. The PTP and its composite were subjected to FTIR, X-ray diffraction and scanning electron microscope techniques. The powder X-ray diffraction pattern showed the high crystalline nature of the complex which in turn developed a good degree of crystallinity in the PTP composite. The average particle size was calculated as 4.655 Å and 3.737 Å for the dopant and PTP composite, respectively, by using Debye Scherrer’s equation. Thermal analysis was performed by thermogravimetric (TG) analysis, differential thermal analysis (DTA) and differential scanning calorimetry (DSC) techniques. The TG, DTA and DSC results were well-correlated. The thermal analysis revealed the high thermal stability of the dopant which in turn improved the thermal stability of the PTP composite, revealing the potential of the composite for high temperature applications.     

Employing end-functional polythiophene to control the morphology of nanocrystal-polymer composites in hybrid solar cells

A poly(3-hexylthiophene) containing an interacting amino chain end enhances the performance of P3HT/CdSe solar cells by increasing the dispersion of CdSe nanocrystals and improving the morphology of the nanocomposite without introducing insulating surfactants.