Induced halogenation of alkyl cyclohexenyl ketones involving metal halides,hydrohalogenic acids,and hydrogen peroxide

The induced halogenation and hydroxyhalogenation of alkyl cyclohexenyl ketones in a system [MHlg + HHlg or HHlg]-H₂O₂ or in NaOCl was performed and optimum reaction conditions were established. Under mild conditions the electrophilic addition of the halogen or the acid occurred at the multiple bond of the ring with the formation of the corresponding dihalo or hydroxyhalo derivatives of cycloaliphatic ketones. From the compounds obtained epoxy- and dioxyketones of aliphatic series were prepared. Chloro(bromo)hydrins of ketones from the alkylcyclohexane series and oxiranes based thereon are reactive compounds and can be employed as synthons in the organic synthesis.     

Synthesis of Mannich type products via a three-component coupling reaction

The reactions of alkyl nitriles, acetyl chloride, aldehydes and β-ketoesters or simple ketones was studied for the one-pot synthesis of β-acetamido carbonyl compounds. It was observed that the reaction proceeds in the absence of Lewis acids. However, a Lewis acid catalyzes the reaction and several were tested. It was found that whereas Cu(OTf)₂ is suitable for the coupling of β-ketoesters with aldehydes, Sc(OTf)₃ is the best for ketones. A possible mechanism is proposed based on the isolation and characterization of an intermediate.     

Solvent directed electrophilic iodination and phenylselenenylation of activated alkyl aryl ketones

A mixture of molecular iodine and phenyliodine(III) bis(trifluoroacetate) (BTI) in CH₃CN (or CH₃OH) iodinates the aromatic ring of some activated alkyl aryl ketones. A different outcome results if PhSeSePh is used instead of I₂ in the presence of BTI. In CH₃CN the aromatic phenylselenenylation is still observed while in CH₃OH the formation of α-phenylseleno ketones occurs followed by the conversion of these intermediates into the corresponding α,α-dimethoxycarbonyl compounds, in moderate to good yields.     

Generation of alkyl hypochlorites in oxidation of alcohols with carbon tetrachloride catalyzed by vanadium and manganese compounds

Primary alcohols and diols with various structures were subjected to transformations into esters, aldehydes, ketones, and lactones under the action of carbon tetrachloride in the presence of manganese compounds (MnCl₂, MnO₂, Mn(OAc)₂, Mn(acac)₃) and vanadium compounds (VCl₅, V₂O₅, VO(acac)₂) as catalysts. These transformation proceeded with the involvement of alkyl hypochlorites, which were generated in the course of oxidation of alcohols with carbon tetrachloride catalyzed by manganese or vanadium compounds. The optimum molar ratios between the catalyst and reagents were determined, and the reaction conditions for the highly selective synthesis of esters, aldehydes, ketones, and lactones from alcohols were found.     

Pyrazinium Di(hydrogen sulfate) as a Novel,Highly Efficient and Homogeneous Catalyst for the Condensation of Enolizable Ketones with Aldehydes,Acetonitrile and Acetyl Chloride

A highly efficient protocol for the synthesis of β‐acetamido ketone or ester derivatives in the presence of pyrazinium di(hydrogen sulfate) {Py(OSO₃H)₂} as a novel, green and homogeneous solid acid catalyst at room temperature is described. One‐pot multi‐component condensation of enolizable ketones or alkyl acetoacetates with aldehydes, acetonitrile and acetyl chloride affords the title compounds in high to excellent yields and in relatively short reaction times. In this work, the efficiency of our recently reported solid acid catalyst, saccharin sulfonic acid (Sa‐SO₃H), in the synthesis of β‐acetamido ketones/esters is also studied. Moreover, in this research, some new β‐acetamido ketones and esters (i.e. one complex structure) are prepared.     

Lewis Acid Induced α-Alkylation of Carbonyl Compounds

Carbonyl compounds undergo α-alkylation via the corresponding silyl enol ethers using S_N1 active alkyl halides or acetates in the presence of Lewis acids. This methodology extends the scope of carbonyl chemistry considerably, since S_N1 active alkylating agents are generally base sensitive and therefore unsuitable for reactions with enolate anions or nitrogen analogs. A prime example is the α-tert-alkylation of aldehydes, ketones and esters.     

Practical one-pot preparation of ketones from aryl and alkyl bromides with aldehydes and DIH via Grignard reagents

Various diaryl ketones, alkyl aryl ketones, and dialkyl ketones were efficiently prepared in good yields by the reactions of the Grignard reagents derived from aryl or alkyl bromides, followed by the reactions with aromatic or aliphatic aldehydes and the subsequent treatment with 1,3-diiodo-5,5-dimethylhydantoin and K₂CO₃, in a one-pot method. The same treatment of aromatic bromides bearing electron-withdrawing groups, such as ester, nitrile, ketone, and nitro groups with i-PrMgCl·LiCl or PhMgCl instead of Mg, also provided the corresponding diaryl and alkyl aryl ketones in good yields. The above methods are simple and practical transition-metal-free methods for the preparation of various diaryl ketones and alkyl aryl ketones bearing electron-rich aromatic groups and electron-deficient aromatic groups, as well as dialkyl ketones.     

Oxone/CaCl2/TEMPO体系在温和条件下对醇的氧化反应

Oxone/TEMPO/CaCl₂ (TEMPO＝2,2,6,6-Tetramethyl-1-piperidinyloxy)是一种稳定安全和易得的氧化催化体系, 在室温条件下, 可以氧化苄基或烷基醇生成醛或酮. 苄基伯醇很容易被氧化成相应的醛, 有较高的反应收率(90%～96%), 仲醇氧化成相应的酮, 收率在81%～85%之间, 1,4-丁二醇环氧化生成γ-丁内酯得到了94%的收率.     

MeOH or H2O as efficient additive to switch the reactivity of allylSmBr towards carbonyl compounds

A variety of carbonyl compounds were treated by allylSmBr (allylSmBr) with MeOH as the cosolvent to have further insights on the previously reported reductive coupling of aryl ketones mediated by Sm/alkyl halide/MeOH. The results demonstrate that the real reducing species in Sm/alkyl halide/MeOH system should be allylSmBr, and MeOH has elegantly switched the reactivity of allylSmBr from being nucleophilic to being good reductive coupling reagent. Besides, H₂O was also found to be a useful additive to realize the pinacol coupling of aliphatic aldehydes and ketones promoted by allylSmBr.     

A rhodium‐catalyzed route for oxidative coupling and cyclization of 2‐aminobenzyl alcohol with ketones leading to quinolines

2‐Aminobenzyl alcohol undergoes oxidative cyclization with aryl(alkyl), alkyl(alkyl) and cyclic ketones in dioxane at 80° in the presence of a catalytic amount of RhCl(PPh₃)₃ along with KOH to afford the corresponding quinolines in good yields. The catalytic pathway seems to be proceeded via a sequence involving initial oxidation of 2‐aminobenzyl alcohol to 2‐aminobenzaldehyde by a rhodium catalyst, cross aldol reaction between 2‐aminobenzaldehyde and ketones, and cyclodehydration.     

Conjugate addition of unactivated thiols to α,β-unsaturated ketones catalyzed by a bifunctional rhenium(V)–oxo complex

ReOCl₃(OPPh₃)(S(CH₃)₂) has been found to be an efficient bifunctional catalyst for the 1,4-addition of thiols to α,β-unsaturated ketones. The addition of thiophenol derivatives and alkyl thiols proceeds under mild reaction conditions without pre-activation of the thiol or exogenous base. Reactions of aryl, alkyl, and cyclic enones produce the corresponding β-sulfanyl ketones in good to excellent yield.     

Ketones from Nickel‐Catalyzed Decarboxylative,Non‐Symmetric Cross‐Electrophile Coupling of Carboxylic Acid Esters

Synthesis of the C?C bonds of ketones relies upon one high‐availability reagent (carboxylic acids) and one low‐availability reagent (organometallic reagents or alkyl iodides). We demonstrate here a ketone synthesis that couples two different carboxylic acid esters, N‐hydroxyphthalimide esters and S‐2‐pyridyl thioesters, to form aryl alkyl and dialkyl ketones in high yields. The keys to this approach are the use of a nickel catalyst with an electron‐poor bipyridine or terpyridine ligand, a THF/DMA mixed solvent system, and ZnCl₂ to enhance the reactivity of the NHP ester. The resulting reaction can be used to form ketones that have previously been difficult to access, such as hindered tertiary/tertiary ketones with strained rings and ketones with α‐heteroatoms. The conditions can be employed in the coupling of complex fragments, including a 20‐mer peptide fragment analog of Exendin(9–39) on solid support.     

Ketones from Nickel‐Catalyzed Decarboxylative,Non‐Symmetric Cross‐Electrophile Coupling of Carboxylic Acid Esters

Synthesis of the C?C bonds of ketones relies upon one high‐availability reagent (carboxylic acids) and one low‐availability reagent (organometallic reagents or alkyl iodides). We demonstrate here a ketone synthesis that couples two different carboxylic acid esters, N‐hydroxyphthalimide esters and S‐2‐pyridyl thioesters, to form aryl alkyl and dialkyl ketones in high yields. The keys to this approach are the use of a nickel catalyst with an electron‐poor bipyridine or terpyridine ligand, a THF/DMA mixed solvent system, and ZnCl₂ to enhance the reactivity of the NHP ester. The resulting reaction can be used to form ketones that have previously been difficult to access, such as hindered tertiary/tertiary ketones with strained rings and ketones with α‐heteroatoms. The conditions can be employed in the coupling of complex fragments, including a 20‐mer peptide fragment analog of Exendin(9–39) on solid support.     

Rhizopus arrhizus-mediated asymmetric reduction of arylalkanones: unusual anti-Prelong products with benzyl alkyl ketones

Rhizopus arrhizus-mediated microbial reduction of various aryl alkyl ketones afforded chiral carbinols in good yields and high enantiomeric purity. The most striking feature was the formation of the anti-Prelog (R)-alcohols with the benzyl alkyl ketones, while the other ketones ArXCOR (X = (CH₂)_n, n = 0 or 2, OCH₂ or SCH₂ and R = Me/Et/n-Bu) furnished (S)-alcohols.     

Activated Monomers and Nucleophilic Reagents in Addition and Polymerization Reactions

A number of examples of addition and polymerization reactions is presented with special emphasis on the chemical behaviors of activated monomers and/or activated nucleophilic reagents. Lithium alkoxyethanolate forms a complex with lithium alkyl. Spectroscopic studies showed this complex to possess agent-separated ion pairs. The nature of the complex is characterized by the enhanced reactivity of styrene in the copolymerization reaction with butadiene initiated by the complex. Magnesium alkyl can be sufficiently activated by magnesium alkoxyethanolate to polymerize styrene and diene. Aluminum alkyl and zinc alkyl are able to induce the anionic polymerization of vinyl ketones, but not of unsaturated esters or nitriles. Aluminum or zinc alkoxyethanolates fail to activate their corresponding metal alkyls. Bipyridyl, sparteine, triphenylphosphine, HMPT, and related Lewis bases, however, activate aluminum alkyl enough to react with carbon-carbon double bonds of the unsaturated esters and nitriles. Crotononitrile can be polymerized by the AIR₃-HMPT system to form a colorless polymer, where possible side reactions between CN and AIR₃ are prevented by HMPT. Mutual activation through complex formation is confirmed by a model system of a vinyl ketone with organozinc compounds. AIR₃-HMPT does not polymerize vinyl ketones because of a lack of complex formation. N-Carboxy-α-alanine anhydride (NCA) can be polymerized with zinc alkyl as initiator. The formation of activated NCA by proton abstraction from the NH group is shown to be the essential stage for polymerization. Zinc alkyl is also activated by conventional acid anhydrides. The propylene oxide ring can be cleaved with the ZnR₂-phthalic anhydride system, which is the initiation step in the alternate copolymerization between propylene oxide and the acid anhydride. The propagation mechanism of the CO₂-epoxide copolymerization is also discussed.     

Metal‐Free and Redox‐Neutral Conversion of Organotrifluoroborates into Radicals Enabled by Visible Light

Converting organoboron compounds into the corresponding radicals has broad synthetic applications in organic chemistry. To achieve these transformations, various strong oxidants such as Mn(OAc)₃, AgNO₃/K₂S₂O₈, and Cu(OAc)₂, in stoichiometric amounts are required, proceeding by a single‐electron transfer mechanism. Established herein is a distinct strategy for generating both aryl and alkyl radicals from organotrifluoroborates through an S_H2 process. This strategy is enabled by using water as the solvent, visible light as the energy input, and diacetyl as the promoter in the absence of any metal catalyst or redox reagent, thereby eliminating metal waste. To demonstrate its synthetic utility, an efficient acetylation to prepare valuable aryl (alkyl) methyl ketones is described and applications to construct C?C, C?I, C?Br, and C?S bonds are also feasible. Experimental evidence suggests that triplet diacetyl serves as the key intermediate in this process.     

Synthesis of hydrogenated indazole derivatives starting with α,β-unsaturated ketones and hydrazine derivatives

The reaction of hydrazine derivatives with α,β-unsaturated ketones, such as cyclohexenyl(phenyl)methanone and (E)-2-benzylidenecyclohexanone, were investigated.The reaction between methylhydrazine and e.g., cyclohexenyl(phenyl)methanone was particularly interesting as 3a,4,5,6,7,7a-hexahydro-1-methyl-3-phenyl-1H-indazole was obtained as the major product together with 4,5,6,7-tetrahydro-2-methyl-3-phenyl-2H-indazole as a minor product.     

Rearrangement of N-acylspirocycloalkylbenzothiazolines. A new example of nitrogen→carbon acyl migration.

In boiling dimethyl sulfoxide (DMSO) the title compounds $\text{1}$ rearrange to ω(benzothiazolyl)alkyl,aryl(or alkyl)ketones $\text{3}$.     

Preparation of (η5-C5H5)2Ti alkyl compounds and reactions with unsaturated substrates

Reaction of Cp₂TiCl with RLi (R = ?CH₃, ?C₂H₅, ?n-C₄H₉, ?s-C₄H₉, ?t-C₄H₉) yields the thermally instable Ti^III compounds Cp₂TiR. Reaction of these compounds with 2,6-xylylisocyanide, phenylisocyanate or carbon dioxide results in insertion of these ligands into the Tialkyl bond with formation of iminoacyl, amido and carboxylato derivatives, respectively. In the reaction with ketones a pinacol-type dimerisation is observed.     

Generation of Aryl(2‐lithiophenyl)methanone O‐Methyl Oximes and Their Use for the Synthesis of N‐(3‐Alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines via the Reaction with Nitriles

An efficient two‐step procedure for the preparation of a new type of 1H‐isoindoles, i.e., N‐(3‐alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines 5 , from readily available aryl(2‐bromophenyl)methanones 1 has been developed. Aryl(2‐bromophenyl)methanone O‐methyloximes 2 , derived from the corresponding ketones, were treated with BuLi in Et₂O at 0° to generate novel lithium compounds, aryl(2‐lithiophenyl)methanone O‐methyloximes 3 , which were allowed to react with nitriles to give the desired products 5 in moderate‐to‐fair yields.